Loading ...

Loading ...

Search in: Watts Regulator

D300.jpg 7" Countertop Faucet
Locke Part #: D0300MFG Part #: 7100195
7" spout, vertical swivel neck, stainless steel countertop faucet.
E0011.jpg Sediment Cartridge
Locke Part #: E0011MFG Part #: 7100357
E0013.jpg Taste and Odor Cartridge
Locke Part #: E0013MFG Part #: 7100446
E0015.jpg Multi-purpose Water Filter Housing
Locke Part #: E0015MFG Part #: 7100275
" overall length. Cartridges,, not included
E0016.jpg Filter Housing Wrench for E0015
Locke Part #: E0016MFG Part #: 7100298
IC6.jpg 1/4" NPT Icemaker Water Filter
Locke Part #: E0024MFG Part #: 7100454
For ice makers, coffee makers and tea makers. Filters out dirt, rust, scale, and removes taste and odor-causing contaminants. Produces clean, fresh water.
E0048.jpg 1/2" FIP Anti-Scald
Locke Part #: E0048MFG Part #: 0559116
E0048.jpg 3/4" FIP Anti-Scald
Locke Part #: E0049MFG Part #: 0559119
E0050.jpg 1/2" Tempering Valve
Locke Part #: E0050MFG Part #: 0559132
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
E0050.jpg 3/4" Tempering Valve
Locke Part #: E0051MFG Part #: 0559136
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
E0083.jpg 3/4" Vacuum relief
Locke Part #: E0083MFG Part #: 0556031
Pressure-Temperature, Maximum Temperature: 212 degrees F (100 degrees C), Maximum Working Pressure: 100 psi (6.9 bars), Adjustment, Range, : 10-25 psi (68.7 - 172.4 kPa) set at 15 psi (103.4 kPa)
E0015.jpg Mounting Bracket for Water Filter E0015
Locke Part #: E0450MFG Part #: 7100463
" overall length. Cartridges,, not included
Weight: 1.0 lbs, Standard Setting: 210°F, Connection - Tank: 3/4" Male, Connection - Gas: 1/2" Female, Natural Gas: 150,000, LP Gas: 243,000, BTU/HR Ratings MFG and LP Gas Air Mixture: 77,400, Mixed Gas: 125,750
7300398.jpg O-Ring for Full Flow Housing
Locke Part #: E1114MFG Part #: 7300398
Industrial-strength plastic filter housings with clear bowls. "B" models feature a pressure-release button for easy cartridge changing. NSF approved. 1" connections. 12-1/, " overall length.
E1115.jpg Mounting Bracket For E1115 1PS-B1H
Locke Part #: E1116MFG Part #: 7100466
Industrial-strength plastic filter housings with clear bowls. "B" models feature a pressure-release button for easy cartridge changing. NSF approved. 1" connections. 12-1/, " overall length.
E0016.jpg Filter Housing Wrench for E1115
Locke Part #: E1117MFG Part #: 7100299
Industrial-strength plastic filter housings with clear bowls. "B" models feature a pressure-release button for easy cartridge changing. NSF approved. 1" connections. 12-1/, " overall length.
Industrial-strength plastic filter housings with clear bowls. "B" models feature a pressure-release button for easy cartridge changing. NSF approved. 1" connections. 12-1/, " overall length.
E1146.jpg 1-1/4” Threaded isolation Flange
Locke Part #: E1146MFG Part #: 0068092
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG.
Size: 1-1/2", Weight: 2.5 lbs, Maximum Working Pressure: 600psi (41.4 bar) WOG, End Connection: 1/4 NPT Threaded, Maximum Temperature: 406°F (208°C) at 100psi (6.9 bar)
E1146.jpg 1-1/2” Sweat isolation Flange
Locke Part #: E1148MFG Part #: 0068098
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG.
E1146.jpg 1-1/4” Sweat isolation Flange
Locke Part #: E1149MFG Part #: 0068097
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG.
E1146.jpg 3/4” Threaded isolation Flange
Locke Part #: E1153MFG Part #: 0068090
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG.
E1146.jpg 1” Threaded isolation Flange
Locke Part #: E1154MFG Part #: 0068091
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG.
E1146.jpg 3/4" Sweat isolation Flange
Locke Part #: E1155MFG Part #: 0068095
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG.
E1146.jpg 1” Sweat isolation Flange
Locke Part #: E1156MFG Part #: 0068096
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG.
M0546.jpg 3/4" Water Press. Reduc. Valve
Locke Part #: M0546MFG Part #: 0009478
Set at 45 lb. Reduces water pressure in service lines.
M0546.jpg 1" Water Press. Reduc. Valve
Locke Part #: M0548MFG Part #: 0009490
Set at 45 lb. Reduces water pressure in service lines.
M0998.jpg 1/4" - 1/2" 009, 3/4" 009 M2
Locke Part #: M0998MFG Part #: 0881399
M0999.jpg 1" Reduced Pressure Backflow Preventer
Locke Part #: M1001MFG Part #: 0065373
M0999.jpg 2" Reduced Pressure Backflow Preventer
Locke Part #: M1004MFG Part #: 0065376
Size: 1", Weight: 4.8 lbs, Body: Lead Free cast copper silicon alloy, Maximum Working Pressure: 150psi (10.3 bar), End Connection: Female NPT, Temperature Range: 33°F – 180°F (0.5°C – 83°C), Springs: Stainless steel, Bonnet: PPO, Vent Disc: EPDM, Disc Holder: PPO, Check Disc: Silicone rubber
Size: 1/2", Weight: 4.5 lbs, Maximum Working Pressure: 175psi (12.1 bar)., Temperature Range: 33°F – 180°F (0.5°C – 82°C).
M0999.jpg SS009-M3QT 3/4" RPZ STAINLESS STEEL
Locke Part #: M1007MFG Part #: 0062968
Size: 1/2"
M0999.jpg SS009M3QT 1" RPZ STAINLESS STEEL
Locke Part #: M1008MFG Part #: 0062962
Size: 3/4"
M0999.jpg SS009M3QT 1/2" BACKFLOW S/S
Locke Part #: M1009MFG Part #: 0062967
Size: 1"
M1010.jpg 3/4" Double Check
Locke Part #: M1010MFG Part #: 0063231
M1010.jpg 1" Double Check
Locke Part #: M1011MFG Part #: 0063232
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
M1015.jpg 3/4" Pressure Breaker
Locke Part #: M1015MFG Part #: 0792011
M1015.jpg 1" Pressure Breaker
Locke Part #: M1016MFG Part #: 0792012
M1017.jpg Float Vent Kit for 800M4 QT 1" Valve
Locke Part #: M1018MFG Part #: 0887710
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
M1022.jpg #7 - 3/4" Dual Check Backflow Preventer
Locke Part #: M1022MFG Part #: 0072204
M1022.jpg #7 - 1" Dual Check Backflow Preventer
Locke Part #: M1023MFG Part #: 0072205
M1015.jpg 1-1/4" Pressure Breaker
Locke Part #: M1024MFG Part #: 0792013
M1025.jpg 1-1/4" Water Press. Reduc. Valve
Locke Part #: M1025MFG Part #: 0009392
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1025.jpg 1-1/2" Water Press. Reduc. Valve
Locke Part #: M1026MFG Part #: 0009431
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1025.jpg 2" Water Press. Reduc. Valve
Locke Part #: M1027MFG Part #: 0009465
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1015.jpg 1-1/2" Pressure Breaker
Locke Part #: M1028MFG Part #: 0792014
M1015.jpg 2" Pressure Breaker
Locke Part #: M1029MFG Part #: 0792015
M1030.jpg 1/2" Wye Strainer Kit with Nipple
Locke Part #: M1030MFG Part #: 0379111
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M1030.jpg 3/4" Wye Strainer Kit with Nipple
Locke Part #: M1031MFG Part #: 0379112
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M1030.jpg 1" Wye Strainer Kit with Nipple
Locke Part #: M1032MFG Part #: 0379113
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M1030.jpg 1-1/4" Wye Strainer Kit with Nipple
Locke Part #: M1033MFG Part #: 0379114
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M1030.jpg 1-1/2" Wye Strainer Kit with Nipple
Locke Part #: M1034MFG Part #: 0379115 LF777SI
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M1030.jpg 2" Wye Strainer Kit with Nipple
Locke Part #: M1035MFG Part #: 0379116
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M1120.jpg 1/2" Reduced Pressure Backflow Preventer
Locke Part #: M1120MFG Part #: 0792024 LF008PCQT
M1131.jpg Thermostatic Mixing Valve
Locke Part #: M1131MFG Part #: 0204143
Maximum Pressure:, 150psi, Accurate within +/-3 F, Temperature Range:, 80 F to 120 F. ASSE 1016 listed.
M0999.jpg 3/4" Total rubber parts kit for M1000
Locke Part #: M1132MFG Part #: 0887787
M1276.jpg 2" Double Check Valve Assembly
Locke Part #: M1276MFG Part #: 0063235
M1278.jpg 1-1/4"-2" Air Gap
Locke Part #: M1278MFG Part #: 0881378
Size: 3/4", Weight: 3.5 lbs, Body: Lead Free copper silicon alloy, Maximum Working Pressure: 300psi (20.7 bar), Temperature Range: 33°F – 160°F (0.5°C – 71°C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM with PTFE wetted surface, Valve Disc: EPDM, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa), High Pressure Range: 75–125psi
Size: 1", Weight: 6.5 lbs, Body: Lead Free copper silicon alloy, Maximum Working Pressure: 300psi (20.7 bar), Temperature Range: 33°F – 160°F (0.5°C – 71°C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM with PTFE wetted surface, Valve Disc: EPDM, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
Size: 3/4", Weight: 2 lbs, Body: Bronze, Maximum Working Pressure: 400psi (27.6 bar), Temperature Range: 33˚F – 180˚F (0.5˚C – 82˚C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM, Valve Disc: Elastomer, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
Size: 1", Weight: 3 lbs, Body: Bronze, Maximum Working Pressure: 400psi (27.6 bar), Temperature Range: 33˚F – 180˚F (0.5˚C – 82˚C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM, Valve Disc: Elastomer, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)