Loading ...

Loading ...

Search in: BARD MANUFACTURING COMPANY INC

Product Image Not AvailableGV27S1-AN 2-TON 2STAGE UPFLOW GEO THERMAL UNIT
Locke Part #: L5500MFG Part #: GV27S1-AN Compare
L5501.jpgGV38S1-AN 3-TON 2STAGE UPFLOW GEOTHERMAL UNIT
Locke Part #: L5501MFG Part #: GV38S1-AN Compare
Capacity: 3 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 26, Rated Load Amps 230/208: 12.4/14.5, Lock Rotor Amps 230/208: 82/82, Hp/ Speed/ Type: 1/2 / 5 / ECM, Motor Amps: 2.5 / 2.95, Air Filters 2" Pleated MERV 6: 20 x 25 x 2 (1), Shipping Weight Lbs.: 345 Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197
L5501.jpgGV51S1-AN 4TON 2STAGE UPFLOW GEOTHERMAL UNIT
Locke Part #: L5502MFG Part #: GV51S1-AN Compare
Capacity: 4 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 32, Rated Load Amps 230/208: 17.4/20.6, Lock Rotor Amps 230/208: 96/96, Hp/ Speed/ Type: 1/2 / 5 / ECM, Motor Amps: 2.8 / 3.0, Air Filters 2" Pleated MERV 6: 16 x 25 x 2 (2), Shipping Weight Lbs.: 390 Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197
L5501.jpgGV61S2-AN 5TON 2STAGE UPFLOW GEOTHERMAL UNIT
Locke Part #: L5503MFG Part #: GV61S2AAN Compare
Capacity: 5 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 38, Rated Load Amps 230/208: 22.4/27.4, Lock Rotor Amps 230/208: 118/118, Hp/ Speed/ Type: 3/4 / 5 / ECM, Motor Amps: 3.8 / 4.1, Air Filters 2" Pleated MERV 6: 16 x 25 x 2 (2), Shipping Weight Lbs.: 440 Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197
L5501.jpgGV71-S1-AN 6TON 2STAGE UPFLOW GEOTHERMAL UNIT
Locke Part #: L5504MFG Part #: GV71S1-AN Compare
Capacity: 6 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 41, Rated Load Amps 230/208: 24.7/28.5, Lock Rotor Amps 230/208: 150/150, Hp/ Speed/ Type: 3/4 / 5 / ECM, Motor Amps: 4.1 / 4.2, Air Filters 2" Pleated MERV 6: 16 x 25 x 2 (2), Shipping Weight Lbs.: 450 Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197
115v-60hz-1ph 6'Cord With 115v Grounded Plug, 5/8" OD Copper Water Line Connections, Can Be Mounted On Heat Pump Cabinet Or Adjacent Wall
Product Image Not AvailableLoop Flow Center Kit
Locke Part #: L5508MFG Part #: DORLFCK-1 Compare
Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 1.0 Ton, EER: 10, Cooling Capacity BTUH: 12000, Minimum Circuit Ampacity: 27, Maximum External Fuse or Circuit Breaker: 30, Field Power Wire Size: 10, Ground Wire: 10, Heat Strip: 5.0 KW, Compressor RLA: 4.8/5.2, Compressor LRA: 26, Outdoor Fan Motor (HP-RPM-SP): 1/12-1075-1, Outdoor Fan Motor (FLA): 0.70, Indoor Blower Motor (HP-RPM-SP): 1/8-1650-1, Indoor Blower Motor (FLA): 0.70, CFM / ESP (Rated-WET Coil): 400/0.20
L5514.jpg3 Ton 10 kW Wall Mount Heat Unit
Locke Part #: L5514MFG Part #: W36A2-A10XXXXXE Compare
Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.
L5514.jpg3 Ton 15kW Wall Mount Heat Unit
Locke Part #: L5515MFG Part #: W36A2-A15XXXXXE Compare
Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.
L5514.jpg4 Ton 15kW Wall Mount Heat Unit
Locke Part #: L5516MFG Part #: W48A1-A15XXXXXE Compare
Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.
L5514.jpg4 Ton 20kW Wall Mount Heat Unit
Locke Part #: L5517MFG Part #: W48A2-A20XXXXXE Compare
Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.
L5514.jpg5 Ton 20kW Wall Mount Heat Unit
Locke Part #: L5518MFG Part #: W60A2-A20XXXXXE Compare
Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.
L5514.jpg6 Ton 20kW Wall Mount Heat Unit
Locke Part #: L5519MFG Part #: W70A2-A20XXXXXE Compare
Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.
Product Image Not Available1/4" FPT Gauge Adapter W/ 1/8" Heavy Duty Probe
Locke Part #: L5523MFG Part #: 8603-027 Compare
8603-017.jpgFlow Meter, 1-17 GPM, 1" FPT
Locke Part #: L5524MFG Part #: 8603-017 Compare
Product Image Not AvailableDouble O-Ring Straight Fitting
Locke Part #: L5543MFG Part #: DORB1-S-4HC Compare
Product Image Not AvailableDouble O-Ring 90° Fitting
Locke Part #: L5544MFG Part #: DORB1-90-4HC Compare
W17A1-A08XXXXXJ.jpgWall Mount 1.5 Ton Air Conditioner, 230/208/60/1 V, 9.20 EER
Locke Part #: L5547MFG Part #: W17A1-A08XXXXXJ Compare
Color: Beige, Width: 33.300", Depth: 17.125", Height: 70.563", Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 1.5 Ton, EER: 9.20, Cooling Capacity BTUH: 16400, Minimum Circuit Ampacity: 46, Maximum External Fuse or Circuit Breaker: 50, Field Power Wire Size: 8, Ground Wire: 10, Filter Options: 1" Throwaway
W17A1-A08XXXXXJ.jpgWall Mount 2.0 Ton Air Conditioner, 230/208/60/1 V, 9.00 EER
Locke Part #: L5548MFG Part #: W24A1-A08XXXXXE Compare
Color: Beige, Width: 33.300", Depth: 17.125", Height: 70.563", Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 2.0 Ton, EER: 9.0, Cooling Capacity BTUH: 24000, Minimum Circuit Ampacity: 46, Maximum External Fuse or Circuit Breaker: 50, Field Power Wire Size: 8, Ground Wire: 10, Filter Options: 1" Throwaway
W17A1-A08XXXXXJ.jpgWall Mount 2.5 Ton Air Conditioner, 230/208/60/1 V, 9.00 EER
Locke Part #: L5549MFG Part #: W30A1-A10XXXXXE Compare
Color: Beige, Width: 38.200", Depth: 17.125", Height: 70.563", Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 2.5 Ton, EER: 9.0, Cooling Capacity BTUH: 29600, Minimum Circuit Ampacity: 58, Maximum External Fuse or Circuit Breaker: 60, Field Power Wire Size: 6, Ground Wire: 10, Filter Options: 1" Throwaway
L7502.jpg3 Ton “A” Coil Section
Locke Part #: L7502MFG Part #: GTA3600UD1-AA Compare
3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump
L7502.jpg4 - 5 Ton “A” Coil Section
Locke Part #: L7503MFG Part #: GTA4860UD1AA Compare
3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump
L7502.jpg3 - 5 Ton Blower Section
Locke Part #: L7504MFG Part #: GTB1-A Compare
3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump
L7502.jpg3 Ton "C" Compressor Section
Locke Part #: L7505MFG Part #: GTC36S2-ADNX Compare
3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump
L7502.jpg4 Ton "C" Compressor Section
Locke Part #: L7506MFG Part #: GTC48S2-ADNX Compare
3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump
L7502.jpg5 Ton "C" Compressor Section
Locke Part #: L7507MFG Part #: GTC60S1-ADNX Compare
3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump
Product Image Not Available14.7 Kw 240 Volt Heat Strip for 4 - 5 Ton
Locke Part #: L7508MFG Part #: 8604-082 Compare
Product Image Not Available19.2 Kw 240 Volt Heat Strip for 4 - 5 Ton
Locke Part #: L7509MFG Part #: 8604-083 Compare
L7502.jpg3’ Line Set with Fittings - 3/8" & 7/8" Line Size
Locke Part #: L7510MFG Part #: GTLS-03-1 Compare
3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump
Dimensions: 28" x 8", Outside Dimensions: 32-1/4" x 12-1/4", Flange Type: 2" Wide Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position.
Product Image Not AvailableSupply Register for W-Series 42-70
Locke Part #: L7516MFG Part #: SG-5W Compare
Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position.
Product Image Not AvailableReturn Air Grille for W-Series 30-36
Locke Part #: L7517MFG Part #: RG-3W Compare
Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position.
Product Image Not AvailableReturn Air Grille for W-Series 42-70
Locke Part #: L7518MFG Part #: RG-5W Compare
Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position.
Product Image Not AvailableReturn Filter Grille for W-Series 30-36
Locke Part #: L7519MFG Part #: RGF-3W Compare
Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position.
Product Image Not AvailableReturn Filter Grille for W-Series 42-70
Locke Part #: L7520MFG Part #: RGF-5W Compare
Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position.