| Includes Cover. For Heavy Wall Rigid And I.M.C. | |||
| Includes Cover. For Heavy Wall Rigid And I.M.C. | |||
| Includes Cover. For Heavy Wall Rigid And I.M.C. | |||
| For conduit service entrance, pipe mounted | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Outside Diameter: 1.163, Inside Diameter: 1.049, Wall: 0.057, Metric Designator: 27, Min Radius (in): 5-3/4, Standard Carton Quantity: 25, Weight per Carton (Lbs): 18, Weight Per 100 (Lbs): 72 | May be used where not subject to severe physical damage, Permitted for exposed and concealed work, Shall be permitted to be installed in concrete, in direct contact with the earth, Permitted in areas of severe corrosive influences where protected by corrosion protection and judged suitable for the condition, Permitted in or under cinder concrete or fill where subject to permanent moisture when protected on all sides by a layer of noncinder concrete not less than 2 in. (50 mm) thick or with corrosion protection judged suitable for the condition, May be used with Aluminum fittings and enclosures when not subject to severe corrosive influences, ANSI - American National Standard of Steel Electrical Metallic Tubing, (EMT) ANSI, C80.3, UL Standard for Electrical Metallic Tubing - Steel, UL797, National Electrical Code 2008 Article 358, Federal Specification WW-C-563 | ||
| Outside Diameter: 1.510, Inside Diameter: 1.380, Wall: 0.065, Metric Designator: 35, Min Radius (in): 7-1/4, Standard Carton Quantity: 20, Weight per Carton (Lbs): 20, Weight Per 100 (Lbs): 100 | May be used where not subject to severe physical damage, Permitted for exposed and concealed work, Shall be permitted to be installed in concrete, in direct contact with the earth, Permitted in areas of severe corrosive influences where protected by corrosion protection and judged suitable for the condition, Permitted in or under cinder concrete or fill where subject to permanent moisture when protected on all sides by a layer of noncinder concrete not less than 2 in. (50 mm) thick or with corrosion protection judged suitable for the condition, May be used with Aluminum fittings and enclosures when not subject to severe corrosive influences, ANSI - American National Standard of Steel Electrical Metallic Tubing, (EMT) ANSI, C80.3, UL Standard for Electrical Metallic Tubing - Steel, UL797, National Electrical Code 2008 Article 358, Federal Specification WW-C-563 | ||
| Outside Diameter: 1.740, Inside Diameter: 1.610, Wall: 0.065, Metric Designator: 41, Min Radius (in): 8-1/4, Standard Carton Quantity: 15, Weight per Carton (Lbs): 22, Weight Per 100 (Lbs): 147 | May be used where not subject to severe physical damage, Permitted for exposed and concealed work, Shall be permitted to be installed in concrete, in direct contact with the earth, Permitted in areas of severe corrosive influences where protected by corrosion protection and judged suitable for the condition, Permitted in or under cinder concrete or fill where subject to permanent moisture when protected on all sides by a layer of noncinder concrete not less than 2 in. (50 mm) thick or with corrosion protection judged suitable for the condition, May be used with Aluminum fittings and enclosures when not subject to severe corrosive influences, ANSI - American National Standard of Steel Electrical Metallic Tubing, (EMT) ANSI, C80.3, UL Standard for Electrical Metallic Tubing - Steel, UL797, National Electrical Code 2008 Article 358, Federal Specification WW-C-563 | ||
| Outside Diameter: 2.197, Inside Diameter: 2.067, Wall: 0.065, Metric Designator: 53, Min Radius (in): 9-1/4, Standard Carton Quantity: 10, Weight per Carton (Lbs): 21, Weight Per 100 (Lbs): 210 | May be used where not subject to severe physical damage, Permitted for exposed and concealed work, Shall be permitted to be installed in concrete, in direct contact with the earth, Permitted in areas of severe corrosive influences where protected by corrosion protection and judged suitable for the condition, Permitted in or under cinder concrete or fill where subject to permanent moisture when protected on all sides by a layer of noncinder concrete not less than 2 in. (50 mm) thick or with corrosion protection judged suitable for the condition, May be used with Aluminum fittings and enclosures when not subject to severe corrosive influences, ANSI - American National Standard of Steel Electrical Metallic Tubing, (EMT) ANSI, C80.3, UL Standard for Electrical Metallic Tubing - Steel, UL797, National Electrical Code 2008 Article 358, Federal Specification WW-C-563 | ||
| Size: 2" x 3/4", Weight (lbs): Steel, Size (in): .970, Package Qty: 2.230 | |||
| No thread for Rigid Conduit Designed for reliability of installation, ground continuity and for resistance to weather & environmental conditions. | |||
| No thread for Rigid Conduit Designed for reliability of installation, ground continuity and for resistance to weather & environmental conditions. | |||
| No thread for Rigid Conduit Designed for reliability of installation, ground continuity and for resistance to weather & environmental conditions. | |||
| No thread for Rigid Conduit Designed for reliability of installation, ground continuity and for resistance to weather & environmental conditions. | |||
| No thread for Rigid Conduit Designed for reliability of installation, ground continuity and for resistance to weather & environmental conditions. | |||
| No thread for Rigid Conduit Designed for reliability of installation, ground continuity and for resistance to weather & environmental conditions. | |||
| No thread. With permanent center stop for equal conduit alignment. | |||
| No thread. With permanent center stop for equal conduit alignment. | |||
| No thread. With permanent center stop for equal conduit alignment. | |||
| No thread. With permanent center stop for equal conduit alignment. | |||
| No thread. With permanent center stop for equal conduit alignment. | |||
| No thread. With permanent center stop for equal conduit alignment. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Flexible Galvanized Steel Core Surrounded By A Polyvinyl Gray Jacket. | |||
| Copper free die-cast aluminum. Fittings, covers & gaskets are interchangeable with some other makes. | |||
| Copper free die-cast aluminum. Fittings, covers & gaskets are interchangeable with some other makes. | |||
| Copper free die-cast aluminum. Fittings, covers & gaskets are interchangeable with some other makes. | |||
| Copper free die-cast aluminum. Fittings, covers & gaskets are interchangeable with some other makes. | |||
| Copper free die-cast aluminum. Fittings, covers & gaskets are interchangeable with some other makes. | |||
| Copper free die-cast aluminum. Fittings, covers & gaskets are interchangeable with some other makes. | |||
| Trade Size: 2", Standard Carton Quantity: 10, Weight per Carton (Lbs): 67, Weight Per 100 (Lbs): 670, Weight Each (lbs): 22, Min UL Radius (in): 9-1/2 | |||
| Trade Size: 3", Standard Carton Quantity: 35, Weight per Carton (Lbs): 665, Weight Per 100 (Lbs): 1900, Weight Each (lbs): 45, Min UL Radius (in): 13 | |||
| Trade Size: 4", Standard Carton Quantity: 25, Weight per Carton (Lbs): 775, Weight Per 100 (Lbs): 3100, Weight Each (lbs): 64, Min UL Radius (in): 16 | |||
| Trade Size: 2", Standard Carton Quantity: 10, Weight per Carton (Lbs): 67, Weight Per 100 (Lbs): 670, Weight Each (lbs): 11, Min UL Radius (in): 9-1/2 | |||
| Trade Size: 3", Standard Carton Quantity: 35, Weight per Carton (Lbs): 665, Weight Per 100 (Lbs): 1900, Weight Each (lbs): 37, Min UL Radius (in): 13 | |||
| Type: Short, Size: 10" | |||
| Weight: Squeeze, Standard Packaging: 2-1/2", Unit Qty: 2.06, Wt Lbs Per 100: 2.70-2.95, Unit Packaging: 0.94, Trade Size: 2 | |||
| Weight: Squeeze, Standard Packaging: 2-1/2", Unit Qty: 6.250, Wt Lbs Per 100: 2.75-3.00, Unit Packaging: 0.880, Trade Size: 4 | |||
| Weight: Squeeze, Standard Packaging: 3", Unit Qty: 2.25, Wt Lbs Per 100: 3.13-3.50, Unit Packaging: 0.94, Trade Size: 2 | |||
| Weight: Squeeze, Standard Packaging: 3", Unit Qty: 7.250, Wt Lbs Per 100: 3.25-3.50, Unit Packaging: 1.000, Trade Size: 4 | |||
| Trade Size: 4", Standard Carton Quantity: 25, Weight per Carton (Lbs): 775, Weight Per 100 (Lbs): 3100, Weight Each (lbs): 54, Min UL Radius (in): 16 | |||
| Unit Qty: Zinc Plated, Wt Lbs Per 100: 3" | Liquid Tight, Rain Tight, Oil Tight, Standard Material:, Malleable Iron / Steel Ferrule / Steel Locknut | ||
| Unit Qty: Malleable Iron, Wt Lbs Per 100: Zinc Plated, Unit Packaging: 3" | Liquid tight, Rain tight, Oil tight, Suitable for wet locations, Tapered threaded male hub NPT, Insulated throat protects conductors from insulation damage, Compact slim diameter with small turning radius, Zinc Electro plated for excellent durability, Standard Material: Malleable Iron/Steel Ferrule/Steel Locknut, Standard Finish: Zinc Plated, Application, To secure, ground and seal Liquid tight conduit to a box or enclosure | ||
| Trade Size: 3", Standard Carton Quantity: 35, Weight per Carton (Lbs): 665, Weight Per 100 (Lbs): 1900, Weight Each (lbs): 57, Min UL Radius (in): 9-1/2 | |||
| Trade Size: 4", Standard Carton Quantity: 25, Weight per Carton (Lbs): 775, Weight Per 100 (Lbs): 3100, Weight Each (lbs): 81, Min UL Radius (in): 13 | |||
| Weight (lbs): 5.375, D: 5.625, Trade Size: 6.125 | |||
| Weight (lbs): 4.75, Trade Size: 6.25 | For PVC to metal threaded connections. Male threads, one end: Solvent-Weld socket other end. | ||
| Size: 5", Finish: 5.488-5.500, Thread: Steel, Thickness: 6.67, Threads Per Inch: 8, Channel: 0.900 | |||
| Unit Qty: 2.06, Wt Lbs Per 100: 0.53, Unit Packaging: 3/4" |
