Loading ...

Loading ...

Search in: PASCO SPECIALTY & MFG INC

A0440.jpg Chrome Spout
Locke Part #: A0440MFG Part #: 11347
1/2" IPS
C0211.jpg 2 x 5" x 7" Chrome
Locke Part #: C0211MFG Part #: 34514
C0248.jpg 1-1/2" Brass Closet Spud
Locke Part #: C0248MFG Part #: 959
C0252.jpg 1 Pair White Caps
Locke Part #: C0252MFG Part #: 917-PR
C0264.jpg Replaces Any Closet
Locke Part #: C0264MFG Part #: 21013
For 3-1/2" To 4" Sink Opening. 400 Series Stainless Steel Body And Basket With Neoprene Stopper, 1-1/2" Brass Slip Joint Nut, 1-1/2" Poly Washer. Fits Stainless Steel And Cast Iron Sinks
E0008.jpg Sealed-Cartridge Regulator
Locke Part #: E0008MFG Part #: 2195
This cartridge enables delivery of an almost unvarying outlet stream trajectory through upstream pressure variations in a range from 17.5 to 150 psi
E0009.jpg Steady-Stream Bubbler
Locke Part #: E0009MFG Part #: 2194
Unique construction incorporates projector, flow control and on/off push button valve in one unit.
G0250.jpg Hose Grip Washer Connector
Locke Part #: G0250MFG Part #: 5930
Now you can securely connect any washing machine drain hose to standard laundry stand pipe drains.
G0260.jpg 5" Wall C.O. Cover
Locke Part #: G0260MFG Part #: 1842-C
Size: 5" A = Pipe Size, 1-1/4", 1-1/2", 2", 5", 2-1/2", 3", 3-1/2", 4", 7", 5", Extension cover puts the finishing touches to wall clean-outs, and can be painted or papered to match wall. Wall mount - 24 gauge, stainless steel.
G0260.jpg 7" Wall C.O. Cover
Locke Part #: G0261MFG Part #: 1844-C
Size: 7" A = Pipe Size, 1-1/4", 1-1/2", 2", 5", 2-1/2", 3", 3-1/2", 4", 7", 5", Extension cover puts the finishing touches to wall clean-outs, and can be painted or papered to match wall. Wall mount - 24 gauge, stainless steel.
G0262.jpg 1/4" x 4" Flat Head Bolt
Locke Part #: G0262MFG Part #: 1649
Size: 1/4" x 4" Flat head machine screw. Plated.
M83.jpg 1/2" Copper Pipe Strap, 2 Hole
Locke Part #: M0083MFG Part #: 1623
M83.jpg 3/4" Copper Pipe Strap, 2 Hole
Locke Part #: M0084MFG Part #: 1624
M0419.jpg 5 Lb. Box of Oakum Rope
Locke Part #: M0419MFG Part #: 2898
27" cut lengths.
M697.jpg Cone Filter Washer
Locke Part #: M0697MFG Part #: 2244
Fits 3/4" FHT.
M718.jpg 4’ Washing Machine Hose
Locke Part #: M0717MFG Part #: 464
M718.jpg 5’ Washing Machine Hose
Locke Part #: M0718MFG Part #: 465
M0744.jpg 1/2" x 260" Yellow Teflon Gas Tape
Locke Part #: M0744MFG Part #: 9000-100
Eliminates pastes and dope on all material For threads less than 1-1/2".
M1901.jpg Flush Dam Corner
Locke Part #: M1901MFG Part #: 3000
Flush dam corner. Use where a flat wall or stall backing board meets a dam at a 90 angle.
M1903.jpg Top Dam Corner
Locke Part #: M1903MFG Part #: 3003
Top Dam Corner Use where a wide 90 top corner of a two dam stall or roman tub meet.
M83.jpg 1" Copper Pipe Strap, 2 Hole
Locke Part #: M3424MFG Part #: 1625
R0823.jpg 6" Test Caps for SDR35& Sch40
Locke Part #: R0833MFG Part #: 4841
For testing or capping for clean-outs.
S0181.jpg 0-100# Pressure Gauge, 3-1/2" face
Locke Part #: S0181MFG Part #: 1753
1/4 " MPT.
1/4 " MPT.
S0192.jpg 300# Pressure Gauge
Locke Part #: S0192MFG Part #: 1428
Regular pressure hand (shown at zero pushes LAZY hand (shown at 240 mIbs.) to peak operating or surge pressure point
T254.jpg Fountain Wrench
Locke Part #: T0254MFG Part #: 7047
2 in 1 Tool., A must for installing water fountain cartridges! Tightens or loosens cartridge retaining bushing. Prevents bushing thread damage which causes leaks.
T0256.jpg 1/2" Tray
Locke Part #: T0256MFG Part #: 3080
Made of corrosion resistant, heavy epoxy coated metal.
T0256.jpg 3/4" Tray
Locke Part #: T0257MFG Part #: 3081
Made of corrosion resistant, heavy epoxy coated metal.
T0256.jpg 1/2" & 3/4" Combo tray
Locke Part #: T0258MFG Part #: 3091
Made of corrosion resistant, heavy epoxy coated metal.
T0256.jpg 1" Nipple tray
Locke Part #: T0259MFG Part #: 3082
Made of corrosion resistant, heavy epoxy coated metal.
Used for testing gas leaks, can be used instead of a manometer. Complies with Section 319.0 of Uniform Plumbing Code. All parts are precision made & assembled with sealant. 3/4" FTP,2" Gauge. Assembled in USA.
T513.jpg Nickel Plated Torch Lighter
Locke Part #: T0513MFG Part #: 4430
Made of heavy spring wire for long, dependable service. round type file with shield. nickel plated finish, 8".
T1018.jpg 6" Smart Dumbbell
Locke Part #: T1018MFG Part #: 4554
Heavy duty die-cast aluminum dumbbell installs or removes tub drains & closet spuds without crossbars. Fits all 17 modern tub configurations. Doesn t scratch finishes. Made in U.S.A.
T1019.jpg Stem & Cartridge Puller
Locke Part #: T1019MFG Part #: 7040
Removes Moen stems and Moen cartridges from faucets and shower valves. Removes brass cartridges. Removes brass stems. Removes plastic stems & cartridges. Precision made. High quality steel components. One piece construction. Easy to use. Made in U.S.A.
T1021.jpg Drain Wrench
Locke Part #: T1021MFG Part #: 7095
Tightens most fiberglass shower stall drain locknuts and die cast baskets., Fits brass locknuts or brass shower stall drains, Fits 3-1/2 plastic locknuts, Fits 3-3/8 die cast basket strainer locknuts
T1023a.jpg Drain Key With Aluminum Shoes
Locke Part #: T1023MFG Part #: 4500
It s unique expanding design allows The Drain Key to internally grip in a 360 pattern. The drain Key s aluminum shoes will not mar chrome or special finishes. Installs and removes tub drains, closet spuds and pipe nipples., Expands with a crescent wrench to unlock or install:, Bathtub drains, 1-1/4 or 1-1/2 Trap (dirty arm) nipples, 1-1/4 or 1-1/2 closet spuds, Jr. basket strainers, Jr. duo strainers, tray plug drains and duplex strainers, Made in U.S.A.
T1031.jpg Eureka Wrench
Locke Part #: T1031MFG Part #: 4567
This unique tool fits either slotted or square countersunk cleanout plugs. Strong, malleable iron
T1032.jpg 1-1/4" Class 200, Sch.40 & 80
Locke Part #: T1035MFG Part #: 3242
T1480.jpg 1-1/4" Quick Sweat Tool.
Locke Part #: T1484MFG Part #: 51125
T1480.jpg 1-1/2" Quick Sweat Tool.
Locke Part #: T1485MFG Part #: 51150