|
|
The only wrench capable of tightening the compression nut at the floor on a dishwasher. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flares, sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" |
|
|
|
Flares, sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Drop head dies. Head locks in or releases by pull of ratchet knob. Separate sets of alloy steel chaser dies, quickly removed or reversed for close-to-wall threads. Ratchet and handle complete. |
|
|
|
|
|
|
|
|
|
|
Weight: 6 Lb., Nominal Size: 24", Pipe Capacity: 3", Std Pack: 6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For Polyethylene (PE), Polypropylene (PP), and Thin-Walled PVC disposer kits, tailpieces, and wall tubes of two standard sizes: 1-1/4" and 1-1/2" OD; both sizes with the same tool., Clean Automatic Deburring, Automatic beveling for immediate, easy joining to other sink drain pieces., 4X faster than a hacksaw., Easy-view windows ensure a straight cut on the marked pipe every time. |
|
|
Weight: 1-1/4 Lb., Pipe Capacity: 2", Std Pack: 1, Handle Length: 11-3/4", Strap Length: 17", Strap Width: 1/2" |
|
|
|
|
|
|
|
|
Soft solders 1/4" - 3" tube., Flameless soldering-easy-to-use., Twelve feet of cable., Fully contained in metal carrying case., Approved by CSA to CSA and UL standards (115V only). |
|
|
|
Designed for use in restricted spaces on small diameter copper, aluminum, brass and plastic tubing. |
|
|
|
For copper, brass, aluminum & thin-wall conduit. Features a fold-away reamer |
|
|
|
Enclosed feed screw to eliminate clogging and jamming. Grooved rolls for close-to-flare cuts. Spare cutter wheel in handle & fold-in reamer. Cuts copper, brass, aluminum tubing & thin wall conduit. |
|
|
|
The blade design and the ratcheting mechanism reduce the amount of force needed. With a 1 5/8" O.D., capacity, it easily cuts plastic pipe and tubing such as PVC and CPVC, as well as PEX, polyethylene, polybutylene and rubber hose., Durable aluminum construction, Burrless cutting provides a square cut |
|
|
|
The blade design and the ratcheting mechanism reduce the amount of force needed. With a 1 5/8" O.D., capacity, it easily cuts plastic pipe and tubing such as PVC and CPVC, as well as PEX, polyethylene, polybutylene and rubber hose., Durable aluminum construction, Burrless cutting provides a square cut |
|
|
|
|
|
|
|
Used in drain lines 1-1/4" - 2". Drop head leads into down drain pipes, especially good for back-to-back mounted fixtures & severe bends. Resists kinking. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. |
|
|
|
Used for easy cleaning of lines with a number of elbows. 1-1/8" diameter. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tough leather, heavily riveted for max. strength against rotating cable. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. |
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. |
|
|
|
Designed to retrieve all cables with 3/4" pitch. |
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
|
|
|
Most effective tool for sawing through heavy root stoppages. Used with all machines spinning 1-1/4 cable. Unique design permits backing out of badly damaged pipe without danger of locking. |
|
|
|
For cleaning back-to-back fixtures. Drop head leads into down drain pipe. |
|
|
|
|
|
|
|
|
|
|
Size: 5/16" x 50’, Weight: 7 Lb. |
|
|
|
|
Cuts 1-1/2 - 6 clay, cast-iron, asbestos, cement pipe & 4" class 22 watermain. Ratchet-action handle parallel to pipe allows for application in trenches of min. width. Complete with hand guard protects knuckles when cutting. |
|
|
|
The RIDGID 226 In-Place Soil Pipe Cutter is a compact, lightweight tool designed to cut hub and no-hub soil pipe in tight quarters., Only 17" long, the Model 226 is perfect for cutting cast iron, concrete and clay pipe where space is limited., The Model 226 is especially suited for against-the-wall and other tight quarter applications., From the Model 226 s compact design to its unique chain latching mechanism, every feature has been engineered for maximum productivity. |
|
|
|
|
|
|
Hose Length: 2,6 m ( 5,2 m span), Refrigerant: R-507, Capacity (Copper Tube): 1/2" x 2-1/2", Capacity (Steel Pipe): 1/2" x 2", Compressor: Rotary, 230V, 50 Hz, 2.4A, 505W, Dimensions LxWxH: 22-7/8" x 11" x 14-1/2" |
|
|
|
|
Designed for soft soldering (50/50, 95/5 Alloys) 1/4" - 1-1/2" Copper Tube. Six feet of cable., Flameless soldering easy-to-use., Built-in handle and cord wrap., Specially designed for repair and renovation jobs., Approved by CSA to CSA and UL standards (115V only). |
|
|
Motor: 1/3 HP, 115V, 60Hz Induction Motor or 1/3 HP, 230V Induction Motor, Switch: Toggle On/Off, Copper and Stainless Steel Fittings Capacity: 1/2" - 2", Copper and Stainless Steel Tube Capacity: 1/2" - 2", Cutter Wheel: Model 2191 HD Wheel, Reamer: Single Flute Cone, RH, 1/2" to 2", Roller Speed: 450 RPM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. |
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. |
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. |
|
|
|
|
|
|
|
Siphon jet urinal, Integral trapway, Wall-Mount, Concealed mounting bracket, hanger, bolts and washers. Less flushometer, Includes 3/4" top spud and hangers, The Mansfield limited lifetime warranty, Compatible Carriers Zurn Z1221 & Z1222 Series, Meets or exceeds ASME A112.19.-2008/CSA B45.1-08, Complies with ADA requirements for accessibility, Made in USA |
|
|
|
Siphon jet urinal, Integral trapway, Wall-Mount, Concealed mounting bracket, hanger, bolts and washers. Less flushometer, Includes 3/4" top spud and hangers, The Mansfield limited lifetime warranty, Compatible Carriers Zurn Z1221 & Z1222 Series, Meets or exceeds ASME A112.19.-2008/CSA B45.1-08, Complies with ADA requirements for accessibility, Made in USA |
|
|
|
5/16" or 35 of 3/8" |
|
|
|
Ideal for tough jobs up to 250 . Powerful, yet quiet universal motor & gearbox bear down as cutter engages tough obstructions., Specifications:, Powerful, yet quiet 4/10 HP, universal motor & gearbox, Cable spins at 200 RPM, CSA approved, Standard Accessories:, T-406 Spear Blade, T-407 Retrieving Auger, T-411 2" Double Cutter, T-413 3" Double Cutter, T408 Sawtooth Cutter, T403 3" P-Trap Cutter, T468 Flexible Leader, Leather Gloves, Tool Box & Hex Set, T-414B 4" Double Cutter (Blade only), T-416B 6" Double Cutter (Blade only) |
|
|
|
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter |
|
|
|
Cleans 1-1/2" through 2" lines after P-traps have been removed. |
|
|
|
1-1/4" cable. 15 Ft. standard all purpose cable with 3/9" pitch. |
|
|
|
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable |
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. |
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. |
|
|
|
45 ft. - 6 lengths C-8 Open Wind Cable, A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 Grease "C" Cutter, A-13 Coupling Pin, A-14-6 Guide Hose |
|
|
|
1-1/4" cable. 15 Ft. standard all purpose, cable with 1/2" pitch. |
|
|
|
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable |
|
|
|
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter |
|
|
|
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable |
|
|
|
Quality, oil tempered, flat spring steel wire tape for cleaning all sizes of sewers & drains. Automatic grip handle helps force tapes back & forth easily. Tapes furnished with spear point on one end & roller ball point on the other. |
|
|
|
Quality, oil tempered, flat spring steel wire tape for cleaning all sizes of sewers & drains. Automatic grip handle helps force tapes back & forth easily. Tapes furnished with spear point on one end & roller ball point on the other. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for tough jobs up to 250 . Powerful, yet quiet universal motor & gearbox bear down as cutter engages tough obstructions., Specifications:, Powerful, yet quiet 4/10 HP, universal motor & gearbox, Cable spins at 200 RPM, CSA approved, Standard Accessories:, T-406 Spear Blade, T-407 Retrieving Auger, T-411 2" Double Cutter, T-413 3" Double Cutter, T408 Sawtooth Cutter, T403 3" P-Trap Cutter, T468 Flexible Leader, Leather Gloves, Tool Box & Hex Set, T-414B 4" Double Cutter (Blade only), T-416B 6" Double Cutter (Blade only) |
|
|
|
Tough leather, heavily riveted for max. strength against rotating cable. |
|
|
|
New Features:, New Torque Limiter - Causes the drum to stop spinning when the blade becomes lodged in a blockage. Warns the operator when blockages are encountered., Contemporary Style Drum Design - Rugged, corrosion resistant, polyethylene drum is rust/dent proof & features larger access holes to drum interior. Positioned 90 to the floor for better cable control., New "Solid Core" Cable - Uses tough 3/8" or 1/2" Integral Wound (IW) solid core cable that is rugged & kink resistant. Each size comes in 50 or 75 lengths & utilizes a variety of the Ridgid quick connect cutter., Drum capacity is 100 of 3/8" or 75 of 1/2". 3/8" cable best for 1-1/2" to 3" lines up to 100 . 1/2" cable best for 2" to 4" lines up to 75 ., 3 HP motor spins cable at 190RPM, CSA approved., Approved to UL Standards (NRTLC). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model K-60SP Machine with: Operator s Mit, Pin Key & Rear Guide Hose, Plus: Tool Kit & Cable Kit., A compact machine for institutional, commercial/residential cleaning. Also ideal for septic tank, vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages, 1/2 HP motor. CSA approved., K-60SP-SE Includes:, K-60SP Machine, A-1 Operator s Mit, A-60-12 Rear guide hose, A-8 Cable Carrier, 5 Sections of C-10 7/8" Cable (75 ), T-101, T102 & T-125 Augers, T107 & T150-1 Cutters, A-3 Tool Box, A-12 Pin Key |
|
|
|
The Remote Transmitter is an accessory for the KD-4510 (T0553) & KD-4550 (T0559) Pointer TM Line Locating Equipment. It can be attached to drain cleaning cables, jetter hoses, or other pushing devices. |
|
|
|
|
|
|
|
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) |
|
|
|
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) |
|
|
|
|
|
|
|
|
|
|
|
Used in drain lines 1-1/4" - 2-1/2" such as kitchen sinks, lavatory sinks, slop sinks, & disposal waste lines. Flexible, yet tough, 3/8, " cable most commonly used after traps have been removed. |
|
|
|
Used in drain lines 1-1/4" - 2-1/2" such as kitchen sinks, lavatory sinks, slop sinks, & disposal waste lines. Flexible, yet tough, 3/8, " cable most commonly used after traps have been removed. |
|
|
|
Used for 2" & 3" floor drains. Tight wind cable providing good rigidity in a hollow core cable. Not for tree roots. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model K-60SP Machine with: Operator s Mit, Pin Key & Rear Guide Hose, Plus: Tool Kit & Cable Kit., A compact machine for institutional, commercial/residential cleaning. Also ideal for septic tank, vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages, 1/2 HP motor. CSA approved., K-60SP-SE Includes:, K-60SP Machine, A-1 Operator s Mit, A-60-12 Rear guide hose, A-8 Cable Carrier, 5 Sections of C-10 7/8" Cable (75 ), T-101, T102 & T-125 Augers, T107 & T150-1 Cutters, A-3 Tool Box, A-12 Pin Key |
|
|
|
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extra long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment. Can be converted to 3-wheel cutter. |
|
|
|
Extra long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment. Can be converted to 3-wheel cutter. |
|
|
|
|
|
|
Weight: 1/4 Lb., Std Pack: 1 |
|
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws. |
|
|
|
Nearly 40% lighter than comparable cast-iron models of the same size. Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. |
|
|
|
Nearly 40% lighter than comparable cast-iron models of the same size. Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. |
|
|
|
Nearly 40% lighter than comparable cast-iron models of the same size. Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. |
|
|
|
Nearly 40% lighter than comparable cast-iron models of the same size. Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. |
|
|
|
Nearly 40% lighter than comparable cast-iron models of the same size. Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. |
|
|
|
Nearly 40% lighter than comparable cast-iron models of the same size. Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. |
|
|
|
Nearly 40% lighter than comparable cast-iron models of the same size. Jaws and all other parts identical to RIDGID Heavy-Duty Wrenches. |
|
|
|
The blade design and the ratcheting mechanism reduce the amount of force needed. With a 1 5/8" O.D., capacity, it easily cuts plastic pipe and tubing such as PVC and CPVC, as well as PEX, polyethylene, polybutylene and rubber hose., Durable aluminum construction, Burrless cutting provides a square cut |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Weight: 48-1/2 Lb., Capacity: 1/2" to 2" Commercially-Available Schedule 5-40 Black Iron Pipe |
|
|
|
Capacity: 14.4V, 2.6Ah |
|
|
|
Weight: 23-1/10 Lb., Capacity: 1/2" to 2" Commercially-Available Schedule 5-40 Black Iron Pipe |
|
|
|
Size: 6’ |
|
|
|
|
|
|
|
|
|
|
|
Weight: 5 Lb., Pipe Capacity: 2-1/2" |
|
|