Loading ...

Loading ...

Search in: Nu-Calgon

Packaging Size: 2+1 Display Pack
Color: Clear colorless, Odor: Slight Ethereal, Specific Gravity: 1.206 (10.06 lbs/gal), Solubility in Water: 0.4%, Vapor Pressure: 5.5 psia at 20o C /77o F, Boiling Point: 41°C/106°F, Evaporation Rate: (ether = 1):>1, Packaging Size: 2 lb. canister, % Volatile by Weight: 100%, Physical Form: liquid, Vapor Density (air=1): 3.4
Packaging Size: Injection Valve
Flow Rate: 1.0 gpm, Pressure: 20 psi minimum and 125 psi maximum, Maximum Temperature: 100 ºF, Packaging Size: Micro-Carbon 4
Color: Green, Appearance: Clear, Odor: Lime, pH: 10.5, Packaging Size: 1 quart spray bottle, Bulk Density: 8.63, Form: Liquid, Physical state: Liquid
Color: Black, Odor: slight characteristic, Solubility in Water: none, Temperature Range: -30°F to 200°F, Packaging Size: 2" x 1/8" x 30’ Roll, Physical Form: Solid
Color: Gray, Odor: None, Specific Gravity: 1.30 +/- .05 g/cc, Solubility in Water: Solid, Packaging Size: 3/8" x 25’ Roll, Physical Form: Soft, pliable, pressure sensitive material, Freezing Point: Solid°C/Solid°F
Color: Straw, Appearance: Clear, Odor: mild aromatic, Flash Point: 148.9 °F (64.94 °C), Specific Gravity: 0.88, Solubility in Water: Insoluble, Boiling Point: 599.00 °F (315 °C), Packaging Size: 1 box 2 fl. ounce liquid, Form: Liquid, Physical state: Liquid Rx-Acid Scavenger provides a better, more convenient way to neutralized or scavenge acid in refrigeration, air conditioning systems after burnouts or during normal on-going systems maintenance, Normal dosage rate is 2 fl. oz. of Rx-Acid Scavenger for up to one gallon of system oil., That is 50% less than other acid neutralizing products., This low treat feature means far less material has to be added to the systems., Rx-Acid Scavenger is formulated for use with all lubricants - mineral, alkylbenzene and polyol ester., Use after system burnout to scavenge acid products in the system, or change a system with Rx-Acid Scavenger to neutralize acid conditions should they develop., Eliminates acid build-up, Compatible with all oils and refrigerants (except ammonia), Protects against future acid contamination, Helps prevent compressor burnout, Half the dose needed versus other brands, Easy to use pressurized and liquid packages, One kit for all oils: Use with: Mineral oil, Alkylbenzene oil, POE oil, Application:, Acid neutralizer for air conditioning & refrigeration systems:, For compressor burnout, For system maintenance, One kit for all oils. Use with:, Mineral oil, Alkylbenzene oil, POE oil
Color: Yellow, Appearance: Fluorescent, Odor: Odourless, Flash Point: > 104.4 °C (> 220.0 °F), pH: 8.1 - 8.5, Packaging Size: 1 quart spray bottle, Form: Liquid, Physical state: Liquid, Viscosity: 375 cPs High viscosity formulation to enhance contact time, Non-corrosive to metals, Can be used at temperatures up to 225 F, Freeze protected to 5 F, Fluorescence for improved visibility, Long-lasting bottles, Suitable for all refrigerants, natural gas and oxygen, Available in easy-to-use spray quart bottle and gallons, Sprayer is fully engaged in bottle. No need to hunt for loose sprayers
Packaging Size: Micro-Plus 2, Contaminant: Chlorine, Average Effluent: 0.7 mg/1 (ppm), Average Influent: 2 mg/l, Coffee Makers Capacity: 25 lbs. of coffee (1,250 cup)/wk, Gallons per Day: 12.5, Ice Makers Capacity: Up to 125 lbs. of ice/day, NSF Standard 42 Reduction Class: Class II, Operating Pressure Min/Max: 20-125 psi, Operating Temperature Min/Max: 40°-80°F, Percent Reduction: 63% Eliminate lime scale formation, Remove silt, sediment and other suspended matter, Remove chlorine and other objectionable tastes and odors, Complete treatment for up to six months
Packaging Size: Micro-Plus 4, Contaminant: Chlorine, Average Effluent: 0.43 mg/l (ppm), Average Influent: 2 mg/l, Coffee Makers Capacity: 50 lbs. of coffee (2,500 cups)/wk, Gallons per Day: 25, Ice Makers Capacity: Up to 250 lbs. of ice/day, NSF Standard 42 Reduction Class: Class I, Operating Pressure Min/Max: 20-125 psi, Operating Temperature Min/Max: 40°-80°F, Percent Reduction: 79% Eliminate lime scale formation, Remove silt, sediment and other suspended matter, Remove chlorine and other objectionable tastes and odors, Complete treatment for up to six months
Color: Straw colored, Appearance: Clear, Odor: Mild petroleum, Flash Point: 165.55 °C (330 °F), Specific Gravity: 0.9129, Solubility in Water: Negligible, Vapor Pressure: < 0.001 mmHg @ 20°C, Melting Point: -42.77 °C (-45 °F), Boiling Point: > 260 °C (> 500.00 °F), Packaging Size: 1 Gallon, Physical Form: Liquid, Form: Liquid, Viscosity: 157.2 SUS @ 100°F, Vapor Density: > 5, Auto-Ignition Temperature: 343 °C (649.40 °F)
Color: Straw colored, Appearance: Clear, Odor: Mild petroleum, Flash Point: 165.55 °C (330 °F), Specific Gravity: 0.9129, Solubility in Water: Negligible, Vapor Pressure: < 0.001 mmHg @ 20°C, Melting Point: -34.44 °C (-30 °F), Boiling Point: > 260 °C (> 500.00 °F), Packaging Size: 1 Gallon, Physical Form: Liquid, Form: Liquid, Viscosity: 314.1 SUS @ 100°F, Vapor Density: > 5, Auto-Ignition Temperature: 343 °C (649.40 °F)
Color: Colorless, Appearance: Clear, Odor: Characteristic, Packaging Size: 1 box, Form: Liquid, Physical state: Liquid
Color: grey to white, Appearance: paste, Odor: Odorless, Specific Gravity: 1.02, Vapor Pressure: 15.5 mmHg, Packaging Size: 11 ounce Tube, Physical state: Liquid, Viscosity: Viscous Thermo-Trap is referred to as a heat sink as it has an extremely high capacity for absorbing heat., Applied to the metal working surface between the area being heated and the material to be protected, it soaks up heat and reduces heat transfer., This keeps heat from spreading beyond the work area. Heat-sensitive components, installed fittings, etc., on the other side of Thermo-Trap stay cool and are not damaged by transmitted heat., Easy to use, Will not melt or run, Odorless, Harmless to skin and clothing, Cleans up easily, Will not stain work surfaces, Adheres to all surfaces
Color: Gray, Odor: None, Specific Gravity: 1.30 +/- .05 g/cc, Solubility in Water: Solid, Packaging Size: 2 lb box, Physical Form: Soft, pliable, pressure sensitive material, Freezing Point: Solid°C/Solid°F
Color: Black, Odor: None, Specific Gravity: 0.05-.32, Solubility in Water: Negligible, Vapor Pressure: <0.01 mm Hg @ 25°C S, Temperature Range: -20°F to 160°F, Packaging Size: 2" x 1/8" x 30’ Roll, % Volatile by Weight: <1%, Physical Form: Expanded rubber
Color: Yellow, Appearance: Liquid, Odor: Characteristic, Flash Point: None to boiling, Specific Gravity: 1.2, Solubility in Water: Complete, pH: 14 (Concentrate), Boiling Point: 212.00 °F (100 °C), Packaging Size: 1 gallon bottle, Form: Liquid, Physical state: Liquid, Freezing Point: 32.00 °F (0 °C), Percent volatile: 77 Provides more foam than any condenser coil cleaner in the market, Ultimate cleaning and brightening while it foams, Use it in place of the more dangerous HF acid-based products
Color: Blue, Appearance: Liquid, Odor: Characteristic, Mild, Flash Point: None to boiling, Specific Gravity: 1.242 ± 0.005, Solubility in Water: Complete, pH: 14 (Concentrate), Boiling Point: 212.00 °F (100 °C), Packaging Size: 1 gallon bottle, Form: Liquid, Physical state: Liquid, Freezing Point: 32.00 °F (0 °C), Percent volatile: 76 A non-acid, alkaline-based product for cleaning and brightening air cooled condensers, High foaming, Brightens the condenser coils extremely well, It is formulated with the best available foaming detergents and chelants to quickly penetrate and dissolve greasy dirt and grime and foam it right out of the coil, Cuts through grease and grime better than acids, Safer than acids, Biodegradable, Authorized by the U.S.D.A.
Color: Milky, Appearance: Compressed liquefied gas, Odor: Lemon lime, Vapor Pressure: 65 Psi @ 70°F, pH: 12.3, Boiling Point: 388.40 - 401.00 °F (198 - 205 °C), Packaging Size: 18 ounce can, Form: Aerosol, Physical state: Gas The aerosol product can be sprayed either right side up or upside down, and is ideal for use on most coils, but particularly suited for cooling or evaporator coils, Cleans and deodorizes, Pleasant lemon scent, Self-rinsing, fast-breaking foam, Biodegradable and NSF Registered
Color: Blue, Appearance: Clear, Odor: Characteristic, Flash Point: > 220 °F (> 104.44 °C), Specific Gravity: 1, Solubility in Water: Complete, pH: 8.1 - 8.5 (Concentrate), Boiling Point: 212.00 °F (100 °C), Packaging Size: 1 quart spray bottle, Form: Liquid, Physical state: Liquid, Viscosity: 375 CPs, Freezing Point: 15.80 °F (-9 °C), Percent volatile: 78 High viscosity formulation to enhance contact time, Non-corrosive to metals, Two freeze-protected versions, Cal-Blue Plus (5 F) and Cal-Blue LT, (-20 F), Can be used at temperatures, up to 225 F, Long-lasting bubbles, Will not effect Ultraviolet (black) lights, Available in easy-to-use spray quart bottles and gallons, Suitable for all refrigerants, natural gas and oxygen, Sprayer is fully engaged in bottle. No need to hunt for loose sprayers
Color: White, Appearance: Aerosol, Odor: Solvent, Specific Gravity: 0.77 - 0.81, Solubility in Water: Negligible, Vapor Pressure: 55 - 65 psig @ 20°C, Temperature Range: 10ºF to 250ºF, Evaporation Rate: > 1 (BuAc=1), Packaging Size: White - 16 ounce can, Form: Aerosol, Physical state: Gas, Vapor Density: >= 1, Auto-Ignition Temperature: 246 - 480 °C (474.8 - 896 °F), Flammability limits in air, lower, % by volume: > 1 Pan-Spray is an effective, easy-to-use water proof rubberized coating that won t chip, flake, or peel., It s ideal for sealing out rust and corrosion as well as repairing leaky condensate pans, cooling towers, swamp coolers, roofing, gutters, and down spouts, Contains no CFC s, Reliable rubberized coating, Quick and economical answer to repair troublesome leaks, Stays flexible and won t freeze or sag, Dries in 20 to 30 minutes, Ideal for sealing out both rust and corrosion, Can be painted
4190-08.jpg Cal-Green Coil Cleaner, 1 Gallon Bottle
Locke Part #: M2600MFG Part #: 4190-08
Color: Clear green, Appearance: Clear green liquid, Specific Gravity: 1.04, pH: 8.5-9.5, Boiling Point: 212°F, Evaporation Rate: Equal to water, Physical State: Liquid, Solubility In Water: soluble in water, Package: 1 Gallon Bottle, Flammability (Solid, Gas): Liquid-not applicable
Color: Clear green, Appearance: Clear green liquid, Specific Gravity: 1.00, pH: 8.40-8.90, Boiling Point: 212°F, Evaporation Rate: Equal to water, Physical State: Liquid, Solubility In Water: soluble in water, Package: 1 Gallon Bottle, Flammability (Solid, Gas): Liquid-not applicable
61308.jpg A/C Drain Sucker Kit
Locke Part #: M2602MFG Part #: 61308
Color: Orange, Appearance: Clear orange liquid, Odor: Pine/licorice, Specific Gravity: 1.18, pH: 13.6 (Concentrate), Boiling Point: 212°F, Evaporation Rate: Equal to water, Density: 9.87 lb/gal, Physical State: Liquid, Solubility In Water: soluble in water, Flammability (Solid, Gas): Liquid-not applicable, Dynamic Viscosity: 60 cps
Appearance: Ordinary oily odor, clear liquid (lubricant additive), Boiling Point: > 300C(>572F) at atmospheric pressure (lubricant additive), <-43F(42C) (gas only), Solubility In Water: Negligible, Package: 4 fluid oz unpressurized can, Specific Gravity (H2O=1): 1.05 (lubricant additive), 1.6 (liquefied gas)
Product Image Not Available EASY SEAL DIRECT INJECT 4050-08
Locke Part #: M2606MFG Part #: 4050-08
Packaging Size: 1 each For spraying coil cleaners such as Nu-Brite, CalClean, HD CalClean, Alka-Brite Plus, Tri-Pow r HD or any of the other quality Nu-Calgon coil cleaners for cleaning air cooled condensers, evaporator coils, etc., No pre-mixing is necessary as chemical and water are automatically blended in mixing head as you spray., Use for coil cleaning as well as in food preparation areas, wash rooms, or any situation where use of water-diluted chemicals are required., Quick-disconnect feature, 2- quart capacity, Five mix ratio settings - 3:1, 4:1, 6:1, 9:1 & 10:1, Foam wand to enhance foaming, Deflector tip to fan out spray, Connects to optional Coil Gun Probe accessory (4774-1) for 90 degree direction of spray inside the coil, Specifications:, Recommended water pressure, 40 to 60 psi, although 40-90 is acceptable
Capacity: 4 fl. Oz., Max Working Pressure: 600 psi
Packaging Size: Flushing Tool