Loading ...

Loading ...

Search in: CADDY

P0466.jpgOld Work Box Mount
Locke Part #: P0466MFG Part #: DSI2A Compare
One-piece, break-apart design is easy to handle, Works on drywall, lathe and plaster up to 1.5" thick; only a drywall saw required, No Load Rating - Positioning Only
Finish: Electrogalvanized, Material: Cast Iron, Pipe Size: 4" Max, Dimension (H x L x W): 1-3/16" x 2.06" x 1", Rod Size: 3/8", Flange Thickness: 1/8" - 3/8", Jaw Width: 0.98", Static Load 1: 250 lb, Static Load 2: 500 lb
Finish: Electrogalvanized, Material: Cast Iron, Rod Size: 3/8", Static Load 1: 750 lb
Finish: Electrogalvanized, Material: Steel, Rod Size: 3/8"
P4121.jpg1/4" Slick Strut Nut
Locke Part #: P4121MFG Part #: SLICK250 Compare
P4121.jpg3/8" Slick Strut Nut
Locke Part #: P4122MFG Part #: SLICK375 Compare
P4164.jpgT-Bar Twist Clips
Locke Part #: P4164MFG Part #: 4G16 Compare
Supports electrical fixtures from acoustical tee bar 9/16" or ,15/16 wide.
P4168.jpg1/4" - 20 Thread Impression
Locke Part #: P4168MFG Part #: 812M Compare
Hole: 1/4" - 20, Conduit: 1/2" - 3/4" 812M Conduit Clip now has new finger close capability. 100 per box.
P4169.jpg1/2" To 3/4" Conduit To 1/8" To 1/4" Flanges
Locke Part #: P4169MFG Part #: 812M24 Compare
Fig: 1
P4170.jpgMultifunction Clips
Locke Part #: P4170MFG Part #: 812MF Compare
1/2" To 3/4" Conduit to metal stud.
P4171.jpg24"Elec. Box Hanger
Locke Part #: P4171MFG Part #: 512HD Compare
Packaged 50 per box. One BHC mounting clip is included with each No. 512.
P4177.jpg4" Wall Depth
Locke Part #: P4177MFG Part #: C23 Compare
Single or Multiple Gang Boxes
P4178.jpgKon clips For Wire, Rod And Small Flange
Locke Part #: P4178MFG Part #: K8 Compare
Support conduit (EMT, Rigid, ENT, and Aluminium) to rods of flanges., Can be used for: flexible metallic tubing, armored cable, portable cables, control tubes, communications cable, ect., No installation tools required., Sizing Chart, Conduit Size, 1/2" & 3/4" EMT, 1/2" & 3/4 Rigid, #8, #9, #10 & #12 Wire, K-8, 3/16" & 1/4" Rod, K-8, 1/8, " to 1/4" Flange, K-8, 3/16, ", 3/8", 7/16" & 1/2" Flange, K-8, #12, #10, #9, #8, 14-2 Cable, KX, 4-3 Cable, KX, 12-2 Cable, KX, 12-3 Cable, KX, K8
P4184.jpgTSGB16 BRACKET 11" TO 18
Locke Part #: P4184MFG Part #: TSGB16 Compare
Adjustable
P4184.jpgTSGB24 BRACKET 17" TO 26"
Locke Part #: P4185MFG Part #: TSGB24 Compare
Adjustable
P4186.jpgClip
Locke Part #: P4187MFG Part #: 8P24SM Compare
Eliminates offset bending conduit, No installation tools required, Provides a method of securing conduit and outlet boxes above acoustical tee bar
P4200.jpgLV Plate Mount Bracket
Locke Part #: P4200MFG Part #: MP1S Compare
For new work
P4169.jpg1/2" To 3/4" Conduit To 5/16" To 1/2" Flanges
Locke Part #: P4201MFG Part #: 812M58 Compare
Fig: 1
P4169.jpg1/2" To 3/4" Conduit to 5/16" To 1/2" Flanges
Locke Part #: P4202MFG Part #: 812M58SM Compare
Fig: 2
P4203.jpgM24S UNIVER CLAMP 1/8" TO 1/4
Locke Part #: P4204MFG Part #: M24S Compare
Per Box: 100, Flange: 8"-1/4" 1. To suspend a box to the underside or to the front of beam flanges, 1/4" 3/4" thick., 2. Provided with a 1/4"- 20 thread impression.
P4205.jpgLV Mounting Bracket
Locke Part #: P4205MFG Part #: MPLS Compare
P4206.jpgSupport
Locke Part #: P4206MFG Part #: CS812 Compare
For 1/2" & 3/4" EMT conduit & MC/AC cable.
Eliminates offset bending conduit, No installation tools required, Provides a method of securing conduit and outlet boxes above acoustical tee bar
One fastener fits flanges 1/16" to 1/4", Installation: Hammer-on or install from the floor with the VAFT tool, Used to support 1/4 and 3/8 threaded rod from purlin beam flanges 1/16 thru 1/4 thick
Wt Lbs Per 100: 2-1/2", 3-5/8", 5-1/2", 6"
P4254.jpgWire Cable Support
Locke Part #: P4254MFG Part #: CJ6 Compare
For non-metallic or MC cable.
Eliminates offset bending conduit, No installation tools required, Provides a method of securing conduit and outlet boxes above acoustical tee bar
P4321.jpg1" J-Hook For Data And Communication Cable
Locke Part #: P4321MFG Part #: CAT16HP Compare
J-hook, for CAT6a and higher cabling, Culus Listed and complies with NEC and TIA(SM) requirements for structured cabling systems, Cost-effective alternative to expensive cable tray, Pre-galvanized J-hooks provide smoother cable pull and greater corrosion resistance, Provides proper support of cabling
P4321.jpg2" J-Hook For Data And Communication Cable
Locke Part #: P4322MFG Part #: CAT32HP Compare
J-hook, for CAT6a and higher cabling, Culus Listed and complies with NEC and TIA(SM) requirements for structured cabling systems, Cost-effective alternative to expensive cable tray, Pre-galvanized J-hooks provide smoother cable pull and greater corrosion resistance, Provides proper support of cabling
Will pivot 360, Requires only a hammer and pliers to install., Available for 3/8" EMT, rigid, and aluminium Conduit
Will pivot 360, Requires only a hammer and pliers to install., Available for 3/8" EMT, rigid, and aluminium Conduit
P4329.jpgConduit to Flange Clip, Side Mount, 1/2", 3/4"
Locke Part #: P4329MFG Part #: 812M24SM Compare
Static Load (F): 25 lb
P4331.jpgZ Purlin clip
Locke Part #: P4331MFG Part #: AF14 Compare
P4331.jpgInstallation tool for AF14
Locke Part #: P4332MFG Part #: VAFT Compare
P4333.jpgHammer-on purlin clip
Locke Part #: P4333MFG Part #: 122 Compare
P4334.jpgMC Support For Metal Stud
Locke Part #: P4334MFG Part #: 449 Compare
P4335.jpgNM/MC Support for Wood/Metal stud
Locke Part #: P4335MFG Part #: FXC20 Compare
P4336.jpgConduit Clips
Locke Part #: P4336MFG Part #: 16M Compare
EMT Conduit Size: 1", Static Load (F): 25 lb
STRAIGHT_LENGTH.jpg_.jpg2' LENGTH
Locke Part #: P4337MFG Part #: 16M24 Compare
622417000000
P4329.jpgConduit to Flange Clip, Side Mount, 1"
Locke Part #: P4338MFG Part #: 16M24SM Compare
Static Load (F): 25 lb
P4178.jpgKon Clips For Large Flange
Locke Part #: P4339MFG Part #: KX Compare
Support conduit (EMT, Rigid, ENT, and Aluminium) to rods of flanges., Can be used for: flexible metallic tubing, armored cable, portable cables, control tubes, communications cable, ect., No installation tools required., Sizing Chart, Conduit Size, 1/2" & 3/4" EMT, 1/2" & 3/4 Rigid, #8, #9, #10 & #12 Wire, K-8, 3/16" & 1/4" Rod, K-8, 1/8, " to 1/4" Flange, K-8, 3/16, ", 3/8", 7/16" & 1/2" Flange, K-8, #12, #10, #9, #8, 14-2 Cable, KX, 4-3 Cable, KX, 12-2 Cable, KX, 12-3 Cable, KX, K8
One fastener fits flanges 1/16" to 1/4", Installation: Hammer-on or install from the floor with the VAFT tool, Used to support 1/4 and 3/8 threaded rod from purlin beam flanges 1/16 thru 1/4 thick
Finish: CADDY ARMOUR, Material: Spring Steel, Box Depth: 2-1/8", EMT Conduit Size: 1/2", 3/4"
P5970.jpg9" W x 5-5/8" H
Locke Part #: P5977MFG Part #: PSF10D Compare
100% Recycled Plastic, Load Rating: 1,000lbs (2,000 lbs for 21" wide) Raise conduit off roof surface to comply with 2011 NEC requirements.