Loading ...

Loading ...

Search in: SHARKBITE

1" 150lb. 3" Long Shank Relief Valve
Locke Part #: E0599MFG Part #: FVMX-3LS 150#
1" 150lb. Long shank. AGA certified 500,000 btu/hr, ASME rated 2,155,000 btu/hr@150lb. For commercial hot water storage tanks.
Mfg Standards/Approvals: CSA Listed to ANSI Z21.22/CSA 4.4, NB Listed to ASME Boiler Code Section IV, Application: Commercial and Domestic Hot Water Heating, Nominal Size: 3/4, Pressure Rating: 150, Series: FWL-2, End Style: MNPT x FNPT, Media: Water, Body Material: Bronze Specifically for the protection of hot water supply systems: Offers protection from over pressure conditions that are likely to occur as a result of thermal expansion, Compact and economical: saves space and money, Every valve is tested for performance prior to shipping: specify and install with confidence, 200000 Btu/hr CSA rating, Brass and stainless steel internal part, silicone seat disc, stainless steel pressure spring 697285147370
Mfg Standards/Approvals: CSA Listed to ANSI Z21.22/CSA 4.4, NB Listed to ASME Boiler Code Section IV, Nominal Size: 3/4, Pressure Rating: 150, Temperature Rating: 210, Series: NCLX, End Style: MNPT x FNPT, Media: Hot Water, Actuator Type: Lever Handle, Body Material: Cast Bronze Incorporates an inert thermal element coating - provides effective isolation from mineral deposits (liming) and galvanic corrosion, Completely automatic and reseat after temperature or pressure relief - ideal for all domestic water heater application, Every valve is tested for performance prior to shipping - specify and install with confidence, 105000 Btu/hr CSA rating, 4 in L shank, Brass and stainless steel internal part, silicone seat disc, stainless steel pressure spring, Provides temperature and pressure protection for domestic water heater and storage tanks 697285158368
Package Length: 11.25, Package Height: 2.0, Package Width: 1.5, Package Volume: 33.75, Mfg Standards/Approvals: ANSI Z21.22/CSA 4.4, ASME Boiler Code Section IV, Application: Plumbing, Warranty: 2 Years, Nominal Size: 3/4, Pressure Rating: 150, Temperature Rating: 210, Top to Inlet Center: 1-9/16, Series: NCLX-8, End Style: MNPT x FNPT, Media: Hot Water, Actuator Type: Lever, Body Material: Bronze, Softgoods Material: Silicon Seat Disc, Domestic/Import: Domestic Provides temperature and pressure protection for domestic water heater and storage tanks, Incorporates an inert thermal element coating: Provides effective isolation from mineral deposits (liming) and galvanic corrosion, Completely automatic and reseats after temperature or pressure relief: Ideal for all domestic water heater applications, Every valve is tested for performance prior to shipping: Specify and install with confidence, 150 psi factory setting 697285163720
Mfg Standards/Approvals: ANSI Z21.22, CSA 4.4, NB Listed, Application: For Commercial and Domestic Hot Water Heating Applications, Warranty: 2 Years Limited, Nominal Size: 3/4, Pressure Rating: 150, Temperature Rating: 210, Type: High Capacity, Series: FVMX, End Style: MNPT, Media: Hot Water, Body Material: Brass, Softgoods Material: EPDM Diaphragm Offers high capacity protection for domestic and commercial hot water heating devices - handles more volume with just one relief valve, Completely automatic - the valves reseat after either temperature or pressure relief, The larger series valves are well suited for commercial applications - restaurants, hospitals, and laundries are no problem, Silicone seat disc, Stainless steel pressure spring, 8C male inlet 697285169357
Mfg Standards/Approvals: ASSE 1011, CSA 64.2, IAPMO Listed, Application: Around Homes, Schools, Commercial Buildings, Laboratories or any place involving removable hoses attached to Threaded Faucets, Indoors or Outdoors, Commercial and Residential, Nominal Size: 3/4, Pressure Rating: 125, Temperature Rating: 180, Type: Self Draining Hose Connection, Series: VB-222, End Style: N-Hose, Media: Water, Body Material: Brass, Dimensions: 1-5/16 in L x 2 in H, Domestic/Import: Domestic Prevents dangerous back-siphon age: Automatically drains when attachments are removed from the valve's outlet, Freeze proof self-draining hose: Protects the valve and faucet from freezing and rupturing in cold weather 697285196001
Mfg Standards/Approvals: ANSI Z21.22, CSA 4.4, NB Listed, Application: For Domestic Water Heater and Storage Tanks, Warranty: 2 Years Limited, Nominal Size: 3/4, Pressure Rating: 150, Temperature Rating: 210, Series: NCLX, End Style: MNPT x FNPT, Media: Water, Actuator Type: Lever Handle, Body Material: Bronze Incorporates an inert thermal element coating - provides effective isolation from mineral deposits (liming) and galvanic corrosion, Completely automatic and reseats after temperature or pressure relief - ideal for all domestic water heater applications, Every valve is tested for performance prior to shipping - specify and install with confidence, Silicone seat disc, Stainless steel pressure spring 697285197831
Country of Origin: US, Package Length: 5.0, Package Height: 5.0, Package Width: 10.0, Package Volume: 250.0, Application: Smaller Boiler Feed Lines, Warranty: 2 Years Limited, Nominal Size: 1/2, Pressure Rating: 170, Temperature Rating: 180, Type: Non-Potable, Series: BFAC, End Style: C Union, Backflow Type: Reduced Pressure, Body Material: Brass, Dimensions: 8-11/16 in L x 6-15/16 in H, Domestic/Import: Domestic two vital functions in one unit pressure reduction and prevention of water backflow in one compact valve, A-89 contains a polymer seat prevents scaling, Economical and easy to install saves money and time, Features a double-check vacuum breaker backflow system effectively prevents the reverse flow of polluted water, Rapid fill and balanced piston allows for closer outlet control higher capacity, constant water flow 697285230293
Mfg Standards/Approvals: ASSE 1003, CSA B356, IAPMO Listed, NSF/ANSI 372/61, Application: For Commercial and Domestic Water Applications, Nominal Size: 3/4, Pressure Rating: 45, Temperature Rating: 180, Inlet to Outlet Length: 5.49, Top to Inlet Center: 4.92, Type: Single-Union, Series: EB25, End Style: NPT, Media: Water, Body Material: Bronze, Trim Material: Stainless Steel, Softgoods Material: EPDM Diaphragm/Polysulphone Body Seat Convenient orange twist-cap eliminates need for wrench adjustment, numerical indicator shows the pressure without the need for a gauge one person can install, saving money and time, Single piece cartridges can be removed with valve body remaining in place-service all the parts quicker and easier, Integral backpass check with the cartridge-no add-on or small parts, longer life and more reliable performance, Cutting edge design and production incorporates micro-fingers that dissipate noise due to water flow across the seat-meets the latest stringent international standards, quieter installation, Available with a blanking cap for rough in installations-no more dummy valve necessary, Optional closing cap for direct burial applications-protects the cartridge from external elements, Lead free, 20 to 90 psi outlet pressure range, 300 psi maximum inlet pressure 697285231368
Mfg Standards/Approvals: ASSE 1003, CSA B356, IAPMO Listed, NSF/ANSI 372/61, Application: For Commercial and Domestic Water Applications, Nominal Size: 1, Pressure Rating: 45, Temperature Rating: 180, Inlet to Outlet Length: 5.72, Top to Inlet Center: 4.92, Type: Single-Union, Series: EB25, End Style: NPT, Media: Water, Body Material: Bronze, Trim Material: Stainless Steel, Softgoods Material: EPDM Diaphragm/Polysulphone Body Seat Convenient orange twist-cap eliminates need for wrench adjustment, numerical indicator shows the pressure without the need for a gauge one person can install, saving money and time, Single piece cartridges can be removed with valve body remaining in place-service all the parts quicker and easier, Integral backpass check with the cartridge-no add-on or small parts, longer life and more reliable performance, Cutting edge design and production incorporates micro-fingers that dissipate noise due to water flow across the seat-meets the latest stringent international standards, quieter installation, Available with a blanking cap for rough in installations-no more dummy valve necessary, Optional closing cap for direct burial applications-protects the cartridge from external elements, Lead free, 20 to 90 psi outlet pressure range, 300 psi maximum inlet pressure 697285231382
Application: For the maintenance and repair of the internal components of existing PRV devices, Warranty: 2 Years Limited, Series: EB25, Specifications: 0 to 180 deg F, 1/2 to 1 in, Material: Nylon 697285231481
Mfg Standards/Approvals: ASSE 1003, CSA B356, IAPMO Listed, NSF/ANSI 372/61, Application: For Commercial and Domestic Water Applications, Nominal Size: 1, Pressure Rating: 45, Temperature Rating: 180, Inlet to Outlet Length: 5.17, Top to Inlet Center: 4.35, Type: Single-Union, Series: EB45, End Style: NPT, Media: Water, Body Material: Bronze, Trim Material: Brass/Stainless Steel, Softgoods Material: EPDM O-Ring Modular cartridge design reduces the number of parts requiring service-quick and easy service/repair, Rugged bronze body-superior reliability, improved user safety, Compact pressure reducing and regulating valves-designed for small and economic considerations, By-pass mechanism integral with the cartridge-no add-on or small parts, longer life and more reliable performance, Every valve is tested for performance prior to shipping-specify and install with confidence, Lead free, 400 psi maximum inlet pressure, 10 to 70 psi outlet pressure range, Reinforced EPDM diaphragm, Stainless steel strainer screen 697285231559
Mfg Standards/Approvals: ANSI Z21.22, CSA 4.4, NB Listed, Application: For Commercial and Domestic Hot Water Heating Applications, Warranty: 2 Years Limited, Nominal Size: 3/4, Pressure Rating: 150, Temperature Rating: 210, Type: High Capacity, Series: FVMX, End Style: MNPT x FNPT, Media: Water, Body Material: Brass, Softgoods Material: EPDM Diaphragm Offers high capacity protection for domestic and commercial hot water heating devices - handles more volume with just one relief valve, Completely automatic - the valves reseat after either temperature or pressure relief, The larger series valves are well suited for commercial applications - restaurants, hospitals, and laundries are no problem, Silicone seat disc, Stainless steel pressure spring, Lead free 697285232556
Package Length: 2.5, Package Height: 2.0, Package Width: 11.26, Package Volume: 56.3, Mfg Standards/Approvals: CSA Listed to ANSI Z21.22/CSA 4.4, ASME Boiler Code Section IV, Application: Plumbing, Warranty: 2 Years, Nominal Size: 1, Pressure Rating: 75 to 150, Temperature Rating: 210, Top to Inlet Center: 3-15/32, Series: FVMX-5C, End Style: MNPT x FNPT, Media: Hot Water, Body Material: Brass, Softgoods Material: Silicon Seat Disc, Domestic/Import: Domestic Offers high capacity protection for domestic and commercial hot water heating devices: Handles more volume with just one relief valve, Completely automatic: The valves reseat after either temperature or pressure relief, Brass and stainless steel internal parts, Stainless steel pressure spring, EP diaphragm, Male inlet, Lead free, 150 psi factory setting 697285232761
Mfg Standards/Approvals: ASSE 1003, CSA B356, IAPMO Listed, NSF/ANSI 372/61, Application: For Commercial and Domestic Water Applications, Nominal Size: 3/4, Pressure Rating: 45, Temperature Rating: 180, Inlet to Outlet Length: 4.15, Top to Inlet Center: 4.37, Type: Single-Union, Series: EB45, End Style: NPT, Media: Water, Body Material: Bronze, Trim Material: Brass/Stainless Steel, Softgoods Material: EPDM O-Ring Modular cartridge design reduces the number of parts requiring service-quick and easy service/repair, Rugged bronze body-superior reliability, improved user safety, Compact pressure reducing and regulating valves-designed for small and economic considerations, By-pass mechanism integral with the cartridge-no add-on or small parts, longer life and more reliable performance, Every valve is tested for performance prior to shipping-specify and install with confidence, Lead free, 400 psi maximum inlet pressure, 10 to 70 psi outlet pressure range, Reinforced EPDM diaphragm, Stainless steel strainer screen 697285238954
Country of Origin: AU, Package Length: 13.2, Package Height: 14.3, Package Width: 5.7, Package Volume: 1075.93, Mfg Standards/Approvals: ASSE 1017, 1069 and 1070, CSA B125.3, IAPMO Listed, NSF/ANSI 372, NSF/ANSI 61, Application: Plumbing Applications, Warranty: 5 Years, Pressure Rating: 230, Temperature Rating: 85 to 130, Series: HG110-D, Flow Rate: 1 to 20 gpm, Valve Type: Integral Check, Inlet Connection: 3/4 in C, Outlet Connection: 3/4 in C, Material: Bronze, Dimensions: 5.17 in OAL x 4.91 in OAH, Domestic/Import: Import Domestic and commercial hot water distribution, To control water temperature at the source of heat (hot water tank), point-of-use (sinks, lavatories, or bath tubs) or multiple fixtures, Certified for distribution and point-of-use applications: Safer hot water from all outlets, Allows the water heater to be set at 140 deg F (60 deg C) or higher: Greater effective hot water volume yields less chance of Legionella within the cylinder, Every valve is tested for performance prior to shipping: Specify and install with confidence, Robust, low complexity construction: Superior reliability, improved user safety, Adjustable and lockable mechanism: Minimizes unauthorized tampering with valve setting Factory set, locked to max 120 deg F, 120 to 180 deg F hot/39 to 80 deg F cold temperature supply range, Brass internal cap, stainless steel spring, Lead free 697285245020
Country of Origin: AU, Package Length: 5.19684, Package Height: 5.62991, Package Width: 2.16535, Package Volume: 63.35, Mfg Standards/Approvals: ASSE 1017, 1069 and 1070, CSA B125.3, IAPMO Listed, NSF/ANSI 372, NSF/ANSI 61, Application: Plumbing Applications, Warranty: 5 Years, Pressure Rating: 230, Temperature Rating: 85 to 130, Series: HG110-D, Flow Rate: 1 to 20 gpm, Valve Type: Integral Check, Inlet Connection: 3/4 in MNPT, Outlet Connection: 3/4 in MNPT, Material: Bronze, Dimensions: 6.19 in OAL x 5.42 in OAH, Domestic/Import: Import Domestic and commercial hot water distribution, To control water temperature at the source of heat (hot water tank), point-of-use (sinks, lavatories, or bath tubs) or multiple fixtures, Certified for distribution and point-of-use applications: Safer hot water from all outlets, Allows the water heater to be set at 140 deg F (60 deg C) or higher: Greater effective hot water volume yields less chance of Legionella within the cylinder, Every valve is tested for performance prior to shipping: Specify and install with confidence, Robust, low complexity construction: Superior reliability, improved user safety, Adjustable and lockable mechanism: Minimizes unauthorized tampering with valve setting Factory set, locked to max 120 deg F, 120 to 180 deg F hot/39 to 80 deg F cold temperature supply range, Brass internal cap, stainless steel spring, Lead free 697285245112
Package Length: 15.0, Package Height: 8.858, Package Width: 2.0, Package Volume: 265.74, Mfg Standards/Approvals: ASSE 1017, ASSE 1070, CSA B125.3, NSF/ANSI 61/372, NSF 61/372, Listed by ASSE, IAPMO, UPC Listed, Application: Plumbing, Includes: Thermostatic Mixing Valve (TMV), Corrugated Hose, Temperature Gauge, Water Heater Tee, Warranty: 5 Years, Nominal Size: 3/4, Pressure Rating: 150, Temperature Rating: 90 to 130, End Style: MNPT x FNPT x NPSH, Port Type: Integral Recirculation, Media: Water, Body Material: Brass, Softgoods Material: EPDM Seal, Dimensions: 3.5 in OAL x 6.7 in OAH, Domestic/Import: Import Precise temperature control: Safer hot water from all outlets, Allows the water heater to be set at 140°F (60 deg C) or higher: Greater effective hot water volume and less chance of Legionella within the cylinder, Every valve is tested for performance prior to shipping: Specify and install with confidence, More hot water from the same water heater: Higher storage temperature means a greater effective hot water volume delivered at a safe 120 deg F (49 deg C), Robust, low complexity construction: Superior reliability, improved user safety, Adjustable and lockable mechanism: Minimizes unauthorized tampering with valve setting, Factory set at 120 deg F (49 deg C), Listed by IAPMO and ASSE: Inspector friendly, peace of mind, Integral recirculation port: Allows quick and neat installations in systems with recirculation, Includes the Tank Booster Temperature Gauge: Allows visual verification of water outlet temperature, 195 deg F Max hot temperature supply range, 39 to 80 deg F cold temperature supply range, Stainless steel springs, Brass internal cap, Engineered polymer piston, Noryl GFN2 guide tube, 115 to 120 deg F factory setting, 120 to 180 deg F hot temperature supply 697285246447
Mfg Standards/Approvals: IPC/IAPMO Listed, UPC Listed, Application: For Lavatory and Toilets, Hole Size: 5/8, Load Capacity: 25, Material: Cold Rolled Steel, Finish: Copper-Bonded, Dimensions: 25-1/2 in L x 1-3/4 in W Copper-bonded, heavy-gage steel, Attaches to stud wall framing, Fits 1/2 in CTS pipe, Has 5/8 in holes for 1/2 in copper tubing on 2 in centers, 7 holes, Ideal for copper bullets requiring a more rigid installation 671119101263
Mfg Standards/Approvals: IPC/IAPMO Listed, UPC Listed, Application: For Water Heater, Relief Lines, Load Capacity: 25, Material: Cold Rolled Steel, Finish: Copper-Bonded, Dimensions: 25-1/2 in L x 1-3/4 in W Copper-bonded, heavy-gage steel, Alternating 7/8 and 1-1/8 in holes on 4 in centers for 3/4 and 1 in copper tubing, Fits 3/4 and 1 in CTS pipe, 7 holes
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, IAPMO/IPC/UPC Listed, Application: Sink, Pre-fab, Pipe on Pipe Support, Lavatory, Load Capacity: 25, Thickness: 16 ga, Material: Cold Rolled Steel, Finish: Copper-Bonded, Dimensions: 9.31 in L x 2 in W Heavy-gauge steel bracket, For 1/2 in copper tubing on 4, 6 and 8 in centers, Install directly to the waste/vent pipe prior to studs being erected, Easy pre-fabrication at the shop or on the job site, For use with pipe size 1/2 in CTS
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, IAPMO/IPC/UPC Listed, Application: Vertical, Sink, Pre-fab, Pipe on pipe support, Lavatory, Horizontal, Load Capacity: 25, Thickness: 16 ga, Material: Cold Rolled Steel, Finish: Copper-Bonded, Dimensions: 9-1/2 in L x 1-1/2 in W, Domestic/Import: Domestic Steel bracket mounts directly to waste/vent pipe, Supports 1/2 in tubing on 4, 6, 8 in centers and 3/4 in tubing on 4 and 8 in centers, Includes isolating felt and stainless steel clamp for attachment to support piping, Horizontal or vertical support, For use with pipe sizes 1/2 in, 3/4 in CTS 671119101119
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, IAPMO/IPC/UPC Listed, Application: Toilet, Pre-Fab, Thickness: 16 ga, Material: Cold Rolled Steel, Finish: Copper-Bonded, Dimensions: 23-1/4 in L x 2-1/2 in W, Domestic/Import: Domestic Heavy-gauge steel bracket mounts directly to 4 bolt toilet carrier and positions flush valve at height of 11-1/2 in above toilet, For 1 in flush valve support, Allows for rough-in prior to framing being erected, 4-1/2 in offset center line rough-in, Provides consistent rough-in dimensions, Works with all 4 bolts siphon jet carriers, For use with pipe size 1 in CTS 671119101140
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, Application: Toilet, Pre-Fab, These iconic solutions are ideal for government and military projects, Type: Flat, Material: Cold Rolled Steel, Finish: Copper Bonded, Dimensions: 23-1/4 in H x 2-1/2 in W, Domestic/Import: Domestic Heavy gauge brackets mount directly to 4-bolt toilet carrier and position flush valve at height of 11-1/2 in above toilet, Allows for rough-in prior to framing being erected, Provides 4-3/4 in off set rough-in for right or left hand, 16 ga copper Bonded cold rolled steel, 1 in CTS pipe 671119131147
Mfg Standards/Approvals: ASSE 1061, IAPMO Listed, IGC 157-2010, NSF/ANSI 61,NSF/ANSI 372-2010, Application: For Potable Water or Hydronic Water Heating System, Nominal Size: 3/4, Pressure Rating: 200, Temperature Rating: 200, Inlet to Outlet Length: 3.62, End Style: Push-Fit, Port Type: Full, Media: Water, Actuator Type: Lever Handle, Ball Material: Brass, Body Material: Brass, Trim Material: Brass, Softgoods Material: EPDM O-Ring, Finish: Chrome Plated Convenient single lever control - makes them easy to use and encourages shut-off of water supply, Full port ball valve - allows water to flow freely through valve, Instant push-to-connect connections for increased ease of use - no soldering, clamps, unions or glue required, Valve assembled to strict quality standards - measured thread engagement, measured torque, Brass body end retainer, zinc plated steel handle, DZR lead free brass body, PTFE seat ring/packing 697285956521
Mfg Standards/Approvals: ASSE 1061, IAPMO Listed, IGC 157-2010, NSF/ANSI 61,NSF/ANSI 372-2010, Application: For Potable Water or Hydronic Water Heating System, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Inlet to Outlet Length: 3.06, End Style: Push-Fit, Port Type: Full, Media: Water, Actuator Type: Lever Handle, Ball Material: Brass, Body Material: Brass, Trim Material: Brass, Softgoods Material: EPDM O-Ring, Finish: Chrome Plated Convenient single lever control - makes them easy to use and encourages shut-off of water supply, Full port ball valve - allows water to flow freely through valve, Instant push-to-connect connections for increased ease of use - no soldering, clamps, unions or glue required, Valve assembled to strict quality standards - measured thread engagement, measured torque, Brass body end retainer, zinc plated steel handle, DZR lead free brass body, PTFE seat ring/packing 697285956514
Mfg Standards/Approvals: ASSE 1061, IAPMO Listed, IGC 157-2010, NSF/ANSI 61,NSF/ANSI 372-2010, Application: For Potable Water or Hydronic Water Heating System, Nominal Size: 1, Pressure Rating: 200, Temperature Rating: 200, Inlet to Outlet Length: 4.4, End Style: Push-Fit, Port Type: Full, Media: Water, Actuator Type: Lever Handle, Ball Material: Brass, Body Material: Brass, Trim Material: Brass, Softgoods Material: EPDM O-Ring, Finish: Chrome Plated Convenient single lever control - makes them easy to use and encourages shut-off of water supply, Full port ball valve - allows water to flow freely through valve, Instant push-to-connect connections for increased ease of use - no soldering, clamps, unions or glue required, Valve assembled to strict quality standards - measured thread engagement, measured torque, Brass body end retainer, zinc plated steel handle, DZR lead free brass body, PTFE seat ring/packing 697285956537
Mfg Standards/Approvals: ASSE 1061, ANSI/NSF 61, cPUC Listed, IAPMO Listed, NSF 75, Includes: (2) U008LF 1/2 in Push-to-Connect Coupling, (2) U016LF 3/4 in Push-to-Connect Coupling, (2) U058LF 3/4 x 1/2 in Push-to-Connect Reducing Coupling, (2) U072LF 1/2 in Push-to-Connect x 1/2 in FNPT Coupling, (2) U088LF, Warranty: 1 Year Limited, Specifications: 200 psi, 0 to 200 deg F, Number of Pieces: 26, Material: DZR Brass Tube Lead free, DZR brass tube 697285956582
Country of Origin: US, Package Length: 12.0, Package Height: 3.0, Package Width: 12.0, Package Weight: 4.37, Package Volume: 432.0, Application: For Plumbing, Warranty: 1 Year, Capacity: 200 Use to remove 3/8, 1/2, 3/4 and 1 in SharkBite crimp rings, 6 in handle 697285915169
Mfg Standards/Approvals: ASSE 1003/1061, CSA B356, IAPMO Listed, NSF/ANSI 372/61, Application: For Commercial and Domestic Water Applications, Nominal Size: 3/4, Pressure Rating: 45, Temperature Rating: 180, Inlet to Outlet Length: 4.48, Top to Inlet Center: 4.37, Series: EB45, End Style: Push-Fit, Media: Water, Body Material: Bronze, Trim Material: Brass/Stainless Steel, Softgoods Material: EPDM O-Ring Modular cartridge design reduces the number of parts requiring service-quick and easy service/repair, Instant push-fit connections for increased ease of use-no soldering, glue or tools required to make connection, Rugged bronze body-superior reliability, improved user safety, Compact pressure reducing valves-smaller installation footprint and economically priced, Back-pass check mechanism integral with the cartridge-no add-on or small parts, longer life and more reliable performance, Every valve is tested for performance prior to shipping-specify and install with confidence, Lead free, 200 psi maximum pressure, 10 to 70 psi outlet pressure range, Reinforced EPDM diaphragm polyphenylene ether PS body seat 697285238084
Country of Origin: US, Package Length: 5.945, Package Height: 1.61, Package Width: 5.28, Package Weight: 1.802, Package Volume: 50.53, Mfg Standards/Approvals: ASSE 1017, 1069 and 1070, CSA B125.3, IAPMO Listed, NSF/ANSI 372, NSF/ANSI 61, Application: Plumbing Applications, Warranty: 5 Years, Pressure Rating: 230, Inlet Connection: 1/2, Outlet Connection: 1/2, Temperature Rating: 85 to 130, Series: HG110-D, Flow Rate: 1 to 20 gpm, Valve Type: Integral Check, Material: Bronze, Dimensions: 5.94 in OAL x 5.36 in OAH, Domestic/Import: Domestic Domestic and commercial hot water distribution, To control water temperature at the source of heat (hot water tank), point-of-use (sinks, lavatories, or bath tubs) or multiple fixtures, Certified for distribution and point-of-use applications: Safer hot water from all outlets, Allows the water heater to be set at 140 deg F (60 deg C) or higher: Greater effective hot water volume yields less chance of Legionella within the cylinder, Every valve is tested for performance prior to shipping: Specify and install with confidence, Adjustable and lockable mechanism: Minimizes unauthorized tampering with valve setting Factory set, locked to max 120 deg F, Robust, low complexity construction: Superior reliability, improved user safety, 120 to 180 deg F hot/39 to 80 deg F cold temperature supply range, Brass internal cap, stainless steel spring, Lead free 697285245488
Country of Origin: US, Package Length: 5.89, Package Height: 1.61, Package Width: 5.252, Package Weight: 1.776, Package Volume: 49.8, Mfg Standards/Approvals: ASSE 1017, 1069 and 1070, CSA B125.3, IAPMO Listed, NSF/ANSI 372, NSF/ANSI 61, Application: Plumbing Applications, Warranty: 5 Years, Pressure Rating: 230, Inlet Connection: 3/4, Outlet Connection: 3/4, Temperature Rating: 85 to 130, Series: HG110-D, Flow Rate: 1 to 20 gpm, Valve Type: Integral Check, Material: Bronze, Dimensions: 5.89 in OAL x 5.34 in OAH, Domestic/Import: Domestic Domestic and commercial hot water distribution, To control water temperature at the source of heat (hot water tank), point-of-use (sinks, lavatories, or bath tubs) or multiple fixtures, Certified for distribution and point-of-use applications: Safer hot water from all outlets, Allows the water heater to be set at 140 deg F (60 deg C) or higher: Greater effective hot water volume yields less chance of Legionella within the cylinder, Every valve is tested for performance prior to shipping: Specify and install with confidence, Adjustable and lockable mechanism: Minimizes unauthorized tampering with valve setting Factory set, locked to max 120 deg F, Robust, low complexity construction: Superior reliability, improved user safety, 120 to 180 deg F hot/39 to 80 deg F cold temperature supply range, Brass internal cap, stainless steel spring, Lead free 697285245495
Mfg Standards/Approvals: ASME A112.18.1, ASSE 1061, CSA B125.1, NSF/ANSI 61, NSF/ANSI 372/61, Application: For Dishwashers, Humidifiers and Ice Makers, Nominal Size: 1/2 x 1/2 x 1/4, Pressure Rating: 200, Temperature Rating: 200, Inlet to Outlet Length: 2.72, Top to Inlet Center: 1-3/4, Type: 1/4 Turn, End Style: SB x SB x Compression, Media: Water, Body Material: Brass, Softgoods Material: EPDM O-Ring Instant push-fit connection for increased ease of use-no soldering, clamps, unions or glue required, Fits copper tubing, CTS CPVC, PEX and PE-RT pipe-connects all four types in any combination, Integral tube liner for PEX installations-means no loose components and ensures a secure, reliable connection, Stainless steel grade 316 grab ring, Veradel tube support liner 697285021624
Mfg Standards/Approvals: ASME A112.18.1, ASSE 1061, CSA B125.1, NSF/ANSI 61, NSF/ANSI 372/61, Application: For Dishwashers, Humidifiers and Ice Makers, Nominal Size: 1/2 x 1/2 x 3/8, Pressure Rating: 200, Temperature Rating: 200, Inlet to Outlet Length: 2.47, Top to Inlet Center: 1.89, Type: 1/4 Turn, End Style: SB x SB x Compression, Media: Water, Body Material: Brass, Softgoods Material: EPDM O-Ring Instant push-fit connection for increased ease of use-no soldering, clamps, unions or glue required, Fits copper tubing, CTS CPVC, PEX and PE-RT pipe-connects all four types in any combination, Integral tube liner for PEX installations-means no loose components and ensures a secure, reliable connection, Stainless steel grade 316 grab ring, Veradel tube support liner 697285249844
Mfg Standards/Approvals: ASME A112.18.1, ASSE 1061, CSA B125.1, NSF/ANSI 61, NSF/ANSI 372/61, Application: For Dishwashers, Humidifiers and Ice Makers, Nominal Size: 1/2 x 1/2 x 1/4, Pressure Rating: 200, Temperature Rating: 200, Inlet to Outlet Length: 2.47, Top to Inlet Center: 2.08, Type: 1/4 Turn, End Style: SB x SB x Compression, Media: Water, Body Material: Brass, Softgoods Material: EPDM O-Ring Instant push-fit connection for increased ease of use-no soldering, clamps, unions or glue required, Fits copper tubing, CTS CPVC, PEX and PE-RT pipe-connects all four types in any combination, Integral tube liner for PEX installations-means no loose components and ensures a secure, reliable connection, Stainless steel grade 316 grab ring, Veradel tube support liner 697285021662
Country of Origin: US, Package Weight: 15.0, Mfg Standards/Approvals: Buy American Act Compliant, Application: Water Heater support, Equipment support, Length: 21-1/2, Width: 21-1/2, Height: 16, Type: Assembled, Suitable For Use With: Up to 52 gal/650 lb Water Heater, Finish: Galvanized, Domestic/Import: Domestic Stands safely elevates water heaters and other equipment above the floor (650 lb rating) 671119903027
Country of Origin: US, Package Weight: 25.5, Mfg Standards/Approvals: Buy American Act Compliant, Application: Water Heater support, Equipment support, Length: 24, Width: 24, Height: 16, Type: Assembled, Suitable For Use With: Up to 100 gal/1200 lb Water Heater, Finish: Galvanized, Domestic/Import: Domestic Stands safely elevates water heaters and other equipment above the floor (1200 lb rating) 671119903058
Country of Origin: US, Package Weight: 36.0, Mfg Standards/Approvals: Buy American Act Compliant, Application: Water Heater support, Equipment support, Length: 30, Width: 30, Height: 16, Type: Unassembled, Suitable For Use With: Up to 100 to 120 gal/1350 lb Water Heater, Finish: Galvanized, Domestic/Import: Domestic Stands safely elevates water heaters and other equipment above the floor (13500 lb rating) 671119303346
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, Application: Water Heater support, Equipment support, Includes: 1 in MIP/Socket PVC Drain Fitting, Length: 21-1/4, Width: 21-1/4, Height: 2-1/2, Suitable For Use With: Up to 20 gal, 375 lb Water Heater, Finish: Galvanized, Domestic/Import: Domestic Ceiling mounted equipment platform, Pre-assembled and water-tight, Wide platform allows water heaters up to 21-1/4 in Dia, Watertight corner and drain fitting eliminate need for additional drain pan, Cross braces for seismic restraint, Four corner attachment points allows for seismic/sway bracing connection, Adapts to 3/8 in or 1/2 in threaded hanger rod 671119903102
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, Application: Water Heater support, Equipment support, Includes: 1 in MIP/Socket PVC Drain Fitting, Hanger Rods and Hardware, Length: 21-1/4, Width: 21-1/4, Height: 2-1/2, Suitable For Use With: Up to 20 gal, 375 lb Water Heater, Finish: Galvanized, Domestic/Import: Domestic Wall mounted equipment platform, Pre-assembled and water-tight, Can adapt to concrete or framed walls, Wide platform allows water heaters up to 21-1/4 in Dia, Watertight corners and drain fittings eliminate need for additional drain pan 671119140415
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, Application: Water Heater Support, Equipment Support, These iconic solutions are ideal for government and military projects, Includes: 1 in MIP/Socket PVC Drain Fitting, Length: 26-1/2, Width: 26-1/2, Height: 2-1/2, Suitable For Use With: Up to 50 gal Water Heater, Material: Cold Rolled Steel, Finish: Galvanized, Domestic/Import: Domestic Ceiling mount, Drain pan: 26-1/2 in Dia with 1 in PVC drain fitting, Cross braces for seismic restraint, Adapts to 3/8 or 1/2 in threaded hanger rod, 12 ga cold rolled steel, Wide platform allows water heaters up to 26-1/2 in Dia, Watertight corners and drain fittings eliminate need for additional drain pan, Four corner attachment points allows for seismic/sway bracing connection 671119903119
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, Application: Water Heater support, Equipment support, Includes: 1 in MIP/Socket PVC Drain Fitting, Hanger Rods and Hardware, Length: 26-1/2, Width: 26-1/2, Height: 2-1/2, Suitable For Use With: Up to 50 gal, 600 lb Water Heater, Finish: Galvanized, Domestic/Import: Domestic Wall mounted equipment platform, Pre-assembled and water-tight, Can adapt to concrete or framed walls, Wide platform allows water heaters up to 26-1/2 in Dia, Watertight corners and drain fittings eliminate need for additional drain pan 671119150513
Country of Origin: CH, Package Weight: 0.84, Mfg Standards/Approvals: AB1953/NSF372, ISO6509, NSF 14 Compliant, Nominal Size: 1-1/4, Pressure Rating: 200, Type: Removable Reusable, Fitting/Connector Type: Push-Fit, Temperature Rating: 20 to 200 deg F, Material: Brass, Dimensions: 3.26 in L, Domestic/Import: Import Cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time, Requires a special Demount Tool and cannot be accidentally disconnected/released, Easy installation, Fittings cannot be disassembled, Lead free desiccation resistance brass, Provides pipe support against lateral pipe forces, Features fastest connection 697285500518
Country of Origin: CH, Package Weight: 1.15, Mfg Standards/Approvals: AB1953/NSF372, ISO6509, NSF 14 Compliant, Nominal Size: 1-1/2, Pressure Rating: 200, Type: Removable Reusable, Fitting/Connector Type: Push-Fit, Temperature Rating: 20 to 200 deg F, Material: Brass, Dimensions: 4.37 in L, Domestic/Import: Import Cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time, Requires a special Demount Tool and cannot be accidentally disconnected/released, Easy installation, Fittings cannot be disassembled, Lead free desiccation resistance brass, Provides pipe support against lateral pipe forces, Features fastest connection 697285500525
Package Weight: 1.56, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 2, Length: 4.8, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter Straight, Series: 2XL, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285000766
Package Weight: 1.07, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: Commercial/Residential Applications For Potable Water, Hydronic Heating, Chilled Water and General Water Distribution For Irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/4, Length: 2.8, Pressure Rating: 200, Temperature Rating: 20 to 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspector, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285000902
Package Weight: 1.52, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: Commercial/Residential Applications For Potable Water, Hydronic Heating, Chilled Water and General Water Distribution For Irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/2, Length: 3.16, Pressure Rating: 200, Temperature Rating: 20 to 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspector, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285000919
Package Weight: 2.18, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: Commercial/Residential Applications For Potable Water, Hydronic Heating, Chilled Water and General Water Distribution For Irrigation, Warranty: 25 Years Limited, Nominal Size: 2, Length: 3.6, Pressure Rating: 200, Temperature Rating: 20 to 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspector, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285000933
Package Weight: 1.61, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/4, Length: 6-1/2, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285001084
Package Weight: 2.26, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/2, Length: 6.7, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285001091
Package Weight: 3.07, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 2, Length: 7.99, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285001237
Country of Origin: CH, Package Weight: 0.57, Mfg Standards/Approvals: AB1953/NSF372, ISO6509, NSF 14 Compliant, Nominal Size: 1-1/4, Pressure Rating: 200, Type: Removable Reusable, Fitting/Connector Type: Push-Fit, Temperature Rating: 20 to 200 deg F, Material: Brass, Dimensions: 2.35 in L x 2.35 in W, Domestic/Import: Import Cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time, Requires a special Demount Tool and cannot be accidentally disconnected/released, Easy installation, Fittings cannot be disassembled, Lead free desiccation resistance brass, Provides pipe support against lateral pipe forces, Features fastest connection 697285500877
Country of Origin: CH, Package Weight: 0.82, Mfg Standards/Approvals: AB1953/NSF372, ISO6509, NSF 14 Compliant, Nominal Size: 1-1/2, Pressure Rating: 200, Type: Removable Reusable, Fitting/Connector Type: Push-Fit, Temperature Rating: 20 to 200 deg F, Material: Brass, Dimensions: 2.62 in L x 2.62 in W, Domestic/Import: Import Cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time, Requires a special Demount Tool and cannot be accidentally disconnected/released, Easy installation, Fittings cannot be disassembled, Lead free desiccation resistance brass, Provides pipe support against lateral pipe forces, Features fastest connection 697285500884
Country of Origin: CH, Package Weight: 1.25, Mfg Standards/Approvals: AB1953/NSF372, ISO6509, NSF 14 Compliant, Pressure Rating: 200, Type: Removable Reusable, Fitting/Connector Type: Push-Fit, Nominal Size: 2 in, Temperature Rating: 20 to 200 deg F, Material: Brass, Dimensions: 2.89 in L x 2.89 in W, Domestic/Import: Import Cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time, Requires a special Demount Tool and cannot be accidentally disconnected/released, Easy installation, Fittings cannot be disassembled, Lead free desiccation resistance brass, Provides pipe support against lateral pipe forces, Features fastest connection 697285500891
Package Weight: 0.72, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/4, Length: 2.98, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Connector, End Style: Push-Fit x FNPT, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285500600
Package Weight: 0.71, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/4, Length: 3.03, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Connector, End Style: Push-Fit x MNPT, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285000865
Package Weight: 0.92, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/2, Length: 3.21, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Connector, End Style: Push-Fit x FNPT, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285500617
Package Weight: 0.89, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 1-1/2, Length: 3.2, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Connector, End Style: Push-Fit x MNPT, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285500648
Package Weight: 1.23, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 2, Length: 3.42, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Connector, End Style: Push-Fit x FNPT, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285500624
Package Weight: 1.2, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, Application: For use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 25 Years Limited, Nominal Size: 2, Length: 3.43, Pressure Rating: 200, Temperature Rating: 20 To 200, Type: Large Diameter, Series: 2XL, Fitting/Connector Type: Connector, End Style: Push-Fit x MNPT, Material: Brass Quick connect: no tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs & rotate clockwise to lock open position, SAFE-recessed release collar: commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released, Extensive range including slip feature on couplings and tee's, Easy installation: unlike the tool intensive connection methods there is no need to send multiple fitters to a job, All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further, Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds, No tools: unlike alterative tool intensive connections systems, SharkBite has no special tooling required for installation, No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal, No waste: should you make an error or simply want to change your installation, no problem for SharkBite, simply remove and re-use, Fittings cannot be disassembled: SharkBite commercial fitting are factory assembled and components cannot be removed, Long pipe engagement: provides pipe support against lateral pipe forces, Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, Suitable for underground installation subject to local code authorities/inspectors, Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation, Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 pex and ASTM D2846/D2846M CPVC water pipe, Chloramine resistant EDPM o-ring, Copper tube liner, 316 stainless steel grab ring, Acetyl copolymer SharkBite cartridge assembly 697285500655
Package Weight: 2.06, Mfg Standards/Approvals: IAPMO IGC 157, Application: Use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 2 Years Limited, Nominal Size: 1-1/4, Pressure Rating: 200, Temperature Rating: 20 to 200, Inlet to Outlet Length: 6.08, Type: Large Diameter, Series: 2XL, End Style: Push-Fit, Port Type: Full, Media: Water, Actuator Type: Lever Handle, Ball Material: 316 Stainless Steel, Body Material: Brass, Softgoods Material: PETF Seat DZR Brass-Lead free alloy body and cap, Mild steel handle, DZR lead free brass spindle 697285001411
Mfg Standards/Approvals: AB1953, ASSE 1061 Section 1V, 4.1, ISO 6509, IAPMO IGC 157, NSF 54/372, Nominal Size: 1-1/2, Pressure Rating: 200, Temperature Rating: 20 to 200, Type: 2XL, End Style: Push-Fit, Body Material: Lead Free DZR Brass 697285500914
Package Weight: 4.45, Mfg Standards/Approvals: IAPMO IGC 157, Application: Use in commercial and residential applications for potable water, hydronic heating, chilled water and general water distribution for irrigation, Warranty: 2 Years Limited, Nominal Size: 2, Pressure Rating: 200, Temperature Rating: 20 to 200, Inlet to Outlet Length: 7.58, Type: Large Diameter, Series: 2XL, End Style: Push-Fit, Port Type: Full, Media: Water, Actuator Type: Lever Handle, Ball Material: 316 Stainless Steel, Body Material: Brass, Softgoods Material: PETF Seat DZR Brass-Lead free alloy body and cap, Mild steel handle, DZR lead free brass spindle 697285001442
Application: Commercial and Residential Applications, Suitable For Use With: Copper, CPVC and PEX Pipe, Specifications: 1-1/4 in Capacity, 200 deg F Temperature, Material: Plastic 697285500945
Application: Commercial and Residential Applications, Suitable For Use With: Copper, CPVC and PEX Pipe, Specifications: 1-1/2 in Capacity, 200 deg F Temperature, Material: Plastic 697285500952
Package Weight: 0.09, Mfg Standards/Approvals: ASSE 1061, Warranty: 2 Years Limited, Type: Quick Disconnect, Specifications: 2 in, Material: Plastic 697285001473
Package Weight: 0.08, Mfg Standards/Approvals: ASSE 1061, Application: For Heating and Plumbing, Warranty: 2 Years Limited, Type: Large Diameter, Specifications: 1-1/4 in, Material: Brass, Dimensions: 1.34 in OD x 1.65 in L DZR brass 697285001480
Package Weight: 0.1, Mfg Standards/Approvals: ASSE 1061, Application: For Heating and Plumbing, Warranty: 2 Years Limited, Type: Large Diameter, Specifications: 1-1/2 in, Material: Brass, Dimensions: 1.59 in OD x 1.89 in L DZR brass 697285001497
Package Weight: 0.15, Mfg Standards/Approvals: ASSE 1061, Application: For Heating and Plumbing, Warranty: 2 Years Limited, Type: Large Diameter, Specifications: 2 in, Material: Brass, Dimensions: 2.09 in OD x 2.09 in L DZR brass 697285001503
Country of Origin: US, Mfg Standards/Approvals: Buy American Act Compliant, Application: T and P Relief Line, Stub-out Support, Sink, Shower, Overhead Pipe Support, Overhead, Misc. single Fixture Stub-out, Mid-span support, Medical gas support, Lavatory, Horizontal, Fixture Stub-out, Bathtub, Acoustic Isolation, To, Material: Steel, Finish: Galvanized, Dimensions: 13 to 15 in L Multi-purpose galvanized steel bracket, Telescoping design supports copper, PEX, CPVC, and many other types of piping, Numerous clamps and fittings integrate onto multiple sides of the Stout Bracket for superior strength and versatility, For use with pipe sizes up to 1 in CTS
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2, Length: 2, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion depth 697285465023
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/8 x 1/2, Length: 2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Reducing Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated, Color: Tan, Dimensions: 1/2 in OD Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465039
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4, Length: 2.36, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion depth 697285465047
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1, Length: 2.72, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.313 in insertion depth 697285465054
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4 x 1/2, Length: 2.2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Reducing Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465061
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1 x 3/4, Length: 2.51, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Reducing Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465078
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2 x 3/4, Length: 1-3/4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Connector, End Style: Push-Fit x FNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution: quality engineered and manufactured, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465085
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2, Length: 1.64, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Connector, End Style: Push-Fit x FNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion depth 697285465108
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4, Length: 1.88, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Connector, End Style: Push-Fit x FNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion depth 697285465115
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1, Length: 2.17, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Connector, End Style: Push-Fit x FNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.313 in insertion depth 697285465139
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2 x 3/4, Length: 1-3/4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Connector, End Style: Push-Fit x MNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution: quality engineered and manufactured, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465146
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2, Length: 1.64, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Connector, End Style: Push-Fit x MNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion depth 697285465160
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4, Length: 1.89, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Connector, End Style: Push-Fit x MNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion depth 697285465177
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1, Length: 2.48, Pressure Rating: 200, Temperature Rating: 200, Type: Straight, Fitting/Connector Type: Connector, End Style: Push-Fit x MNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.313 in insertion depth 697285465191
Mfg Standards/Approvals: CSA B125.3, Warranty: 2 Years Limited, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 150, Inlet to Outlet Length: 2.66, Type: General Purpose, End Style: Push-Fit, Media: Water, Body Material: Brass, Softgoods Material: EPDM O-Ring Instant push-fit connections for increase ease of use-no soldering, clamps, unions or glue required, Designed for vertical and horizontal installation-flexible installation options in new or existing plumbing systems, Acetal cartridge and demount ring, Stainless steel grab ring, Polysulfone tube support liner, Lead free, For use with copper tubing, CTS, CPVC and PEX 697285466166
Mfg Standards/Approvals: CSA B125.3, Warranty: 2 Years Limited, Nominal Size: 3/4, Pressure Rating: 200, Temperature Rating: 150, Inlet to Outlet Length: 3.26, Type: General Purpose, End Style: Push-Fit, Media: Water, Body Material: Brass, Softgoods Material: EPDM O-Ring Instant push-fit connections for increase ease of use-no soldering, clamps, unions or glue required, Designed for vertical and horizontal installation-flexible installation options in new or existing plumbing systems, Acetal cartridge and demount ring, Stainless steel grab ring, Polysulfone tube support liner, Lead free, For use with copper tubing, CTS, CPVC and PEX 697285466173
Mfg Standards/Approvals: ANSI/NSF 372-2010-63, ASSE 1061, CSA B125.3, Warranty: 25 Years Limited, Specifications: 200 psi, 200 deg F, 1/4 X 3/4 in Garden Hose Nut, Material: Brass, Color: Tan Instant push-fit connection for increased ease-of-use, no soldering, clamps, unions, or glue required, Proven durability and quality, Fits copper tubing and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for PEX installations: integrated design means no loose components, ensures secure, reliable connection, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM gasket, Potable water service, 3/4 in pipe x 1/4 in tube, DZR brass 697285000018
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion D 697285465221
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 3/4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion D 697285465245
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 1, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.313 in insertion D 697285465252
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 3/4 x 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465269
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 1 x 3/4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 687752876086
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit x MNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion D 697285465276
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2, Length: 4.46, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated, Dimensions: 1.075 in Dia Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion depth 697285465283
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4, Length: 4.42, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated, Dimensions: 1.355 in Dia Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion depth 697285465290
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1, Length: 4-1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated, Dimensions: 1.64 in Dia Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.313 in insertion depth 697285466227
Mfg Standards/Approvals: ASME A112.18.6-2009/CSA B125.6-200, NSF 372, NSF/ANSI 61, Application: For portable water services, Nominal Size: 3/4 x 3/4, Pressure Rating: 200, Type: Lead Free, End Style: Flex Hose x SharkBite Ball Valve, Softgoods Material: EPDM Washer, Temperature Rating: 200 deg F, Dimensions: 18 in OAL The connectors are EPDM knitted with braided stainless steel, DZR lead free brass nut 697285604612
Mfg Standards/Approvals: ASME A112.18.6-2009, CSA B125.6-200, NSF/ANSI 372-2010, Application: For Commercial and Residential Applications, Warranty: 2 Years Limited, Type: Flexible Braided, Suitable For Use With: OD Controlled Copper, PEX, CPVC and PE-RT Pipe, Specifications: 200 psi Pressure, 200 deg F Temperature, 3/4 in FNPT x 3/4 in SB, Material: Stainless Steel, Dimensions: 18 in L SharkBite connection: eliminates the need for additional transition fittings, Ease of use: No soldering or glue, Available in 12, 15, 18, 24 in lengths: No cutting pipe, Design certified and agency listed: Inspector friendly, peace of mind, Hoses are EPDM knitted with braided stainless steel, DZR lead free brass 3/4 in FIP nut, 3/4 in FIP EPDM washer 697285956569
Mfg Standards/Approvals: ASME A112.18.6-2009, CSA B125.6-200, NSF/ANSI 372-2010, Application: For Commercial and Residential Applications, Warranty: 2 Years Limited, Type: Flexible Braided, Suitable For Use With: OD Controlled Copper, PEX, CPVC and PE-RT Pipe, Specifications: 200 psi Pressure, 200 deg F Temperature, 3/4 in FNPT x 3/4 in SB, Material: Stainless Steel, Dimensions: 24 in L SharkBite connection: eliminates the need for additional transition fittings, Ease of use: No soldering or glue, Available in 12, 15, 18, 24 in lengths: No cutting pipe, Design certified and agency listed: Inspector friendly, peace of mind, Hoses are EPDM knitted with braided stainless steel, DZR lead free brass 3/4 in FIP nut, 3/4 in FIP EPDM washer 697285956575
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit x FNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion D 697285465336
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO/IPC/cUPC/UPC Listed, NSF/ANSI 372-2010/14/61, Warranty: 25 Years Limited, Nominal Size: 1/2, Length: 1.77, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: 90 deg Elbow, End Style: Push-Fit x FNPT, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion D 697285465368
Country of Origin: US, Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061, AWWA C904, cUPC Listed, CSA B125.3/B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 1/4 x 1/2, Length: 1.58, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Connector, End Style: Push-to-Connect x NPS, Material: Brass, Finish: Chrome Plated, Domestic/Import: Domestic Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fitting certified to 200 psi and 200 deg F (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, Integral pipe liner for PEX installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind wall without access panels, Designed for hydronic heating as well as potable water distribution, DZR lead free brass, EPDM o-ring, stainless steel grab ring, polysulfone tube support liner 697285997837
Country of Origin: US, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, cUPC Listed, NSF/ANSI 372/14/61, IPC Listed, UPC Listed, Diameter: 3/8, Length: 1.58, Material: DZR Brass, Domestic/Import: Domestic Instant push-fit connection for increase ease-of use: No soldering, clamps, unions, or glue required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: Connect all three type in any combination, Integral pipe liner for PEX installations: Integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind wall without access panels, Designed for hydronic heating as well as potable water distribution, 200 psi maximum working pressure, 200 deg F maximum temperature, Potable water service, EPDM O-ring, stainless steel grab ring, polysulfone tube support liner, 1/4 x 7/8 in Ballcock thread 697285910799
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2, Length: 2.72, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion depth 697285465405
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4, Length: 3.24, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion depth 697285465436
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1, Length: 3.84, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution: quality engineered and manufactured, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.313 in insertion depth 697285465443
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated, Color: Tan Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion depth 697285969438
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated, Color: Tan Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion depth 697285969445
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4 x 3/4 x 1/2, Length: 3.04, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465450
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1 x 1 x 3/4, Length: 3.63, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465467
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4 x 1/2 x 3/4, Length: 3.08, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465474
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4 x 1/2 x 1/2, Length: 2.92, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe 697285465481
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1/2, Length: 1.08, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Cap, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 0.938 in insertion depth 697285465504
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 3/4, Length: 1.32, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Cap, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.125 in insertion depth 697285465511
Mfg Standards/Approvals: ASSE 1061, CSA B125.3, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372-2010/14/61, UPC Listed, Warranty: 25 Years Limited, Nominal Size: 1, Length: 1.52, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Cap, End Style: Push-Fit, Material: Brass, Finish: Natural Brass/Chrome Plated Instant push-fit connection for increased ease-of-use: no soldering, clamps, unions, or glue required, Fittings certified to 200 psi and 200 deg f (93 deg c): proven durability and quality, Fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, Integral pipe liner for pex installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind!, Compact, robust lead free DZR brass body: Foundation of a strong, corrosion resistant, durable fitting, Design certified to NSF/ANSI 61, NSF/ASNI 14 and ASSE 1061 product standard for used in potable water and hydronic heating water distribution:, Approved to be used underground and behind walls without access panels, Designed for hydronic heating as well as potable water distribution, EPDM o-ring, Stainless steel grab ring, Polysulfone tube support liner, Potable water service, For use with copper, CPVC and pex pipe, 1.313 in insertion depth 697285465528
Application: Use for 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in and 1 in copper and CPVC pipe, Warranty: 1 Year Limited, Blade Material: Plastic, Applicable Materials: Copper, PEX, CPVC or PE-RT Pipe 697285007024
Mfg Standards/Approvals: ASSE 1061, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372/14/61, UPC Listed, Warranty: 2 Years Limited, Specifications: 1/2 in, Material: Plastic 697285910874
Application: For removal and installation of sharkbite fittings and valves, Overall Length: 6-1/2, Overall Width: 2, Tip Material: Stainless Steel 697285007116
Application: For to remove a tube from a SharkBite push-fit fitting, Suitable For Use With: Copper, CPVC and PEX Pipe, Specifications: 3/4 in Capacity, 200 deg F Temperature, Material: Plastic Disassembly is fast and easy using the disconnect clip 697285007123
Application: For removal and installation of sharkbite fittings and valves, Overall Length: 6-1/2, Overall Width: 2, Tip Material: Stainless Steel 697285007130
Mfg Standards/Approvals: ASSE 1061, IAPMO Listed, IPC and cUPC Listed, NSF/ANSI 372/14/61, UPC Listed, Warranty: 2 Years Limited, Specifications: 1 in, Material: Plastic 697285007147
Country of Origin: US, Warranty: 2 Years Limited, Capacity: 1, Overall Length: 6-1/2, Overall Width: 2 697285007154
Country of Origin: US, Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061/NSF 61, AWWA C904, cUPC Listed, CSA B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 1/2, Length: 1.85, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Adapter, End Style: PVC x MNPT, Material: Brass, Finish: Natural, Domestic/Import: Domestic Instant push-fit connection for increased ease-of-use: no soldering, clamps, or unions required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, White collar fits schedule 40, 80, and 120 PVC pipe, and also fits schedule 40 and 80 CVPC: not for use on galvanized iron pipe, Integral tube liner for PEX Installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Easy to disconnect and reusable: remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind wall without access panels: designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR lead free brass body, EPDM o-ring, stainless steel grab ring, veradel tube support liner 697285021006
Country of Origin: US, Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061/NSF 61, AWWA C904, cUPC Listed, CSA B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 3/4, Length: 1.97, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Adapter, End Style: PVC x MNPT, Material: Brass, Finish: Natural, Domestic/Import: Domestic Instant push-fit connection for increased ease-of-use: no soldering, clamps, or unions required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, White collar fits schedule 40, 80, and 120 PVC pipe, and also fits schedule 40 and 80 CVPC: not for use on galvanized iron pipe, Integral tube liner for PEX Installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Easy to disconnect and reusable: remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind wall without access panels: designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR lead free brass body, EPDM o-ring, stainless steel grab ring, veradel tube support liner 697285021235
Country of Origin: US, Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061/NSF 61, AWWA C904, cUPC Listed, CSA B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 1, Length: 2.4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Adapter, End Style: PVC x MNPT, Material: Brass, Finish: Natural, Domestic/Import: Domestic Instant push-fit connection for increased ease-of-use: no soldering, clamps, or unions required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, White collar fits schedule 40, 80, and 120 PVC pipe, and also fits schedule 40 and 80 CVPC: not for use on galvanized iron pipe, Integral tube liner for PEX Installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Easy to disconnect and reusable: remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind wall without access panels: designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR lead free brass body, EPDM o-ring, stainless steel grab ring, veradel tube support liner 697285021280
Country of Origin: CN, Package Length: 8.0, Package Height: 2.706, Package Width: 11.0, Package Weight: 0.866, Package Volume: 238.128, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 61/372, NSF 372, Listed by IAPMO, Application: Plumbing, Warranty: 25 Years, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: PVC, Material: Brass, Dimensions: 1.26 in H x 4.33 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR brass 697285020962
Country of Origin: US, Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061/NSF 61, AWWA C904, cUPC Listed, CSA B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 3/4, Length: 4.49, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: PVC, Material: Brass, Finish: Natural, Domestic/Import: Domestic Instant push-fit connection for increased ease-of-use: no soldering, clamps, or unions required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, White collar fits schedule 40, 80, and 120 PVC pipe, and also fits schedule 40 and 80 CVPC: not for use on galvanized iron pipe, Integral tube liner for PEX Installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Easy to disconnect and reusable: remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind wall without access panels: designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR lead free brass body, EPDM o-ring, stainless steel grab ring, veradel tube support liner 697285021013
Country of Origin: US, Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061/NSF 61, AWWA C904, cUPC Listed, CSA B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 1, Length: 4.45, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: PVC, Material: Brass, Finish: Natural, Domestic/Import: Domestic Instant push-fit connection for increased ease-of-use: no soldering, clamps, or unions required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, White collar fits schedule 40, 80, and 120 PVC pipe, and also fits schedule 40 and 80 CVPC: not for use on galvanized iron pipe, Integral tube liner for PEX Installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Easy to disconnect and reusable: remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind wall without access panels: designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR lead free brass body, EPDM o-ring, stainless steel grab ring, veradel tube support liner 697285021242
Country of Origin: CN, Package Length: 8.0, Package Height: 2.18, Package Width: 11.0, Package Weight: 0.675, Package Volume: 191.84, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 14/61/372, Application: Plumbing, Warranty: 25 Years, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: CTS x CTS x PVC, Material: Brass, Dimensions: 1.97 in H x 2.95 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, Lead free DZR brass 697285020986
Country of Origin: CN, Package Length: 8.0, Package Height: 2.18, Package Width: 11.0, Package Weight: 0.814, Package Volume: 191.84, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 14/61/372, Application: Plumbing, Warranty: 25 Years, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: PVC x CTS x CTS, Material: Brass, Dimensions: 2.09 in H x 3.27 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, Lead free DZR brass 697285020993
Country of Origin: CN, Package Length: 8.0, Package Height: 2.702, Package Width: 11.0, Package Weight: 0.999, Package Volume: 237.776, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 14/61/372, Application: Plumbing, Warranty: 25 Years, Nominal Size: 3/4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: CTS x CTS x PVC, Material: Brass, Dimensions: 2.32 in H x 3.27 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, Lead free DZR brass 697285021211
Country of Origin: CN, Package Length: 8.0, Package Height: 2.702, Package Width: 11.0, Package Weight: 1.131, Package Volume: 237.776, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 14/61/372, Application: Plumbing, Warranty: 25 Years, Nominal Size: 3/4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: PVC x PVC x CTS, Material: Brass, Dimensions: 2.44 in H x 3.58 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, Lead free DZR brass 697285021228
Country of Origin: CN, Package Length: 8.0, Package Height: 3.338, Package Width: 11.0, Package Weight: 1.131, Package Volume: 293.744, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 14/61/372, Application: Plumbing, Warranty: 25 Years, Nominal Size: 1, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: CTS x CTS x PVC, Material: Brass, Dimensions: 2.76 in H x 3.94 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, Lead free DZR brass 697285021266
Country of Origin: CN, Package Length: 8.0, Package Height: 3.338, Package Width: 11.0, Package Weight: 1.865, Package Volume: 293.744, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 14/61/372, Application: Plumbing, Warranty: 25 Years, Nominal Size: 1, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Tee, End Style: PVC x PVC x CTS, Material: Brass, Dimensions: 2.95 in H x 3.94 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, Lead free DZR brass 697285021273
Country of Origin: CN, Package Length: 8.0, Package Height: 2.17, Package Width: 11.0, Package Weight: 0.847, Package Volume: 190.96, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 61/372, NSF 372, Listed by IAPMO, Application: Plumbing, Warranty: 25 Years, Nominal Size: 1/2, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: CTS x PVC, Material: Brass, Dimensions: 1.26 in H x 2.13 in W, Domestic/Import: Import The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Can only be used on copper, CPVC and PVC (schedule 40, 80, and 120) pipe, Instant push-fit connection for increased ease-of-use: No soldering, clamps or unions required, Fittings certified to 200 psi and 200 deg F (93 deg C): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connects all three types in any combination, White collar fits Schedule 40, 80, and 120 PVC pipe, Also fits Schedule 40 and 80 CVPC: Not for use on galvanized iron pipe, Integral tube liner for PEX installations: Integrated design means no loose components, ensures secure, reliable connection, Design certified and agency listed: Inspector friendly, peace of mind, Easy to disconnect and reusable: Remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind walls without access panels: Designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR brass 697285020979
Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061/NSF 61, AWWA C904, cUPC Listed, CSA B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 3/4, Length: 2.4, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: CTS x PVC, Material: Brass, Finish: Natural Instant push-fit connection for increased ease-of-use: no soldering, clamps, or unions required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, White collar fits schedule 40, 80, and 120 PVC pipe, and also fits schedule 40 and 80 CVPC: not for use on galvanized iron pipe, Integral tube liner for PEX Installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Easy to disconnect and reusable: remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind wall without access panels: designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR lead free brass body, EPDM o-ring, stainless steel grab ring, veradel tube support liner
Country of Origin: US, Mfg Standards/Approvals: ASTM F876/F877, ASSE 1061/NSF 61, AWWA C904, cUPC Listed, CSA B137.5, IAPMO Listed, IPC Listed, NSF/ANSI 372, UPC Listed, Warranty: 2 Years Limited, Nominal Size: 1, Length: 2.68, Pressure Rating: 200, Temperature Rating: 200, Fitting/Connector Type: Coupling, End Style: CTS x PVC, Material: Brass, Finish: Natural, Domestic/Import: Domestic Instant push-fit connection for increased ease-of-use: no soldering, clamps, or unions required, Fitting certified to 200 psi and 200 deg F (93 deg c): Proven durability and quality, Tan collar fits copper tubing, and CTS CPVC and PEX: connect all three type in any combination, White collar fits schedule 40, 80, and 120 PVC pipe, and also fits schedule 40 and 80 CVPC: not for use on galvanized iron pipe, Integral tube liner for PEX Installations: integrated design means no loose component, ensures secure, reliable connection, Design certified and agency listed: inspector friendly, peace of mind, Easy to disconnect and reusable: remove pipe, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Approved to be used underground and behind wall without access panels: designed for hydronic heating as well as potable water distribution, No primer or glue required, no waiting for glue to dry means quicker installation time for PVC pipe, DZR lead free brass body, EPDM o-ring, stainless steel grab ring, veradel tube support liner 745332627845
Country of Origin: CN, Package Length: 8.0, Package Height: 2.0, Package Width: 11.0, Package Weight: 0.193, Package Volume: 176.0, Mfg Standards/Approvals: ASSE 1061, CSA B125.3, NSF/ANSI 372/61, Application: For Plumbing, Warranty: 1 Year, Capacity: 1/2, Material: PVC The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in any combination, Instant push-fit connection for increased ease-of-use, Fittings certified to 200 PSI and 200 deg F, Tan collar fits copper tubing, and CTS CPVC and PEX, White collar fits SCH 40, 80, and 120 PVC pipe, also fits SCH 40 and 80 CVPC, Integral tube liner for PEX installations, Design certified to NSF/ANSI 61 and NSF/ASNI 14 product standard for use in potable water and hydronic heating water distribution, Lead free 697285021297
Mfg Standards/Approvals: IAPMO Listed, NSF Approved, Warranty: 1 Year Limited, Type: Push-to-Connect, Material: PVC, Dimensions: 3/4 in Pipe x 7/8 in OD 697285021303
Mfg Standards/Approvals: IAPMO Listed, NSF Approved, Warranty: 1 Year Limited, Type: Push-to-Connect, Material: PVC, Dimensions: 1 in Pipe x 1-1/8 in OD 697285021310