Loading ...

Loading ...

Search in: Rectorseal

97402.jpg1-1/2" Magic Trap with Threaded Tee
Locke Part #: D0531MFG Part #: 97402 Compare
Quantity: 12, Interleaved: 10021449974025, Dimensions (in): 12 x 12 x 12, Cubic Feet: 1.00 A 1-1/2 inch tubular polypropylene fitting., The Magic Trap fitting replaces any standard 1 1/2 inch tubular trap., The Micro size Magic Vent AAV screws directly onto the tee connection of the Magic Trap fitting., It automatically places the Magic Vent at the required 4 inch height above the drain pipe to which it is connected., The installation time for the vent system is approximately 25 seconds., Saves time and money.
Size: 1-3 tons, Quantity: 20, Interleaved: 10021449965030, Dimensions (in): 11.5 × 13.5 × 10, Cubic Feet: 0.90 2-wire design for easy installation, handles 1.0 - 3.0 ton maximum, torque, OEM tested & approved, torque,, Extend the life of compressors, 1.0- 3.0 ton maximum torque Hard Start Device for single phase 208V, 230V and 265V A/C, refrigeration and heat pump compressors., 230V and 265V A/C, refrigeration and heat pump compressors. 021449965033
Size: 3.5 – 5 tons, Quantity: 20, Interleaved: 10021449965061, Dimensions (in): 11.5 × 13.5 × 10, Cubic Feet: 0.90 Potential relay & start capacitor, 2-wire design for easy installation, Extend the life of compressors, OEM tested & approved, 3.5-5.0 ton maximum torque Hard Start Device for single phase 208V, 230V and 265V A/C, refrigeration and heat pump compressors 021449965064
Case Qty: 24, Pallet Qty: 48, Unit Weight: 0.46 lbs, Quantity: 24, Interleaved: 10021449976326, Dimensions (in): 8 x 6 x 8.75, Cubic Feet: 0.24, Std Unit Length: 5.5″, Std Unit Width: 1.75″, Std Unit Heigh: 8.25″, Unit Volume: 79 cu in, Box Qty: 1, Pallet Length: 48″, Pallet Width: 40″, Pallet Height: 44″ Inline, low voltage condensate overflow shutoff switch, Installs vertically or horizontally in primary drain or can be plugged on auxilliary pans, U.S. Patent 6,442,955, Pre-wired with 4-foot, 18 AWG wires. UL 508 complaint., Potted, water sealed reed/magnet switch design, Schedule 40 PVCI plastic components, 2.5 Amp Carry capacity, 1.2 Amp switching capacity, Schedule 40 PVC Slip Fittings Accept 3/4-inch Stub or Drain Line, Primary drains or auxiliary drain outlets 021449976329
Case Qty: 24, Pallet Qty: 24, Unit Weight: 0.3 lbs, Quantity: 24, Interleaved: 10021449976371, Dimensions (in): 8 x 6 x 8.75, Cubic Feet: 0.24, Std Unit Length: 5.5″, Std Unit Width: 1.75″, Std Unit Heigh: 8.25″, Unit Volume: 79 cu in, Box Qty: 1, Pallet Length: 48″, Pallet Width: 40″, Pallet Height: 44″ Primary drains or auxiliary drain outlets, Smaller, L-Shaped switch installs on auxiliary pan outlets and requires no plug, Installs easily in tight spaces and catches clogs in primary pan outlet nipples, Pre-wired with 4-foot 18 AWG wires, U.S., Patent 6,442,955., Potted, water sealed reed/magnet switch design., Schedule 40 PVCI plastic components, 24 VAC, 1.25 Amp switching capacity 021449976374
Quantity: 24, Interleaved: 10021449976937, Dimensions (in): 12 X 20 X 9.52, Cubic Feet: 1.32 Commercial rooftop downflow units, Tested to UL 508 and 2043 - Code compliant, Low power consuming, state-of-the-art microelectronics, Small, Easy to use bracket for roof top units, Onboard LED s indicates the condition of the unit, Automatically resets once water subsides, No moving parts, Simple 2-wire design, Application, Install on primary drain pan when plenum rating is needed, Small size and slim profile great for use on commercial rooftop downflow units 021449976930
Case Qty: 24, Pallet Qty: 24, Unit Weight: 0.2 lbs, Quantity: 24, Interleaved: 10021449976470, Dimensions (in): 8 x 6 x 8.75, Cubic Feet: 0.24, Std Unit Length: 5.5″, Std Unit Width: 1.75″, Std Unit Heigh: 8.25″, Unit Volume: 79 cu in, Box Qty: 1, Pallet Length: 48″, Pallet Width: 40″, Pallet Height: 44″ Condensate overflow switch, Primary & auxiliary drain pans, For installation on safety drain pans, Features a special metal clip, designed for quick secure installation on pan rims, Minimum Pan Depth: 1-1/2 Adjusts for Deeper Pan., Sensitivity: 1/4: rise in float opens switch, Potted, water sealed reed/magnet switch design., UL 508 complaint. U.S. Patent 6,698,215, 1.25 Amp Switching capacity, 24 Volts A/C Class 2 021449976473
Model: NPR4102PK, Carton Qty: 20, Refrigerant: R410, Thread Size: 1/4″, Carton Weight: 2.5 Novents Tamper Resistant caps have become the standard in sealing and protecting Schraeder service valves. Safe guard AC systems efficiency and the environment from lost or accidental mixing of refrigerant gases.
Model: NVMULTIKEY, Carton Qty: 20, Refrigerant: Any, Carton Weight: 2
Model: NPR41010PK, Carton Qty: 10, Refrigerant: R410, Thread Size: 1/4″, Carton Weight: 5 Novents Tamper Resistant caps have become the standard in sealing and protecting Schraeder service valves. Safe guard AC systems efficiency and the environment from lost or accidental mixing of refrigerant gases.
Model: NGR222PK, Carton Qty: 20, Refrigerant: R22, Thread Size: 1/4″, Carton Weight: 2.5 Novents Tamper Resistant caps have become the standard in sealing and protecting Schraeder service valves. Safe guard AC systems efficiency and the environment from lost or accidental mixing of refrigerant gases.
Model: NGR2210PK, Carton Qty: 10, Refrigerant: R22, Thread Size: 1/4″, Carton Weight: 5 Novents Tamper Resistant caps have become the standard in sealing and protecting Schraeder service valves. Safe guard AC systems efficiency and the environment from lost or accidental mixing of refrigerant gases.
86672.jpg5/16" Eurocap Tamper Proof Caps (2 Pack)
Locke Part #: L3012MFG Part #: 86672 Compare
Input Voltage: 20, Thread Size: 5/16″, Carton Weight: 2.5, Refrigerant Type: R410 Novents Tamper Resistant caps have become the standard in sealing and protecting Schraeder service valves. Safe guard your AC systems efficiency and the environment from lost or accidental mixing of refrigerant gases.
Type: Condensate Trap, Includes: Brush, Diameter (In): 3/4", Carton Weight: 4.4, Drop: 1", U Bend Type: Blow Molded 3/4 Economy Blow Molded Trap Kit. The Clear Trap line offers the most comprehensive range of tranparent condensate traps available in a variety of styles for many applications. This thinner walled trap can be used for light duty applications., Carton Contents:, 3/4 Blow Molded Trap, 3/4 Cross, 3/4 Tee, 3/4 Red Cap (2), 1 Red Cap (1), Cleaning Brush
Quantity: 30, Interleaved: 10021449961063, Dimensions (in): 21 x 10 x 13, Cubic Feet: 1.58 Industry Leading Magnetic Float Switch for Metal or Plastic Secondary Drain Pans, High Capacity 5 Amp, 24Volt AC Sensor, Easy, Drill-Free Installation, Residential and Commercial Applications, Protective Housing Keeps Out Insulation, Pests, and Debris, Lift Float Pin Test Knob, Normally Open 3rd Wire for Optional External Alarm, Digital Controller, or Energy Management System, US Patents and Patents Pending, UL 508 Approved 021449961066
Quantity: 30, Interleaved: 10021449961001, Dimensions (in): 22 x 10 x 8, Cubic Feet: 1.02 Industry Leading Magnetic Float Switch for Metal or Plastic Secondary Drain Pans, High Capacity 5 Amp, 24Volt AC Sensor, Easy, Drill-Free Installation, Residential and Commercial Applications, Protective Housing Keeps Out Insulation, Pests, and Debris, US Patents and Patents Pending, Lift Float Pin Test Knob, UL 508 Approved 021449961004
Size: 28” x 57” x 5.25”, Quantity: 10, Outer Dimension (L x W X D): 57.25" x 28.374" x 5.25", Inside (Drip Area) Dimension (L x W X D): 51.75" x 21.5" x 2.0" Goliath Series Secondary Drain Pans are the strongest, most rugged HVAC secondary drain pans on the market today., Made With Pride in the USA from our own patented blend of advanced polymer DexElar material,, Engineered with superior one-piece structural strength to produce a nearly indestructible drain pan with rolled edges and no seams., Provide extreme temperature durability -20 F (-28 C) to 260 F (126.7 C), high tensile strength, crack/split/leak/rust resistance, and are self extinguishing., DexElar material is UL 94-5VA flame retardant and ASTM E-84 Class C rated for flame spread and smoke developed for interior wall and ceiling finishes a superior level of safety and protection compared to traditional HVAC/R secondary drain pan materials. 021449962025
Size: 30” x 62” x 4.25”, Quantity: 10, Outer Dimension (L x W X D): 63.0" x 30.375" x 4.25", Inside (Drip Area) Dimension (L x W X D): 56.875" x 22.75" x 2.1" Goliath Series Secondary Drain Pans are the strongest, most rugged HVAC secondary drain pans on the market today., Made With Pride in the USA from our own patented blend of advanced polymer DexElar material,, Engineered with superior one-piece structural strength to produce a nearly indestructible drain pan with rolled edges and no seams., Provide extreme temperature durability -20 F (-28 C) to 260 F (126.7 C), high tensile strength, crack/split/leak/rust resistance, and are self extinguishing., DexElar material is UL 94-5VA flame retardant and ASTM E-84 Class C rated for flame spread and smoke developed for interior wall and ceiling finishes a superior level of safety and protection compared to traditional HVAC/R secondary drain pan materials. 021449962087
Quantity: 10, Interleaved: 10021449961261, Dimensions (in): 14" x 9" x 5″, Cubic Feet: 0.36 Redesigned Probe Sensor for Increased Reliability, 6 Feet of Both Plenum Rated Probe & Sensor Wire, 5 Amp, 24 Volts AC Solid State Sensor with Water Detection LED Light, Compact Waterproof Design, Switch Can Be Normally Open or Normally Closed, Normally Open 4th Wire for Optional External Alarm, Digital Controller or Energy Management Systems, Patent Pending Smart Sensor Technology with Time Delay, US Patents and Patents Pending, Bonus Secondary Sensor with Water Detection LED Light Two Sensors for the Price of One, UL 508 Approved 021449961264
Quantity: 50, Interleaved: 10021449961827, Dimensions (in): 16 x 9 x 5, Cubic Feet: 0.42 An alternative plenum rated primary pan probe for the AquaGuard AG-3150E and AG-3175E., It can be substituted for the secondary drain pan probe sensor on AguaGuard AG-3150E and plenum rated AG-3175E Condensate Management Systems that are normally installed in the auxiliary drain port., Included in AquaGuard AG-3575E Complete Condensate Management System., The slim micro probe features an adhesive pad as well as two adjustable mounting clips to attach it to the side of the primary drain pan., Can detect as little as 1/16 inch of condensate water when installed., For quick and easy installation, the plenum rated AG-3176 features a patented waterproof molded shur plug connector. 021449961820
Quantity: 10, Interleaved: 10021449961438, Dimensions (in): 24 x 9 x 3, Cubic Feet: 0.38 AG-4200 Condensate Management System, Included with Goliath Series Secondary Drain Pans and Goliath Value Series Secondary Drain Pans, Electronic Multipurpose Water Sensor or Magnetic Condensate Overflow Switch, 3/4 inch PVC threaded male pipe adapter and rubber gasket, 14 AG-GFR Vibration Isolators 021449961431
Size: 34” x 79” x 7.50”, Quantity: 10, Outer Dimension (L x W X D): 79.0" x 33.75" x 7.50", Inside (Drip Area) Dimension (L x W X D): 73.5" x 26.5" x 2.1" Specifically designed for the unique clearance needs of furnace installations and piping requirements., With 7 of clearance, Goliath Furnace pans offer the necessary clearances for any piping that needs to run below a furnace unit especially with condensing furnace installations., Provide extreme temperature durability -20 F (-28 C) to 260 F (126.7 C), high tensile strength, crack/split/leak/rust resistance, and are self extinguishing. 021449962247
Size: 30” x 36” x 3.00”, Quantity: 10, Outer Dimension (L x W X D): 37.5" x 30.5" x 3.00", Inside (Drip Area) Dimension (L x W X D): 30.75" x 23.0" x 2.375" Specifically designed for the unique clearance needs of furnace installations and piping requirements., With 7 of clearance, Goliath Furnace pans offer the necessary clearances for any piping that needs to run below a furnace unit especially with condensing furnace installations., Provide extreme temperature durability -20 F (-28 C) to 260 F (126.7 C), high tensile strength, crack/split/leak/rust resistance, and are self extinguishing. 021449962209
Quantity: 10, Interleaved: 10021449961247, Dimensions (in): 14 x 9 x 5, Cubic Feet: 0.36 021449961240
Product Image Not AvailableMIGHTY BRACKET FOR MINI SPLITS 97705
Locke Part #: L6699MFG Part #: 97705 Compare
Model: MV4, Size: 9 lbs, Carton Qty: 4, Quantity: 4, Carton Weight: 9, Duct Sizes: 6″,7″,8″, Max Ceiling Thickness: 9.25″, Strap Included: Y, Integral Damper: Y, Required Hole Diameter: 9.25″, AK Factor: 0.3 Model MV ceiling diffuser with 4 way grille, Model MV ceiling diffuser line is a snap to install in any ceiling, Quick tear off bands allow for easy size changes and swinging clips will fasten the assembly into the ceiling in seconds!, Made from high impact polymers and featuring a virtually airtight damper for winter shut off and/or volume control makes them a great fit in any application.
Model: MV360, Size: 9 lbs, Carton Qty: 4, Quantity: 4, Carton Weight: 9, Duct Sizes: 6″,7″,8″, Max Ceiling Thickness: 9.25″, Strap Included: Y, Integral Damper: Y, Required Hole Diameter: 9.25″, AK Factor: 0.33 Model MV ceiling diffuser with round grille, Our Model MV ceiling diffuser line is a snap to install in any ceiling, Quick tear off bands allow for easy size changes and our swinging clips will fasten the assembly into the ceiling in seconds!, Made from high impact polymers and featuring a virtually airtight damper for winter shut off and/or volume control
Size: with PVC adapter, Quantity: 12, Interleaved: 10021449974056, Dimensions (in): 13 x 10 x 6, Cubic Feet: 0.45 The Micro Size Magic Vent AAV has a 1 1/2 inch female threaded connection; however the valve is rated for 1 1/4 inch to 2 inch individual or branch vent pipes., Eliminates roof penetrations, When used in combination with the Magic Trap fitting, it is the quickest way to install a venting system, Great design flexibility, Permitted for use in accordance with: IPC 2012, Sec 917; IRC 2012; Manufactured Housing Construction and Safety Standard 2001, When used in combination with the Magic Trap fitting, it is the quickest way to install a venting system., Magic Vent Micro is also available with ABS or PVC adapter for easy installation in a wall cavity., U.S. Patent No. D427, 286. 021449974059
19068.jpg3/8" x 6" Metal Acid Dope Brush
Locke Part #: M0094MFG Part #: 19068 Compare
Size: 3/8" x 6", Quantity: 144, Interleaved: 10021449190685, Dimensions (in): 7 x 5 x 5, Cubic Feet: 0.10 021449190688
74025.jpg12 Ounce Soft Soldering C-Flux
Locke Part #: M0763MFG Part #: 74025 Compare
Size: 12 oz, Quantity: 24, Flash Point: >230˚F (110˚C) SETA CC, Interleaved: 10021449740255, Dimensions (in): 11-3/4 x 8-7/8 x 8-1/8, Cubic Feet: 0.56, Solubility In Water: Insoluble, Specific Gravity (H20 = 1): 1.59, Appearance/Odor: Gray Paste / No Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 13.2 +- .5 lbs/gal., Shelf Life: 1 year minimum Lead free,, soft soldering paste-type flux, Contains a blend of flux and powdered solder (95/5 tin/antimony), Blend of 95/5 tin/antimony, Cleans, fluxes and pretins in one operation saving time and money, Multipurpose for use with 95/5, 60/40, 50/50, and 40/60 solder 021449740258
74025.jpg3 Ounce Soft Soldering C-Flux
Locke Part #: M0764MFG Part #: 74026 Compare
Size: 3 oz, Quantity: 48, Flash Point: >230˚F (110˚C) SETA CC, Interleaved: 10021449740262, Dimensions (in): 9 x 8 x 9, Cubic Feet: 0.38, Solubility In Water: Insoluble, Specific Gravity (H20 = 1): 1.59, Appearance/Odor: Gray Paste / No Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 13.2 +- .5 lbs/gal., Shelf Life: 1 year minimum Lead free,, soft soldering paste-type flux, Contains a blend of flux and powdered solder (95/5 tin/antimony), Blend of 95/5 tin/antimony, Cleans, fluxes and pretins in one operation saving time and money, Multipurpose for use with 95/5, 60/40, 50/50, and 40/60 solder 021449740265
Size: 1/2 pint brush top (237 ml), Quantity: 24, Flash Point: >150˚F (65˚C) SETA CC, Vapor Pressure (mm Hg): 0.3 @ 68˚F (20˚C), Interleaved: 10021449255513, Dimensions (in): 11-1/4 x 8-1/2 x 8, Cubic Feet: 0.76, Boiling Point: 322˚F (161˚C) @ 760mm Hg, Solubility In Water: 23%, Specific Gravity (H20 = 1): 1.38, Appearance/Odor: Yellow Paste/Mild Odor, VOC Content (Theoretical % By Weight): 23% or (317 g/L), Wt/Gal @ 77 degree F: 10.8 +- .5 lbs/gal., Shelf Life: 2 years, Vapor Density (AIR = 1): 1.1, Evaporation Rate (Ethyl Acetate = 1): 0.14 A soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings, Can be pressurized immediately for piping up through 2 and 100 psi(for natural gas, air and water only), Lead free, and contains no other metals, Lubricates and protects threads, 2 year shelf life, Certified to NSF/ANSI 61-G, Ideal for application with a wide variety of fluids and gases, including potable water applications, Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe, Not recommended for use with ABS pipe or Oxygen. 021449255516
Size: 1/4 pint brush top (118 ml), Quantity: 24, Flash Point: >150˚F (65˚C) SETA CC, Vapor Pressure (mm Hg): 0.3 @ 68˚F (20˚C), Interleaved: 10021449256312, Dimensions (in): 8 x 8 x 10, Cubic Feet: 0.50, Boiling Point: 322˚F (161˚C) @ 760mm Hg, Solubility In Water: 23%, Specific Gravity (H20 = 1): 1.38, Appearance/Odor: Yellow Paste/Mild Odor, VOC Content (Theoretical % By Weight): 23% or (317 g/L), Wt/Gal @ 77 degree F: 10.8 +- .5 lbs/gal., Shelf Life: 2 years, Vapor Density (AIR = 1): 1.1, Evaporation Rate (Ethyl Acetate = 1): 0.14 A soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings, Can be pressurized immediately for piping up through 2 and 100 psi(for natural gas, air and water only), Lead free, and contains no other metals, Lubricates and protects threads, 2 year shelf life, Certified to NSF/ANSI 61-G, Ideal for application with a wide variety of fluids and gases, including potable water applications, Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe, Not recommended for use with ABS pipe or Oxygen. 021449256315
Size: Pint brush top (473 ml), Quantity: 12, Flash Point: >150˚F (65˚C) SETA CC, Vapor Pressure (mm Hg): 0.3 @ 68˚F (20˚C), Interleaved: 10021449254318, Dimensions (in): 13-3/4 x 10-1/2 x 5-1/4, Cubic Feet: 0.53, Boiling Point: 322˚F (161˚C) @ 760mm Hg, Solubility In Water: 23%, Specific Gravity (H20 = 1): 1.38, Appearance/Odor: Yellow Paste/Mild Odor, VOC Content (Theoretical % By Weight): 23% or (317 g/L), Wt/Gal @ 77 degree F: 10.8 +- .5 lbs/gal., Shelf Life: 2 years, Vapor Density (AIR = 1): 1.1, Evaporation Rate (Ethyl Acetate = 1): 0.14 A soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings, Can be pressurized immediately for piping up through 2 and 100 psi(for natural gas, air and water only), Lead free, and contains no other metals, Lubricates and protects threads, 2 year shelf life, Certified to NSF/ANSI 61-G, Ideal for application with a wide variety of fluids and gases, including potable water applications, Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe, Not recommended for use with ABS pipe or Oxygen. 021449254311
Size: 10.3 oz Cartridge, Application: Caulking Gun or Trowel, Quantity: 12, Vapor Pressure (mm Hg): 17 @ 68˚F (20˚C), Interleaved: 10021449666166, Dimensions (in): 8 x 6 x 12, Cubic Feet: 0.34, Boiling Point: 212˚F (100˚C) @ 760mm Hg, Density: 10.5 +/- 0.5 lbs./gal. 1.25 g/cc, Solubility In Water: Soluble, Specific Gravity (H20 = 1): 1.25, Appearance/Odor: Red Paste/Mild Odor, VOC Content (Theoretical % By Weight): <1% or <10 g/L, Evaporation Rate (Ethyl Acetate = 1): >1, Expansion Begins: 375˚ F (190˚C), Expansion Greatest: 575˚ (302˚) to 1100˚ F(593˚ C), Fully Cured Time: 3 to 4 weeks (at 77˚F/ 25˚C), Elastomeric: Yes, Freeze-Thaw: Excellent, Skin Over Time: 30 min. (at 77˚ F/ 25˚C), PH Value: 6.5 to 7 A one-component, general purpose fire-rated sealant and smoke seal for construction joints and through penetrations., An intumescent, water-based, non-sag caulking grade sealant, Water Based, Paintable, VOC Compliant, Easy to apply and great for retrofits, Minimum 3 Year Shelf Life, Protected against mold growth, Sound Transmission Class (STC) rating 53, Tested in a UL 411 wall assembly/section to ASTM E90, Suitable for dynamic movement 021449666169
Size: 4 oz, Quantity: 12, Flash Point: >148˚F (64˚C) SETA CC, Vapor Pressure (mm Hg): <5 @ 68˚F (20˚C), Interleaved: 10021449450048, Dimensions (in): 10 x 8 x 5, Cubic Feet: 0.23, Boiling Point: 320˚F (160˚C) @ 760mm Hg, Solubility In Water: Insoluble, Specific Gravity (H20 = 1): 0.9, Appearance/Odor: Pale Yellow Oil/Petroleum Odor, VOC Content (Theoretical % By Weight): <10 g/L per SCAQMD Test Method 316A, Wt/Gal @ 77 degree F: 7.5 +- .2 lbs./gal., Shelf Life: 2 years, Subject to Inspection, Vapor Density (AIR = 1): >5, Evaporation Rate (Ethyl Acetate = 1): <1 021449450041
Size: 16 oz aerosol, Quantity: 12, Interleaved: 10021449866252, Dimensions (in): 9 x 12 x 10, Cubic Feet: 0.63, Boiling Point: >165˚F 74˚C) @ 760mm Hg, Solubility In Water: Slightly, Specific Gravity (H20 = 1): 1.00, Appearance/Odor: Gray Liquid / Petroleum Odor, VOC Content (Theoretical % By Weight): 64.5% or (645 g/L), Vapor Density (AIR = 1): <1, Evaporation Rate (Ethyl Acetate = 1): >1, Aerosol Flame Extension: Positive, NFPA Aerosol Level: 3 Fights rust and corrosion with galvanic action like that of hot-dip galvanizing., Economical and easily applied., Recommended for marine, mining, petrochemical, off-shore structures, and HVAC installations., 95% pure zinc, ideal for fabricated metal, is methylene chloride free, Meets MIL-P-46105, MIL-P-26433, MIL-P-21035, and MIL-P-26915A. 021449866255
Size: 4 fl. oz. (118 ml), Quantity: 12, Flash Point: >148˚F (64˚C) SETA CC, Vapor Pressure (mm Hg): <5 @ 68˚F (20˚C), Interleaved: 10021449450093, Dimensions (in): 10 x 8 x 5, Cubic Feet: 0.23, Boiling Point: 320˚F (160˚C) @ 760mm Hg, Solubility In Water: Insoluble, Specific Gravity (H20 = 1): 0.9, Appearance/Odor: Pale Yellow Oil/Petroleum Odor, VOC Content (Theoretical % By Weight): <10 g/L per SCAQMD Test Method 316A, Wt/Gal @ 77 degree F: 8.2 + .2 lbs./gal., Shelf Life: Minimum 2 years in sealed container, subject to reinspection thereafter, Vapor Density (AIR = 1): >5, Evaporation Rate (Ethyl Acetate = 1): <1 021449450096
45006.jpgAcid Test Kit for A/C and Refrigeration Oils
Locke Part #: M1384MFG Part #: 45006 Compare
Size: Kit, Case Qty: 12 boxes, Quantity: 12, Flash Point: >52˚F (11˚C) SETA CC, Vapor Pressure (mm Hg): <5 @ 68˚F (20˚C), Interleaved: 10021449450062, Dimensions (in): 9 x 6 x 6, Cubic Feet: 0.19, Boiling Point: 147˚F (64˚C) @ 760mm Hg, Solubility In Water: Soluble, Specific Gravity (H20 = 1): 0.79, Appearance/Odor: Clear Liquid/Sharp Odor, VOC Content (Theoretical % By Weight): 99% or (990 g/L), Vapor Density (AIR = 1): >1, Evaporation Rate (Ethyl Acetate = 1): 2.5, Approx Lbs Per Case: 3.0, Approx Cu Ft Per Case: 0 .22, Lower Explosion Limit: 6%, Upper Explosion Limit: 36.5% Acid-Detector for POE Oils is a test kit designed for use in the field to detect acid in Polyol Ester (POE) air-conditioning and refrigeration oils., Quickly and accurately detects unacceptable amounts of acids in Polyol Ester type refrigeration oils., Easy to use and quickly detects acid without having to wait days or weeks for a laboratory analysis., Acid-Detector for POE Oils may be used with all Polyol Ester type refrigerant oils.Designed to provide quick and accurate oil analysis while in the field., May be used on all systems both refrigeration and air conditioning. 021449450065
Size: 1/2 pint brush top (237 ml), Quantity: 24, Flash Point: 144˚F, Vapor Pressure (mm Hg): 0.3 @ 68˚F (20˚C), Interleaved: 10021449315514, Dimensions (in): 16 x 12 x 5, Cubic Feet: 0.56, Boiling Point: 322˚F (161˚C) @ 760mm Hg, Solubility In Water: 23%, Specific Gravity (H20 = 1): 1.38, Appearance/Odor: Blue Paste/Mild Odor, VOC Content (Theoretical % By Weight): 23% or (230 g/L), Wt/Gal @ 77 degree F: 10.8 +- .5 lbs/gal., Shelf Life: 2 years minimum, Vapor Density (AIR = 1): 1.1, Evaporation Rate (Ethyl Acetate = 1): 0.14 Pip Thread sealant with PTFE is a fast-dry, flexible set thread sealant designed for high vibration environments such as refrigeration and industrial applications., PTFE has been added to enhance thread lubrication during assembly and break out., For use with water (hot or cold), Lead free and contains no metal, Brushable from 20 degree F to 140 degree F, Excellent as a gasket adhesive on flanges, Low odor, non-separating, Lubricates and protects threads, Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC., Great for use as a positive lock and seal on threaded fasteners., Certified to NSF/ANSI 61-G 021449315517
Size: 8 oz (Tool Box), Quantity: 24, Flash Point: >399˚F, Vapor Pressure (mm Hg): < 0.01 @ 68˚F (20˚C), Melting Point: 120-150˚F (52-66˚C), Interleaved: 10052541140209, Dimensions (in): 11-3/4 x 8-7/8 x 8-1/8, Cubic Feet: 0.63, Solubility In Water: Insoluble, Specific Gravity (H20 = 1): 1.06, Appearance/Odor: Tan / Petroleum Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 8.44 +- .5 lbs/gal., Shelf Life: 2 year minimum Lead Free, will not freeze or decompose, No odor, Safe for potable water systems, Recommended for use on all solder alloys including 95/5 and all lead free solders., Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2., Certified to NSF/ANSI Standard 61, Annex G. 052541140202
Size: 4 oz, Quantity: 24, Flash Point: >400˚F (204˚C) SETA CC, Vapor Pressure (mm Hg): < 0.01 @ 68˚F (20˚C), Melting Point: 120-150˚F (52-66˚C), Interleaved: 10021449740477, Dimensions (in): 12 x 10 x 7, Cubic Feet: 0.49, Solubility In Water: Insoluble, Specific Gravity (H20 = 1): 0.98, Appearance/Odor: Tan / Petroleum Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 8.18 +- .5 lbs/gal., Shelf Life: 2 year minimum, subject to inspection Lead free joints, Creamy, smooth paste, Safe for potable water systems, Certified to NSF/ANSI 61-G, Meets ASTM B-813 specs, Complies with AB 1953 requirements, Meets the ASTM B-813 standard requiring that flux residue shall be water flushable after soldering, Superior, wetting ability; Allows solder to flow easily and uniformly into joints, Solid wire solders 95/5, 60/40, 50/50 and 40/60, For use with the silicon family of metal alloy products 021449740470
Size: 16 oz, Quantity: 12, Flash Point: >400˚F (204˚C) SETA CC, Vapor Pressure (mm Hg): < 0.01 @ 68˚F (20˚C), Melting Point: 120-150˚F (52-66˚C), Interleaved: 10021449740460, Dimensions (in): 14-5/8 x 10-15/16 x 4-1/2, Cubic Feet: 0.48, Solubility In Water: Insoluble, Specific Gravity (H20 = 1): 0.98, Appearance/Odor: Tan / Petroleum Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 8.18 +- .5 lbs/gal., Shelf Life: 2 year minimum, subject to inspection Lead free joints, Creamy, smooth paste, Safe for potable water systems, Certified to NSF/ANSI 61-G, Meets ASTM B-813 specs, Complies with AB 1953 requirements, Meets the ASTM B-813 standard requiring that flux residue shall be water flushable after soldering, Superior, wetting ability; Allows solder to flow easily and uniformly into joints, Solid wire solders 95/5, 60/40, 50/50 and 40/60, For use with the silicon family of metal alloy products 021449740463
Size: 1/4 pint brush top (118 ml), Quantity: 24, Flash Point: >300˚F (149˚C) SETA CC, Vapor Pressure (mm Hg): < 1 @ 77˚F (25˚C), Interleaved: 10021449236314, Dimensions (in): 14 x 7 x 4, Cubic Feet: 0.23, Solubility In Water: Negligible, Specific Gravity (H20 = 1): 1.32, Appearance/Odor: White Paste/Slight Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 11.0 +- .5 lbs/gal., Shelf Life: 2 years minimum, Federal Specification: TT-S-1732, Non-volatiles: 100% RectorSeal T Plus 2 pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal., Lead free, 2 year shelf life, Formulated for plastic and metal pipe, Non-flammable, For pressures up to 10,000 psi (liquids) and 2,000 psi (gases), Certified to NSF/ANSI 61-G, Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe., Can be pressurized immediately following application 021449236317
Size: 1/2 pint brush top (237 ml), Quantity: 24, Flash Point: >300˚F (149˚C) SETA CC, Vapor Pressure (mm Hg): < 1 @ 77˚F (25˚C), Interleaved: 10021449235515, Dimensions (in): 11-1/4 x 8-1/2 x 8, Cubic Feet: 0.76, Solubility In Water: Negligible, Specific Gravity (H20 = 1): 1.32, Appearance/Odor: White Paste/Slight Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 11.0 +- .5 lbs/gal., Shelf Life: 2 years minimum, Federal Specification: TT-S-1732, Non-volatiles: 100% RectorSeal T Plus 2 pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal., Lead free, 2 year shelf life, Formulated for plastic and metal pipe, Non-flammable, For pressures up to 10,000 psi (liquids) and 2,000 psi (gases), Certified to NSF/ANSI 61-G, Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe., Can be pressurized immediately following application 021449235518
Size: Pint brush top (473 ml), Quantity: 12, Flash Point: >300˚F (149˚C) SETA CC, Vapor Pressure (mm Hg): < 1 @ 77˚F (25˚C), Interleaved: 10021449234310, Dimensions (in): 13-1/2 x 10 x 4-1/2, Cubic Feet: 0.53, Solubility In Water: Negligible, Specific Gravity (H20 = 1): 1.32, Appearance/Odor: White Paste/Slight Odor, VOC Content (Theoretical % By Weight): 0% or (0 g/L), Wt/Gal @ 77 degree F: 11.0 +- .5 lbs/gal., Shelf Life: 2 years minimum, Federal Specification: TT-S-1732, Non-volatiles: 100% RectorSeal T Plus 2 pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal., Lead free, 2 year shelf life, Formulated for plastic and metal pipe, Non-flammable, For pressures up to 10,000 psi (liquids) and 2,000 psi (gases), Certified to NSF/ANSI 61-G, Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe., Can be pressurized immediately following application 021449234313
68342.jpgSootspray Aerosol Soot Remover, 14oz
Locke Part #: M1847MFG Part #: 68342 Compare
Size: 14oz aerosol, Case Qty: 12, Quantity: 12, Flash Point: 52˚F (11˚C) SETA CC, Interleaved: 10687598032001, Dimensions (in): 11 x 9 x 9, Cubic Feet: 0.52, Boiling Point: >212˚F (100˚C) @ 760mm Hg, Solubility In Water: Soluble, Specific Gravity (H20 = 1): 1.12, Appearance/Odor: Clear Liquid / Mild Odor, VOC Content (Theoretical % By Weight): 14% or (157 g/L), Vapor Density (AIR = 1): <1, Evaporation Rate (Ethyl Acetate = 1): >1, Approx Lbs Per Case: 14, Approx Cu Ft Per Case: 0.447, Lower Explosion Limit: 2.5, Upper Explosion Limit: 12 The original aerosol soot remover, The original soot remover aerosol, It reaches where vacuum cleaners can t, Cuts vacuum time by 50-100%, Contains no lead, Non flammable, Non explosive, Catalytically active for safest possible soot removal, Environmentally Friendly, Approved for Connecticut sale 687598032004
Size: 1.2 lbs., Quantity: 12/case, Interleaved: 10021449687086, Boiling Point: 214˚F (101˚C) @ 760mm Hg, Solubility In Water: Soluble, Specific Gravity (H20 = 1): 2.126, Appearance/Odor: White solid / None, VOC Content (Theoretical % By Weight): 0% or (0 g/L) Cleans heater coils thoroughly, Restores pressure and circulation in minutes, with no strong odor, A unique, economical, biodegradable cleaner containing a combination of organic, inorganic and corrosion inhibiting ingredients., It is easy to use and works twice as fast as other cleaners,, More effective than vinegar, Biodegradable, Use it for routine cleaning to remove calcium and other solid deposits from heating coils. 02144968708
940.jpgSure Shot 1/4" SAE Reusable Hose
Locke Part #: M2865MFG Part #: 940 Compare
Connection: 1/4" SAE
M2870.jpg1.5 oz. Leak freeze With Adapter
Locke Part #: M2870MFG Part #: 45312 Compare
Permanently seals leaks, Will continue to seal additional leaks for up to 1 year that meet testing specifications, Ideal for leak protection, Does not contain polymers, Not activated by moisture or oxygen, Tested to be non-clogging to a/c compressor and recovery unit
Permanently seals leaks, Will continue to seal additional leaks for up to 1 year that meet testing, Does not contain polymers, Not activated by moisture or oxygen, Tested to be non-clogging to a/c compressor and recovery unit, Ideal for preventive maintenance, Special Features Of Magic Frost Performance Enhancer, Extends compressor life and reduces noise, Lubricates and reduces friction, Cleans and revitalizes the a/c system, Reduces energy consumption, Enhances performance in older systems
M2870.jpg1.5 oz. Leak freeze Without Adapter
Locke Part #: M2872MFG Part #: 45311 Compare
Permanently seals leaks, Will continue to seal additional leaks for up to 1 year that meet testing specifications, Ideal for leak protection, Does not contain polymers, Not activated by moisture or oxygen, Tested to be non-clogging to a/c compressor and recovery unit
Permanently seals leaks, Will continue to seal additional leaks for up to 1 year that meet testing, Does not contain polymers, Not activated by moisture or oxygen, Tested to be non-clogging to a/c compressor and recovery unit, Ideal for preventive maintenance, Special Features Of Magic Frost Performance Enhancer, Extends compressor life and reduces noise, Lubricates and reduces friction, Cleans and revitalizes the a/c system, Reduces energy consumption, Enhances performance in older systems
M4710.jpg1/4 Pt. Blue+ Thread Sealant with PTFE
Locke Part #: M4710MFG Part #: 31633 Compare
Color: Blue, Size: 1/4 Pint Brush Top, Dimensions: 14" x 7" x 4", Specific Gravity (H2O = 1): 1.32, Vapor Pressure (mm Hg): < 1 @ 77 F (25 C), Cubic Feet: .23, Appearance/Odor: Blue Paste/Slight Odor, Shelf Life: 2 Years Minimum, Federal Specification: TT-S-1732, Non-volatiles: 100%, Flash point: >300 F (149 C) SETA CC, Flash Point SETA CC: Greater than 300°F, Quantity/Case: 24 Cans, Wt/Gal @ 77º F: 11.0 ± .5 lbs/gal. 021449316330
M4710.jpg1/2 Pt. Blue+ Thread Sealant with PTFE
Locke Part #: M4711MFG Part #: 31553 Compare
Color: Blue, Size: 1/2 Pint Brush Top, Dimensions: 11-1/4" x 8-1/2" x 8", Specific Gravity (H2O = 1): 1.32, Vapor Pressure (mm Hg): < 1 @ 77 F (25 C), Cubic Feet: .76, Appearance/Odor: Blue Paste/Slight Odor, Shelf Life: 2 Years Minimum, Federal Specification: TT-S-1732, Non-volatiles: 100%, Flash point: >300 F (149 C) SETA CC, Flash Point SETA CC: Greater than 300°F, Quantity/Case: 24 Cans, Wt/Gal @ 77º F: 11.0 ± .5 lbs/gal. 021449315531
M4710.jpg1 Pt. Blue+ Thread Sealant with PTFE
Locke Part #: M4712MFG Part #: 31433 Compare
Color: Blue, Size: 1 Pint Brush Top, Dimensions: 13-1/2" x 10" x 4-1/2", Specific Gravity (H2O = 1): 1.32, Vapor Pressure (mm Hg): < 1 @ 77 F (25 C), Cubic Feet: .53, Appearance/Odor: Blue Paste/Slight Odor, Shelf Life: 2 Years Minimum, Federal Specification: TT-S-1732, Non-volatiles: 100%, Flash point: >300 F (149 C) SETA CC, Flash Point SETA CC: Greater than 300°F, Quantity/Case: 12 Cans, Wt/Gal @ 77º F: 11.0 ± .5 lbs/gal. 021449314336
M4710.jpg1 Qt. Blue+ Thread Sealant with PTFE
Locke Part #: M4713MFG Part #: 31303 Compare
Color: Blue, Size: 1 Quart Brush Top, Dimensions: 18" x 13" x 6", Specific Gravity (H2O = 1): 1.32, Vapor Pressure (mm Hg): < 1 @ 77 F (25 C), Cubic Feet: .81, Appearance/Odor: Blue Paste/Slight Odor, Shelf Life: 2 Years Minimum, Federal Specification: TT-S-1732, Non-volatiles: 100%, Flash point: >300 F (149 C) SETA CC, Flash Point SETA CC: Greater than 300°F, Quantity/Case: 12 Cans, Wt/Gal @ 77º F: 11.0 ± .5 lbs/gal. 021449313032
Size: 3" PVC, Quantity: 23, Interleaved: 10021449974834, Dimensions (in): 9 x 11 x 8, Cubic Feet: 0.4 Threaded cleanout adapter fitting that cements inside pipe providing a flush-finished cleanout for drain, waste, and vent systems, It reduces installation cost, simplifies rough-in and is available in PVC or ABS, Tom-Kap is available as an adapter and plug unit in 2 , 3 , and 4 sizes and is recommended for use on schedule 40, SDR-35 and foam core., Reduces installation cost, Simplifies rough-in 021449974837
Size: 4" PVC, Quantity: 24, Interleaved: 10021449974858, Dimensions (in): 10x10x14, Cubic Feet: .73 Threaded cleanout adapter fitting that cements inside pipe providing a flush-finished cleanout for drain, waste, and vent systems, It reduces installation cost, simplifies rough-in and is available in PVC or ABS, Tom-Kap is available as an adapter and plug unit in 2 , 3 , and 4 sizes and is recommended for use on schedule 40, SDR-35 and foam core., Reduces installation cost, Simplifies rough-in 021449974851
Size: 2" PVC, Quantity: 24, Interleaved: 10021449974810, Dimensions (in): 7 x 8 x 6, Cubic Feet: 0.17 Threaded cleanout adapter fitting that cements inside pipe providing a flush-finished cleanout for drain, waste, and vent systems, It reduces installation cost, simplifies rough-in and is available in PVC or ABS, Tom-Kap is available as an adapter and plug unit in 2 , 3 , and 4 sizes and is recommended for use on schedule 40, SDR-35 and foam core., Reduces installation cost, Simplifies rough-in 021449974813
Packaging: 6, Dimension: 11.25 x 8.75 x 6, Interleaved: 10021449970416, Cubic Feet: 0.34, Size‎: 2" Trap Seal Simple one-piece installation, Use on all brands of drains, Economical, Specifications:, SureSeal Model SS3509V 3.5 Inline Floor Drain Trap Seal, Commercial grade UV and Ozone resistant ABS plastic housing with proprietary EPDM rubber diaphragm and soft rubber sealing gasket, Floor rating ASSE 1072 AF-GW, Applications:, The SureSeal should be utilized where a trap primer has failed or where a trap primer does not exist., New Construction: Used in floor drains to provide added protection against escaping sewer gases. Eliminates the need to repair/replace trap primers when they fail., Retrofit: Used in situations where trap primers have failed or where trap primers were never installed., The SureSeal floor drain trap sealer can be used with all 2 , 3 , and 4 floor drains and in 3 & 4 floor drain strainers., Applications include 021449970419
Packaging: 6, Dimension: 11.25 x 8.75 x 6, Interleaved: 10021449970423, Cubic Feet: 0.34, Size‎: 3" Trap Seal Simple one-piece installation, Use on all brands of drains, Economical, Specifications:, SureSeal Model SS3509V 3.5 Inline Floor Drain Trap Seal, Commercial grade UV and Ozone resistant ABS plastic housing with proprietary EPDM rubber diaphragm and soft rubber sealing gasket, Floor rating ASSE 1072 AF-GW, Applications:, The SureSeal should be utilized where a trap primer has failed or where a trap primer does not exist., New Construction: Used in floor drains to provide added protection against escaping sewer gases. Eliminates the need to repair/replace trap primers when they fail., Retrofit: Used in situations where trap primers have failed or where trap primers were never installed., The SureSeal floor drain trap sealer can be used with all 2 , 3 , and 4 floor drains and in 3 & 4 floor drain strainers., Applications include 021449970426
R1107.jpg3-1/2" SureSeal Inline Floor Drain Trap Seal 
Locke Part #: R1107MFG Part #: 97043 Compare
Size: 3-1/2", Dimensions: 11.25" x 8.75" x 6", Packaging: 6 Simple one-piece installation, Use on all brands of drains, Economical, Specifications:, SureSeal Model SS3509V 3.5 Inline Floor Drain Trap Seal, Commercial grade UV and Ozone resistant ABS plastic housing with proprietary EPDM rubber diaphragm and soft rubber sealing gasket, Floor rating ASSE 1072 AF-GW, Applications:, The SureSeal should be utilized where a trap primer has failed or where a trap primer does not exist., New Construction: Used in floor drains to provide added protection against escaping sewer gases. Eliminates the need to repair/replace trap primers when they fail., Retrofit: Used in situations where trap primers have failed or where trap primers were never installed., The SureSeal floor drain trap sealer can be used with all 2 , 3 , and 4 floor drains and in 3 & 4 floor drain strainers., Applications include 021449970433
Size: 3" PVC, Quantity: 6, Interleaved: 10021449969236 Prevents sewage backup into a residence or commercial building as a result of a plugged sewer system, excess volume in the system or groundwater flooding, Designed to be installed easily outside a home, business or other structure, without using a costly manhole, and are readily accessible for maintenance or cleaning., The extendable valves consist of a tee-shaped valve body, a top collar and a bottom collar with a replaceable PVC flapper attached. In the event of back-pressure, the flapper blocks the reverse flow and prevents a sewage backup, No manhole required, Installs up to 12 ft. below ground level, Verticle offset from upstream to downstream side is: 3 in. & 4 in. valves 0.4 in., 6 in. valve 0.5 in., Clean Check valves are available in ABS and PVC and in multiple sizes, to meet the needs of most residential and commercial construction, New heavy duty flapper that withstands pressure of 75 psi at 100 ft. of head. 021449969239
Size: 4" PVC, Quantity: 6, Interleaved: 10021449969243 Prevents sewage backup into a residence or commercial building as a result of a plugged sewer system, excess volume in the system or groundwater flooding, Designed to be installed easily outside a home, business or other structure, without using a costly manhole, and are readily accessible for maintenance or cleaning., The extendable valves consist of a tee-shaped valve body, a top collar and a bottom collar with a replaceable PVC flapper attached. In the event of back-pressure, the flapper blocks the reverse flow and prevents a sewage backup, No manhole required, Installs up to 12 ft. below ground level, Verticle offset from upstream to downstream side is: 3 in. & 4 in. valves 0.4 in., 6 in. valve 0.5 in., Clean Check valves are available in ABS and PVC and in multiple sizes, to meet the needs of most residential and commercial construction, New heavy duty flapper that withstands pressure of 75 psi at 100 ft. of head. 021449969246
Size: 6" PVC, Quantity: 3, Interleaved: 10021449969267 Prevents sewage backup into a residence or commercial building as a result of a plugged sewer system, excess volume in the system or groundwater flooding, Designed to be installed easily outside a home, business or other structure, without using a costly manhole, and are readily accessible for maintenance or cleaning., The extendable valves consist of a tee-shaped valve body, a top collar and a bottom collar with a replaceable PVC flapper attached. In the event of back-pressure, the flapper blocks the reverse flow and prevents a sewage backup, No manhole required, Installs up to 12 ft. below ground level, Verticle offset from upstream to downstream side is: 3 in. & 4 in. valves 0.4 in., 6 in. valve 0.5 in., Clean Check valves are available in ABS and PVC and in multiple sizes, to meet the needs of most residential and commercial construction, New heavy duty flapper that withstands pressure of 75 psi at 100 ft. of head. 021449969260
98040.jpg1-1/2" Golden Pipe Shredder
Locke Part #: T2447MFG Part #: 98040 Compare
Size: 1- 1/2", Quantity: 4, Interleaved: 10021449980408, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges 021449980401
98040.jpg2" Golden Pipe Shredder
Locke Part #: T2448MFG Part #: 98041 Compare
Size: 2", Quantity: 4, Interleaved: 10021449980415, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges 021449980418
98040.jpg3" Golden Pipe Shredder
Locke Part #: T2449MFG Part #: 98042 Compare
Size: 3", Quantity: 4, Interleaved: 10021449980422, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges 021449980425
98040.jpg4" Golden Pipe Shredder
Locke Part #: T2450MFG Part #: 98043 Compare
Size: 4", Quantity: 4, Interleaved: 10021449980439, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges 021449980432
97258.jpgGolden Extractor Tub Drain Tool
Locke Part #: T2468MFG Part #: 97258 Compare
Quantity: 3, Interleaved: 10021449972588, Dimensions (in): 10-1/4 x 5-1/4 x 6, Cubic Feet: 0.22 A unique tool that simplifies the removal of old tub drains even when cross arms are broken out or missing., Patented design utilizes a standard 3/8 drive ratchet to either extract or install tub drains quickly and easily., Use to install new tub drains, Built in bolt/screw remover, Universal size, Patent # 7,024,972., Patent # 7,024,972., Made of heat tempered steel, For extracting tub drains, Removes bolts/screws where the heads are broken off or just won t move 021449972581
Model: NGR22SDT, Carton Qty: 20, Carton Weight: 3 Novent Screwdriver tool for R22 and Universal Caps, With a swiveling tipthe, Great to get into tough to reach places
Model: NPR410SDT, Carton Qty: 20, Carton Weight: 3 Novent Screwdriver tool for R410 and R410 Euro Caps, With a swiveling tip, Great to get into tough to reach places