Products | Lenox - Saw Blades

Filters

• Applicable Materialsarrow_drop_down
  • Stainless and Mild Steel, Cast Iron, Copper, Brass, Aluminum, Plastic, Wood and Composition Board
  • Ceramic Tile, Fiberglass, Laminates and Other Abrasive Materials
  • Wood, Steel, Stainless Steel, Cast Iron, Fiber Cement and Plaster
• Arbor Sizearrow_drop_down
  • 5/8 in
  • 2L/3L/6L/7L
• Body Materialarrow_drop_down
  • Tungsten Carbide
  • Carbide
• Chuck Sizearrow_drop_down
  • 1/4 in
  • 3/4 in
• Cutting Deptharrow_drop_down
  • 1-7/8 in
  • 1-1/2 in
• Cutting Edge Materialarrow_drop_down
  • Bi-Metal
  • Carbide
• Cutting Edge Stylearrow_drop_down
  • Toothed
  • Tipped
• Diameterarrow_drop_down
  • 2-1/4 in
  • 3 in
  • 4-1/2 in
  • 6 in
• Drill Sizearrow_drop_down
  • 1/4 in
• Manufacturerarrow_drop_down
  • Lenox
• Materialarrow_drop_down
  • Carbide
• Number of Piecesarrow_drop_down
  • 11
  • 6
• Overall Lengtharrow_drop_down
  • 3-1/4 in
  • 1-5/8 in
• Shank Sizearrow_drop_down
  • 1/2 in
• Shank Typearrow_drop_down
  • Hex
• Specificationsarrow_drop_down
  • 3/4 Dia Minimum Saw, 3 in Dia Maximum Saw, Toothed Edge, Tile and Stainless Steel Applicable Material
  • 7/8 Dia Minimum Saw, 2-1/2 in Dia Maximum Saw, Toothed Edge, Tile and Stainless Steel Applicable Material
  • 3/4 Dia Minimum Saw, 2-1/4 in Dia Maximum Saw, Toothed Edge, Tile and Stainless Steel Applicable Material
• Speedarrow_drop_down
  • 30/40/80/110/300 rpm
  • 30/60/80/100 rpm
• TPI or Pitcharrow_drop_down
  • 4.5/5.5 TPI
  • 3 TPI
• Typearrow_drop_down
  • Large
  • Medium
  • Multi-Purpose
• Use Arborarrow_drop_down
  • 2L, 6L Snap-Back™, 2L, 3L, 6L or 7L Standard
  • 2L Snap-Back and 2L, 7L Standard
  • 2L, 6L SNAP-BACK/2L, 3L, 6L, 7L Standard