Products | General Wire Spring - Plumbing Power Tools

Filters

• Actuatorarrow_drop_down
  • Foot Switch, Pneumatic
• Applicationarrow_drop_down
  • Small Drains, Inside Work, On Roofs
  • For drain cleaning
  • Clearing Stacks, Downspouts, Mains, Drain Lining Jobs and Electric Machine
  • For starting drill to get water flowing
  • For starting drill to gets sharp turns in small lines
  • For removing loose objects
  • For removing loose objects designed to go down waste, not up stack
  • For converts standard cutter to downhead cutter
  • Cutting and Scraping
  • Cutting, Scraping, Roots and Other Stoppages
  • For roots and other stoppages
  • For Removing Loose Objects and Broken Cables, Drain Cleaning
  • For cutting and scraping
• Cable Diameterarrow_drop_down
  • 0.375 in
• Circuit Breakerarrow_drop_down
  • 20 amp
• Colorarrow_drop_down
  • Black
  • Silver
• Connection Typearrow_drop_down
  • EL Basin Plug Head
  • Male x Female
  • Ridgid Sectional Type
• Control Typearrow_drop_down
  • Air Foot Pedal
  • Water-Proof Air Foot Switch
• Cord Typearrow_drop_down
  • Vinyl Covered
• Country of Originarrow_drop_down
  • US
  • GB
• Deptharrow_drop_down
  • 8"
• Dimensionsarrow_drop_down
  • 1/4 in x 25 ft
  • 27 in D x 18-1/2 in W x 46 in H (26 in H folded)
  • 27 in D x 18-1/2 in W x 46 in H
  • 22 in W x 26 in D x 41 in H
  • 18 in W x 24 in D x 38 in H
  • 16 in W x 20 in D x 38 in H
  • 1.25 x 2 x 2.25 in
• Drum Capacityarrow_drop_down
  • 25 ft of 1/4 in Cable
  • 50 ft of 1/4 or 5/16 in, 35 ft of 3/8 in Cable
  • 100 ft x 9/16 in, 75 ft x 5/8 in
  • 100 ft x 9/16 in
  • 100 ft of 3/4 or 5/8 in Cable
  • 75 ft of 3/8 in Cable
• Drum Materialarrow_drop_down
  • Steel
  • Aluminum
• Finisharrow_drop_down
  • Silver
  • Silver/Black
  • Black
• Foot Switcharrow_drop_down
  • Pneumatic
• Frequencyarrow_drop_down
  • 50/60 Hz
• Heightarrow_drop_down
  • 8"
  • 3 in
• Horsepowerarrow_drop_down
  • 1/2 hp
  • 1/3 hp
• Includesarrow_drop_down
  • (1) Case, 25HE1 25 ft x 1/4 in, 25HE2 25 ft x 3/8 in Cables, (1) HECS Cutter Set and (1) Cartridges
  • Cutter Holder, 75EM4 cable
  • (1) Power Cable Feed, (1) Guide Tube, (1) 5/8 in x 100 ft (100EM4) Cable and (1) SRCS Cutter Set
  • Model 75EM2 Cable and MRCS Cutter Set, Power Cable Feed
  • MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft Power Cord with GFCI, Waterproof Air Foot Switch, Leather Gloves
  • Trigger Assembly Only
• Input Currentarrow_drop_down
  • 14 amp Low 20 amp High
• Input Voltagearrow_drop_down
  • 120v
• Manufacturerarrow_drop_down
  • General Wire Spring
• Materialarrow_drop_down
  • Steel
• Maximum Runarrow_drop_down
  • 75 ft
  • 100 ft
• Mfg Standards/Approvalsarrow_drop_down
  • cULus Listed
  • cUL Listed
• Motorarrow_drop_down
  • 1/3 hp
• Output Currentarrow_drop_down
  • 320 amp Low 400 amp High
• Output Voltagearrow_drop_down
  • 3.5 volt Low 4.3 volt High
• Package Weightarrow_drop_down
  • 31.0 lb
  • 115.0 lb
  • 92.0 lb
  • 43.0 lb
  • 80.0 lb
  • 0.1 lb
  • 0.2 lb
  • 0.12 lb
  • 0.3 lb
  • 0.4 lb
• Phasearrow_drop_down
  • Single
• Power Cable Feedarrow_drop_down
  • Variable speed up to 20 ft per minute
• Power Cordarrow_drop_down
  • 20 ft w/Ground Fault Circuit Interrupter
• Recommended Cables*arrow_drop_down
  • 2 - 20 ft. #1 AWG 2 - 50 ft. #2/0 AWG
• Seriesarrow_drop_down
  • Economy
• Sizearrow_drop_down
  • 3/8 in Dia x 75 ft L
  • 1/2 in Dia
  • 5/8 in Dia
  • 1 in
  • 1-1/2 in
  • 2 in
  • 2-1/2 in
  • 3 in
  • 4 in
  • 2 in Dia
  • 4 in Dia
• Specificationsarrow_drop_down
  • 1-1/4 in Blade
  • 2 in Blade
  • 4 in Blade
• Speedarrow_drop_down
  • 0 to 500 rpm
  • 165 rpm
• Suitable For Use Witharrow_drop_down
  • SV-A-WC, SV-F in
  • Floor Model Machine
  • 5/16, 3/8 in Cable and 1-1/4 to 2 in Pipe
  • 3/8, 1/2, 9/16 in Cable and 1-1/2 to 3 in Pipe
  • 1/2, 5/8, 3/4 in Cable and 2 to 4 in Pipe
  • 5/8, 3/4 in Cable and 3 to 4 in Pipe
  • 5/8 in Cable w/R Connector, 1-1/4 to 2 in Pipe
  • 5/8 in Cable w/R Connector, 1-1/2 to 3 in Pipe
  • 7/8 in Cable w/R Connector, 2 to 4 in Pipe
  • 7/8 in Cable w/R Connector, 3 to 4 in Pipe
  • 5/8, 3/4 in Cable and 4 to 6 in Pipe
  • 5/8, 3/4 in Cable and 6 to 10 in Pipe
  • 7/8 in Cable w/R Connector, 4 to 6 in Pipe
  • 5/16, 3/8, 1/2 and 9/16 in Cable
  • 5/16 and 3/8 in Cable
  • 5/16, 3/8 in Cable, 1-1/2 to 3 in Pipe
  • 1/2, 9/16, 5/8 and 3/4 in Cable
  • ClogChopper Multi-Function Cutting Tools
  • 5/8 and 3/4 in Cable
  • 3/8, 1/2 and 9/16 in Cable
  • 5/8 and 3/4 in Cable, 3 to 6 in Pipe
  • Mini Rooter Drain Machine
  • General Mini Rooter and Mini Rooter XP
• Switch Typearrow_drop_down
  • Forward-off-reverse
• Thawing Capacityarrow_drop_down
  • 1/2" - 1-1/2" x 175 ft. Max
• Tool/Kitarrow_drop_down
  • Tool Only
  • Kit
• Typearrow_drop_down
  • Heat Treated
  • Self Sharpening Multi-Function
  • Flexible
  • Down Head
  • Side
  • Heavy Duty
  • Small Corkscrew
  • Large Corkscrew
• Warrantyarrow_drop_down
  • 1 Year
  • 1 yr
  • Limited
  • Limited 1 yr
• Weightarrow_drop_down
  • 4 lb
  • 31 lbs
• Weight (Without Cable)arrow_drop_down
  • 92 lb
• Wheel Brakearrow_drop_down
  • Positiv e
• Wheel Sizearrow_drop_down
  • 10 in
  • 8 in
  • 6 in
• Wheel Typearrow_drop_down
  • Semi-Pneumatic
• Wheelsarrow_drop_down
  • 10 in
• Widtharrow_drop_down
  • 8"
  • 1 in
• Wleelsarrow_drop_down
  • 10 in Heavy Duty With Roller Bearings