Loading ...

Loading ...

Search in: ALLIED AIR COMMERCIAL

Product Image Not AvailableHail Guard for 3, 4, 5 ton TGA, KHA, KCA
Locke Part #: L4102MFG Part #: 13R98 Compare
Product Image Not AvailableEconomizer for 3, 4, 5 ton TGA, KHA, KCA
Locke Part #: L4105MFG Part #: 14D90 Compare
Product Image Not AvailableHorizontal Conversion Kit for TGA180
Locke Part #: L4116MFG Part #: 87M00 Compare
Product Image Not AvailableFor 10 Ton KG-KC-KH Package Units
Locke Part #: L4117MFG Part #: 12X66 Compare
Amp: 15
Product Image Not AvailableRoof Curb
Locke Part #: L4141MFG Part #: 11T96 Compare
Height: 26"
Product Image Not AvailableRoof Curb
Locke Part #: L4150MFG Part #: 11F59 Compare
L4303.jpg4 Ton 3PH 208/230V Gas/Electric Packaged Units
Locke Part #: L4304MFG Part #: AC379 Compare
Volts: 208/230, Phase: 3, Tonnage: 4, Outdoor Coil Net Face Area Sq. Ft.: 15.6, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 1.5, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: 1/4, Outdoor Fans Motor rpm: 825, Outdoor Fans Total Motor watts: 250, Outdoor Fans Diameter in.- No. of Blades: 24-3, Outdoor Fans Total Air Volume - CFM: 3,500 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA., Components bonded for grounding to meet safety standards for servicing required by UL., Certified in accordance with the USE certification program, which is based on ARI Standard 210/240-2006, All models are ASHRAE 90.1 compliant., All models are ENERGY STAR certified, ISO 9001 Registered manufacturing quality system., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Electrical and gas lines can be brought through the unit base or through horizontal access knock-outs. Optional bottom gas entry kit is available., Access panels are provided for the economizer/filter section, heating/blower section, and the compressor/controls section., Cooling system, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 f to 125 f without any additional controls., Compressor resiliently mounted on rubber grommets for quiet operation., Scroll compressors for high performance, reliability and quiet operation., Thermal expansion valve assures optimal performance throughout the application range. Removable element head., High pressure switch protects the compressor from overload conditions such as dirty condenser coils, blockedrefrigerant flow, or loss of outdoor fan operation., High capacity filter/drier protects from dirt and moisture, Freezestat protects the evaporator coil from damaging ice build-up due to conditions such as low/no air flow, or low refrigerant charge., Copper tube coil construction, enhanced rippled-edgealuminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator coil with cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity, Two independent formed condenser coils allow separation for cleaning., Plastic condensate drain pan, sloped to meet drainage requirements of ASHRAE 62.1. Side or bottom drain connections. Reversible to allow connection at back of unit., PVC coated fan guard furnished.
Product Image Not Available15 kW Heat Strip for KHA, KCA
Locke Part #: L4310MFG Part #: 14W36 Compare
Product Image Not Available22.5 kW Heat Strip for KHA, KCA
Locke Part #: L4311MFG Part #: 14W37 Compare
L4336.jpgTAA072S4SY 6T AH 208/230V 3PH
Locke Part #: L4336MFG Part #: 45W60 Compare
Volts: 208/230, Nominal Tonnage: 6, Liquid Line O.D. (Sweat): (1) 5/8", Suction/Vapor Line O.D. (Sweat): (1) 1-1/8", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Evaporator Coil Net Face Area - Sq. ft.: 8.2, Evaporator Coil Tube Diameter: 3/8", Evaporator Coil number of Rows: 3, Evaporator Coil Fins per Inch: 14, Filter Number and Size - Inches: (3) 16 x 25 x 2 APPLICATIONS, Convertible upflow or horizontal design., Each refrigerant circuit has a dedicated expansion valve., Dual distribution system for two stage capacity control during cooling cycles., Air handlers are shipped factory assembled ready to install. Standard static blower drive is furnished factory installed., REFRIGERANT SYSTEM, Multi-Circuit, Copper Tube Coil, Coils on 090-120 models are face split with separate circuits, each circuit has its own expansion valve., Coil is constructed of aluminum fins fitted to durable seamless, rifled copper tubes., Flared tubing connections and silver soldering provide tight, leakproof joints., Refrigerant Piping and Drain Connections, Refrigerant line inlets (knockouts) are provided on both sides of the cabinet., Refrigerant lines require sweat connections and are made internal to the cabinet., Condensate drain outlet extends outside the cabinet for ease of connection. Condensate drain can be relocated and repositioned., BELT DRIVE BLOWERS, Single blower wheel., Centrifugal belt driven blowers deliver large air volumes quietly and with low power consumption., Heavy-duty blower wheels, with forward curved blades and double inlet are statically and dynamically balanced., Heavy-duty bearings are permanently sealed and lubricated., CABINET, Cabinet is constructed of heavy-gauge, galvanized steel completely lined with thick fiberglass insulation for quiet and efficient operation., Drain Pan, Deep, corrosion resistant plastic drain pan.
L4336.jpg45W64 TAA090S4DY 7.5T R410A 208/230V UP/HZ 3PH
Locke Part #: L4337MFG Part #: 45W64 Compare
Volts: 208/230, Nominal Tonnage: 7.5, Liquid Line O.D. (Sweat): (2) 5/8", Suction/Vapor Line O.D. (Sweat): (2) 7/8", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Evaporator Coil Net Face Area - Sq. ft.: 8.2, Evaporator Coil Tube Diameter: 3/8", Evaporator Coil number of Rows: 4, Evaporator Coil Fins per Inch: 14, Filter Number and Size - Inches: (3) 16 x 25 x 2, Evaporator Coil Split Coil: 50% APPLICATIONS, Convertible upflow or horizontal design., Each refrigerant circuit has a dedicated expansion valve., Dual distribution system for two stage capacity control during cooling cycles., Air handlers are shipped factory assembled ready to install. Standard static blower drive is furnished factory installed., REFRIGERANT SYSTEM, Multi-Circuit, Copper Tube Coil, Coils on 090-120 models are face split with separate circuits, each circuit has its own expansion valve., Coil is constructed of aluminum fins fitted to durable seamless, rifled copper tubes., Flared tubing connections and silver soldering provide tight, leakproof joints., Refrigerant Piping and Drain Connections, Refrigerant line inlets (knockouts) are provided on both sides of the cabinet., Refrigerant lines require sweat connections and are made internal to the cabinet., Condensate drain outlet extends outside the cabinet for ease of connection. Condensate drain can be relocated and repositioned., BELT DRIVE BLOWERS, Single blower wheel., Centrifugal belt driven blowers deliver large air volumes quietly and with low power consumption., Heavy-duty blower wheels, with forward curved blades and double inlet are statically and dynamically balanced., Heavy-duty bearings are permanently sealed and lubricated., CABINET, Cabinet is constructed of heavy-gauge, galvanized steel completely lined with thick fiberglass insulation for quiet and efficient operation., Drain Pan, Deep, corrosion resistant plastic drain pan.
L4336.jpgTAA090S4DG 7.5T AH 460V R410A
Locke Part #: L4338MFG Part #: TAA090S4D-G Compare
Volts: 460, Nominal Tonnage: 7.5, Liquid Line O.D. (Sweat): (2) 5/8", Suction/Vapor Line O.D. (Sweat): (2) 7/8", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Evaporator Coil Net Face Area - Sq. ft.: 8.2, Evaporator Coil Tube Diameter: 3/8", Evaporator Coil number of Rows: 4, Evaporator Coil Fins per Inch: 14, Filter Number and Size - Inches: (3) 16 x 25 x 2, Evaporator Coil Split Coil: 50% APPLICATIONS, Convertible upflow or horizontal design., Each refrigerant circuit has a dedicated expansion valve., Dual distribution system for two stage capacity control during cooling cycles., Air handlers are shipped factory assembled ready to install. Standard static blower drive is furnished factory installed., REFRIGERANT SYSTEM, Multi-Circuit, Copper Tube Coil, Coils on 090-120 models are face split with separate circuits, each circuit has its own expansion valve., Coil is constructed of aluminum fins fitted to durable seamless, rifled copper tubes., Flared tubing connections and silver soldering provide tight, leakproof joints., Refrigerant Piping and Drain Connections, Refrigerant line inlets (knockouts) are provided on both sides of the cabinet., Refrigerant lines require sweat connections and are made internal to the cabinet., Condensate drain outlet extends outside the cabinet for ease of connection. Condensate drain can be relocated and repositioned., BELT DRIVE BLOWERS, Single blower wheel., Centrifugal belt driven blowers deliver large air volumes quietly and with low power consumption., Heavy-duty blower wheels, with forward curved blades and double inlet are statically and dynamically balanced., Heavy-duty bearings are permanently sealed and lubricated., CABINET, Cabinet is constructed of heavy-gauge, galvanized steel completely lined with thick fiberglass insulation for quiet and efficient operation., Drain Pan, Deep, corrosion resistant plastic drain pan.
L4336.jpgTAA120S4DY 10T A/H 208/230V R410A
Locke Part #: L4339MFG Part #: 45W68 Compare
Volts: 208/230, Nominal Tonnage: 10, Liquid Line O.D. (Sweat): (2) 5/8", Suction/Vapor Line O.D. (Sweat): (2) 7/8", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Evaporator Coil Net Face Area - Sq. ft.: 11.3, Evaporator Coil Tube Diameter: 3/8", Evaporator Coil number of Rows: 4, Evaporator Coil Fins per Inch: 14, Filter Number and Size - Inches: (4) 16 x 25 x 2, Evaporator Coil Split Coil: 50% APPLICATIONS, Convertible upflow or horizontal design., Each refrigerant circuit has a dedicated expansion valve., Dual distribution system for two stage capacity control during cooling cycles., Air handlers are shipped factory assembled ready to install. Standard static blower drive is furnished factory installed., REFRIGERANT SYSTEM, Multi-Circuit, Copper Tube Coil, Coils on 090-120 models are face split with separate circuits, each circuit has its own expansion valve., Coil is constructed of aluminum fins fitted to durable seamless, rifled copper tubes., Flared tubing connections and silver soldering provide tight, leakproof joints., Refrigerant Piping and Drain Connections, Refrigerant line inlets (knockouts) are provided on both sides of the cabinet., Refrigerant lines require sweat connections and are made internal to the cabinet., Condensate drain outlet extends outside the cabinet for ease of connection. Condensate drain can be relocated and repositioned., BELT DRIVE BLOWERS, Single blower wheel., Centrifugal belt driven blowers deliver large air volumes quietly and with low power consumption., Heavy-duty blower wheels, with forward curved blades and double inlet are statically and dynamically balanced., Heavy-duty bearings are permanently sealed and lubricated., CABINET, Cabinet is constructed of heavy-gauge, galvanized steel completely lined with thick fiberglass insulation for quiet and efficient operation., Drain Pan, Deep, corrosion resistant plastic drain pan.
L4336.jpg45W69 TAA120S4DG 10TAH 460V R410A
Locke Part #: L4340MFG Part #: 45W69 Compare
Volts: 460, Nominal Tonnage: 10, Liquid Line O.D. (Sweat): (2) 5/8", Suction/Vapor Line O.D. (Sweat): (2) 7/8", Condensate Drain (FPT): 1" (NPT), Refrigerant (Not Furnished): R-410A, Evaporator Coil Net Face Area - Sq. ft.: 11.3, Evaporator Coil Tube Diameter: 3/8", Evaporator Coil number of Rows: 4, Evaporator Coil Fins per Inch: 14, Filter Number and Size - Inches: (4) 16 x 25 x 2, Evaporator Coil Split Coil: 50% APPLICATIONS, Convertible upflow or horizontal design., Each refrigerant circuit has a dedicated expansion valve., Dual distribution system for two stage capacity control during cooling cycles., Air handlers are shipped factory assembled ready to install. Standard static blower drive is furnished factory installed., REFRIGERANT SYSTEM, Multi-Circuit, Copper Tube Coil, Coils on 090-120 models are face split with separate circuits, each circuit has its own expansion valve., Coil is constructed of aluminum fins fitted to durable seamless, rifled copper tubes., Flared tubing connections and silver soldering provide tight, leakproof joints., Refrigerant Piping and Drain Connections, Refrigerant line inlets (knockouts) are provided on both sides of the cabinet., Refrigerant lines require sweat connections and are made internal to the cabinet., Condensate drain outlet extends outside the cabinet for ease of connection. Condensate drain can be relocated and repositioned., BELT DRIVE BLOWERS, Single blower wheel., Centrifugal belt driven blowers deliver large air volumes quietly and with low power consumption., Heavy-duty blower wheels, with forward curved blades and double inlet are statically and dynamically balanced., Heavy-duty bearings are permanently sealed and lubricated., CABINET, Cabinet is constructed of heavy-gauge, galvanized steel completely lined with thick fiberglass insulation for quiet and efficient operation., Drain Pan, Deep, corrosion resistant plastic drain pan.
Product Image Not Available46W51 15KW HT STRP 208/230V
Locke Part #: L4341MFG Part #: 46W51 Compare
Product Image Not Available25 kW 460 Volt Heat Strips for TA Air Handlers
Locke Part #: L4343MFG Part #: 46W57 Compare
Product Image Not AvailableFor 2-6 Ton KG-KC-KH Package Units
Locke Part #: L4344MFG Part #: 41W33 Compare
Product Image Not AvailableFor 7.5-12.5 Ton KG-KC-KH Package Units
Locke Part #: L4345MFG Part #: 54W16 Compare
Product Image Not AvailableKCA180S4BN G 15 TON 460V 3PH COOL ONLY
Locke Part #: L4346MFG Part #: Z3972 Compare
Volt: 208/230, Tonnage: 6
Volt: 208/230, Tonnage: 7.5
L4352.jpg7.5 Ton 460V TSA Split System Air Conditioners
Locke Part #: L4354MFG Part #: 45W05 Compare
Volt: 460, Tonnage: 7.5
Volt: 208/230, Tonnage: 10
L4352.jpg10 Ton 460V TSA Split System Air Conditioners
Locke Part #: L4356MFG Part #: 45W09 Compare
Volt: 460, Tonnage: 10
Product Image Not AvailableFor 024-090 (2 - 7-1/2 Ton) KG, KC, KH
Locke Part #: L4360MFG Part #: 53W78 Compare
Product Image Not AvailableFor 092-150 (7-1/2 - 12-1/2 Ton) KG, KC, KH
Locke Part #: L4361MFG Part #: 53W80 Compare
Product Image Not Available14W33 15KW 1PH HT STRIP
Locke Part #: L4364MFG Part #: 14W33 Compare
Product Image Not Available53W94 30KW 460V 3PH STRIP HEAT
Locke Part #: L4373MFG Part #: 53W94 Compare
Tons: 4 Ton COOLING / HEATING SYSTEM, Designed to maximize sensible and latent cooling performance at design conditions. System can operate from 30 F to 125 F without any additional controls., Refrigerant, Non-chlorine, ozone friendly R-410A. Unit pre-charged with refrigerant., Compressor, Scroll compressors resiliently mounted on rubber grommets for high performance, reliability and quiet operation., Compressor Crankcase Heater, Protects against refrigerant migration that can occur during low ambient operation., High Pressure Switch Check/Thermal Expansion Valves Reversing Valves, 4-way interchange reversing valve effects a rapid change in direction of refrigerant flow resulting in quick changeover., Defrost Control, Provides a defrost cycle, if needed, every 30 or 60 or 90 minutes (adjustable)., Filter/Drier Freezestat, Protects the evaporator coil from damaging ice build-up., Coil Construction, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested. Indoor Coil Cross row circuiting with rifled copper tubing., Outdoor Coil, Two independent formed coils allow separation for cleaning., Condensate Drain Pan, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1. Side or bottom drain connections. Reversible., Outdoor Coil Fan Motor, Thermal overload protected, totally enclosed, shaft up, wire basket mount. Outdoor Coil Fan PVC coated fan guard furnished., CABINET, Construction, Heavy-gauge galvanized steel panels with a two-layer enamel paint finish and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Air-Flow Choice, Units are shipped in down-flow (vertical) configuration, can be field converted to horizontal air flow configuration without a kit., Power Entry, Through the base or horizontal knock- outs., Insulation, All panels adjacent to conditioned air are fully insulated with non-hygroscopic fiberglass insulation. Base is fully insulated., CONTROLS, Unit Control, All control voltage is provided via a 24V (secondary) transformer with built-in circuit breaker protection., Heat/Cool Staging, - Capable of up to 2 heat / 2 cool staging with a third party DDC control system or thermostat., Low Voltage Terminal Block, - Provides screw terminal connections for thermostat or controller wiring. Night Setback Mode - Saves energy by closing outdoor air dampers and operating supply fan on thermostat demand only., BLOWER, A wide selection of supply air blower options are available to meet a variety of air flow requirements., Motor, Supply Air Blower, Forward curved blades, blower wheel is statically and dynamically balanced. All belt drive motors have adjustable pulley for speed change., Indoor Air Quality -, Disposable 2 inch air filters furnished., Net Cooling Capacity 47,000 to 59,000 Btuh, Net Heating Capacity 48,000 to 60,500 Btuh, Optional Electric Heat 7.5 to 30 kW
Tons: 5 Ton COOLING / HEATING SYSTEM, Designed to maximize sensible and latent cooling performance at design conditions. System can operate from 30 F to 125 F without any additional controls., Refrigerant, Non-chlorine, ozone friendly R-410A. Unit pre-charged with refrigerant., Compressor, Scroll compressors resiliently mounted on rubber grommets for high performance, reliability and quiet operation., Compressor Crankcase Heater, Protects against refrigerant migration that can occur during low ambient operation., High Pressure Switch Check/Thermal Expansion Valves Reversing Valves, 4-way interchange reversing valve effects a rapid change in direction of refrigerant flow resulting in quick changeover., Defrost Control, Provides a defrost cycle, if needed, every 30 or 60 or 90 minutes (adjustable)., Filter/Drier Freezestat, Protects the evaporator coil from damaging ice build-up., Coil Construction, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested. Indoor Coil Cross row circuiting with rifled copper tubing., Outdoor Coil, Two independent formed coils allow separation for cleaning., Condensate Drain Pan, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1. Side or bottom drain connections. Reversible., Outdoor Coil Fan Motor, Thermal overload protected, totally enclosed, shaft up, wire basket mount. Outdoor Coil Fan PVC coated fan guard furnished., CABINET, Construction, Heavy-gauge galvanized steel panels with a two-layer enamel paint finish and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Air-Flow Choice, Units are shipped in down-flow (vertical) configuration, can be field converted to horizontal air flow configuration without a kit., Power Entry, Through the base or horizontal knock- outs., Insulation, All panels adjacent to conditioned air are fully insulated with non-hygroscopic fiberglass insulation. Base is fully insulated., CONTROLS, Unit Control, All control voltage is provided via a 24V (secondary) transformer with built-in circuit breaker protection., Heat/Cool Staging, - Capable of up to 2 heat / 2 cool staging with a third party DDC control system or thermostat., Low Voltage Terminal Block, - Provides screw terminal connections for thermostat or controller wiring. Night Setback Mode - Saves energy by closing outdoor air dampers and operating supply fan on thermostat demand only., BLOWER, A wide selection of supply air blower options are available to meet a variety of air flow requirements., Motor, Supply Air Blower, Forward curved blades, blower wheel is statically and dynamically balanced. All belt drive motors have adjustable pulley for speed change., Indoor Air Quality -, Disposable 2 inch air filters furnished., Net Cooling Capacity 47,000 to 59,000 Btuh, Net Heating Capacity 48,000 to 60,500 Btuh, Optional Electric Heat 7.5 to 30 kW
Tonnage: 7.5, Outdoor Coil Net Face Area Sq. Ft.: 20.42, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7200, Line voltage data - 60 hz: 208/230V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge.
L4390.jpg7.5 Ton 460V 3PH Gas/Electric Packaged Units
Locke Part #: L4391MFG Part #: V9158 Compare
Tonnage: 7.5, Outdoor Coil Net Face Area Sq. Ft.: 20.42, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7200, Line voltage data - 60 hz: 460V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge.
Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800, Line voltage data - 60 hz: 208/230V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge.
L4390.jpg10 Ton 460V 3PH Gas/Electric Packaged Units
Locke Part #: L4393MFG Part #: V9176 Compare
Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800, Line voltage data - 60 hz: 460V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge.
Volts: 208/230, Phase: 3, Tonnage: 15, Outdoor Coil Net Face Area Sq. Ft.: 41.4, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (3) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 1100, Outdoor Fans Diameter in.- No. of Blades: (3) 24, Outdoor Fans Total Air Volume - CFM: 12000 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007, All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Copper tube Coil construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections, Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount, Outdoor Coil Fans PVC coated fan guard furnished.
L4394.jpg15 Ton 3PH 460V Gas/Electric Packaged Units
Locke Part #: L4395MFG Part #: Z3941 Compare
Volts: 460, Phase: 3, Tonnage: 15, Outdoor Coil Net Face Area Sq. Ft.: 41.4, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (3) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 1100, Outdoor Fans Diameter in.- No. of Blades: (3) 24, Outdoor Fans Total Air Volume - CFM: 12000 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007, All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Copper tube Coil construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections, Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount, Outdoor Coil Fans PVC coated fan guard furnished.
Voltage: 208/230V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 7700, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 10.8, Gross Cooling Capacity - Btuh: 238,000, Heating Type: Standard Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.0, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 228,000, Nominal Cooling Capacity: 20 Tons, Total Unit Power - kW: 21.1, Unit Type: Packaged Gas Heat w/ Electric Cooling Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System - Smaller, lighter condenser coil., Crankcase Heaters - Protect compressors from refrigerant liquid migration in the off cycle improving product reliability, High Pressure Switches - Protects compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Independent Outdoor Fan Motor Mounts - Allows for easy and efficient service access without removing the top panel., Constant Air Volume (CAV) or Single Zone VAV Supply Fan Blower Option - Allows constant or multi-staged air delivery, Downflow Airflow - Horizontal airflow with optional horizontal curb., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves - Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits.
Voltage: 460V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 7700, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 10.8, Gross Cooling Capacity - Btuh: 238,000, Heating Type: Standard Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.0, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 228,000, Nominal Cooling Capacity: 20 Tons, Total Unit Power - kW: 21.1, Unit Type: Packaged Gas Heat w/ Electric Cooling Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System - Smaller, lighter condenser coil., Crankcase Heaters - Protect compressors from refrigerant liquid migration in the off cycle improving product reliability, High Pressure Switches - Protects compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Independent Outdoor Fan Motor Mounts - Allows for easy and efficient service access without removing the top panel., Constant Air Volume (CAV) or Single Zone VAV Supply Fan Blower Option - Allows constant or multi-staged air delivery, Downflow Airflow - Horizontal airflow with optional horizontal curb., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves - Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits.
L4398.jpg7.5 Ton 3PH 208/230V Electric Packaged Units
Locke Part #: L4398MFG Part #: V9147 Compare
Phase: 3, Volt: 208/230, Tonnage: 7.5, Outdoor Coil Net Face Area Sq. Ft.: 20.42, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7200 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007., All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Optional Factory or Field Installed, Helix wound nichrome elements, Individual element limit controls, Wiring harness, Unit fuse block is furnished as standard, Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity., Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections., Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Base rails have rigging holes., Three sides of the base rail have forklift slots., Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building., Units are shipped in downflow (vertical) configuration, can be field converted to horizontal airflow with optional Horizontal Discharge Kit., All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation., Unit base is fully insulated. The insulation also serves as an air seal to the roof curb, eliminating the need to add a seal during installation.
L4398.jpg7.5 Ton 3PH 460V Electric Packaged Units
Locke Part #: L4399MFG Part #: V9145 Compare
Phase: 3, Volt: 460, Tonnage: 7.5, Outdoor Coil Net Face Area Sq. Ft.: 20.42, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7200 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007., All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Optional Factory or Field Installed, Helix wound nichrome elements, Individual element limit controls, Wiring harness, Unit fuse block is furnished as standard, Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity., Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections., Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Base rails have rigging holes., Three sides of the base rail have forklift slots., Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building., Units are shipped in downflow (vertical) configuration, can be field converted to horizontal airflow with optional Horizontal Discharge Kit., All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation., Unit base is fully insulated. The insulation also serves as an air seal to the roof curb, eliminating the need to add a seal during installation.
L4398.jpg10 Ton 3PH 208/230V Electric Packaged Units
Locke Part #: L4400MFG Part #: V9153 Compare
Phase: 3, Volt: 208/230, Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007., All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Optional Factory or Field Installed, Helix wound nichrome elements, Individual element limit controls, Wiring harness, Unit fuse block is furnished as standard, Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity., Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections., Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Base rails have rigging holes., Three sides of the base rail have forklift slots., Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building., Units are shipped in downflow (vertical) configuration, can be field converted to horizontal airflow with optional Horizontal Discharge Kit., All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation., Unit base is fully insulated. The insulation also serves as an air seal to the roof curb, eliminating the need to add a seal during installation.
L4398.jpg10 Ton 3PH 460V Electric Packaged Units
Locke Part #: L4401MFG Part #: V9151 Compare
Phase: 3, Volt: 460, Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007., All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Optional Factory or Field Installed, Helix wound nichrome elements, Individual element limit controls, Wiring harness, Unit fuse block is furnished as standard, Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity., Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections., Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Base rails have rigging holes., Three sides of the base rail have forklift slots., Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building., Units are shipped in downflow (vertical) configuration, can be field converted to horizontal airflow with optional Horizontal Discharge Kit., All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation., Unit base is fully insulated. The insulation also serves as an air seal to the roof curb, eliminating the need to add a seal during installation.
Product Image Not AvailableEconomizer for 7-1/2 - 12-1/2 Ton KG, KC, KH
Locke Part #: L4403MFG Part #: 13U45 Compare
Product Image Not AvailableHail Guard for 7-1/2 - 10 Ton KH
Locke Part #: L4408MFG Part #: 13T24 Compare
Product Image Not AvailableEconomizer & Hood for 15 - 25 Ton KG, KC, KH
Locke Part #: L4411MFG Part #: 54W77 Compare
Product Image Not AvailableHail Guards for KGA092-KGA150 Roof-Top Units
Locke Part #: L4459MFG Part #: 13T05 Compare
Voltage: 208/230V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 2450, Blower Type: Belt Drive, Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.2, Gross Cooling Capacity - Btuh: 72,500, Heating Type: High Gas Heat, 2 Stage, IEER (Btuh/Watt): 12.3, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 69,000, Nominal Cooling Capacity: 6 Tons, Total Unit Power - kW: 6.1, Unit Type: Packaged Gas Heat w/ Electric Cooling, Sound Rating Number (SRN)((dBA): 79 R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System (All KGB Models and KGA072 and 090 Models) - Smaller, lighter condenser coil with improved heat transfer., High Pressure Switches - Protect compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Direct or Belt Drive Blower Motors - Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel., Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved Serviceability., Thermostatic Expansion Valves (All KGB Models and KGA036, 048 and 060 Models) - Provide peak cooling performance across the entire application range.
Product Image Not AvailableLGA/TGA to KGA Adapter
Locke Part #: L4475MFG Part #: 54W96 Compare
Tonnage: 12.5, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 3, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/2hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 830, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 8800, Line voltage data - 60 hz: 208/230V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge.
L4390.jpg12.5 Ton 460V 3PH Gas/Electric Packaged Units
Locke Part #: L4480MFG Part #: V9196 Compare
Tonnage: 12.5, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 3, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/2hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 830, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 8800, Line voltage data - 60 hz: 460V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge.
Product Image Not AvailableHail Guards for KCA072 & KHA060 Roof-Top Units
Locke Part #: L4481MFG Part #: 13T03 Compare
L4490.jpg6 Ton 3PH 208/230V Gas/Electric Packaged Units
Locke Part #: L4490MFG Part #: AC320 Compare
Phase: 3, Volt: 208/230, Tonnage: 6, Outdoor Coil Net Face Area Sq. Ft.: 19.3, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 405, Outdoor Fans Diameter in.- No. of Blades: 24-3, Outdoor Fans Total Air Volume - CFM: 4800 Standard Features, R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel, Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Reversible Drain Pan Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves - Provide peak cooling performance across the entire application range., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity, Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections, Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount, Outdoor Coil Fans PVC coated fan guard furnished.
L4490.jpg6 Ton 3PH 460V Gas/Electric Packaged Units
Locke Part #: L4491MFG Part #: AD585 Compare
Phase: 3, Volt: 460, Tonnage: 6, Outdoor Coil Net Face Area Sq. Ft.: 19.3, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 405, Outdoor Fans Diameter in.- No. of Blades: 24-3, Outdoor Fans Total Air Volume - CFM: 4800 Standard Features, R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel, Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Reversible Drain Pan Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves - Provide peak cooling performance across the entire application range., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity, Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections, Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount, Outdoor Coil Fans PVC coated fan guard furnished.
Product Image Not AvailableHail Guard for TSA 072 & 090
Locke Part #: L4494MFG Part #: 13T29 Compare
Product Image Not AvailableHail Guard for TSA 120
Locke Part #: L4495MFG Part #: 13T30 Compare
L4303.jpgGas/Electric Packaged Units
Locke Part #: L4496MFG Part #: L0915 Compare
Approvals, ETL and CSA listed, Efficiency rating verified by GAMA., Components bonded for grounding to meet safety standards for servicing required by UL., Certified in accordance with the USE certification program, which is based on ARI Standard 210/240-2006, All models are ASHRAE 90.1 compliant., All models are ENERGY STAR certified, ISO 9001 Registered manufacturing quality system., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Electrical and gas lines can be brought through the unit base or through horizontal access knock-outs. Optional bottom gas entry kit is available., Access panels are provided for the economizer/filter section, heating/blower section, and the compressor/controls section., Cooling system, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 f to 125 f without any additional controls., Compressor resiliently mounted on rubber grommets for quiet operation., Scroll compressors for high performance, reliability and quiet operation., Thermal expansion valve assures optimal performance throughout the application range. Removable element head., High pressure switch protects the compressor from overload conditions such as dirty condenser coils, blockedrefrigerant flow, or loss of outdoor fan operation., High capacity filter/drier protects from dirt and moisture, Freezestat protects the evaporator coil from damaging ice build-up due to conditions such as low/no air flow, or low refrigerant charge., Copper tube coil construction, enhanced rippled-edgealuminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator coil with cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity, Two independent formed condenser coils allow separation for cleaning., Plastic condensate drain pan, sloped to meet drainage requirements of ASHRAE 62.1. Side or bottom drain connections. Reversible to allow connection at back of unit., PVC coated fan guard furnished.
Voltage: 460V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 8750, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 10.0, Gross Cooling Capacity - Btuh: 282,000, Heating Type: Standard Gas Heat, 2 Stage, IEER (Btuh/Watt): 10.0, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 270,000, Nominal Cooling Capacity: 25 Tons, Total Unit Power - kW: 27.0, Unit Type: Packaged Gas Heat w/ Electric Cooling Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System - Smaller, lighter condenser coil., Crankcase Heaters - Protect compressors from refrigerant liquid migration in the off cycle improving product reliability, High Pressure Switches - Protects compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Independent Outdoor Fan Motor Mounts - Allows for easy and efficient service access without removing the top panel., Constant Air Volume (CAV) or Single Zone VAV Supply Fan Blower Option - Allows constant or multi-staged air delivery, Downflow Airflow - Horizontal airflow with optional horizontal curb., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves - Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits.
Voltage: 208/230V−1 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 1140, Blower Type: Direct Drive, Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 12.5, Gross Cooling Capacity - Btuh: 38,500, Heating Type: Medium Gas Heat, 1 stage, Major Design Sequence: 2nd Generation, Net Cooling Capacity - Btuh: 37,200, Nominal Cooling Capacity: 3 Tons, Total Unit Power - kW: 2.9, Unit Type: Packaged Gas Heat w/ Electric Cooling, Sound Rating Number (SRN)((dBA): 74, SEER (Btuh/Watt): 14.0 R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System (All KGB Models and KGA072 and 090 Models) - Smaller, lighter condenser coil with improved heat transfer, High Pressure Switches - Protect compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Direct or Belt Drive Blower Motors - Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel, Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves (All KGB Models and KGA036, 048 and 060 Models) - Provide peak cooling performance across the entire application range.
Voltage: 208/230V−1 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 1600, Blower Type: Direct Drive, Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.5, Gross Cooling Capacity - Btuh: 49,700, Heating Type: High Gas Heat, 2 Stage, Major Design Sequence: 2nd Generation, Net Cooling Capacity - Btuh: 47,500, Nominal Cooling Capacity: 4 Tons, Total Unit Power - kW: 4.1, Unit Type: Packaged Gas Heat w/ Electric Cooling, Sound Rating Number (SRN)((dBA): 74, SEER (Btuh/Watt): 14.0 R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System (All KGB Models and KGA072 and 090 Models) - Smaller, lighter condenser coil with improved heat transfer, High Pressure Switches - Protect compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Direct or Belt Drive Blower Motors - Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel, Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves (All KGB Models and KGA036, 048 and 060 Models) - Provide peak cooling performance across the entire application range.
Voltage: 208/230V−1 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 1760, Blower Type: Direct Drive, Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.8, Gross Cooling Capacity - Btuh: 61,900, Heating Type: High Gas Heat, 2 Stage, Major Design Sequence: 2nd Generation, Net Cooling Capacity - Btuh: 59,500, Nominal Cooling Capacity: 5 Tons, Total Unit Power - kW: 5.0, Unit Type: Packaged Gas Heat w/ Electric Cooling, Sound Rating Number (SRN)((dBA): 79, SEER (Btuh/Watt): 14.0 R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System (All KGB Models and KGA072 and 090 Models) - Smaller, lighter condenser coil with improved heat transfer, High Pressure Switches - Protect compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Direct or Belt Drive Blower Motors - Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel, Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle., Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves (All KGB Models and KGA036, 048 and 060 Models) - Provide peak cooling performance across the entire application range.
Voltage: 208/230V−1 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 1600, Blower Type: Direct Drive, Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.5, Gross Cooling Capacity - Btuh: 49,700, Major Design Sequence: 2nd Generation, Net Cooling Capacity - Btuh: 47,500, Nominal Cooling Capacity: 4 Tons, Total Unit Power - kW: 4.1, Unit Type: Packaged Gas Heat w/ Electric Cooling, Sound Rating Number (SRN)((dBA): 74, SEER (Btuh/Watt): 14.0 R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System (All KCB Models and KCA072 and 090 Models) - Smaller, lighter condenser coil with improved heat transfer, High Pressure Switches - Protect compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Direct or Belt Drive Blower Motors - Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel. Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle. Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves (All KCB Models and KCA036, 048 and 060 Models) - Provide peak cooling performance across the entire application range.
Voltage: 208/230V−1 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 1760, Blower Type: Direct Drive, Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.8, Gross Cooling Capacity - Btuh: 61,900, Major Design Sequence: 2nd Generation, Net Cooling Capacity - Btuh: 59,500, Nominal Cooling Capacity: 5 Tons, Total Unit Power - kW: 5.0, Unit Type: Packaged Gas Heat w/ Electric Cooling, Sound Rating Number (SRN)((dBA): 79, SEER (Btuh/Watt): 14.0 R-410A Refrigerant - Environmentally friendly., Scroll Compressors - Single speed scroll compressors are furnished on all models., Eco-last Coil System (All KCB Models and KCA072 and 090 Models) - Smaller, lighter condenser coil with improved heat transfer, High Pressure Switches - Protect compressor., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Direct or Belt Drive Blower Motors - Direct drive (024, 030, 036, 048 and 060 models). Belt drive motors (036, 048, 060, 072 and 090 models) to maximize air performance., Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel. Downflow or Horizontal Airflow - Easy field conversion., Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle. Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved serviceability., Thermostatic Expansion Valves (All KCB Models and KCA036, 048 and 060 Models) - Provide peak cooling performance across the entire application range.
Tonnage: 4, Outdoor Coil Net Face Area Sq. Ft.: 12.8, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 1, Outdoor Coil Fins per inch: 23, Outdoor Fans Motor Horsepower: (1) 1/4 (PSC), Outdoor Fans Motor rpm: 825, Outdoor Fans Total Motor watts: 310, Outdoor Fans Total Air Volume - CFM: 3300, Indoor Blower & Drive Nominal Motor HP: 1 hp, 1.5 hp, Line Voltage Data - 60 hz: 208/230V / 3PH, Outdoor Fans Diameter in.: (1) 22
L9601.jpg4 Ton 460V / 3PH Gas/Electric Packaged Units
Locke Part #: L9605MFG Part #: L1898 Compare
Tonnage: 4, Outdoor Coil Net Face Area Sq. Ft.: 12.8, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 1, Outdoor Coil Fins per inch: 23, Outdoor Fans Motor Horsepower: (1) 1/4 (PSC), Outdoor Fans Motor rpm: 825, Outdoor Fans Total Motor watts: 310, Outdoor Fans Total Air Volume - CFM: 3300, Indoor Blower & Drive Nominal Motor HP: 1 hp, 1.5 hp, Line Voltage Data - 60 hz: 460V / 3PH, Outdoor Fans Diameter in.: (1) 22
L9609.jpg3 Ton 208/230V / 3PH Electric Package Units
Locke Part #: L9609MFG Part #: V9625 Compare
Type: Disposable, Tonnage: 3, Line Voltage Data - 60 hz: 208/230V / 3PH, Net Face Area Sq. Ft.: 12.8, Tube Diameter in.: 3/8, Number of Rows: 1, Fins per inch: 23, Motor Horsepower: (1) 1/6 (PSC), Motor rpm: 825, Total Motor watts: 200, Diameter in.: (1) 22, Total Air Volume - CFM: 2700, Nominal Motor HP: 1 hp, 1.5 hp, Wheel Nominal Diameter x Width - in.: 10 x 10, Number and Size - in.: (4) 14 x 20 x 2 Approvals, AHRI Certified to AHRI Standard 210/240-2008. CSA listed, Units are Certified by CSA., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes., All models are ASHRAE 90.1 compliant., ISO 9001 Registered Manufacturing Quality System., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 35 F to 125 F without any additional controls., R-410a Refrigerant, Non-chlorine, ozone friendly, R-410A., Unit is factory pre-charged with refrigerant. See Specifications Table., compressor, Resiliently mounted on rubber grommets for quiet operation., Scroll compressors for high performance, reliability and quiet operation., High Pressure Switch, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Drier, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil, Condensate Drain pan, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1., End drain connection., Outdoor Coil Fan Motor, Thermal overload protected, totally enclosed, permanently lubricated bearings, shaft down, fan guard mount., Outdoor Coil Fan Guard, PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components.
L9609.jpg4 Ton 208/230V / 3PH Electric Package Units
Locke Part #: L9611MFG Part #: V9628 Compare
Type: Disposable, Tonnage: 4, Line Voltage Data - 60 hz: 208/230V / 3PH, Net Face Area Sq. Ft.: 12.8, Tube Diameter in.: 3/8, Number of Rows: 1, Fins per inch: 23, Motor Horsepower: (1) 1/4 (PSC), Motor rpm: 825, Total Motor watts: 310, Diameter in.: (1) 22, Total Air Volume - CFM: 3300, Nominal Motor HP: 1 hp, 1.5 hp, Wheel Nominal Diameter x Width - in.: 10 x 10, Number and Size - in.: (4) 14 x 20 x 2 Approvals, AHRI Certified to AHRI Standard 210/240-2008. CSA listed, Units are Certified by CSA., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes., All models are ASHRAE 90.1 compliant., ISO 9001 Registered Manufacturing Quality System., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 35 F to 125 F without any additional controls., R-410a Refrigerant, Non-chlorine, ozone friendly, R-410A., Unit is factory pre-charged with refrigerant. See Specifications Table., compressor, Resiliently mounted on rubber grommets for quiet operation., Scroll compressors for high performance, reliability and quiet operation., High Pressure Switch, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Drier, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil, Condensate Drain pan, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1., End drain connection., Outdoor Coil Fan Motor, Thermal overload protected, totally enclosed, permanently lubricated bearings, shaft down, fan guard mount., Outdoor Coil Fan Guard, PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components.
L9615.jpg4 Ton 460V / 3PH Heat Pump Packaged Units
Locke Part #: L9618MFG Part #: V9672 Compare
Tonnage: 4, Outdoor Coil Net Face Area Sq. Ft.: 12.8, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 1, Outdoor Coil Fins per inch: 23, Outdoor Fans Motor Horsepower: (1) 1/4 (PSC), Outdoor Fans Motor rpm: 825, Outdoor Fans Total Motor watts: 310, Outdoor Fans Total Air Volume - CFM: 3300, Indoor Blower & Drive Nominal Motor HP: 1 hp, 1.5 hp, Line Voltage Data - 60 hz: 460V / 3PH, Outdoor Fans Diameter in.: (1) 22 COOLING / HEATING SYSTEM, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 35 F to 125 F without any additional controls., R-410A Refrigerant, Non-chlorine, ozone friendly, R-410A., Unit is factory pre-charged with refrigerant. See Specifications Table., Compressor, Resiliently mounted on rubber grommets for quiet operation., Scroll compressors for high performance, reliability and quiet operation., Compressor Crankcase Heater, Protects against refrigerant migration that can occur during low ambient operation., High pressure Switch, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Reversing Valve, 4-way interchange reversing valve effects a rapid change in direction of refrigerant flow resulting in quick changeover from cooling to heating and vice versa., Defrost Control, Provides a defrost cycle, if needed, every 30 or 60 or 90 minutes (adjustable) of compressor on time at outdoor coil temperature below 35 F. Temperature switch mounted on outdoor coil liquid line terminates defrost cycle., Filter/Drier, High capacity filter/drier protects the system from dirt and moisture., Coil Construction, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Indoor Coil, Cross row circuiting with rifled tubing optimizes both sensible and latent cooling capacity., Condensate Drain pan, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1., End drain connection., Outdoor Coil Fan Motor, Thermal overload protected, totally enclosed, permanently lubricated bearings, shaft down, fan guard mount., Outdoor Coil Fan Guard, PVC coated fan guard furnished., CABINET, Heavy-gauge steel panels and full perimeter heavy gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., WARRANTY, Limited five years on compressors., Limited one year all other covered components., APPROVALS, AHRI Certified to AHRI Standard 210/240-2008., CSA listed., Units are Certified by CSA., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes., All models are ASHRAE 90.1 compliant., ISO 9001 Registered Manufacturing Quality System.
L9615.jpg5 Ton 208/230V / 3PH Heat Pump Packaged Units
Locke Part #: L9619MFG Part #: V9673 Compare
Tonnage: 5, Outdoor Coil Net Face Area Sq. Ft.: 15.2, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 1, Outdoor Coil Fins per inch: 23, Outdoor Fans Motor Horsepower: (1) 1/3 (PSC), Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 360, Outdoor Fans Total Air Volume - CFM: 3800, Indoor Blower & Drive Nominal Motor HP: 1 hp, 1.5 hp, Line Voltage Data - 60 hz: 460V / 3PH, Outdoor Fans Diameter in.: (1) 22 COOLING / HEATING SYSTEM, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 35 F to 125 F without any additional controls., R-410A Refrigerant, Non-chlorine, ozone friendly, R-410A., Unit is factory pre-charged with refrigerant. See Specifications Table., Compressor, Resiliently mounted on rubber grommets for quiet operation., Scroll compressors for high performance, reliability and quiet operation., Compressor Crankcase Heater, Protects against refrigerant migration that can occur during low ambient operation., High pressure Switch, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Reversing Valve, 4-way interchange reversing valve effects a rapid change in direction of refrigerant flow resulting in quick changeover from cooling to heating and vice versa., Defrost Control, Provides a defrost cycle, if needed, every 30 or 60 or 90 minutes (adjustable) of compressor on time at outdoor coil temperature below 35 F. Temperature switch mounted on outdoor coil liquid line terminates defrost cycle., Filter/Drier, High capacity filter/drier protects the system from dirt and moisture., Coil Construction, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Indoor Coil, Cross row circuiting with rifled tubing optimizes both sensible and latent cooling capacity., Condensate Drain pan, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1., End drain connection., Outdoor Coil Fan Motor, Thermal overload protected, totally enclosed, permanently lubricated bearings, shaft down, fan guard mount., Outdoor Coil Fan Guard, PVC coated fan guard furnished., CABINET, Heavy-gauge steel panels and full perimeter heavy gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., WARRANTY, Limited five years on compressors., Limited one year all other covered components., APPROVALS, AHRI Certified to AHRI Standard 210/240-2008., CSA listed., Units are Certified by CSA., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes., All models are ASHRAE 90.1 compliant., ISO 9001 Registered Manufacturing Quality System.
L9615.jpg5 Ton 460V / 3PH Heat Pump Packaged Units
Locke Part #: L9620MFG Part #: V9674 Compare
Tonnage: 5, Outdoor Coil Net Face Area Sq. Ft.: 15.2, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 1, Outdoor Coil Fins per inch: 23, Outdoor Fans Motor Horsepower: (1) 1/3 (PSC), Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 360, Outdoor Fans Total Air Volume - CFM: 3800, Indoor Blower & Drive Nominal Motor HP: 1 hp, 1.5 hp, Line Voltage Data - 60 hz: 460V / 3PH, Outdoor Fans Diameter in.: (1) 22 COOLING / HEATING SYSTEM, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 35 F to 125 F without any additional controls., R-410A Refrigerant, Non-chlorine, ozone friendly, R-410A., Unit is factory pre-charged with refrigerant. See Specifications Table., Compressor, Resiliently mounted on rubber grommets for quiet operation., Scroll compressors for high performance, reliability and quiet operation., Compressor Crankcase Heater, Protects against refrigerant migration that can occur during low ambient operation., High pressure Switch, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Reversing Valve, 4-way interchange reversing valve effects a rapid change in direction of refrigerant flow resulting in quick changeover from cooling to heating and vice versa., Defrost Control, Provides a defrost cycle, if needed, every 30 or 60 or 90 minutes (adjustable) of compressor on time at outdoor coil temperature below 35 F. Temperature switch mounted on outdoor coil liquid line terminates defrost cycle., Filter/Drier, High capacity filter/drier protects the system from dirt and moisture., Coil Construction, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Indoor Coil, Cross row circuiting with rifled tubing optimizes both sensible and latent cooling capacity., Condensate Drain pan, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1., End drain connection., Outdoor Coil Fan Motor, Thermal overload protected, totally enclosed, permanently lubricated bearings, shaft down, fan guard mount., Outdoor Coil Fan Guard, PVC coated fan guard furnished., CABINET, Heavy-gauge steel panels and full perimeter heavy gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., WARRANTY, Limited five years on compressors., Limited one year all other covered components., APPROVALS, AHRI Certified to AHRI Standard 210/240-2008., CSA listed., Units are Certified by CSA., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes., All models are ASHRAE 90.1 compliant., ISO 9001 Registered Manufacturing Quality System.
Height: 14"
Voltage: 208/230V-3ph, kW: 15
Voltage: 460V-3ph, kW: 15
Voltage: 208/230V-3ph, kW: 22.5
Voltage: 460V-3ph, kW: 22.5
Voltage: 208/230V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 2,800, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.0, Gross Cooling Capacity - Btuh: 88,200, Heating Type: Medium Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.8, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 86,000, Nominal Cooling Capacity: 7.5 Tons, Total Unit Power - kW: 7.8, Unit Type: Packaged Gas Heat w/ Electric Cooling Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shut-off., Heat Exchanger :, Tubular construction, aluminized steel, life cycle tested., Electronic Pilot Ignition, Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Limit Control:, Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Safety Switches:, Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant:, Non-chlorine based, ozone friendly, R-410A., High Pressure Switches, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Driers:, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil:, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer., Condensate Drain Pan:, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1, Side drain connections., Outdoor Coil Fan Motors, Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans:, PVC coated fan guard furnished., Cabinet, Construction, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited ten years aluminized heat exchanger, limited fifteen years optional stainless steel heat exchanger, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components., Approvals, AHRI Certified to AHRI Standard 340/360-2007, Units are ETL listed., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes.
Voltage: 460V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 2,800, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.0, Gross Cooling Capacity - Btuh: 88,200, Heating Type: Medium Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.8, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 86,000, Nominal Cooling Capacity: 7.5 Tons, Total Unit Power - kW: 7.8, Unit Type: Packaged Gas Heat w/ Electric Cooling Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shut-off., Heat Exchanger :, Tubular construction, aluminized steel, life cycle tested., Electronic Pilot Ignition, Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Limit Control:, Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Safety Switches:, Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant:, Non-chlorine based, ozone friendly, R-410A., High Pressure Switches, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Driers:, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil:, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer., Condensate Drain Pan:, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1, Side drain connections., Outdoor Coil Fan Motors, Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans:, PVC coated fan guard furnished., Cabinet, Construction, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited ten years aluminized heat exchanger, limited fifteen years optional stainless steel heat exchanger, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components., Approvals, AHRI Certified to AHRI Standard 340/360-2007, Units are ETL listed., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes.
Voltage: 208/230V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 3,800, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.0, Gross Cooling Capacity - Btuh: 118,400, Heating Type: High Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.8, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 115,000, Nominal Cooling Capacity: 10 Tons, Total Unit Power - kW: 10.5, Unit Type: Packaged Gas Heat w/ Electric Cooling Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shut-off., Heat Exchanger :, Tubular construction, aluminized steel, life cycle tested., Electronic Pilot Ignition, Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Limit Control:, Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Safety Switches:, Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant:, Non-chlorine based, ozone friendly, R-410A., High Pressure Switches, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Driers:, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil:, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer., Condensate Drain Pan:, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1, Side drain connections., Outdoor Coil Fan Motors, Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans:, PVC coated fan guard furnished., Cabinet, Construction, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited ten years aluminized heat exchanger, limited fifteen years optional stainless steel heat exchanger, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components., Approvals, AHRI Certified to AHRI Standard 340/360-2007, Units are ETL listed., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes.
Voltage: 460V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 3,800, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 11.0, Gross Cooling Capacity - Btuh: 118,400, Heating Type: High Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.8, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 115,000, Nominal Cooling Capacity: 10 Tons, Total Unit Power - kW: 10.5, Unit Type: Packaged Gas Heat w/ Electric Cooling Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shut-off., Heat Exchanger :, Tubular construction, aluminized steel, life cycle tested., Electronic Pilot Ignition, Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Limit Control:, Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Safety Switches:, Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant:, Non-chlorine based, ozone friendly, R-410A., High Pressure Switches, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Driers:, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil:, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer., Condensate Drain Pan:, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1, Side drain connections., Outdoor Coil Fan Motors, Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans:, PVC coated fan guard furnished., Cabinet, Construction, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited ten years aluminized heat exchanger, limited fifteen years optional stainless steel heat exchanger, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components., Approvals, AHRI Certified to AHRI Standard 340/360-2007, Units are ETL listed., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes.
Voltage: 208/230V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 4,400, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 10.8, Gross Cooling Capacity - Btuh: 142,000, Heating Type: High Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.4, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 136,000, Nominal Cooling Capacity: 12.5 Tons, Total Unit Power - kW: 12.6, Unit Type: Packaged Gas Heat w/ Electric Cooling Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shut-off., Heat Exchanger :, Tubular construction, aluminized steel, life cycle tested., Electronic Pilot Ignition, Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Limit Control:, Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Safety Switches:, Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant:, Non-chlorine based, ozone friendly, R-410A., High Pressure Switches, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Driers:, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil:, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer., Condensate Drain Pan:, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1, Side drain connections., Outdoor Coil Fan Motors, Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans:, PVC coated fan guard furnished., Cabinet, Construction, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited ten years aluminized heat exchanger, limited fifteen years optional stainless steel heat exchanger, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components., Approvals, AHRI Certified to AHRI Standard 340/360-2007, Units are ETL listed., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes.
Voltage: 460V-3 phase-60hz, Refrigerant Type: R-410A, AHRI Rated Air Flow - cfm: 4,400, Blower Type: Belt Drive, Constant Air Volume (CAV), Cooling Efficiency: Standard Efficiency, EER (Btuh/Watt): 10.8, Gross Cooling Capacity - Btuh: 142,000, Heating Type: High Gas Heat, 2 Stage, IEER (Btuh/Watt): 11.4, Major Design Sequence: 1st Generation, Net Cooling Capacity - Btuh: 136,000, Nominal Cooling Capacity: 12.5 Tons, Total Unit Power - kW: 12.6, Unit Type: Packaged Gas Heat w/ Electric Cooling Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shut-off., Heat Exchanger :, Tubular construction, aluminized steel, life cycle tested., Electronic Pilot Ignition, Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Limit Control:, Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Safety Switches:, Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant:, Non-chlorine based, ozone friendly, R-410A., High Pressure Switches, Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Filter/Driers:, High capacity filter/drier protects the system from dirt and moisture., Eco-last Coil System, Condenser coil features lightweight, all aluminum brazed fin construction., Constructed of three components: a flat extrusion tube, fins in-between the flat extrusion tube and two refrigerant manifolds., Evaporator Coil:, Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer., Condensate Drain Pan:, Plastic pan, sloped to meet drainage requirements of ASHRAE 62.1, Side drain connections., Outdoor Coil Fan Motors, Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans:, PVC coated fan guard furnished., Cabinet, Construction, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Warranty, Limited ten years aluminized heat exchanger, limited fifteen years optional stainless steel heat exchanger, Limited five years on compressors, Limited three years on the Eco-last Coil System., Limited one year all other covered components., Approvals, AHRI Certified to AHRI Standard 340/360-2007, Units are ETL listed., Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes.
Product Image Not Available18" Height Downflow Hybrid Roof Curbs
Locke Part #: L9646MFG Part #: 10Z26 Compare
Height: 18"
Product Image Not AvailableCoil/Hail Guards for 7.5-12.5T Z-Series
Locke Part #: L9650MFG Part #: 12X21 Compare
Voltage: 208/230V-3ph
Voltage: 460V-3ph
Voltage: 460V-3ph
Voltage: 575V-3ph
Product Image Not AvailableZGB036S4BW-P 3 TON 1PH 14SEER 65K BTU GAS
Locke Part #: L9660MFG Part #: AE827 Compare
Product Image Not AvailableZGB048S4BX-P 4 TON 1PH 14SEER 150K BTU GAS
Locke Part #: L9661MFG Part #: AE824 Compare
Product Image Not AvailableZGB060S4BX-P 5 TON 1PH 14 SEER 150K BTU GAS
Locke Part #: L9662MFG Part #: AE828 Compare
Product Image Not AvailableZGB072S4BH-Y 6 TON 150K 208/230V 3PH 14 SEER
Locke Part #: L9670MFG Part #: AF068 Compare