Products | Milwaukee Tool - Holemaking

Filters

• Applicable Materialsarrow_drop_down
  • Metal, Plastic and Wood
  • Concrete, Masonry and Reinforced Concrete
  • Concrete and Masonry
  • Block, Brick and Concrete
  • Block, Brick, Masonry and Softer Aggregate Concrete
  • Block, Brick, Concrete and Masonry
  • Concrete, Brick and Block
  • Concrete
• Applicationarrow_drop_down
  • For fast removal of the concrete dust from the hole
  • Conical Anchor, Concrete Screw, Nail-In and Hollow Wall Anchor Applications
  • For drilling holes in all types of wood for pipe, vents, gas lines and bulk wire routing
  • For use on drywall, ferrous metal, plastic, tile and wood materials
  • For metal, wood and plastic applications
  • For use on metal, wood and plastic materials
  • For conical anchor, concrete screw, nail-in and hollow wall anchor applications
  • For used with hammer drill
  • For use with hammer drills and impacts
  • For any trade that demands woodcutting for installing pipe and conduit applications
  • For bores clean holes at any angle in wood, plastic, plywood and Formica applications
• Colorarrow_drop_down
  • Silver
  • Black
• Country of Originarrow_drop_down
  • DE
  • CN
• Cutting Deptharrow_drop_down
  • 3-5/8 in
  • 4 in
  • 16 in
  • 10 in
  • 2 in
• Cutting Directionarrow_drop_down
  • Right Hand
• Cutting Edge Materialarrow_drop_down
  • HSS
  • Carbide
  • Alloy Steel
  • High Carbon Steel
• Diameterarrow_drop_down
  • 1-3/8 in
  • 1-1/2 in
  • 2 in
  • 2-1/8 in
  • 2-9/16 in
  • 1 in
  • 1-1/4 in
  • 3/4 in
• Dimensionsarrow_drop_down
  • 1-1/2 in L x 7-1/4 in W x 9 in H
  • 6 in L
• Drill Bit Functionarrow_drop_down
  • Percussion
• Drill Bit Sizearrow_drop_down
  • 1/4 in
  • 3/16 in
  • 3/8 in
  • 7/16 in
  • 1/2 in
  • 7/8 in
  • 2-9/16 in
  • 5/32 in
  • 5/16 in
• Drill Diameter Measurement Systemarrow_drop_down
  • Imperial
• Drill Point Anglearrow_drop_down
  • 135 deg
• Drill Size - Decimal Incharrow_drop_down
  • 0.375 in
• Drill Size - Fractionarrow_drop_down
  • 3/8 in
• Drill Stylearrow_drop_down
  • Self-Feed
  • Stubby
• Finisharrow_drop_down
  • Black Oxide
  • Uncoated
  • Black
  • Bright
  • Anti-Rust Coated
  • Cobalt
  • Titanium Coated
• Flute Lengtharrow_drop_down
  • 3-5/8 in
  • 4 in
  • 16 in
  • 10 in
  • 2 in
• Flute Typearrow_drop_down
  • Parabolic
  • Spiral
  • Twisted
  • Wide
  • Flat
  • Variable
• Includesarrow_drop_down
  • (2) Replaceable Blades, (2) Feed Screws, (2) Set Screws and (1) Hex Wrench
  • (3) Selfeed Bit Blades, (1) Feed Screw, (2) Set Screws, (1) Hex Wrench and (1) Storage Case
  • (2) 1/16 in, (2) 5/64 in, (1) 3/32 in, (1) 7/64 in, (2) 1/8 in, (1) 9/64 in, (1) 5/32 in, (1) 11/64 in, (2) 3/16 in, (1) 13/64 in, (1) 7/32 in, (1) 15/64 in, (2) 1/4 in, (1) 5/16 in, (1) 3/8 in and 1/2 in Thunderbolt Black Oxide Drills
  • 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 11/64 in, 3/16 in, 13/64 in, 7/32 in, 1/4 in, 9/32 in, 5/16 in and 3/8 in Thunderbolt Black Oxide Drills
  • (2) Removable and Replaceable Feed Screws
  • 1-1/8 in, 1 in, 1/2 in, 3/4 in, 3/8 in, 5/8 in, 7/8 in Flat Boring Bit, 6 in Quick-Lock Extension and Carrying Case
• Lengtharrow_drop_down
  • 5-1/2 in
  • 12 in
• Manufacturerarrow_drop_down
  • Milwaukee Tool
• Materialarrow_drop_down
  • HSS
  • Solid Carbide
  • Steel
  • Carbide
  • HSS/Hardened Steel Blade
  • Hardened Steel
  • Alloy Steel
  • High Carbon Steel
  • Cobalt
• Maximum Drill Bit Sizearrow_drop_down
  • 1/2 in
  • 3/8 in
  • 1 in
• Mfg Standards/Approvalsarrow_drop_down
  • ANSI Specified
  • ARRA Compliant|Buy American Act Compliant
  • ANSI Specified|ARRA Compliant|Buy American Act Compliant
• Minimum Drill Bit Sizearrow_drop_down
  • 1/16 in
  • 5/32 in
  • 9/16 in
• Number of Flutesarrow_drop_down
  • 4
• Number of Piecesarrow_drop_down
  • 21
  • 15
  • 8
  • 23
  • 29
  • 7
  • 6
  • 3
  • 13
• Overall Lengtharrow_drop_down
  • 5 in
  • 6 in
  • 18 in
  • 12 in
  • 4 in
  • 4-1/2 in
  • 3-5/8 in
  • 6-3/16 in
  • 6-3/8 in
• Package Heightarrow_drop_down
  • 9.5 in
  • 18.75 in
  • 1.5 in
  • 0.54 in
  • 16.11 in
  • 0.75 in
  • 3.0 in
  • 1.38 in
  • 2.75 in
  • 1.9 in
  • 1.75 in
  • 0.4 in
  • 0.59 in
  • 16.75 in
  • 6.63 in
  • 6.75 in
  • 8.5 in
  • 2.0 in
• Package Lengtharrow_drop_down
  • 0.4 in
  • 0.42 in
  • 0.44 in
  • 0.5 in
  • 0.88 in
  • 10.25 in
  • 16.11 in
  • 0.54 in
  • 3.75 in
  • 1.5 in
  • 8.0 in
  • 7.8 in
  • 8.86 in
  • 2.0 in
  • 0.16 in
  • 2.75 in
  • 0.33 in
  • 12.0 in
• Package Weightarrow_drop_down
  • 0.1 lb
  • 0.13 lb
  • 0.17 lb
  • 0.18 lb
  • 0.23 lb
  • 1.45 lb
  • 0.75 lb
  • 0.25 lb
  • 0.4 lb
  • 0.55 lb
  • 0.6 lb
  • 0.65 lb
  • 0.7 lb
  • 0.99 lb
  • 0.29 lb
  • 1.27 lb
  • 1.02 lb
  • 0.08 lb
  • 0.2 lb
  • 0.14 lb
  • 0.06 lb
  • 0.04 lb
  • 1.1 lb
  • 0.45 lb
  • 0.76 lb
  • 0.92 lb
  • 0.15 lb
  • 0.11 lb
  • 2.0 lb
  • 0.16 lb
• Package Widtharrow_drop_down
  • 2.13 in
  • 2.19 in
  • 2.0 in
  • 7.88 in
  • 1.25 in
  • 10.5 in
  • 10.0 in
  • 10.11 in
  • 6.99 in
  • 8.86 in
  • 4.0 in
  • 2.25 in
  • 2.5 in
• Point Anglearrow_drop_down
  • 135 deg
• Point Typearrow_drop_down
  • Split
  • Centering
  • Self-Centering
• Seriesarrow_drop_down
  • M/2
  • SwitchBlade
  • SHOCKWAVE
• Shank Sizearrow_drop_down
  • 25/64 in
  • 7/16 in
  • 1/4 in
  • 3/8 in
  • 3/16 in
  • 1/2 in
  • 5/32 in
  • 5/16 in
  • 13/32 in
• Shank Typearrow_drop_down
  • 3-Flat
  • SDS Plus
  • SDS
  • Hex
  • Quick-Change Hex
  • SDS-Plus
• Specificationsarrow_drop_down
  • 1/4 in Shank
  • 3-Flat Shank, Parabolic Flute, 135 deg Split Point
  • 6 in OAL, 1/4 in Hex Shank
  • 3-Flat Shank
  • Split Point, 2-Flute
  • 4 in Drilling Depth
  • 3-Flat, Round Shank, 1/32 in Step Increment, 2 Flutes
  • 1/4 in Hex Shank
  • 10.39 in L, 135 deg Point
• Suitable For Use Witharrow_drop_down
  • 1/4 in Shank
  • SwitchBlade Self Feed Drill Bit
  • SwitchBlade 2-9/16 in Self-Feed Bit
  • QUIK-LOK Universal Extension Bit
  • Hammer Drill Drivers
  • All Drill
• System of Measurementarrow_drop_down
  • Imperial
  • SAE
• Typearrow_drop_down
  • 4-Cutter
  • 2-Cutter Heavy Duty
  • 2-Cutter
  • 2-Cutter Single Tip
  • Universal
  • 2-Cutter Standard
  • 5-Piece
  • Single Ended
  • Standard
  • Heavy Duty Standard
  • Heavy Duty
  • Masonry Single Ended
  • Spade
  • Impact Duty