Loading ...

Loading ...

Search in: ARMSTRONG AIR

Product Image Not Available ECB25-5-P 5KW HT STRP BCE3 89W43
Locke Part #: L3920MFG Part #: 12R60
Heat: 5 KW
Heat: 7.5 KW
Product Image Not Available ECB25-10-P 10KW HT STRP BCE3 89W47
Locke Part #: L3922MFG Part #: 12S59
Heat: 10 KW
Heat: 10 KW
Heat: 15 KW
Heat: 20 KW
Product Image Not Available COMFORT SYNC ZONE CONTROL
Locke Part #: L3976MFG Part #: 1.851399
Product Image Not Available COMFORT SYNC IN-ZONE SENSOR
Locke Part #: L3977MFG Part #: 1.851400
L4090.jpg Comfort Sync Thermostat
Locke Part #: L4090MFG Part #: 1.841197
Remote Access:, Allows you to check and adjust your home s temperature from anywhere using your laptop, smartphone, tablet or other web enabled device., Simple Scheduling:, Helps you save energy with easy, intuitive heating and cooling schedules created around your lifestyle., One-Touch Away Mode:, Puts your system into an enhanced energy saving mode when you leave., Alerts and Reminders:, When Comfort Sync detects that repairs and regular maintenance are needed, it alerts you or your dealer instantly via email., Weather Data:, Using its connection to your wireless network, Comfort Sync can display a five day forecast and live weather alerts., Touchscreen Operation:, The bright, high-definition touchscreen uses simple menus and icons to make even complex operations incredibly easy., Customizable Skins:, Available in many colors and patterns, they allow Comfort Sync to blend seamlessly into any d cor, so it s as fashionable as it is functional.
L4090.jpg Outdoor Sensor for Comfort Sync
Locke Part #: L4091MFG Part #: X2658
Remote Access:, Allows you to check and adjust your home s temperature from anywhere using your laptop, smartphone, tablet or other web enabled device., Simple Scheduling:, Helps you save energy with easy, intuitive heating and cooling schedules created around your lifestyle., One-Touch Away Mode:, Puts your system into an enhanced energy saving mode when you leave., Alerts and Reminders:, When Comfort Sync detects that repairs and regular maintenance are needed, it alerts you or your dealer instantly via email., Weather Data:, Using its connection to your wireless network, Comfort Sync can display a five day forecast and live weather alerts., Touchscreen Operation:, The bright, high-definition touchscreen uses simple menus and icons to make even complex operations incredibly easy., Customizable Skins:, Available in many colors and patterns, they allow Comfort Sync to blend seamlessly into any d cor, so it s as fashionable as it is functional.
Product Image Not Available Expansion Valve for 2 to 3 ton AC Units
Locke Part #: L4243MFG Part #: 1.851354
Product Image Not Available Expansion Valve
Locke Part #: L4245MFG Part #: 1.851356
Product Image Not Available Expansion Valve
Locke Part #: L4246MFG Part #: 1.851357
Product Image Not Available Expansion Valve
Locke Part #: L4247MFG Part #: 1.851358
Product Image Not Available Fossil Fuel Kit
Locke Part #: L4248MFG Part #: 1.841185
Product Image Not Available LP Conversion Kit for 80-90%
Locke Part #: L4286MFG Part #: 1.831009
Product Image Not Available LP Conversion Kit for G2D93 Models
Locke Part #: L4289MFG Part #: 1.831024
Product Image Not Available Expansion Valve
Locke Part #: L4290MFG Part #: 1.851361
Product Image Not Available Expansion Valve
Locke Part #: L4291MFG Part #: 1.851362
Product Image Not Available Expansion Valve
Locke Part #: L4292MFG Part #: 1.851363
Product Image Not Available Expansion Valve
Locke Part #: L4293MFG Part #: 1.851364
Product Image Not Available Expansion Valve
Locke Part #: L4294MFG Part #: 1.851365
Product Image Not Available LP Conversion Kit for All G1D93 Models
Locke Part #: L4316MFG Part #: 1.831022
Volts: 208/230, Nominal Tonnage: 3, Liquid Line O.D. (Sweat): 3/8", Suction/Vapor Line O.D. (Sweat): 3/4", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Filter Number and Size - Inches: 20 x 22 Application, Environmentally friendly R410A refrigerant, 3, 4, and 5 ton nominal capacities, Multi-position applications, One piece design for easy installation but may be disassembled into two separate sections for ease of installation in tight applications, Optional field installed electric heat kits, 10, 15 and 20kW, Heat pump and air conditioner applications, Cabinet, Foil faced insulation, Painted, heavy-gauge galvanized cabinet, Tool-less access to filter area for quick and easy servicing. Disposable frame type filter furnished and factory installed in rails in cabinet, High-strength, UV and heat-resistant plastic drain pan for corrosion resistance have dual pipe drains, Serviceable easy slide out blower assembly, No external screw heads on sides of cabinet for tight installations preventing damage to walls or woodwork, Removable panels provide complete service access, Electrical inlets provided in sides and top of cabinet, Components, Efficient multi-speed PSC blower motors, Standard transformer and blower relay, Built-in indoor time delay for increases efficiency, Sleeves on distributor tubing to protect tubing, Drain pan designed for up-flow, down-flow or horizontal applications. Deep, corrosion resistant plastic drain pans have dual pipe drains, Factory installed R410A TXV, Accessories, Counterflow kit, Combustible floor kit, Single point power kit, Electric heat kits Warranty, 1 year parts warranty. See limited warranty document for details
Volts: 208/230, Nominal Tonnage: 4, Liquid Line O.D. (Sweat): 3/8", Suction/Vapor Line O.D. (Sweat): 7/8", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Filter Number and Size - Inches: 20 x 24 Application, Environmentally friendly R410A refrigerant, 3, 4, and 5 ton nominal capacities, Multi-position applications, One piece design for easy installation but may be disassembled into two separate sections for ease of installation in tight applications, Optional field installed electric heat kits, 10, 15 and 20kW, Heat pump and air conditioner applications, Cabinet, Foil faced insulation, Painted, heavy-gauge galvanized cabinet, Tool-less access to filter area for quick and easy servicing. Disposable frame type filter furnished and factory installed in rails in cabinet, High-strength, UV and heat-resistant plastic drain pan for corrosion resistance have dual pipe drains, Serviceable easy slide out blower assembly, No external screw heads on sides of cabinet for tight installations preventing damage to walls or woodwork, Removable panels provide complete service access, Electrical inlets provided in sides and top of cabinet, Components, Efficient multi-speed PSC blower motors, Standard transformer and blower relay, Built-in indoor time delay for increases efficiency, Sleeves on distributor tubing to protect tubing, Drain pan designed for up-flow, down-flow or horizontal applications. Deep, corrosion resistant plastic drain pans have dual pipe drains, Factory installed R410A TXV, Accessories, Counterflow kit, Combustible floor kit, Single point power kit, Electric heat kits Warranty, 1 year parts warranty. See limited warranty document for details
Volts: 208/230, Nominal Tonnage: 5, Liquid Line O.D. (Sweat): 3/8", Suction/Vapor Line O.D. (Sweat): 1-1/8", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Filter Number and Size - Inches: 20 x 24 Application, Environmentally friendly R410A refrigerant, 3, 4, and 5 ton nominal capacities, Multi-position applications, One piece design for easy installation but may be disassembled into two separate sections for ease of installation in tight applications, Optional field installed electric heat kits, 10, 15 and 20kW, Heat pump and air conditioner applications, Cabinet, Foil faced insulation, Painted, heavy-gauge galvanized cabinet, Tool-less access to filter area for quick and easy servicing. Disposable frame type filter furnished and factory installed in rails in cabinet, High-strength, UV and heat-resistant plastic drain pan for corrosion resistance have dual pipe drains, Serviceable easy slide out blower assembly, No external screw heads on sides of cabinet for tight installations preventing damage to walls or woodwork, Removable panels provide complete service access, Electrical inlets provided in sides and top of cabinet, Components, Efficient multi-speed PSC blower motors, Standard transformer and blower relay, Built-in indoor time delay for increases efficiency, Sleeves on distributor tubing to protect tubing, Drain pan designed for up-flow, down-flow or horizontal applications. Deep, corrosion resistant plastic drain pans have dual pipe drains, Factory installed R410A TXV, Accessories, Counterflow kit, Combustible floor kit, Single point power kit, Electric heat kits Warranty, 1 year parts warranty. See limited warranty document for details
Product Image Not Available ECB29-15CB-4Y 15 KW HEAT STRIP 3PH
Locke Part #: L4464MFG Part #: 12L63
KW: 15, Volt: 230
Product Image Not Available ECB29-20CBY 20 KW HEAT STRIP 3PH
Locke Part #: L4465MFG Part #: 12L64
KW: 20, Volt: 230
Product Image Not Available 0 - 25" Manual Outside Air Damper
Locke Part #: L4822MFG Part #: 1.851274
L5340.jpg EM1P23BG MULTIPOS COIL- CASED
Locke Part #: L5340MFG Part #: 1.912109
Orifice: .062, A (In.): 17-1/2, B (In.): 25-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P24AG MULTIPOS COIL- CASED
Locke Part #: L5341MFG Part #: 1.912060
Orifice: .064, A (In.): 14-1/2, B (In.): 25-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P24BG MULTIPOS COIL- CASED
Locke Part #: L5342MFG Part #: 1.912061
Orifice: .064, A (In.): 17-1/2, B (In.): 25-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P29AG MULTIPOS COIL- CASED
Locke Part #: L5343MFG Part #: 1.912111
Orifice: .070, A (In.): 14-1/2, B (In.): 25-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P29BG MULTIPOS COIL- CASED
Locke Part #: L5344MFG Part #: 1.912113
Orifice: .070, A (In.): 17-1/2, B (In.): 25-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 11, F (In.): 11, G (In.): 11 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P30AG MULTIPOS COIL- CASED
Locke Part #: L5345MFG Part #: 1.912062
Orifice: .070, A (In.): 14-1/2, B (In.): 25-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P30BG MULTIPOS COIL- CASED
Locke Part #: L5346MFG Part #: 1.912063
Orifice: .070, A (In.): 17-1/2, B (In.): 25-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P36AG MULTIPOS COIL- CASED
Locke Part #: L5347MFG Part #: 1.912064
Orifice: .076, A (In.): 14-1/2, B (In.): 25-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P36BG MULTIPOS COIL CASED
Locke Part #: L5348MFG Part #: 1.912065
Orifice: .076, A (In.): 17-1/2, B (In.): 25-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P43BG MULTIPOS COIL CASED
Locke Part #: L5349MFG Part #: 1.912104
Orifice: .082, A (In.): 17-1/2, B (In.): 27-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P43CG MULTIPOS COIL- CASED
Locke Part #: L5350MFG Part #: 1.912105
Orifice: .082, A (In.): 21, B (In.): 27-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
L5340.jpg EM1P50CG MULTIPOS COIL - CASED
Locke Part #: L5351MFG Part #: 1.912110
Orifice: .091, A (In.): 21, B (In.): 27-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 19-1/2, F (In.): 20-1/2, G (In.): 21 Upflow/Horizontal (EM1P) for application flexibility, Microban antimicrobial additive in the drain pan to resist mold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Insulated galvanized steel coil case with durable embossed finish, Interlocking door assemblies and snug line seal grommets to minimize air leakage, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for installation flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations (EM1P only), Tubing located at door split for easy coil service or coil cleaning, Warranty, 10 year limited parts warranty available when applied with a system. See limited warranty document for details
Voltage: 208-230/1/60, Weight (Lbs): 352, Refrigerant: R410A, Tonnage: 2, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 16.7, Max Fuse/HACR Breaker: 25, Compressor - RLA: 11.2, Compressor - LRA: 60.8, Refrigerant Charge (Oz): 70, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,500, Cooling - CFM: 800, Heating – Input BTUH: 54,000, Heating – Output BTUH: 43,800, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 30-60, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 358, Refrigerant: R410A, Tonnage: 2, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 16.7, Max Fuse/HACR Breaker: 25, Compressor - RLA: 11.2, Compressor - LRA: 60.8, Refrigerant Charge (Oz): 70, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,500, Cooling - CFM: 800, Heating – Input BTUH: 72,000, Heating – Output BTUH: 58,400, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 370, Refrigerant: R410A, Tonnage: 2.5, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 18.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 12.8, Compressor - LRA: 64, Refrigerant Charge (Oz): 77, Cooling - Rated AHRI Capacity Btuh: 28,400, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 20,700, Cooling - CFM: 1000, Heating – Input BTUH: 72,000, Heating – Output BTUH: 58,400, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 383, Refrigerant: R410A, Tonnage: 3, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 20.6, Max Fuse/HACR Breaker: 30, Compressor - RLA: 14.1, Compressor - LRA: 72.2, Refrigerant Charge (Oz): 79, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,800, Cooling - CFM: 1200, Heating – Input BTUH: 72,000, Heating – Output BTUH: 58,400, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 35-65, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 389, Refrigerant: R410A, Tonnage: 3, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 20.6, Max Fuse/HACR Breaker: 30, Compressor - RLA: 14.1, Compressor - LRA: 72.2, Refrigerant Charge (Oz): 79, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,800, Cooling - CFM: 1200, Heating – Input BTUH: 90,000, Heating – Output BTUH: 72,900, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 460, Refrigerant: R410A, Tonnage: 3.5, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 84, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 30,000, Cooling - CFM: 1400, Heating – Input BTUH: 90,000, Heating – Output BTUH: 72,900, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 470, Refrigerant: R410A, Tonnage: 4, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 26.9, Max Fuse/HACR Breaker: 40, Compressor - RLA: 17.9, Compressor - LRA: 96, Refrigerant Charge (Oz): 82, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 35,000, Cooling - CFM: 1600, Heating – Input BTUH: 108,000, Heating – Output BTUH: 87,500, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 513, Refrigerant: R410A, Tonnage: 5, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 38.9, Max Fuse/HACR Breaker: 60, Compressor - RLA: 23.7, Compressor - LRA: 152.5, Refrigerant Charge (Oz): 125, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 41,600, Cooling - CFM: 1800, Heating – Input BTUH: 126,000, Heating – Output BTUH: 102,100, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 45-75, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 331, Refrigerant: R410A, Tonnage: 2, Minimum Volts @ 60Hz: 197, MCA: 16.7, Max Fuse/HACR Breaker: 25, Compressor - RLA: 11.2, Compressor - LRA: 60.8, Refrigerant Charge (Oz): 70, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,500, Cooling - CFM: 800, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 343, Refrigerant: R410A, Tonnage: 2.5, Minimum Volts @ 60Hz: 197, MCA: 18.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 12.8, Compressor - LRA: 64, Refrigerant Charge (Oz): 77, Cooling - Rated AHRI Capacity Btuh: 28,400, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 20,700, Cooling - CFM: 1000, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 351, Refrigerant: R410A, Tonnage: 3, Minimum Volts @ 60Hz: 197, MCA: 20.6, Max Fuse/HACR Breaker: 30, Compressor - RLA: 14.1, Compressor - LRA: 72.2, Refrigerant Charge (Oz): 79, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,800, Cooling - CFM: 1200, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 424, Refrigerant: R410A, Tonnage: 3.5, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 108, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 30,000, Cooling - CFM: 1400, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 428, Refrigerant: R410A, Tonnage: 4, Minimum Volts @ 60Hz: 197, MCA: 26.9, Max Fuse/HACR Breaker: 40, Compressor - RLA: 17.9, Compressor - LRA: 96, Refrigerant Charge (Oz): 106, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 35,000, Cooling - CFM: 1600, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 467, Refrigerant: R410A, Tonnage: 5, Minimum Volts @ 60Hz: 197, MCA: 38.9, Max Fuse/HACR Breaker: 60, Compressor - RLA: 23.7, Compressor - LRA: 152.5, Refrigerant Charge (Oz): 125, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 41,600, Cooling - CFM: 1800, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 333, Refrigerant: R410A, Tonnage: 2, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 17.4, Max Fuse/HACR Breaker: 25, Compressor - RLA: 10.9, Compressor - LRA: 59.3, Refrigerant Charge (Oz): 80, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,700, Cooling - CFM: 850, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 342, Refrigerant: R410A, Tonnage: 2.5, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 20.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 13.5, Compressor - LRA: 72.5, Refrigerant Charge (Oz): 96, Cooling - Rated AHRI Capacity Btuh: 28,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 21,700, Cooling - CFM: 1050, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 352, Refrigerant: R410A, Tonnage: 3, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 35, Compressor - RLA: 15.4, Compressor - LRA: 83.9, Refrigerant Charge (Oz): 81, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,200, Cooling - CFM: 1250, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 455, Refrigerant: R410A, Tonnage: 3.5, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 165, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 30,800, Cooling - CFM: 1400, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 460, Refrigerant: R410A, Tonnage: 4, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 27.0, Max Fuse/HACR Breaker: 45, Compressor - RLA: 18.0, Compressor - LRA: 117, Refrigerant Charge (Oz): 163, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 34,000, Cooling - CFM: 1600, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 482, Refrigerant: R410A, Tonnage: 5, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 39.7, Max Fuse/HACR Breaker: 60, Compressor - RLA: 24.3, Compressor - LRA: 144.2, Refrigerant Charge (Oz): 161, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 41,600, Cooling - CFM: 1800, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty
Voltage: 208-230/1/60, Weight (Lbs): 366, Refrigerant: R410A, Tonnage: 2, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 17.4, Max Fuse/HACR Breaker: 25, Compressor - RLA: 10.9, Compressor - LRA: 59.3, Refrigerant Charge (Oz): 80, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 72,000, Gas Heating - Output BTUH: 58,400, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 374, Refrigerant: R410A, Tonnage: 2.5, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 20.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 13.5, Compressor - LRA: 72.5, Refrigerant Charge (Oz): 96, Cooling - Rated AHRI Capacity Btuh: 28,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 72,000, Gas Heating - Output BTUH: 58,400, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 389, Refrigerant: R410A, Tonnage: 3, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 35, Compressor - RLA: 15.4, Compressor - LRA: 83.9, Refrigerant Charge (Oz): 81, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 90,000, Gas Heating - Output BTUH: 72,900, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 493, Refrigerant: R410A, Tonnage: 3.5, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 165, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 90,000, Gas Heating - Output BTUH: 72,900, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 506, Refrigerant: R410A, Tonnage: 4, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 27.0, Max Fuse/HACR Breaker: 45, Compressor - RLA: 18.0, Compressor - LRA: 117, Refrigerant Charge (Oz): 163, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 126,00, Gas Heating - Output BTUH: 102,100, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 45-75 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Voltage: 208-230/1/60, Weight (Lbs): 528, Refrigerant: R410A, Tonnage: 5, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 39.7, Max Fuse/HACR Breaker: 60, Compressor - RLA: 24.3, Compressor - LRA: 144.2, Refrigerant Charge (Oz): 161, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 126,00, Gas Heating - Output BTUH: 102,100, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 45-75 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available.
Product Image Not Available LP Conversion Kit
Locke Part #: L5388MFG Part #: 11U77
Dimension A: 37-1/2, Dimension C: 34-1/2, Dimension D: 33-3/4, Dimension E: 12, Used With: 2 Thru 3 Ton Models, Dimension - B: 37, Dimension F: 14-1/2, Dimension G: 18-3/4, Dimension H: 16-1/4, Dimension I: 15-1/2, Dimension J: 20
Dimension A: 45-1/2, Dimension C: 42-3/8, Dimension D: 33-1/10, Dimension E: 12, Used With: 3.5 Thru 5 Ton Models, Dimension - B: 36-1/4, Dimension F: 20, Dimension G: 21-3/10, Dimension H: 21-8/10, Dimension I: 15-1/2, Dimension J: 20
Product Image Not Available Lifting Brackets
Locke Part #: L5393MFG Part #: 11U76
Voltage: 208-230/60/1, Unit Weight: 117, Blower Motor: Communicating Enabled with Variable Speed Motor, Shipping Weight: 126, Metering Device: R410a TXV, Nominal Capacity: 2 Tons, Configuration: Multi-position (Upflow, Downflow, Horizontal), Refrigerant Connection - Suction OD (In): 5/8, Refrigerant Connection - Liquid OD (In): 3/8, Max Elec Heat Available (kW): 9, Transformer: 70 VA, 1" Filter Size (In): 15 x 20 Application, 2 - 5 ton sizes, Upflow, horizontal, and downflow capable, Sequenced for demand management, External access to heater circuit breakers, Installation, Shipped in one piece, but may be disassembled into two separate pieces for ease of installation, Multiposition - Factory ready for upflow, downflow, and horizontal left/ right applications, No external screw heads on the sides of the unit to fit in tight spaces, Cabinet, Thick fiberglass insulation, Painted, heavy-gauge galvanized cabinet, Filter rack built into every air handler, 2% or less air leakage, Dual position drain pans designed for upflow, downflow or horizontal applications, Deep, corrosion resistant plastic drain pans have dual pipe drains, Microban antimicrobial drain pans protect from mold, mildew, and other harmful microbes, Thick rubber gaskets between each section insure tight seal when converted to downflow, Components, Efficient ECM variable speed motors, 70 VA transformer, Field-installed 5-20 kW electric heat kits with easy plug connections, Built-in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Controls, Communicating control enabled, Thermostat flexibility: works with the Comfort T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Warranty, 10-year limited parts warranty available when applied with a system.
Voltage: 208-230/60/1, Unit Weight: 143, Blower Motor: Communicating Enabled with Variable Speed Motor, Shipping Weight: 152, Metering Device: R410a TXV, Nominal Capacity: 2.5 Tons, Configuration: Multi-position (Upflow, Downflow, Horizontal), Refrigerant Connection - Suction OD (In): 3/4, Refrigerant Connection - Liquid OD (In): 3/8, Max Elec Heat Available (kW): 15, Transformer: 70 VA, 1" Filter Size (In): 20 x 20 Application, 2 - 5 ton sizes, Upflow, horizontal, and downflow capable, Sequenced for demand management, External access to heater circuit breakers, Installation, Shipped in one piece, but may be disassembled into two separate pieces for ease of installation, Multiposition - Factory ready for upflow, downflow, and horizontal left/ right applications, No external screw heads on the sides of the unit to fit in tight spaces, Cabinet, Thick fiberglass insulation, Painted, heavy-gauge galvanized cabinet, Filter rack built into every air handler, 2% or less air leakage, Dual position drain pans designed for upflow, downflow or horizontal applications, Deep, corrosion resistant plastic drain pans have dual pipe drains, Microban antimicrobial drain pans protect from mold, mildew, and other harmful microbes, Thick rubber gaskets between each section insure tight seal when converted to downflow, Components, Efficient ECM variable speed motors, 70 VA transformer, Field-installed 5-20 kW electric heat kits with easy plug connections, Built-in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Controls, Communicating control enabled, Thermostat flexibility: works with the Comfort T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Warranty, 10-year limited parts warranty available when applied with a system.
Voltage: 208-230/60/1, Unit Weight: 150, Blower Motor: Communicating Enabled with Variable Speed Motor, Shipping Weight: 160, Metering Device: R410a TXV, Nominal Capacity: 3 Tons, Configuration: Multi-position (Upflow, Downflow, Horizontal), Refrigerant Connection - Suction OD (In): 3/4, Refrigerant Connection - Liquid OD (In): 3/8, Max Elec Heat Available (kW): 20, Transformer: 70 VA, 1" Filter Size (In): 20 x 20 Application, 2 - 5 ton sizes, Upflow, horizontal, and downflow capable, Sequenced for demand management, External access to heater circuit breakers, Installation, Shipped in one piece, but may be disassembled into two separate pieces for ease of installation, Multiposition - Factory ready for upflow, downflow, and horizontal left/ right applications, No external screw heads on the sides of the unit to fit in tight spaces, Cabinet, Thick fiberglass insulation, Painted, heavy-gauge galvanized cabinet, Filter rack built into every air handler, 2% or less air leakage, Dual position drain pans designed for upflow, downflow or horizontal applications, Deep, corrosion resistant plastic drain pans have dual pipe drains, Microban antimicrobial drain pans protect from mold, mildew, and other harmful microbes, Thick rubber gaskets between each section insure tight seal when converted to downflow, Components, Efficient ECM variable speed motors, 70 VA transformer, Field-installed 5-20 kW electric heat kits with easy plug connections, Built-in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Controls, Communicating control enabled, Thermostat flexibility: works with the Comfort T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Warranty, 10-year limited parts warranty available when applied with a system.
Voltage: 208-230/60/1, Unit Weight: 189, Blower Motor: Communicating Enabled with Variable Speed Motor, Shipping Weight: 201, Metering Device: R410a TXV, Nominal Capacity: 4 Tons, Configuration: Multi-position (Upflow, Downflow, Horizontal), Refrigerant Connection - Suction OD (In): 7/8, Refrigerant Connection - Liquid OD (In): 3/8, Max Elec Heat Available (kW): 20, Transformer: 70 VA, 1" Filter Size (In): 20 x 24 Application, 2 - 5 ton sizes, Upflow, horizontal, and downflow capable, Sequenced for demand management, External access to heater circuit breakers, Installation, Shipped in one piece, but may be disassembled into two separate pieces for ease of installation, Multiposition - Factory ready for upflow, downflow, and horizontal left/ right applications, No external screw heads on the sides of the unit to fit in tight spaces, Cabinet, Thick fiberglass insulation, Painted, heavy-gauge galvanized cabinet, Filter rack built into every air handler, 2% or less air leakage, Dual position drain pans designed for upflow, downflow or horizontal applications, Deep, corrosion resistant plastic drain pans have dual pipe drains, Microban antimicrobial drain pans protect from mold, mildew, and other harmful microbes, Thick rubber gaskets between each section insure tight seal when converted to downflow, Components, Efficient ECM variable speed motors, 70 VA transformer, Field-installed 5-20 kW electric heat kits with easy plug connections, Built-in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Controls, Communicating control enabled, Thermostat flexibility: works with the Comfort T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Warranty, 10-year limited parts warranty available when applied with a system.
Voltage: 208-230/60/1, Unit Weight: 189, Blower Motor: Communicating Enabled with Variable Speed Motor, Shipping Weight: 201, Metering Device: R410a TXV, Nominal Capacity: 5 Tons, Configuration: Multi-position (Upflow, Downflow, Horizontal), Refrigerant Connection - Suction OD (In): 7/8, Refrigerant Connection - Liquid OD (In): 3/8, Max Elec Heat Available (kW): 20, Transformer: 70 VA, 1" Filter Size (In): 20 x 24 Application, 2 - 5 ton sizes, Upflow, horizontal, and downflow capable, Sequenced for demand management, External access to heater circuit breakers, Installation, Shipped in one piece, but may be disassembled into two separate pieces for ease of installation, Multiposition - Factory ready for upflow, downflow, and horizontal left/ right applications, No external screw heads on the sides of the unit to fit in tight spaces, Cabinet, Thick fiberglass insulation, Painted, heavy-gauge galvanized cabinet, Filter rack built into every air handler, 2% or less air leakage, Dual position drain pans designed for upflow, downflow or horizontal applications, Deep, corrosion resistant plastic drain pans have dual pipe drains, Microban antimicrobial drain pans protect from mold, mildew, and other harmful microbes, Thick rubber gaskets between each section insure tight seal when converted to downflow, Components, Efficient ECM variable speed motors, 70 VA transformer, Field-installed 5-20 kW electric heat kits with easy plug connections, Built-in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Controls, Communicating control enabled, Thermostat flexibility: works with the Comfort T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Warranty, 10-year limited parts warranty available when applied with a system.
Product Image Not Available AEHK05CB-1 5KW STRIP HEAT 1PH
Locke Part #: L5491MFG Part #: 1.821114
Product Image Not Available AEHK09CB-1 9KW STRIP HEAT 1PH
Locke Part #: L5492MFG Part #: 1.821115
Product Image Not Available AEHK15CB-1 15KW STRIP HEAT 1PH
Locke Part #: L5493MFG Part #: 1.821116
Product Image Not Available AEHK20CB-1 20KW STRIP HEAT 1PH
Locke Part #: L5494MFG Part #: 1.821117
Product Image Not Available AEHBCC05NSA 5KW HEAT STRIP
Locke Part #: L5605MFG Part #: 1.821042
Heat: 5KW, Works With: BCS2M24-60V
Product Image Not Available AEHBCC07NSA 7.5KW HEAT STRIP
Locke Part #: L5606MFG Part #: 1.821043
Heat: 7.5KW, Works With: BCS2M24-60V
Product Image Not Available AEHBCC10NSA 10KW HEAT STRIP
Locke Part #: L5607MFG Part #: 1.821044
Heat: 10KW, Works With: BCS2M24-60V
Product Image Not Available AEHBCC15CSA 15KW HEAT STRIP
Locke Part #: L5609MFG Part #: 1.821046
Heat: 15KW, Works With: BCS2M36-60V
Product Image Not Available AEHBCC20CSA 20KW HEAT STRIP
Locke Part #: L5610MFG Part #: 1.821048
Heat: 20KW, Works With: BCS2M48-60V
Product Image Not Available AEHBCC25CLA 25KW HT STRP NOT FOR BCS2M!
Locke Part #: L5614MFG Part #: AEHBCC25CLA
L5629.jpg BCE3M18C00NA1P 1.5 TON AIR HANDLER
Locke Part #: L5619MFG Part #: 13Z01
Tons: 1.5, Volts/Hz/phase: 208-230/60/1, Max. Elec. Heat Available (kW): 10, Transformer Size & Type: 40 VA, Class 2, Filter Size (in.): 12 x 20, Suction (in.): 3/4, Liquid (in.): 3/8, Florator Piston Size: 53, Weight (lbs.): 104 Application, 1-1/2 - 5 ton sizes, Upflow and horizontal (counterflow capable with kits), Sequenced for demand management, External access to heater circuit breakers, Installation, 1 Piece design for easier installation, Multi position - Upflow/Horizontal Left/Right, Cabinet, Foil faced insulation, Painted heavy gauge galvanized cabinet, Filter rack built into every air handler, High strength, UV and heat-resistant plastic drain pan for corrosion resistance, Microban anti-microbial built in to drain pan to resist mold and mildew growth and fouling of the drain, 2% or less air leakage, Components, Efficient PSC Blower Motors, Standard Transformer and Blower Relay, Field Installed 2.5-20 kW Electric Heat Kits with easy plug connections, Built in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Accessories, Counterflow Kit, Single Point Power Kit, 10-year limited parts warranty available when applied with a system. See limited warranty document for details.
Product Image Not Available 12W61 DWNFLW ADAPTER FOR BCS CB26
Locke Part #: L5636MFG Part #: 12W61
Used With: 36D, 46D, 58C, 58D, & 60D Models
L5629.jpg BCE3M24C00NA1P 2 TON AIR HANDLER
Locke Part #: L5639MFG Part #: 13Z02
Tons: 2, Volts/Hz/phase: 208-230/60/1, Max. Elec. Heat Available (kW): 10, Transformer Size & Type: 40 VA, Class 2, Filter Size (in.): 15 x 20, Suction (in.): 7/8, Liquid (in.): 3/8, Florator Piston Size: 57, Weight (lbs.): 122 Application, 1-1/2 - 5 ton sizes, Upflow and horizontal (counterflow capable with kits), Sequenced for demand management, External access to heater circuit breakers, Installation, 1 Piece design for easier installation, Multi position - Upflow/Horizontal Left/Right, Cabinet, Foil faced insulation, Painted heavy gauge galvanized cabinet, Filter rack built into every air handler, High strength, UV and heat-resistant plastic drain pan for corrosion resistance, Microban anti-microbial built in to drain pan to resist mold and mildew growth and fouling of the drain, 2% or less air leakage, Components, Efficient PSC Blower Motors, Standard Transformer and Blower Relay, Field Installed 2.5-20 kW Electric Heat Kits with easy plug connections, Built in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Accessories, Counterflow Kit, Single Point Power Kit, 10-year limited parts warranty available when applied with a system. See limited warranty document for details.
L5640.jpg EH1P23AM-1 2 TON CASED HORIZONTAL COIL
Locke Part #: L5640MFG Part #: 1.911370
A (In.): 14-1/2, B (In.): 21-1/4, C (In.): 13, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 13-1/2, G (In.): 26-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P23BM-1 2 TON CASED HORIZONTAL COIL
Locke Part #: L5641MFG Part #: 1.911371
A (In.): 17-1/2, B (In.): 21-1/4, C (In.): 15, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 16-1/2, G (In.): 26-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P29AM-1 2.5 TON CASED HORIZONTAL COIL
Locke Part #: L5642MFG Part #: 1.911372
A (In.): 14-1/2, B (In.): 21-1/4, C (In.): 13, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 13-1/2, G (In.): 31-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P29BM-1 2.5 TON CASED HORIZONTAL COIL
Locke Part #: L5643MFG Part #: 1.911373
A (In.): 17-1/2, B (In.): 21-1/4, C (In.): 15, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 16-1/2, G (In.): 26-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P36BM-1 3 TON CASED HORIZONTAL COIL
Locke Part #: L5644MFG Part #: 1.911374
A (In.): 17-1/2, B (In.): 21-1/4, C (In.): 15, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 163-1/2, G (In.): 26-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P36CM-1 3 TON CASED HORIZONTAL COIL
Locke Part #: L5645MFG Part #: 1.911375
A (In.): 21, B (In.): 21-1/4, C (In.): 19-1/2, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 20, G (In.): 26-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P43BM-1 3.5 TON CASED HORIZONTAL COIL
Locke Part #: L5646MFG Part #: 1.911376
A (In.): 17-1/2, B (In.): 21-1/4, C (In.): 15, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 16-1/2, G (In.): 31-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P49CM-1 4 TON CASED HORIZONTAL COIL
Locke Part #: L5647MFG Part #: 1.911378
A (In.): 21, B (In.): 21-1/4, C (In.): 19-1/2, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 16-1/2, G (In.): 31-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P62CM-1 5 TON CASED HORIZONTAL COIL
Locke Part #: L5648MFG Part #: 1.911380
A (In.): 21, B (In.): 21-1/4, C (In.): 19-1/2, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 20, G (In.): 31-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5640.jpg EH1P62DM-1 5 TON CASED HORIZONTAL COIL
Locke Part #: L5649MFG Part #: 1.911381
A (In.): 24-1/2, B (In.): 21-1/4, C (In.): 23, D (In.): 19-3/4, E (In.): 20-1/4, F (In.): 20, G (In.): 31-1/2 Features, :, Cased, Dedicated horizontal, Microban@ antimicrobial additive in the drain pan to resist mold and mildew growth, Drain pan has trough to fully drain condensate away, Insulated galvanized steel coil case with durable embossed finish, Dual condensate drains on front and back of coil allows flexibility of placement to accommodate left or right airflow furnaces, Foil faced insulation for easy cleaning, Refrigerant connections on top of coil for ease of installation in left or right airflow furnaces, Compatible with R22 or R410A, Compatible with UV lights, 5 Year limited warranty
L5629.jpg BCE3M30C00NA1P 2.5 TON AIR HANDLER
Locke Part #: L5650MFG Part #: 13Z03
Tons: 2.5, Volts/Hz/phase: 208-230/60/1, Max. Elec. Heat Available (kW): 12.5, Transformer Size & Type: 40 VA, Class 2, Filter Size (in.): 15 x 20, Suction (in.): 7/8, Liquid (in.): 3/8, Florator Piston Size: 62, Weight (lbs.): 125 Application, 1-1/2 - 5 ton sizes, Upflow and horizontal (counterflow capable with kits), Sequenced for demand management, External access to heater circuit breakers, Installation, 1 Piece design for easier installation, Multi position - Upflow/Horizontal Left/Right, Cabinet, Foil faced insulation, Painted heavy gauge galvanized cabinet, Filter rack built into every air handler, High strength, UV and heat-resistant plastic drain pan for corrosion resistance, Microban anti-microbial built in to drain pan to resist mold and mildew growth and fouling of the drain, 2% or less air leakage, Components, Efficient PSC Blower Motors, Standard Transformer and Blower Relay, Field Installed 2.5-20 kW Electric Heat Kits with easy plug connections, Built in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Accessories, Counterflow Kit, Single Point Power Kit, 10-year limited parts warranty available when applied with a system. See limited warranty document for details.
L5629.jpg BCE3M36C00NA1P 3 TON AIR HANDLER
Locke Part #: L5651MFG Part #: 13Z04
Tons: 3, Volts/Hz/phase: 208-230/60/1, Max. Elec. Heat Available (kW): 15, Transformer Size & Type: 40 VA, Class 2, Filter Size (in.): 18 x 20, Suction (in.): 7/8, Liquid (in.): 3/8, Florator Piston Size: 71, Weight (lbs.): 160 Application, 1-1/2 - 5 ton sizes, Upflow and horizontal (counterflow capable with kits), Sequenced for demand management, External access to heater circuit breakers, Installation, 1 Piece design for easier installation, Multi position - Upflow/Horizontal Left/Right, Cabinet, Foil faced insulation, Painted heavy gauge galvanized cabinet, Filter rack built into every air handler, High strength, UV and heat-resistant plastic drain pan for corrosion resistance, Microban anti-microbial built in to drain pan to resist mold and mildew growth and fouling of the drain, 2% or less air leakage, Components, Efficient PSC Blower Motors, Standard Transformer and Blower Relay, Field Installed 2.5-20 kW Electric Heat Kits with easy plug connections, Built in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Accessories, Counterflow Kit, Single Point Power Kit, 10-year limited parts warranty available when applied with a system. See limited warranty document for details.
L5629.jpg BCE3M42C00NA1P 3.5 TON AIR HANDLER
Locke Part #: L5652MFG Part #: 13Z05
Tons: 3.5, Volts/Hz/phase: 208-230/60/1, Max. Elec. Heat Available (kW): 15, Transformer Size & Type: 40 VA, Class 2, Filter Size (in.): 18 x 24, Suction (in.): 7/8, Liquid (in.): 3/8, Florator Piston Size: 76, Weight (lbs.): 162 Application, 1-1/2 - 5 ton sizes, Upflow and horizontal (counterflow capable with kits), Sequenced for demand management, External access to heater circuit breakers, Installation, 1 Piece design for easier installation, Multi position - Upflow/Horizontal Left/Right, Cabinet, Foil faced insulation, Painted heavy gauge galvanized cabinet, Filter rack built into every air handler, High strength, UV and heat-resistant plastic drain pan for corrosion resistance, Microban anti-microbial built in to drain pan to resist mold and mildew growth and fouling of the drain, 2% or less air leakage, Components, Efficient PSC Blower Motors, Standard Transformer and Blower Relay, Field Installed 2.5-20 kW Electric Heat Kits with easy plug connections, Built in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Accessories, Counterflow Kit, Single Point Power Kit, 10-year limited parts warranty available when applied with a system. See limited warranty document for details.
L5629.jpg BCE3M48C00NA1P 4 TON AIR HANDLER
Locke Part #: L5653MFG Part #: 13Z06
Tons: 4, Volts/Hz/phase: 208-230/60/1, Max. Elec. Heat Available (kW): 20, Transformer Size & Type: 40 VA, Class 2, Filter Size (in.): 18 x 24, Suction (in.): 7/8, Liquid (in.): 3/8, Florator Piston Size: 80, Weight (lbs.): 185 Application, 1-1/2 - 5 ton sizes, Upflow and horizontal (counterflow capable with kits), Sequenced for demand management, External access to heater circuit breakers, Installation, 1 Piece design for easier installation, Multi position - Upflow/Horizontal Left/Right, Cabinet, Foil faced insulation, Painted heavy gauge galvanized cabinet, Filter rack built into every air handler, High strength, UV and heat-resistant plastic drain pan for corrosion resistance, Microban anti-microbial built in to drain pan to resist mold and mildew growth and fouling of the drain, 2% or less air leakage, Components, Efficient PSC Blower Motors, Standard Transformer and Blower Relay, Field Installed 2.5-20 kW Electric Heat Kits with easy plug connections, Built in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Accessories, Counterflow Kit, Single Point Power Kit, 10-year limited parts warranty available when applied with a system. See limited warranty document for details.
L5629.jpg BCE3M60C00NA1P 5 TON AIR HANDLER
Locke Part #: L5654MFG Part #: 13Z07
Tons: 5, Volts/Hz/phase: 208-230/60/1, Max. Elec. Heat Available (kW): 20, Transformer Size & Type: 40 VA, Class 2, Filter Size (in.): 18 x 24, Suction (in.): 7/8, Liquid (in.): 3/8, Florator Piston Size: 93, Weight (lbs.): 185 Application, 1-1/2 - 5 ton sizes, Upflow and horizontal (counterflow capable with kits), Sequenced for demand management, External access to heater circuit breakers, Installation, 1 Piece design for easier installation, Multi position - Upflow/Horizontal Left/Right, Cabinet, Foil faced insulation, Painted heavy gauge galvanized cabinet, Filter rack built into every air handler, High strength, UV and heat-resistant plastic drain pan for corrosion resistance, Microban anti-microbial built in to drain pan to resist mold and mildew growth and fouling of the drain, 2% or less air leakage, Components, Efficient PSC Blower Motors, Standard Transformer and Blower Relay, Field Installed 2.5-20 kW Electric Heat Kits with easy plug connections, Built in indoor time delay for increased efficiency, Sleeves on distributor tubing to protect tubing, Accessories, Counterflow Kit, Single Point Power Kit, 10-year limited parts warranty available when applied with a system. See limited warranty document for details.
L5655.jpg EFC08BCP-1A 2TON DRIVE ELECTRIC FURNACE
Locke Part #: L5655MFG Part #: 1.921122
Width: 16, Depth: 19-1/2, HP: 1/4, Tonnage: 1.5 - 2 ton, Speeds: 3, A (In.): 25, B (In.): 20-1/2, C (In.): 17-1/2
L5655.jpg EFC12BCP-1A 3 TON DRVE ELECTRIC FURNACE
Locke Part #: L5656MFG Part #: 1.921123
Width: 16, Depth: 19-1/2, HP: 1/3, Tonnage: 2.5 - 3 ton, Speeds: 3, A (In.): 25, B (In.): 20-1/2, C (In.): 17-1/2
L5655.jpg EFC16CCP-1A 4 TON DRIVE ELECTRIC FURNACE
Locke Part #: L5657MFG Part #: 1.921125
Width: 19-1/2, Depth: 19-1/2, HP: 3/4, Tonnage: 4 ton, Speeds: 3, A (In.): 25, B (In.): 20-1/2, C (In.): 21
L5655.jpg EFC20DCP-1A 5 TON DRIVE ELECTRIC FURNACE
Locke Part #: L5658MFG Part #: 1.921126
Width: 23, Depth: 19-1/2, HP: 3/4, Tonnage: 5 ton, Speeds: 3, A (In.): 25, B (In.): 20-1/2, C (In.): 24-1/2
Width: 16, Depth: 19-1/2, HP: 1/3, Tonnage: 2.5 - 3 ton, Speeds: Variable, A (In.): 25, B (In.): 20-1/2, C (In.): 17-1/2
Width: 19-1/2, Depth: 19-1/2, HP: 3/4, Tonnage: 3.5 - 4 ton, Speeds: Variable, A (In.): 25, B (In.): 20-1/2, C (In.): 21
Width: 23, Depth: 19-1/2, HP: 3/4, Tonnage: 5 ton, Speeds: Variable, A (In.): 25, B (In.): 20-1/2, C (In.): 24-1/2
Voltage: 208-240, kw: 5
Voltage: 208-240, kw: 10
Voltage: 208-240, kw: 15
Voltage: 208-240, kw: 20
Product Image Not Available AHBC10SA-1 10KW HEAT STRIP
Locke Part #: L5912MFG Part #: 1.821024
Product Image Not Available AHBC15SA-1 15KW HEAT STRIP
Locke Part #: L5913MFG Part #: 1.821026
Width: 16, Depth: 19-1/2, HP: 1/3, Tonnage: 1.5 - 2 ton, Speeds: Variable, A (In.): 25, B (In.): 21, C (In.): 17-1/2
L6732.jpg 4SHP13LC148F 4T 3PH 460V R410A CONDENSER
Locke Part #: L6732MFG Part #: 1.434027
Voltage Range: 414-506, Tonnage: 4, Voltage/ Phase/Hz: 460/3, Min. Circuit Ampacity: 8.8, Max. Overcurrent Device: 15a, Rated Load: 1.0a, Locked Rotor: 41.0a, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 186 Compressor, High-efficiency scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature-terminated defrost system, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Trade-available components, Defrost control features built-in diagnostics for easier service, Defrost control has short cycle protection to protect compressor, Defrost control is Quiet Shift capable, Defrost cycle is field selectable 30/60/90 minutes, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
L6732.jpg 4SHP13LC160F 5T 3PH 460V R410A CONDENSER
Locke Part #: L6733MFG Part #: 1.434028
Voltage Range: 414-506, Tonnage: 5, Voltage/ Phase/Hz: 460/3, Min. Circuit Ampacity: 10.7, Max. Overcurrent Device: 15a, Rated Load: 1.0a, Locked Rotor: 52.0a, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 240 Compressor, High-efficiency scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature-terminated defrost system, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Trade-available components, Defrost control features built-in diagnostics for easier service, Defrost control has short cycle protection to protect compressor, Defrost control is Quiet Shift capable, Defrost cycle is field selectable 30/60/90 minutes, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
Voltage Range: 197 - 253, Tonnage: 4, Voltage/ Phase/Hz: 230/3/60, Min. Circuit Ampacity: 18.8, Max. Overcurrent Device: 30a, Rated Load: 1.7a, Locked Rotor: 83.1a, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 186 Compressor, High-efficiency scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature-terminated defrost system, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Trade-available components, Defrost control features built-in diagnostics for easier service, Defrost control has short cycle protection to protect compressor, Defrost control is Quiet Shift capable, Defrost cycle is field selectable 30/60/90 minutes, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
Voltage Range: 197 - 253, Tonnage: 5, Voltage/ Phase/Hz: 230/3/60, Min. Circuit Ampacity: 21.3, Max. Overcurrent Device: 35a, Rated Load: 1.7a, Locked Rotor: 110.0a, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 240 Compressor, High-efficiency scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature-terminated defrost system, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Trade-available components, Defrost control features built-in diagnostics for easier service, Defrost control has short cycle protection to protect compressor, Defrost control is Quiet Shift capable, Defrost cycle is field selectable 30/60/90 minutes, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
Product Image Not Available For 4SCU13, 4SHP13, 4SHP16
Locke Part #: L6777MFG Part #: 34M72
Voltage Range: 414 - 506, Tonnage: 5, Min. Circuit Ampacity: 10.7, Max. Overcurrent Device: 15, Rated Load: 1.0, Locked Rotor: 52.0, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 160, Voltage/Hz/Phase: 460/3/60 Compressor, High-efficiency scroll compressor, R410A refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15ft. of line set Trade available components, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, R410a Refrigerant, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
Voltage Range: 197-253, Min. Circuit Ampacity: 12, Rated Load: 9, Locked Rotor: 48, Rated HP: 1/5, Nom. RPM: 1075, Refrig. Charge (oz.): 126, Voltage/Hz/Phase: 208-230/1/60, Max. Overcurrent Device (amps): 20, Rated Load (amps): 1, Liquid O.D. (in.): 3/8, Vapor O.D. (in.): 3/4 Compressor, High efficiency scroll compressor, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, R410a refrigerant, Cabinet, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with drain ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Bidirectional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature terminated defrost system, Defrost control is Quiet Shift capable, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Integrated control with LED diagnostics, Trade available components, Defrost control features built in diagnostics for easier service, Defrost control has short cycle protection to protect the compressor, Defrost cycle is field selectable 30/60/90 minutes, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/1/60, Voltage Range:, 197-253
Voltage Range: 197-253, Min. Circuit Ampacity: 18, Rated Load: 14, Locked Rotor: 58, Rated HP: 1/5, Nom. RPM: 1075, Refrig. Charge (oz.): 128, Voltage/Hz/Phase: 208-230/1/60, Max. Overcurrent Device (amps): 30, Rated Load (amps): 1, Liquid O.D. (in.): 3/8, Vapor O.D. (in.): 3/4 Compressor, High efficiency scroll compressor, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, R410a refrigerant, Cabinet, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with drain ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Bidirectional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature terminated defrost system, Defrost control is Quiet Shift capable, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Integrated control with LED diagnostics, Trade available components, Defrost control features built in diagnostics for easier service, Defrost control has short cycle protection to protect the compressor, Defrost cycle is field selectable 30/60/90 minutes, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/1/60, Voltage Range:, 197-253
Voltage Range: 197-253, Min. Circuit Ampacity: 17, Rated Load: 13, Locked Rotor: 64, Rated HP: 1/5, Nom. RPM: 1075, Refrig. Charge (oz.): 149, Voltage/Hz/Phase: 208-230/1/60, Max. Overcurrent Device (amps): 30, Rated Load (amps): 1, Liquid O.D. (in.): 3/8, Vapor O.D. (in.): 3/4 Compressor, High efficiency scroll compressor, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, R410a refrigerant, Cabinet, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with drain ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Bidirectional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature terminated defrost system, Defrost control is Quiet Shift capable, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Integrated control with LED diagnostics, Trade available components, Defrost control features built in diagnostics for easier service, Defrost control has short cycle protection to protect the compressor, Defrost cycle is field selectable 30/60/90 minutes, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/1/60, Voltage Range:, 197-253
Voltage Range: 197-253, Min. Circuit Ampacity: 19, Rated Load: 14, Locked Rotor: 77, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 181, Voltage/Hz/Phase: 208-230/1/60, Max. Overcurrent Device (amps): 30, Rated Load (amps): 2, Liquid O.D. (in.): 3/8, Vapor O.D. (in.): 7/8 Compressor, High efficiency scroll compressor, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, R410a refrigerant, Cabinet, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with drain ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Bidirectional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature terminated defrost system, Defrost control is Quiet Shift capable, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Integrated control with LED diagnostics, Trade available components, Defrost control features built in diagnostics for easier service, Defrost control has short cycle protection to protect the compressor, Defrost cycle is field selectable 30/60/90 minutes, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/1/60, Voltage Range:, 197-253
Voltage Range: 197-253, Min. Circuit Ampacity: 24, Rated Load: 18, Locked Rotor: 112, Rated HP: 1/3, Nom. RPM: 825, Refrig. Charge (oz.): 199, Voltage/Hz/Phase: 208-230/1/60, Max. Overcurrent Device (amps): 40, Rated Load (amps): 2, Liquid O.D. (in.): 3/8, Vapor O.D. (in.): 7/8 Compressor, High efficiency scroll compressor, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, R410a refrigerant, Cabinet, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with drain ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Bidirectional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature terminated defrost system, Defrost control is Quiet Shift capable, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Integrated control with LED diagnostics, Trade available components, Defrost control features built in diagnostics for easier service, Defrost control has short cycle protection to protect the compressor, Defrost cycle is field selectable 30/60/90 minutes, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/1/60, Voltage Range:, 197-253
Voltage Range: 197-253, Min. Circuit Ampacity: 29, Rated Load: 22, Locked Rotor: 117, Rated HP: 1/3, Nom. RPM: 825, Refrig. Charge (oz.): 199, Voltage/Hz/Phase: 208-230/1/60, Max. Overcurrent Device (amps): 50, Rated Load (amps): 2, Liquid O.D. (in.): 3/8, Vapor O.D. (in.): 7/8 Compressor, High efficiency scroll compressor, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, R410a refrigerant, Cabinet, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with drain ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Bidirectional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature terminated defrost system, Defrost control is Quiet Shift capable, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Integrated control with LED diagnostics, Trade available components, Defrost control features built in diagnostics for easier service, Defrost control has short cycle protection to protect the compressor, Defrost cycle is field selectable 30/60/90 minutes, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/1/60, Voltage Range:, 197-253
Voltage Range: 197-253, Min. Circuit Ampacity: 35, Rated Load: 26, Locked Rotor: 134, Rated HP: 1/3, Nom. RPM: 825, Refrig. Charge (oz.): 256, Voltage/Hz/Phase: 208-230/1/60, Max. Overcurrent Device (amps): 60, Rated Load (amps): 2, Liquid O.D. (in.): 3/8, Vapor O.D. (in.): 1-1/8 Compressor, High efficiency scroll compressor, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, R410a refrigerant, Cabinet, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Raised base pan with drain ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Bidirectional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Reliable, solid-state, time-initiated, temperature terminated defrost system, Defrost control is Quiet Shift capable, Service valves positioned for quick installation and easy service, Low pressure switch for loss of charge system protection, Integrated control with LED diagnostics, Trade available components, Defrost control features built in diagnostics for easier service, Defrost control has short cycle protection to protect the compressor, Defrost cycle is field selectable 30/60/90 minutes, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/1/60, Voltage Range:, 197-253
Weight (lbs): 202, Voltage Range: 414 - 506, Tonnage: 3, Refrigerant Type: R410A, Rated Load: 0.55, Locked Rotor: 38.0, Rated HP: 1/5, Voltage/Hz/Phase: 460/3/60, Min Circuit Ampacity: 7.8, Max Overcurrent Device: 15, Nom RPM: 1075, Refrig Charge (oz): 89, Deccription: 3 Phase Split System Air Conditioner, 13 Seer, 3 Ton, 460/3/60 V, R410A Compressor, High-efficiency scroll compressor, R410A refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15ft. of line set Trade available components, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, R410a Refrigerant, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
Weight (lbs): 220, Voltage Range: 414 - 506, Tonnage: 4, Refrigerant Type: R410A, Rated Load: 1.0, Locked Rotor: 41.0, Rated HP: 1/4, Voltage/Hz/Phase: 460/3/60, Min Circuit Ampacity: 8.8, Max Overcurrent Device: 15, Nom RPM: 825, Refrig Charge (oz): 122, Deccription: 3 Phase Split System Air Conditioner, 13 Seer, 4 Ton, 460/3/60 V, R410A Compressor, High-efficiency scroll compressor, R410A refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15ft. of line set Trade available components, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, R410a Refrigerant, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
L6790.jpg 4SCU14LER18P 1.5 TON 14SEER R410A COND
Locke Part #: L6790MFG Part #: 1.343095
Voltage Range: 197-253, Tonnage: 1-1/2, Weight (lbs.): 177, Min. Circuit Ampacity: 12.3, Rated Load: 9.0, Locked Rotor: 48.0, Rated HP: 1/5, Nom. RPM: 1075, Refrig. Charge (oz.): 108, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 20, Rated Load (amps): 1.1 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LER24P 2 TON 14SEER R410A COND
Locke Part #: L6791MFG Part #: 1.343071
Voltage Range: 197-253, Tonnage: 2, Weight (lbs.): 178, Min. Circuit Ampacity: 17.9, Rated Load: 13.5, Locked Rotor: 58.3, Rated HP: 1/5, Nom. RPM: 1075, Refrig. Charge (oz.): 122, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 30, Rated Load (amps): 1.1 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LER30P 2.5 TON 14SEER R410A COND
Locke Part #: L6792MFG Part #: 1.343097
Voltage Range: 197-253, Tonnage: 2-1/2, Weight (lbs.): 207, Min. Circuit Ampacity: 17.1, Rated Load: 12.8, Locked Rotor: 64.0, Rated HP: 1/6, Nom. RPM: 825, Refrig. Charge (oz.): 128, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 30, Rated Load (amps): 1.1 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LER36P 3 TON 14SEER R410A COND
Locke Part #: L6793MFG Part #: 1.343098
Voltage Range: 197-253, Tonnage: 3, Weight (lbs.): 210, Min. Circuit Ampacity: 18.7, Rated Load: 14.1, Locked Rotor: 77.0, Rated HP: 1/6, Nom. RPM: 825, Refrig. Charge (oz.): 137, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 30, Rated Load (amps): 1.1 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LER42P 3.5 TON 14SEER R410A COND
Locke Part #: L6794MFG Part #: 1.343099
Voltage Range: 197-253, Tonnage: 3-1/2, Weight (lbs.): 237, Min. Circuit Ampacity: 24.1, Rated Load: 18.0, Locked Rotor: 112.0, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 138, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 40, Rated Load (amps): 1.7 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LE148P 4 TON 14SEER R410A COND
Locke Part #: L6795MFG Part #: 1.343092
Voltage Range: 197-253, Tonnage: 4, Weight (lbs.): 262, Min. Circuit Ampacity: 28.9, Rated Load: 21.8, Locked Rotor: 117.0, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 160, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 50, Rated Load (amps): 1.7 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LE160P 5 TON 14SEER R410A COND
Locke Part #: L6796MFG Part #: 1.343094
Voltage Range: 197-253, Tonnage: 5, Weight (lbs.): 312, Min. Circuit Ampacity: 34.8, Rated Load: 26.4, Locked Rotor: 134.0, Rated HP: 1/3, Nom. RPM: 825, Refrig. Charge (oz.): 192, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 60, Rated Load (amps): 1.8 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
Voltage Range: 197 - 253, Tonnage: 3, Min. Circuit Ampacity: 14.2, Max. Overcurrent Device: 20, Rated Load: 1.1, Locked Rotor: 73.0, Rated HP: 1/5, Nom. RPM: 1075, Refrig. Charge (oz.): 89, Voltage/Hz/Phase: 230/3/60 Compressor, High-efficiency scroll compressor, R410A refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15ft. of line set Trade available components, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, R410a Refrigerant, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
Voltage Range: 197 - 253, Tonnage: 4, Min. Circuit Ampacity: 18.8, Max. Overcurrent Device: 30, Rated Load: 1.7, Locked Rotor: 83.1, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 122, Voltage/Hz/Phase: 230/3/60 Compressor, High-efficiency scroll compressor, R410A refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15ft. of line set Trade available components, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, R410a Refrigerant, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
Voltage Range: 197 - 253, Tonnage: 5, Min. Circuit Ampacity: 21.3, Max. Overcurrent Device: 35, Rated Load: 1.7, Locked Rotor: 110.0, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 160, Voltage/Hz/Phase: 230/3/60 Compressor, High-efficiency scroll compressor, R410A refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Components, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15ft. of line set Trade available components, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, R410a Refrigerant, 5 Year Limited Warranty on compressor, 1 Year Limited Warranty on all parts
L6790.jpg 4SCU14LE141P 3.5 TON 14SEER R410A COND
Locke Part #: L6807MFG Part #: 1.343090
Voltage Range: 197-253, Tonnage: 3.5, Weight (lbs.): 210, Min. Circuit Ampacity: 22.8, Rated Load: 16.7, Locked Rotor: 79.0, Rated HP: 1/4, Nom. RPM: 825, Refrig. Charge (oz.): 161, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 35, Rated Load (amps): 1.7 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LE147P 4TON 14SEER R410A COND
Locke Part #: L6808MFG Part #: 1.343091
Voltage Range: 197-253, Tonnage: 4, Weight (lbs.): 251, Min. Circuit Ampacity: 26.7, Rated Load: 19.9, Locked Rotor: 109.0, Rated HP: 1/3, Nom. RPM: 825, Refrig. Charge (oz.): 179, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 45, Rated Load (amps): 1.8 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
L6790.jpg 4SCU14LE159P 5TON 14SEER R410A COND
Locke Part #: L6809MFG Part #: 1.343093
Voltage Range: 197-253, Tonnage: 5, Weight (lbs.): 235, Min. Circuit Ampacity: 34.1, Rated Load: 25.0, Locked Rotor: 134.0, Rated HP: 1/3, Nom. RPM: 825, Refrig. Charge (oz.): 178, Voltage/Hz/Phase: 208-230/60/1, Max. Overcurrent Device (amps): 50, Rated Load (amps): 2.8 Compressor, High efficiency scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy duty compressor sound blanket for quiet operation, Cabinet, Full metal louvered jacket coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grille, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Components, Full metal jacket panels remove with just two screws per panel for easy coil cleaning and service, Filter drier installed for system protection, Service valves positioned for quick installation and easy service, Indoor coil orifice shipped with outdoor unit for optimum efficiency and capacity, Charged for 15 ft. of line set, Trade available components, Design, Designed for ambients up to 125 F, Voltage/Hz/Phase:, 208-230/60/1, Voltage Range:, 197-253
Product Image Not Available PHK15CT-1 15KW 3PH HEAT STRIP
Locke Part #: L6890MFG Part #: 1.821106
Product Image Not Available PHK20CT-1 20KW 3PH HEAT STRIP
Locke Part #: L6891MFG Part #: 1.821107
Product Image Not Available AECON817G DOWNFLOW ECONOMIZER
Locke Part #: L6899MFG Part #: 22W15
Shipping Weight (lbs): 196, Voltage Range: 197-253, Tonnage: 3, Refrigerant Type: R22, Voltage/Hz/Phase: 208-230/3/60, Min Circuit Ampacity: 14.5, Refrig Charge (oz): 92, Compressor - Locked Rotor: 73, Compressor - Rated Load: 10.8, Fan Motor - Nom RPM: 1075, Fan Motor - Rated HP: 1/5, Fan Motor - Rated Load: 1.1, Max Fuse (Amps): 25 Compressor, Nitrogen charged for replacement of R22 components only, High-efficiency scroll compressor, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambients up to 125 F, Warranty, 1 year parts; 5 year compressor
Shipping Weight (lbs): 212, Voltage Range: 197-253, Tonnage: 4, Refrigerant Type: R22, Voltage/Hz/Phase: 208-230/3/60, Min Circuit Ampacity: 17.7, Refrig Charge (oz): 120, Compressor - Locked Rotor: 93, Compressor - Rated Load: 12.8, Fan Motor - Nom RPM: 825, Fan Motor - Rated HP: 1/4, Fan Motor - Rated Load: 1.7, Max Fuse (Amps): 30 Compressor, Nitrogen charged for replacement of R22 components only, High-efficiency scroll compressor, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambients up to 125 F, Warranty, 1 year parts; 5 year compressor
Shipping Weight (lbs): 272, Voltage Range: 197-253, Tonnage: 5, Refrigerant Type: R22, Voltage/Hz/Phase: 208-230/3/60, Min Circuit Ampacity: 20.9, Refrig Charge (oz): 160, Compressor - Locked Rotor: 114, Compressor - Rated Load: 15.4, Fan Motor - Nom RPM: 825, Fan Motor - Rated HP: 1/4, Fan Motor - Rated Load: 1.7, Max Fuse (Amps): 35 Compressor, Nitrogen charged for replacement of R22 components only, High-efficiency scroll compressor, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, External gauge ports for easy service, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambients up to 125 F, Warranty, 1 year parts; 5 year compressor
Product Image Not Available EC1P19AG-1 CASED COIL UP/DOWN 14.5" WIDE
Locke Part #: L6928MFG Part #: 1.911224
EC1P.jpg EC1P24AG-1 CASED COIL UP/DOWN 14.5" WIDE
Locke Part #: L6941MFG Part #: 1.911176
Orifice: .062, A (In.): 14-1/2, B (In.): 20-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P24BG-1 CASED COIL UP/DOWN 17.5" WIDE
Locke Part #: L6942MFG Part #: 1.911177
Orifice: .062, A (In.): 17-1/2, B (In.): 20-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P30AG-1 CASED COIL UP/DOWN 14.5" WIDE
Locke Part #: L6943MFG Part #: 1.911179
Orifice: .070, A (In.): 14-1/2, B (In.): 24-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P30BG-1 CASED COIL UP/DOWN 17.5" WIDE
Locke Part #: L6944MFG Part #: 1.911180
Orifice: .070, A (In.): 17-1/2, B (In.): 24-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P30CG-1 CASED COIL UP/DOWN 21" WIDE
Locke Part #: L6945MFG Part #: 1.911181
Orifice: .070, A (In.): 21, B (In.): 24-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P36AG-1 CASED COIL UP/DOWN 14.5" WIDE
Locke Part #: L6946MFG Part #: 1.911182
Orifice: .076, A (In.): 14-1/2, B (In.): 24-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P36BG-1 CASED COIL UP/DOWN 17.5" WIDE
Locke Part #: L6947MFG Part #: 1.911183
Orifice: .076, A (In.): 17-1/2, B (In.): 24-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P36CG-1 CASED COIL UP/DOWN 21" WIDE
Locke Part #: L6948MFG Part #: 1.911184
Orifice: .076, A (In.): 21, B (In.): 24-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P49CG-1 CASED COIL UP/DOWN 21" WIDE
Locke Part #: L6949MFG Part #: 1.911188
Orifice: .091, A (In.): 21, B (In.): 29-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 19, F (In.): 21-1/2, G (In.): 22, Liquid O.D. (In.): 7/8, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P62CG-1 CASED COIL UP/DOWN 21" WIDE
Locke Part #: L6950MFG Part #: 1.911189
Orifice: .099, A (In.): 21, B (In.): 31-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 19, F (In.): 21-1/2, G (In.): 22, Liquid O.D. (In.): 7/8, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P62DG-1 CASED COIL UP/DOWN 24.5" WIDE
Locke Part #: L6951MFG Part #: 1.911191
Orifice: .099, A (In.): 24-1/2, B (In.): 29-1/2, C (In.): 23, D (In.): 23-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 7/8, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P23AG-1 CASED COIL UP/DOWN 14.5" WIDE
Locke Part #: L6952MFG Part #: 1.911225
Orifice: .062, A (In.): 14-1/2, B (In.): 18-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P29AG-1 CASED COIL UP/DOWN 14.5" WIDE
Locke Part #: L6953MFG Part #: 1.911227
Orifice: .070, A (In.): 14-1/2, B (In.): 25-1/2, C (In.): 13, D (In.): 13-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P43BG-1 CASED COIL UP/DOWN 17.5" WIDE
Locke Part #: L6954MFG Part #: 1.911228
Orifice: .082, A (In.): 17-1/2, B (In.): 29-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 7/8, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P43CG-1 CASED COIL UP/DOWN 21" WIDE
Locke Part #: L6955MFG Part #: 1.911322
Orifice: .082, A (In.): 21, B (In.): 29-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 7/8, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P50CG-1 CASED COIL UP/DOWN 21" WIDE
Locke Part #: L6956MFG Part #: 1.911187
Orifice: .091, A (In.): 21, B (In.): 27-1/2, C (In.): 19-1/2, D (In.): 20, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 7/8, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P23BG-1 CASED COIL UP/DOWN 17.5" WIDE
Locke Part #: L6957MFG Part #: 1.911226
Orifice: .062, A (In.): 17-1/2, B (In.): 18-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 18, F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/4, Vapor O.D. (In.): 3/8 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
EC1P.jpg EC1P29BG-1 CASED COIL UP/DOWN 17.5" WIDE
Locke Part #: L6958MFG Part #: 1.911397
Orifice: .065, A (In.): 17-1/2, B (In.): 18-1/2, C (In.): 16, D (In.): 16-1/2, E (In.): 18", F (In.): 20-1/2, G (In.): 21, Liquid O.D. (In.): 3/8, Vapor O.D. (In.): 3/4 Cased, Upflow/Counterflow (EC1P) for application flexibility, Microban antimicrobial additive in the drain pan to resistmold and mildew growth, One of the lowest water retention drain pans in the industry to minimize mold and mildew growth, Interlocking door assemblies and snug line seal grommets to minimize air leakage, Insulated galvanized steel coil case with durable embossed finish, External cabinet mounted distributor body designed for easy changing of orifice sizes and fast TXV connections, Foil-face insulation for easy cleaning, Two dual drain connections on front of coil for install flexibility of drain lines around furnace vent and utility connections, Side drain pan built in for easy horizontal coil installations EM1P only), Tubing located at door split for easy coil service or coil cleaning, All coils are compatible with R22 or R410A, All drain pans are compatible with UV lights, 10 year limited parts warranty available when applied with a system
Product Image Not Available EC1P48BG-1 CASED COIL UP/DOWN 17.5" WIDE
Locke Part #: L6959MFG Part #: 1.911185
Product Image Not Available PHK07BP-1 7.5KW STRIP HEAT 1PH
Locke Part #: L6969MFG Part #: 10W48
Voltage: 208-240, kw: 5
Voltage: 208-240, kw: 10
Voltage: 208-240, kw: 15
Voltage: 208-240, kw: 20
Product Image Not Available A96US2V045B12S 45K BTU 96% 2-STAGE VARI UP/HORZ
Locke Part #: L7700MFG Part #: 12F32 PD00144170
Product Image Not Available A96US2V070B12S 70K BTU 96% 2-STAGE VARI UP/HORZ
Locke Part #: L7701MFG Part #: 12F33 PD00144170
Product Image Not Available A96US2V090C16S 90K BTU 96% 2-STAGE VARI UP/HORZ
Locke Part #: L7702MFG Part #: 12F35 PD00144170
Product Image Not Available A96US2V110C20S 110K BTU 96% 2-STAGE VARI UP/HORZ
Locke Part #: L7703MFG Part #: 12F38 PD00144170
Product Image Not Available A96DS2V045B12S 45K BTU 96% 2-STAGE VARI DOWN
Locke Part #: L7705MFG Part #: 12F40 PD00144170
Product Image Not Available A96DS2V070B16S 70K BTU 96% 2-STAGE VARI DOWN
Locke Part #: L7706MFG Part #: 12F41 PD00144170
Product Image Not Available A96DS2V110C20S 110K BTU 96% 2-STAGE VARI DOWN
Locke Part #: L7707MFG Part #: 12F43 PD00144170
Voltage: 230/60/1, Weight (Lbs): 200, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 11.4, Compressor - LRA: 52.0, Refrigerant Charge (Oz): 117, Sound dBA: 74, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/5, Minimum Circuit Amp: 13.9, Max Over Current Device (amps): 20, Fan Motor - Rated Load (amps): 1.1, Fan Motor - Nominal RPM: 1075, Dimensions (Width x Depth x Height) In: 24-3/4 x 26-3/4 x 29-3/4, Nominal Capacity (Btuh): 24,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 230/60/1, Weight (Lbs): 230, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 19.0, Compressor - LRA: 82.0, Refrigerant Charge (Oz): 137, Sound dBA: 74, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/6, Minimum Circuit Amp: 21.9, Max Over Current Device (amps): 35, Fan Motor - Rated Load (amps): 1.1, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 29-3/4, Nominal Capacity (Btuh): 36,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 230/60/1, Weight (Lbs): 262, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 24.0, Compressor - LRA: 96.0, Refrigerant Charge (Oz): 180, Sound dBA: 76, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/6, Minimum Circuit Amp: 28.1, Max Over Current Device (amps): 45, Fan Motor - Rated Load (amps): 1.1, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 37-3/4, Nominal Capacity (Btuh): 48,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 230/60/1, Weight (Lbs): 310, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 26.0, Compressor - LRA: 118.0, Refrigerant Charge (Oz): 214, Sound dBA: 76, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/4, Minimum Circuit Amp: 33.8, Max Over Current Device (amps): 55, Fan Motor - Rated Load (amps): 1.7, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 43-3/4, Nominal Capacity (Btuh): 60,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 230/60/1, Weight (Lbs): 207, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 11.4, Compressor - LRA: 52, Refrigerant Charge (Oz): 146, Sound dBA: 73, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/10, Minimum Circuit Amp: 13.5, Max Over Current Device (amps): 20, Fan Motor - Rated Load (amps): 0.7, Fan Motor - Nominal RPM: 1075, Dimensions (Width x Depth x Height) In: 24-3/4 x 26-3/4 x 33-3/4, Nominal Capacity (Btuh): 24,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 230/60/1, Weight (Lbs): 253, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 19.0, Compressor - LRA: 82, Refrigerant Charge (Oz): 192, Sound dBA: 75, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/4, Minimum Circuit Amp: 22.5, Max Over Current Device (amps): 35, Fan Motor - Rated Load (amps): 1.7, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 37-3/4, Nominal Capacity (Btuh): 36,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 230/60/1, Weight (Lbs): 288, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 24.0, Compressor - LRA: 96, Refrigerant Charge (Oz): 236, Sound dBA: 75, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/3, Minimum Circuit Amp: 28.2, Max Over Current Device (amps): 45, Fan Motor - Rated Load (amps): 1.8, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 35-3/4 x 37-1/4 x 37-3/4, Nominal Capacity (Btuh): 48,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 230/60/1, Weight (Lbs): 313, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 26.0, Compressor - LRA: 118, Refrigerant Charge (Oz): 244, Sound dBA: 74, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/3, Minimum Circuit Amp: 35.1, Max Over Current Device (amps): 60, Fan Motor - Rated Load (amps): 2.8, Fan Motor - Nominal RPM: ECM, Dimensions (Width x Depth x Height) In: 35-3/4 x 37-1/4 x 43-3/4, Nominal Capacity (Btuh): 60,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 3 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 66,000, Output (Btuh): 52,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 128, Cabinet Width (In): 14.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 3 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 143, Cabinet Width (In): 17.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 4 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 154, Cabinet Width (In): 17.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 5 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 173, Cabinet Width (In): 21.0 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 5 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 110,000, Output (Btuh): 87,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 181, Cabinet Width (In): 21.0 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Gas Inlet: 1/2", Motor HP: 1/3, Nominal Cooling Capacity: 2-3, Weight (lbs.): 110, Input (BTUH): 44,000, Output (BTUH): 35,200, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 6.1, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 1/3, Nominal Cooling Capacity: 2-3, Weight (lbs.): 119, Input (BTUH): 66,000, Output (BTUH): 52,800, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 6.1, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 1/2, Nominal Cooling Capacity: 3-4, Weight (lbs.): 183, Input (BTUH): 88,000, Output (BTUH): 70,400, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 8.2, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 1/2, Nominal Cooling Capacity: 3-4, Weight (lbs.): 151, Input (BTUH): 110,000, Output (BTUH): 88,000, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 8.2, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 3/4, Nominal Cooling Capacity: 4-5, Weight (lbs.): 161, Input (BTUH): 110,000, Output (BTUH): 88,000, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 10, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 3/4, Nominal Cooling Capacity: 4-5, Weight (lbs.): 174, Input (BTUH): 132,000, Output (BTUH): 105,600, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 10, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 1/3, Nominal Cooling Capacity: 2-3, Weight (lbs.): 112, Input (BTUH): 44,000, Output (BTUH): 35,200, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 6.1, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 1/3, Nominal Cooling Capacity: 2-3, Weight (lbs.): 121, Input (BTUH): 66,000, Output (BTUH): 52,800, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 6.1, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 1/2, Nominal Cooling Capacity: 3-4, Weight (lbs.): 140, Input (BTUH): 88,000, Output (BTUH): 70,400, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 8.2, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
Gas Inlet: 1/2", Motor HP: 3/4, Nominal Cooling Capacity: 4-5, Weight (lbs.): 163, Input (BTUH): 110,000, Output (BTUH): 88,000, AFUE: 80%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 10, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel tapered crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saving last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connections, "L" designated models comply with California's South Coast Air Quality Management district Low NOx requirements, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available. See limited warranty document for details.
L7939.jpg A95UH1D045B12A UP/HZ FUR 95% 1-STG 45M 1200 C
Locke Part #: L7939MFG Part #: 66W65 PD00144170
Gas Inlet: 1/2", Motor HP: 1/3, Nominal Cooling Capacity: 2-3, Weight (lbs.): 123, Input (BTUH): 44,000, Output (BTUH): 42,000, AFUE: 95%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 6.1, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel primary heat exchanger with crimped no weld construction, AL, 29-4C Stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saves last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connection, Design certified for direct and non-direct vent applications, Warranty, 10 year limited parts warranty/lifetime heat exchanger warranty available. See limited warranty document for details.
L7939.jpg A95UH1D070B12A UP/HZ FUR 95% 1-STG 70M 1200 CFM
Locke Part #: L7940MFG Part #: 66W67 PD00144170
Gas Inlet: 1/2", Motor HP: 1/3, Nominal Cooling Capacity: 2-3, Weight (lbs.): 128, Input (BTUH): 66,000, Output (BTUH): 64,000, AFUE: 95%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 6.1, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel primary heat exchanger with crimped no weld construction, AL, 29-4C Stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saves last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connection, Design certified for direct and non-direct vent applications, Warranty, 10 year limited parts warranty/lifetime heat exchanger warranty available. See limited warranty document for details.
L7939.jpg A95UH1D090C16A UP/HZ FUR 95% 1-STG 90M 1600 CFM
Locke Part #: L7941MFG Part #: 66W69 PD00144170
Gas Inlet: 1/2", Motor HP: 1/2, Nominal Cooling Capacity: 3-4, Weight (lbs.): 148, Input (BTUH): 88,000, Output (BTUH): 85,000, AFUE: 95%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 8.2, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel primary heat exchanger with crimped no weld construction, AL, 29-4C Stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saves last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connection, Design certified for direct and non-direct vent applications, Warranty, 10 year limited parts warranty/lifetime heat exchanger warranty available. See limited warranty document for details.
L7939.jpg A95UH1D110C16A UP/HZ FUR 95% 1-STG 110M 1600 CFM
Locke Part #: L7942MFG Part #: 66W70 PD00144170
Gas Inlet: 1/2", Motor HP: 1/2, Nominal Cooling Capacity: 3-4, Weight (lbs.): 157, Input (BTUH): 110,000, Output (BTUH): 106,000, AFUE: 95%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 8.2, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel primary heat exchanger with crimped no weld construction, AL, 29-4C Stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saves last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connection, Design certified for direct and non-direct vent applications, Warranty, 10 year limited parts warranty/lifetime heat exchanger warranty available. See limited warranty document for details.
L7939.jpg A95UH1D110C20A UP/HZ FUR 95% 1-STG 110M 2000 CFM
Locke Part #: L7943MFG Part #: 66W71 PD00144170
Gas Inlet: 1/2", Motor HP: 3/4, Nominal Cooling Capacity: 4-5, Weight (lbs.): 163, Input (BTUH): 110,000, Output (BTUH): 106,000, AFUE: 95%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 10, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel primary heat exchanger with crimped no weld construction, AL, 29-4C Stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saves last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connection, Design certified for direct and non-direct vent applications, Warranty, 10 year limited parts warranty/lifetime heat exchanger warranty available. See limited warranty document for details.
L7939.jpg A95UH1D135D20A UP/HZ FUR 95% 1-STG 135M 2000 CFM
Locke Part #: L7944MFG Part #: 66W72 PD00144170
Gas Inlet: 1/2", Motor HP: 3/4, Nominal Cooling Capacity: 4-5, Weight (lbs.): 180, Input (BTUH): 135,000, Output (BTUH): 126,000, AFUE: 95%, Volts / Hz / Phase: 120/60/1, Min. Time Delay Breaker or Fuse: 15, Nominal F.L.A.: 10, Trans. (V.A.): 40 Heat Exchanger Design, Aluminized steel primary heat exchanger with crimped no weld construction, AL, 29-4C Stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed PSC blower motor, Easily removable slide out blower design, Controls, Single stage gas valve, Self diagnostics saves last 5 fault codes regardless of power interruption, Installation Features, Left or right utility connection, Design certified for direct and non-direct vent applications, Warranty, 10 year limited parts warranty/lifetime heat exchanger warranty available. See limited warranty document for details.
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 3 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Input (Btuh): 66,000, Output (Btuh): 52,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 130, Cabinet Width (In): 14.5 Configurations, Downflow, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 4 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Input (Btuh): 88,000, Output (Btuh): 69,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 153, Cabinet Width (In): 17.5 Configurations, Downflow, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 5 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Input (Btuh): 110,000, Output (Btuh): 87,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 173, Cabinet Width (In): 21.0 Configurations, Downflow, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Product Image Not Available A95DF1D045B12A DOWNFLOW 1-STAGE 95% 45M 1200CFM
Locke Part #: L7954MFG Part #: 66W73 PD00144170
Product Image Not Available A95DF1D070B12A DOWNFLOW 1-STAGE 95% 70M 1200CFM
Locke Part #: L7955MFG Part #: 66W74 PD00144170
Product Image Not Available A95DF1D090C20A DOWNFLOW 1-STAGE 95% 90M 2000CFM
Locke Part #: L7956MFG Part #: 66W75 PD00144170
Product Image Not Available A95DF1D110C20A DOWNFLOW 1-STAGE 95% 110M 2000CFM
Locke Part #: L7957MFG Part #: 66W76 PD00144170
Product Image Not Available A93 - A95 - 92G - 95G Furnaces
Locke Part #: L7961MFG Part #: 11K50
Product Image Not Available 21" RETURN AIR BASE
Locke Part #: L7967MFG Part #: 68W63
Size: 21"
Product Image Not Available L.P. Conversion Kit
Locke Part #: L7969MFG Part #: 11K48
Product Image Not Available A80 & 80G2 2 Stage Furnaces
Locke Part #: L7971MFG Part #: 68W76
Product Image Not Available A96MV Furances
Locke Part #: L7973MFG Part #: 68W77
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Modulation, Nominal Cooling Capacity: 3 Tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Heat Exchanger: Stainless steel, Input (Btuh): 66,000, Output (Btuh): 64,000, AFUE (ICS): 97.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 138, Cabinet Width (In): 17.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, 409 stainless steel primary heat exchanger with crimped no-weld construction, AL 29-4C stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Modulating gas valve, Thermostat flexibility: works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Venting, Category 4 direct vent appliance (2 pipe only), Installation Features, Left or right utility connections, Zero step horizontal conversion, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: Modulation, Nominal Cooling Capacity: 4 Tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Heat Exchanger: Stainless steel, Input (Btuh): 88,000, Output (Btuh): 85,000, AFUE (ICS): 97.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.1, Trans (VA): 40, Approx Shipping Weight (Lbs): 165, Cabinet Width (In): 21.0 Configurations, Upflow / Horizontal, Heat Exchanger Design, 409 stainless steel primary heat exchanger with crimped no-weld construction, AL 29-4C stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Modulating gas valve, Thermostat flexibility: works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Venting, Category 4 direct vent appliance (2 pipe only), Installation Features, Left or right utility connections, Zero step horizontal conversion, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Modulation, Nominal Cooling Capacity: 5 Tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Heat Exchanger: Stainless steel, Input (Btuh): 88,000, Output (Btuh): 85,000, AFUE (ICS): 97.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 165, Cabinet Width (In): 21.0 Configurations, Upflow / Horizontal, Heat Exchanger Design, 409 stainless steel primary heat exchanger with crimped no-weld construction, AL 29-4C stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Modulating gas valve, Thermostat flexibility: works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Venting, Category 4 direct vent appliance (2 pipe only), Installation Features, Left or right utility connections, Zero step horizontal conversion, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Modulation, Nominal Cooling Capacity: 3 Tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Heat Exchanger: Stainless steel, Input (Btuh): 66,000, Output (Btuh): 64,000, AFUE (ICS): 97.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 140, Cabinet Width (In): 17.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, 409 stainless steel primary heat exchanger with crimped no-weld construction, AL 29-4C stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Modulating gas valve, Thermostat flexibility: works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Venting, Category 4 direct vent appliance (2 pipe only), Installation Features, Left or right utility connections, Zero step horizontal conversion, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: Modulation, Nominal Cooling Capacity: 4 Tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Heat Exchanger: Stainless steel, Input (Btuh): 88,000, Output (Btuh): 85,000, AFUE (ICS): 97.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.1, Trans (VA): 40, Approx Shipping Weight (Lbs): 165, Cabinet Width (In): 21.0 Configurations, Upflow / Horizontal, Heat Exchanger Design, 409 stainless steel primary heat exchanger with crimped no-weld construction, AL 29-4C stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Modulating gas valve, Thermostat flexibility: works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Venting, Category 4 direct vent appliance (2 pipe only), Installation Features, Left or right utility connections, Zero step horizontal conversion, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Modulation, Nominal Cooling Capacity: 5 Tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Heat Exchanger: Stainless steel, Input (Btuh): 88,000, Output (Btuh): 85,000, AFUE (ICS): 97.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 165, Cabinet Width (In): 21.0 Configurations, Upflow / Horizontal, Heat Exchanger Design, 409 stainless steel primary heat exchanger with crimped no-weld construction, AL 29-4C stainless steel secondary heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Modulating gas valve, Thermostat flexibility: works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Venting, Category 4 direct vent appliance (2 pipe only), Installation Features, Left or right utility connections, Zero step horizontal conversion, Removable floor base for bottom return air, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 1-1/2 - 3, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Input (Btuh): 44,000, Output (Btuh): 35,200, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 6.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 111 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 1-1/2 - 3, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Input (Btuh): 66,000, Output (Btuh): 52,800, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 6.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 127 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 2-1/2 - 4, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,400, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 8.4, Trans (VA): 40, Approx Shipping Weight (Lbs): 142 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 3 - 5, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,400, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.9, Trans (VA): 40, Approx Shipping Weight (Lbs): 152 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 4 - 5, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Input (Btuh): 110,000, Output (Btuh): 88,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.9, Trans (VA): 40, Approx Shipping Weight (Lbs): 160 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 4 - 5, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Input (Btuh): 132,000, Output (Btuh): 105,600, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.9, Trans (VA): 40, Approx Shipping Weight (Lbs): 178 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 2 - 3, Blower: High Efficiency Motor, Configuration: Downflow, Input (Btuh): 44,000, Output (Btuh): 35,200, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 6.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 113 Configurations, Downflow, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 2 - 3, Blower: High Efficiency Motor, Configuration: Downflow, Input (Btuh): 66,000, Output (Btuh): 52,800, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 6.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 128 Configurations, Downflow, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 3 - 4, Blower: High Efficiency Motor, Configuration: Downflow, Input (Btuh): 88,000, Output (Btuh): 70,400, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 8.4, Trans (VA): 40, Approx Shipping Weight (Lbs): 140 Configurations, Downflow, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 4 - 5, Blower: High Efficiency Motor, Configuration: Downflow, Input (Btuh): 110,000, Output (Btuh): 88,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.9, Trans (VA): 40, Approx Shipping Weight (Lbs): 160 Configurations, Downflow, Heat Exchanger Design, Aluminized steel tapered crimped non-welded clam shell heat exchanger design, Burners, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment, Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saving last 10 fault codes regardlesss of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left or right utility connections, Removable floor base (upflow / horizontal units) for bottom return air, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available
Product Image Not Available L.P. Conversion Kit
Locke Part #: L7996MFG Part #: 11K48
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 1-1/2 - 3, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Heat Exchanger: Stainless Steel, Input (Btuh): 44,000, Output (Btuh): 42,000, AFUE (ICS): 95.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 6.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 129 Configurations, Upflow / Horizontal, Heat Exchanger Design, Stainless steel primary heat exchanger with crimped non-welded construction, AL 29-4C Stainless steel secondary heat exchanger, Burner, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment., Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saves last 10 fault codes regardless of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Designed certified for direct (2-pipe) and non direct (1-pipe) applications, Easily vented with PVC pipe, Installation Features, Left or right utility connection, Zero step horizontal conversion, Design certified for direct and non-direct vent applications, Removable floor base (upflow / horizontal units) for bottom return air, Complies with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available.
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 1-1/2 - 3, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Heat Exchanger: Stainless Steel, Input (Btuh): 66,000, Output (Btuh): 64,000, AFUE (ICS): 95.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 6.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 136 Configurations, Upflow / Horizontal, Heat Exchanger Design, Stainless steel primary heat exchanger with crimped non-welded construction, AL 29-4C Stainless steel secondary heat exchanger, Burner, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment., Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saves last 10 fault codes regardless of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Designed certified for direct (2-pipe) and non direct (1-pipe) applications, Easily vented with PVC pipe, Installation Features, Left or right utility connection, Zero step horizontal conversion, Design certified for direct and non-direct vent applications, Removable floor base (upflow / horizontal units) for bottom return air, Complies with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available.
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 2-1/2 - 4, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Heat Exchanger: Stainless Steel, Input (Btuh): 88,000, Output (Btuh): 85,000, AFUE (ICS): 95.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 8.4, Trans (VA): 40, Approx Shipping Weight (Lbs): 160 Configurations, Upflow / Horizontal, Heat Exchanger Design, Stainless steel primary heat exchanger with crimped non-welded construction, AL 29-4C Stainless steel secondary heat exchanger, Burner, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment., Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saves last 10 fault codes regardless of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Designed certified for direct (2-pipe) and non direct (1-pipe) applications, Easily vented with PVC pipe, Installation Features, Left or right utility connection, Zero step horizontal conversion, Design certified for direct and non-direct vent applications, Removable floor base (upflow / horizontal units) for bottom return air, Complies with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available.
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 3 - 5, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Heat Exchanger: Stainless Steel, Input (Btuh): 110,000, Output (Btuh): 106,000, AFUE (ICS): 95.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.9, Trans (VA): 40, Approx Shipping Weight (Lbs): 170 Configurations, Upflow / Horizontal, Heat Exchanger Design, Stainless steel primary heat exchanger with crimped non-welded construction, AL 29-4C Stainless steel secondary heat exchanger, Burner, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment., Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saves last 10 fault codes regardless of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Designed certified for direct (2-pipe) and non direct (1-pipe) applications, Easily vented with PVC pipe, Installation Features, Left or right utility connection, Zero step horizontal conversion, Design certified for direct and non-direct vent applications, Removable floor base (upflow / horizontal units) for bottom return air, Complies with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available.
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 3-1/2 - 5, Blower: High Efficiency Motor, Configuration: Upflow/Horizontal, Heat Exchanger: Stainless Steel, Input (Btuh): 132,000, Output (Btuh): 126,000, AFUE (ICS): 95.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 10.9, Trans (VA): 40, Approx Shipping Weight (Lbs): 187 Configurations, Upflow / Horizontal, Heat Exchanger Design, Stainless steel primary heat exchanger with crimped non-welded construction, AL 29-4C Stainless steel secondary heat exchanger, Burner, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment., Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saves last 10 fault codes regardless of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Designed certified for direct (2-pipe) and non direct (1-pipe) applications, Easily vented with PVC pipe, Installation Features, Left or right utility connection, Zero step horizontal conversion, Design certified for direct and non-direct vent applications, Removable floor base (upflow / horizontal units) for bottom return air, Complies with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available.
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 2-1/2 - 4, Blower: High Efficiency Motor, Configuration: Downflow, Heat Exchanger: Stainless Steel, Input (Btuh): 66,000, Output (Btuh): 64,000, AFUE (ICS): 95.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 8.4, Trans (VA): 40, Approx Shipping Weight (Lbs): 146 Configurations, Downflow, Heat Exchanger Design, Stainless steel primary heat exchanger with crimped non-welded construction, AL 29-4C Stainless steel secondary heat exchanger, Burner, Aluminized steel inshot burners for smooth ignition, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, Multi-speed high efficiency (constant torque) blower motor, Easily removable slide out blower design, Enhanced cooling SEER ratings when applied with properly matched cooling equipment., Controls, Single stage gas valve, Durable silicon nitride ignitor, Self diagnostics saves last 10 fault codes regardless of power interruption, Control features electronic air cleaner and humidifier terminals, Venting, Designed certified for direct (2-pipe) and non direct (1-pipe) applications, Easily vented with PVC pipe, Installation Features, Left or right utility connection, Design certified for direct and non-direct vent applications, Zero step horizontal conversion, Removable floor base (upflow / horizontal units) for bottom return air, Complies with California's South Coast Air Quality Management district Low NOx requirements, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available.
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: Single, Nominal Cooling Capacity: 3 - 5, Blower: High Efficiency Motor, Configuration: Downflow, Heat Exchanger: Stainless Steel, Input (Btuh): 110,000, Output (Btuh): 106,000, AFUE (I