Loading ...

Search in: RAIN BIRD CORP

Light & durable construction, Side ridges for additional side wall support, Pre-molded pipe slots, Bottom flanges to help prevent sinking, Snap-in overlapping lid, Skid-resistant lid texture, Body built with three ridges for additional support to sidewalls
Light & durable construction, Side ridges for additional side wall support, Pre-molded pipe slots, Bottom flanges to help prevent sinking, Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support
Light & durable construction, Side ridges for additional side wall support, Pre-molded pipe slots, Bottom flanges to help prevent sinking, Drop-in lockable lid, Skid-resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls
Light & durable construction, Side ridges for additional side wall support, Pre-molded pipe slots, Bottom flanges to help prevent sinking, Overlapping lockable lid, Skid-resistant lid texture, Body can be used to extend the PVB Jumbo series, Body can be used as a 6" deep box
6" Diameter Lid for M0785 6" Diameter Lid for M0785
Locke Part #: R2121MFG Part #: A12523L
10" Round Lid Only 10" Round Lid Only
Locke Part #: R2123MFG Part #: A12520L
Light & durable construction, Side ridges for additional side wall support, Pre-molded pipe slots, Bottom flanges to help prevent sinking, Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support
PVB Professional Series 12" Standard Lids PVB Professional Series 12" Standard Lids
Locke Part #: R4122MFG Part #: A12501L / PVBSTDGL
PVB Professional Series 12" Jumbo Lids PVB Professional Series 12" Jumbo Lids
Locke Part #: R4125MFG Part #: A12509L / PVBJMBGL
Low & meduim gallonage pop-up impact rotor sprinklers, Rain Bird's #1 selling pop-up impact sprinkler, Water Saver brass weighted PJ spray guide arm controls stream, prevents side splash onto buildings and walkways, Patented, pressure-activated wiper seal assures reliable pop-up and retraction, Diffuser screw breaks water into smaller droplets for uniform watering, Rugged, high-impact case dimensions: 4 1/8" diameter, 8 5/8" high, Spacing from 26 to 41 feet apart (7,9 to 12,5 m)
Easy arc adjustment from the top requiring only a flat- bladed screwdriver, Pre-installed 3.0 Rain Curtain nozzle, Professional gear-drive, water-lubricated design for durable and reliable operation, Reversing full and part circle rotation from 40 to 360 arc adjustment, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, Thick rubber cover that resists debris and offers the ultimate in safety, Quick check Arc/Fast Forward allows wet or dry arc adjustment, Pressure-activated multifunction wiper seal protects internals from debris and assures positive pop-up retraction, Reinforced flow path for additional side load strength, Additional o-rings and seals for extra protection in "gritty" water, Heavy-duty stainless steel retract spring assures positive pop-down, Self-adjusting stator does not require replacement when changing nozzles
Brass Impact Sprinkler, 1/2" Male Inlet Brass Impact Sprinkler, 1/2" Male Inlet
Locke Part #: S0217MFG Part #: 25PJDA-C
Traditional favorite with classic impact sound, Straight through water flow design for superior dirty water performance, Easy to install and adjust, Brass, bronze, and stainless steel construction lasts longer than competitors' zinc sprinklers, Adjustable deflector flap adjusts stream length from 20-foot (6 m) to 41-foot (12.5 m) radius, Diffuser screw breaks water into smaller water droplets for uniform watering, Die-cast, white bronze PJ spray arm controls stream, prevents side splash onto buildings and walkways
Top-adjust arc adjustment requiring only a flat-bladed screwdriver, This rotor comes with a pre-installed 3.0 Rain Curtain nozzle, Rain Curtain, Nozzle removal feature and easily removable filter screen makes maintenance very simple, Water-lubricated gear-driven design for durable, reliable operation, 40 - 360 Part-circle arc rotation and reversing full-circle rotation in one, Radius adjustment screw allows up to 35% radius reduction without changing nozzles, True 4" (10,2cm) pop-up (measured from center of nozzle), Quick Check Arc/Fast Forward, Dual action, positive stop wiper seal protects internals from debris and assures positive pop-up and retraction, Self-adjusting stator does not require replacement when changing nozzles, Easily removable filter screen, Nozzle removal feature, Arc setting factory preset at 180 for installation convenience
Durable high-impact polymer and stainless steel construction, Full circle (360 degree) or part circle (20 to 340 degree) coverage, with infinite pattern adjustment, Water-Saving PJ spray-guiding arm controls water stream and prevents side splash onto buildings and walkways, Weighted arm for slower rotation and better watering coverage, Straight through flow for superior performance in dirty water conditions, Spacing from 24 to 45 feet, Removable bayonet nozzle for easy cleaning
4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed full-circle pattern (360 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed half-circle pattern (180 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
4 in pop-up sprinkler head helps to clear obstacles for watering, Pre-installed quarter-circle pattern (90 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed square pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed end strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed center strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed side strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
2 1/2 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed full-circle pattern (360 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
2 1/2 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed half-circle pattern (180 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
UL Listed for direct burial in earth and concrete, it can be used with rebar, water pipe, copper tubing and ground rods up to 2 inch in diameter.
Proven impact drive., Straight-through flow for superior performance in dirty water. Five interchangeable, color-coded MPR nozzles with standard trajectory., Two interchangeable low angle (LA) nozzles., Easy to adjust, easy to service., No tools required to change nozzles., Heavy-duty plastic case with sturdy, reinforced ribbed design. Double-weighted arm for slower rotation and increased distance of throw., Self-flushing inner trip with improved inner trip lever. Powerful reverse action., Adjustable arm spring for low-pressure and low-gallonage operation., Energy efficient, low pressure and low-gallonage operation. 360 Full-circle OR arc adjustable from 20 to 340 ., Precision Jet tube (PJ ) minimizes side splash.Hooded bearing for longer life., Distance control diffuser pin., Multi-function, pressure-activated wiper seal., Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction., Combination 1/2" (15/21) or 3/4" (20/27) bottom inlet.Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down., FP trip for full- or part-circle operation., Side or combination bottom inlet for design flexibility. Side inlet installation is not recommended in freezing climates., Serviceable through the top of the case., Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water., Optional nonpotable cover., Combination 1/2 (15/2 1) or 3/4 (20/2 7) female bottom inlet, 1/2 (15/21) female side inlet, Nozzle outlet trajectory is 23, LA nozzle outlet trajectory is 11, Side inlet installation is not recommended in freezing climates, Optional SAM feature holds back up to 10 feet (3,1 m) of elevation change
Rotor Hold-Up Tool With Bubble Level Rotor Hold-Up Tool With Bubble Level
Locke Part #: S0255MFG Part #: HOLDUPTOOL
Combination holdup tool and bubble level makes proper rotor installation easier, Works with Rain Bird 5000 Series, 5500 Series, Falcon 6504, 7005 and 8005 Series Rotors
Rotor Screwdriver & Pull-Up Tool Rotor Screwdriver & Pull-Up Tool
Locke Part #: S0256MFG Part #: ROTORTOOL
The universal Rain Bird rotor tool., Flat blade screwdriver and pull-up tool all in one.
3/4 in. female pipe thread inlet and outlet inline irrigation valve, Buna-N diaphragm offers superior performance in harsh water environments, Reliable, non-clogging design, Reverse Flow design reduces stress on diaphragm for dependable operation, In-line design minimizes pressure loss of dirt and debris during installation and system start-up, Operates automatically or manually with manual bleed screw, Works with any standard sprinkler timer, Designed for below-ground installation, out of sight and away from playful hands, Energy efficient, low power encapsulated solenoid with captured plunger, Inrush: .30 amp, Holding: .19 amp
1 in. female pipe thread inlet and outlet inline irrigation valve, Buna-N diaphragm offers superior performance in harsh water environments, Reliable, non-clogging design, Reverse Flow design reduces stress on diaphragm for dependable operation, In-line design minimizes pressure loss of dirt and debris during installation and system start-up, Operates automatically or manually with manual bleed screw, Works with any standard sprinkler timer, Designed for below-ground installation, out of sight and away from playful hands, Energy efficient, low power encapsulated solenoid with captured plunger, Inrush: .30 amp, Holding: .19 amp
Anti-Siphon (above ground) mounting, 1 in. female threaded inlet and outlet (use 1 in. MPT threaded pipe adapters with Teflon tape), Jar-Top bonnet simplifies cleaning and maintenance, Flow control allows adjusting flow to the zone, optimizing sprinkler performance, 24 VAC, 50/60 Hz automatic operation or manual activation with bleed screw, Buna-N diaphragm offers superior performance in harsh water environments, External bleed to manually flush system of dirt and debris prior to installation and system start-up, Spray-free internal bleed for manual operation, Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability, Heavy duty construction with stainless steel screws, Electrical Specifications:, Inrush - .30 amp, Holding - .19 amp
Diaphragm Repair Kit for DV and DVF Valves Diaphragm Repair Kit for DV and DVF Valves
Locke Part #: S0281MFG Part #: DRKCP/CPF
Diaphragm Repair Kit includes a new black rubber diaphragm assembly with preinstalled diaphragm filter, 1 new solenoid filter, 6 screws, and a spare diaphragm spring., Primary Application: Residential Installation
Swing Pipe, 2’ Coil Swing Pipe, 2’ Coil
Locke Part #: S0290MFG Part #: EZP-2
Primary Application: Residential Installation, Minimizes system depth with large sprinklers, Allows for more accurate positioning of sprinklers, Allows circumvention of obstacles in tough terrain such as trees, rocks, and other barriers, Flexible tubing for easy installation of sprinklers
1/2" Barb x 1/2" Barb Coupling 1/2" Barb x 1/2" Barb Coupling
Locke Part #: S0291MFG Part #: A46006
1/2" M NPT x 1/2" Barb Elbow 1/2" M NPT x 1/2" Barb Elbow
Locke Part #: S0292MFG Part #: A46010
3/4" M NPT x 1/2" Barb Elbow 3/4" M NPT x 1/2" Barb Elbow
Locke Part #: S0293MFG Part #: A46011
1/2" x 6" Cut-Off Riser 1/2" x 6" Cut-Off Riser
Locke Part #: S0294MFG Part #: RISERCO6
Flexible plastic composition allows constant bending without breaking, Cut riser to desired length, Connect underground pipe to sprinkler heads, Not for use under continuous pressure, For outdoor use with cold water only
1/2" x 3/4" x 6" Cut-Off Riser 1/2" x 3/4" x 6" Cut-Off Riser
Locke Part #: S0295MFG Part #: RISERCO075
Flexible plastic composition allows constant bending without breaking, Durable polyethylene construction, Cut riser to desired length, Connect underground pipe to sprinkler heads, Not for use under continuous pressure, For outdoor use with cold water only
1/2" M NPT x 1/2" Barb Adapter 1/2" M NPT x 1/2" Barb Adapter
Locke Part #: S0296MFG Part #: A46003
1/2" F NPT x 1/2" Barb Elbow 1/2" F NPT x 1/2" Barb Elbow
Locke Part #: S0297MFG Part #: A46015
1/2" Barb x 1/2" Barb x 1/2" Barb Tee 1/2" Barb x 1/2" Barb x 1/2" Barb Tee
Locke Part #: S0298MFG Part #: A46004
Fittings are made of robust acetal material to make connecting swing pipe fast and easy., Easy twist-in insertion - no glue or clamps needed for installation., Aggressive barb lip makes a secure connection that is less likely to leak., Broad range of shapes and sizes allow the contractor to choose the best fitting for the application., Extended length and aggressive barb lip prevent blow outs, reducing likelihood of contractor call backs.
High quality, flexible tubing for use in any low-volume irrigation system, 1/2" blank tubing extruded from polyethylene resin materials for consistent durability., UV-resistant for installations at or below grade., Available in green or purple stripe patterns to differentiate zones., Compatible with Easy Fit Compression Fittings or standard 700 series compression fittings., Compact coils for easy storage and shipping.
XF Dripline - 0.6 GPH, 18 in. Spacing, 500 ft. Coil, Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation, Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications, Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings, Use an Air/Vacuum Relief Valve Kit when installation is below soil, The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi, Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage
Superior flexibility allows pipe to be efficiently routed around hardscape, terraces, and uneven terrain to turn landscape design into reality., Textured surface makes product easier to handle, contributing to labor efficiency, especially under wet conditions., Up to 30% more flexible than competitors., Enhanced kink resistance., Quick and easy installation lowers material and labor costs, Installs quickly leaving time for additional system installations and incremental revenue opportunities., Operating pressure up to 80 psi (5, 5 bar) and 110 F (43 C).
Low flow rates allow water to be absorbed as needed., Reduces runoff., Flow will not fluctuate at pressures between 20 and 90 psi., Maintains even flow., Flow is not adjustable for increased vandal resistance., No adjustment required., Corrosion-proof plastic and rubber construction for long life., Shipped with special SR-050 1/2" (15/21) bubbler filter screen for easy installation and resistance to debris., 1/2" (15/21) female threaded inlet
Low flow rates allow water to be absorbed as needed., Reduces runoff., Flow will not fluctuate at pressures between 20 and 90 psi., Maintains even flow., Flow is not adjustable for increased vandal resistance., No adjustment required., Corrosion-proof plastic and rubber construction for long life., Shipped with special SR-050 1/2" (15/21) bubbler filter screen for easy installation and resistance to debris., 1/2" (15/21) female threaded inlet
6 inch Pop-Up Spray Head Sprinklers 6 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0405MFG Part #: A44205
Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets
12 inch Pop-Up Spray Head Sprinklers 12 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0406MFG Part #: A44305
Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets
Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current
Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current
Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current
Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current
UV-resistant thermoplastic construction for long life., Fits all Rain Bird spray heads and nozzles. Exception: Cannot be used with bubblers., Easily installed without any tools., Can be reinstalled without damaging the threads if accidentally knocked off the riser or spray head., Maximum recommended number: two extensions per sprinkler.
4 inch Pop-Up Spray Head with PRS 4 inch Pop-Up Spray Head with PRS
Locke Part #: S0412MFG Part #: A50205
PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets.
PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money. Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.50 gpm (0.11 m3/h; 1.80 l/m) otherwise, Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Built-in Seal-A-Matic (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site., Even stronger retract spring to accommodate elevation changes up to 14 feet (4,2 m). One of the strongest springs in the industry., Co-molded, pressure-activated, multi-functional wiper seal assures positive seal without excess flow-by which enables more heads to be installed on the same valve., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life. Designed for use with all Rain Bird spray head nozzles., Designed for use with all Rain Bird plastic spray head nozzles., 1/2 (15/21) female threaded inlet
6 inch Pop-Up Spray Head with PRS 6 inch Pop-Up Spray Head with PRS
Locke Part #: S0415MFG Part #: A50305
PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets.
12 inch Pop-Up Spray Head with PRS 12 inch Pop-Up Spray Head with PRS
Locke Part #: S0417MFG Part #: A50405
PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets.
PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money. Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.50 gpm (0.11 m3/h; 1.80 l/m) otherwise, Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Built-in Seal-A-Matic (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site., Even stronger retract spring to accommodate elevation changes up to 14 feet (4,2 m). One of the strongest springs in the industry., Co-molded, pressure-activated, multi-functional wiper seal assures positive seal without excess flow-by which enables more heads to be installed on the same valve., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life. Designed for use with all Rain Bird spray head nozzles., Designed for use with all Rain Bird plastic spray head nozzles., 1/2 (15/21) female threaded inlet
Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current
Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current
3/4" NPT Double Lug Valve Key 3/4" NPT Double Lug Valve Key
Locke Part #: S0421MFG Part #: B11801
Key threads into top of quick-coupling valve to provide water access. Available with 3/4double lug assembly with NPT threads.
Industrial-strength brass quick-coupling valves for convenient water access., Strong corrosion-resistant stainless steel spring prevents leakage., Thermoplastic cover for durability., Red brass construction for long life and rugged performance. One-piece body design
Expand the ESP-LXM to eight stations by using SM8 station modules., This easy-to-install module snaps into one of four bays on the controller chassis., Dynamic Station Numbering eliminates numbering gaps between stations for easy, confusion-free programming.
Controller Features:, Large LCD display with easy to navigate softkey user interface, Hot-swappable modules, no need to power down the controller to add/remove modules, Dynamic station numbering eliminates station numbering gaps, Weather Sensor input with override switch, Master valve/pump start circuit, 6 user-selectable languages, Non-Volatile (100- year) program memory, Standard 10kV surge protection, Front panel is removable and programmable under battery power, Compatible with Rain Bird Landscape Irrigation and Maintenance Remote, Water Management Features:, Optional Flow Smart Module with Learn Flow utility and flow usage totalizer, FloWatch protection for high and low flow conditions with user defined reactions, FloManager manages hydraulic demand, making full use of available water to shorten total watering time, SimulStations are programmable to allow up to 5 stations to operate at the same time, Water Windows by program plus Manual MV Water Window, Cycle+Soak by station, Rain Delay, 365-Day Calendar Day Off, Programmable Station Delay by program, Normally Open or Closed Master Valve programmable by station, Weather Sensor programmable by station to prevent or pause watering, Program Seasonal Adjust, Global Monthly Seasonal Adjust, Diagnostic Features:, Alarm light with external case lens, Electronic diagnostic circuit breaker, Variable test program, RASTER station wiring test, Controller Hardware:, Plastic, locking, UV resistant, wall-mount case, Optional Metal Case & Pedestal, Flow Smart Module factory installed or field upgradable, Operating Specifications:, Seasonal Adjust; 0% to 300% (16 hrs maximum station run time), 4 independent programs (ABCD), ABCD programs can overlap, 8 start times per program, Program Day Cycles include Custom days of the week, Odd, Odd31, Even, & Cyclical dates, Manual station, program, test program, Power back-up: Lithium coin-cell battery maintains time and date while nonvolatile memory maintains the programming, Multi-valve capacity: Maximum five 24 VAC, 7VA solenoid valves simultaneous operation including the master valve, maximum two solenoid valves per station, Certifications:, UL, CUL, CE, CSA, C-Tick, FCC Part 15
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Double-filtered pilot-flow design for maximum reliability., Balanced-pressure diaphragm for long life., External bleed to manually flush system of dirt and debris during installation and system start-up., Internal bleed for spray-free manual operation., Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter., Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring., Operates in low-flow and Xerigation applications when the RBY filter is installed upstream., 1.25" (3,2 cm) stainless steel phillips head screws., Accepts latching solenoid for use with Rain Bird battery-operated controllers., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current, Solenoid coil resistance: 38 Ohms, Incorporates all features of DV Series valves, Unique, easy-to-turn pressure-assisted flow control mechanism, Available as 1 (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
Double-filtered pilot-flow design for maximum reliability., Balanced-pressure diaphragm for long life., External bleed to manually flush system of dirt and debris during installation and system start-up., Internal bleed for spray-free manual operation., Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter., Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring., Operates in low-flow and Xerigation applications when the RBY filter is installed upstream., 1.25" (3,2 cm) stainless steel phillips head screws., Accepts latching solenoid for use with Rain Bird battery-operated controllers., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current, Solenoid coil resistance: 38 Ohms, Available as 1 (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
8 to 10 feet Variable Arc Spray Nozzles 8 to 10 feet Variable Arc Spray Nozzles
Locke Part #: S0440MFG Part #: P1001001
Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
10 to 12 feet Variable Arc Spray Nozzles 10 to 12 feet Variable Arc Spray Nozzles
Locke Part #: S0444MFG Part #: P1001201
Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
12 to 15 feet Variable Arc Spray Nozzles 12 to 15 feet Variable Arc Spray Nozzles
Locke Part #: S0450MFG Part #: P1001501
Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
4 inch Pop-Up Spray Head Sprinklers 4 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0451MFG Part #: A44120
Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets
Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California.
120V 4 Station Base Indoor Controller 120V 4 Station Base Indoor Controller
Locke Part #: S0466MFG Part #: F55100
Tailored Watering Schedules:, Extra Simple Programming makes it easy for the crew to meet each landscape s unique needs. With the controller up and running faster than ever before, you ll get more jobs done in less time., Single-Controller Simplicity:, Delay Watering:, Is Mother Nature doing the watering for you Are you having a party and want to make sure the landscape is dry Easily postpone irrigation for up to 14 days. Normal irrigation will resume automatically., Bypass Rain Sensor by Station:, Got a landscaped area under an eave or deck Bypass the rain sensor for that station(s) or for the entire landscape., Seasonal Adjust by Program:, When the seasons change, change with them. Reduce watering down to as little as 5 percent of your scheduled program times or increase it up to 200 percent. Apply to all programs or to each program individually., Total Run Time Calculator by Program:, Calculate the specific amount of time the controller is scheduled to run for a given program. Use it to ensure morning watering is finished before the family wakes up, or reduce your run time to comply with water restrictions., Short Detect/Programming Errors:, The ESP-Me visually notifies you of electrical and programming issues with a bright red LED and scrolling messages across the LCD display., One-Touch Watering:, Need an easy way to turn on the system The ESP-Me offers one-touch watering. With the dial in the AUTO position, just press and hold the right teardrop arrow button., Contractor Default:, Prevent callbacks with Contractor Default. Simply save your programs after setup. If the original watering schedule is overwritten in error, easily restore it in just two steps., User-Friendly Rain Bird Design:, Featuring vibrant colors, an intuitive dial and a bright LCD display, the new ESP-Me is easy on the eyes. And with legendary Extra Simple Programming and the Rain Bird reliability you trust, it s the same easy setup, just better., Input required: 120VAC 10%, 60Hz (International models: 230/240VAC 10%, 50/60Hz), Idle/Off power draw 0.06 amps at 120VAC, Power back-up not required. Nonvolatile memory permanently saves the current programming and a 10 year life lithium battery maintains the controllers time and date during power outages, Seasonal Adjust; 5% to 200%, UL, cUL, CE, CSA, C-Tick, FCC Part 15b, WEEE, S-Mark, IP24 Certifications.
Easily expand the Rain Bird ESP-Modular, ESP-Me, ESP-SMT or ESP-SMTe Series Controller with this 3 station hot-swappable module, which can be added without powering down the controller. Modules can be installed in any available slot.
Plastic model which attaches nozzle to riser to irrigate ground cover and shrub areas., Adapts Rain Bird nozzles for use with 1/2" (15/21) MPT threaded risers, 1/2" (15/21) female inlet threads, Accepts protective, non-clogging 1800 Series filter screen (shipped with nozzle) and PCS Series screens., Durable, non-corrosive plastic construction., Fine top threads accept all Rain Bird nozzles
Unique material offers significantly greater flexibility and kink-resis-tance for fast, easy installation., The bend radius for XFD dripline is 3 no matter which way you bend the tube. Other driplines will bend 4 if bending with the natural curve of the coil and only 7 if bending against the natural curve of the coil., Greater flexibility assures design capability of tight curves and spaces., Accepts Rain Bird Easy Fit Compression Fittings, 17mm insert fittings and LOC fittings., Variety of flow rates, spacing and coil lengths provides design flexibility for a number of non- turfgrass applications., The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi., Dual-layered tubing (brown over black or purple over black) provides unmatched resistance to chemicals, algae growthand UV damage.
Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
Provides convenient 30 psi (2.1 bar) pressure regulation at the riser for any 1/2" FPT emission device or compression adapter., Can be installed above or below grade., Can be used with Xeri-Bird 8 Multi-Outlet Emission Device.