Loading ...

Loading ...

Search in: OATEY SCS dba/UNITED ELCHEM

R0003.jpgUni-Weld Purple Primer 8 fl. oz.
Locke Part #: R0001MFG Part #: 8756S Compare
Size: 8 fl. oz., Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 14, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8
R0003.jpgUni-Weld Purple Primer 16 fl. oz.
Locke Part #: R0002MFG Part #: 8746S Compare
Size: 16 fl. oz., Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 25, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8
7356S.jpgUni-Weld Clear Primer, 8 fl. oz.
Locke Part #: R0004MFG Part #: 7356S Compare
Size: 8 fl. oz., Appearance: Clear, Odor: Acetone, Flash Point: 0-4°F (based on acetone), Specific Gravity: 0.82 +/- 0.03 @ 20°C, Vapor Pressure: 400 mmHg @ 20°C, Boiling Point: 133°F (56°C), Evaporation Rate: (BUAC = 1) = 7-11, VOC: 510 g/L, Physical State: Liquid, Pack: 24, Vapor Density: 2.0 -2.5, Carton Weight (Lbs): 16, Solubility (H2O): 50-75%, Lower Flammability Limit: 2.0, Upper Flammability Limit: 13.0 Recommended for use with ABS, PVC and CPVC pipe and fittings., Clear Cleaner is formulated to remove dirt and oil from the surface of the piping in preparation for solvent welding., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or, being tested by compressed air or, gases.
7356S.jpgUni-Weld Clear Primer, 16 fl. oz.
Locke Part #: R0005MFG Part #: 7346S Compare
Size: 16 fl. oz., Appearance: Clear, Odor: Acetone, Flash Point: 0-4°F (based on acetone), Specific Gravity: 0.82 +/- 0.03 @ 20°C, Vapor Pressure: 400 mmHg @ 20°C, Boiling Point: 133°F (56°C), Evaporation Rate: (BUAC = 1) = 7-11, VOC: 510 g/L, Physical State: Liquid, Pack: 24, Vapor Density: 2.0 -2.5, Carton Weight (Lbs): 27, Solubility (H2O): 50-75%, Lower Flammability Limit: 2.0, Upper Flammability Limit: 13.0 Recommended for use with ABS, PVC and CPVC pipe and fittings., Clear Cleaner is formulated to remove dirt and oil from the surface of the piping in preparation for solvent welding., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or, being tested by compressed air or, gases.
Size: 4 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 9, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 8 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 16 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 27, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 32 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 8 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases.
Size: 4 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 9, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases.
Size: 16 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 27, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases.
Size: 32 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases.
R0003.jpgUni-Weld Purple Primer 4 fl. oz.
Locke Part #: R0015MFG Part #: 8766S Compare
Size: 4 fl. oz., Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 8, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8
Size: 32 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.95 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 81-85%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6 with interference fit., Polar-Weld PVC Solvent Cement will remain free flowing and maintain fast set-up times at temperatures down to -15 F., Can be used for potable water, sewer and drain, waste and vent systems, Compliant with California South Coast Air Quality Management District Rule 1168 and Ozone Transport Commission regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 8 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.95 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 81-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6 with interference fit., Polar-Weld PVC Solvent Cement will remain free flowing and maintain fast set-up times at temperatures down to -15 F., Can be used for potable water, sewer and drain, waste and vent systems, Compliant with California South Coast Air Quality Management District Rule 1168 and Ozone Transport Commission regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: Gallon, Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 6, Vapor Density: 2.5, Carton Weight (Lbs): 52, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases.
Size: 32 fl. oz., Appearance: Gray, Physical State: Liquid, Pack: 12, Viscosity: minimum 500 cps @ 73° F ± 2° F, Vapor Density: 7.74 ± 0.2 lbs/gallon, Carton Weight (Lbs): 26 Recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
7356S.jpgUni-Weld Clear Primer, 1 Gallon
Locke Part #: R0027MFG Part #: 7324 Compare
Size: Gallon, Appearance: Clear, Odor: Acetone, Flash Point: 0-4°F (based on acetone), Specific Gravity: 0.82 +/- 0.03 @ 20°C, Vapor Pressure: 400 mmHg @ 20°C, Boiling Point: 133°F (56°C), Evaporation Rate: (BUAC = 1) = 7-11, VOC: 510 g/L, Physical State: Liquid, Pack: 6, Vapor Density: 2.0 -2.5, Carton Weight (Lbs): 45, Solubility (H2O): 50-75%, Lower Flammability Limit: 2.0, Upper Flammability Limit: 13.0 Recommended for use with ABS, PVC and CPVC pipe and fittings., Clear Cleaner is formulated to remove dirt and oil from the surface of the piping in preparation for solvent welding., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or, being tested by compressed air or, gases.
R0003.jpgUni-Weld Purple Primer 1 Gallon
Locke Part #: R0028MFG Part #: 8724 Compare
Size: Gallon, Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 6, Vapor Density: 2.5, Carton Weight (Lbs): 46, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8
2066S.jpgPlumb-Tite Blue Cement, 8 fl. oz.
Locke Part #: R0040MFG Part #: 2056S Compare
Size: 8 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564.
2066S.jpgPlumb-Tite Blue Cement, 16 fl. oz.
Locke Part #: R0041MFG Part #: 2046S Compare
Size: 16 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 27, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564.
2066S.jpgPlumb-Tite Blue Cement, 32 fl. oz.
Locke Part #: R0042MFG Part #: 2036S Compare
Size: 32 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564.
2066S.jpgPlumb-Tite Blue Cement, 4 fl. oz.
Locke Part #: R0043MFG Part #: 2066S Compare
Size: 4 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 9, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564.
Size: 4 fl. oz., Appearance: Clear, Physical State: Liquid, Pack: 24, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 9 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 8 fl. oz, Appearance: Clear, Physical State: Liquid, Pack: 24, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 16 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 16 fl. oz., Appearance: Clear, Physical State: Liquid, Pack: 24, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 27 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: Gallon, Appearance: Clear, Physical State: Liquid, Pack: 6, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 52 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases.
Size: 32 fl. oz., Appearance: Gray, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 75-79%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 A heavy duty cement for all PVC pipes & fittings 2" & under. Fast setting. Designed for use in any climate. 2 hour average curing. Brush inside 1/2 pint, pint and quart cans.