Loading ...

Loading ...

ERC 559698 INS,3-1/2,5/8-16 X 3/4
Locke Part #: P9754MFG Part #: 559698
Country of Origin: CN 782856583400
Country of Origin: US 782856504061
ERC T427 TOOL,KIT,SLEEVES
Locke Part #: Q1521MFG Part #: T427
Country of Origin: US 782856381327
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.015, Size: 1/4 in Hole, Mounting Type: Top, Suitable For Use With: Conduit, Boxes and Bridle Rings, Material: Steel, Finish: Electro-Galvanized Clips on acoustical tee bar providing a threaded hole for securing conduit, boxes or bridle rings, Eliminates need for offset bending conduit, Threaded hole, Made of spring stee 782856601005
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.015, Mfg Standards/Approvals: NEC 300.11, Size: 1/4 in Hole, Mounting Type: Single, Suitable For Use With: Conduit, Boxes and Bridle Rings, Material: Steel, Finish: Electro-Galvanized Clips on acoustical tee bar providing a threaded hole for securing conduit, boxes or bridle rings, Eliminates need for offset bending conduit, Threaded hole, Made of spring stee 782856601012
Country of Origin: US, Suitable For Use With: Horizontally Split Mold Most ERICO CADWELD molds using no. 65 welding material and smaller 782856322078
Country of Origin: US, Suitable For Use With: Horizontally Split Mold Most ERICO CADWELD molds using no. 90 welding material and larger 782856322085
Pack Quantity: 50, Country of Origin: US, Material: Copper, Thickness: 0.013 in, Width: 3 in, Length: 1-1/2 in Wrapped around the cable until the diameter is about the same as the cable opening in the mold 782856322177
Country of Origin: US, Mfg Standards/Approvals: cULus Certified, Hole Size: 1/4 in, Flange Size: 1/16 in, Load Capacity: 100 lb, Mounting Type: Single, Material: Spring Steel, Finish: Electro-Galvanized Hammer-on clip compensates for angle of purling, Provides method for attaching conduit and boxes to purling, Caddy armour finish 782856371007
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Type: Snap Close, Conduit Size: 1 in, Load Capacity: 25 lb, Outside Diameter: 1.181 to 1.378 in, Specifications: Plain Hole, 9/32 in Hole, Material: Spring Steel, Finish: Caddy Armor May be used for either vertical or horizontal installations, Eliminates need for offset bending conduit, Finger closure, no tools required, 25 lb Static load capacity, 1 in EMT/Rigid conduit size 782856702160
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1 in, Load Capacity: 75 lb, Outside Diameter: 1.181 to 1.378 in, Flange Size: 1/8 to 1/4 in, Material: Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 75 lb Static load capacity, 1 in EMT/Rigid conduit size 782856162162
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1 in, Load Capacity: 25 lb, Outside Diameter: 1.181 to 1.378 in, Flange Size: 1/8 to 1/4 in, Mounting Type: Side, Material: Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 25 lb Static load capacity, 1 in EMT/Rigid conduit size 782856112167
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1 in, Load Capacity: 75 lb, Outside Diameter: 1.181 to 1.378 in, Flange Size: 5/16 to 1/2 in, Material: Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 75 lb Static load capacity, 1 in EMT/Rigid conduit size 782856172161
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1-1/4 in, Load Capacity: 75 lb, Outside Diameter: 1.378 to 1.654 in, Flange Size: 5/16 to 1/2 in, Material: Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 75 lb Static load capacity, 1-1/4 in EMT, 1-1/4 in Rigid conduit size 782856172208
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1-1/2 in, Load Capacity: 75 lb, Outside Diameter: 1.654 to 1.969 in, Flange Size: 5/16 to 1/2 in, Material: Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 75 lb Static load capacity, 1-1/2 in EMT, 1-1/2 in Rigid conduit size 782856172246
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 2 in, Load Capacity: 75 lb, Outside Diameter: 1.969 to 2.362 in, Flange Size: 1/8 to 1/4 in, Material: Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 75 lb Static load capacity, 2 in EMT, 2 in Rigid conduit size 782856162322
Pack Quantity: 100, Country of Origin: US, Mfg Standards/Approvals: cUL Listed, Conduit Size: 14/2 to 12/3 AWG AC/MC, Outside Diameter: 0.429 to 0.531 in, Wire Size: 12 to 14 AWG, Mounting Type: Clamp, Suitable For Use With: MC or AC Cable to Metal Stud, Specifications: Gray Color, Material: Steel, Finish: Caddy Armor Easily attaches MC or AC to metal stud, No tools required for installation, Provides fast installation 782856799122
Country of Origin: US, Package Weight: 0.02, Mfg Standards/Approvals: UL, cUL Listed, Type: Fixture, Size: 15/16 in, Load Capacity: 50 lb, Specifications: 9/16 in Screw Length 1/4 in Dia Screw, Material: Spring Steel, Finish: Electro-Galvanized Supports electrical fixtures from acoustical t-grid, No tools required for installation, Fast, easy and secure twist-on installation, 5/8 in stud, 15/16 in THK-Grid 782856626381
Country of Origin: US, Package Length: 745, Package Height: 200, Package Width: 157, Package Weight: 8.02, Mfg Standards/Approvals: cULus Listed, Span: 2 ft, Load Capacity: 20 lb, Suitable For Use With: 1-1/2 in D Electrical Box/Lighting Fixture, Material: Spring Steel, Finish: Electro-Galvanized Dual height feature permits 1-1/2 in (38 mm) deep electrical box to be mounted flush with tile or offset 3/4 in (19 mm) for plaster ring, Allows 2-1/8 in (54 mm) deep electrical box to be mounted flush with tile, Snaps easily onto t-grid, Hanger comes complete with box mounting clip and screw 782856677512
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Type: Heavy Duty, Span: 2 ft, Load Capacity: 50 lb, Specifications: 1-1/2 in, 2-1/8 in D Box, Material: Spring Steel, Finish: Pre-Galvanized Quickly mounts a box to t-grid, Adjustable height for various electrical box depths, Mounts flush with face of tile, Installs by hand, Drop wire for independent support from clip and/or bar, Screws easily to tee bar for added stability, Supports multiple box installations 782856677635
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 3/8 in, Load Capacity: 75 lb, Outside Diameter: 0.551 to 0.709 in, Flange Size: 1/8 to 1/4 in, Suitable For Use With: 14-2 to 10-4 AWG MC/AC Cable, Material: Spring Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 14-2 to 12-3 MC/AC cable size, 75 lb Static load capacity, 3/8 in Rigid conduit size 782856162063
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 3/8 in, Load Capacity: 75 lb, Outside Diameter: 0.551 to 0.709 in, Flange Size: 5/16 to 1/2 in, Suitable For Use With: 14-2 to 10-4 AWG MC/AC Cable, Material: Spring Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 14-2 to 12-3 MC/AC cable size, 75 lb Static load capacity, 3/8 in Rigid conduit size 782856172062
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 3/8 in, Outside Diameter: 0.551 to 0.709 in, Suitable For Use With: 14-2 to 12-3 AWG MC/AC Cable, Material: Spring Steel, Finish: Caddy Armor Provides a method of securing conduit above acoustical tee bar, No tools required for installation, Eliminates need for offset bending conduit, 14-2 to 12-3 MC/AC cable size, 3/8 in EMT conduit size 782856602064
Country of Origin: US, Package Weight: 0.015, Mfg Standards/Approvals: UL 2239 Listed, cULus Listed, CSA C22.2 No 18.4-04 Certified, Type: Snap Close, Size: 1/2 in, Suitable For Use With: Beam Clamp, Mounting Type: Locking Clip, Material: Spring Steel, Finish: Caddy Armour, Dimensions: 0.709 to 1.181 in OD Eliminates need for offset bending conduit, May be used for either vertical or horizontal installations, 9/32 in hole size, Plain hole type, 25 - 100 lb ultimate static load, Finger closure, no tools required, Helps to guide alignment with electrical box knockouts, 1/2 in, 3/4 in EMT, Rigid/Pipe 782856702108
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1/2 in, Load Capacity: 75 lb, Outside Diameter: 0.709 to 1.181 in, Flange Size: 1/8 to 1/4 in, Material: Spring Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 75 lb Static load capacity, 1/2 in, 3/4 in EMT/Rigid conduit size 782856162100
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1/2 in, Load Capacity: 25 lb, Outside Diameter: 0.709 to 1.181 in, Flange Size: 1/8 to 1/4 in, Mounting Type: Side, Material: Spring Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 25 lb Static load capacity, 1/2 in, 3/4 in EMT/Rigid conduit size 782856112105
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1/2 in, Load Capacity: 75 lb, Outside Diameter: 0.709 to 1.181 in, Flange Size: 5/16 to 1/2 in, Material: Spring Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 75 lb Static load capacity, 1/2 in, 3/4 in EMT/Rigid conduit size 782856172109
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1/2 in, Load Capacity: 25 lb, Outside Diameter: 0.709 to 1.181 in, Flange Size: 5/16 to 1/2 in, Mounting Type: Side, Material: Spring Steel, Finish: Caddy Armor Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360 degree, Requires only a hammer to install, 25 lb Static load capacity, 1/2 in, 3/4 in EMT/Rigid conduit size 782856122104
Country of Origin: US, Package Weight: 0.04, Mfg Standards/Approvals: cULus Listed, Conduit/Cable Size: 1/2 to 3/4 in, Material: Steel, Finish: Electro-Galvanized, Dimensions: 0.709 to 1.181 in OD Easily snaps onto stud, Snap-close conduit support, Fasten to stud with screw for additional support, 1/2, 3/4 in EMT cable size 782856482109
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1/2 in, Load Capacity: 15 lb, Outside Diameter: 0.709 to 0.866 in, Flange Size: 1/8 to 1/4 in, Mounting Type: Side, Material: Spring Steel, Finish: Caddy Armor Requires only a hammer to install, Will pivot thru 360 degree, 15 lb Static load capacity, 1/2 in EMT conduit size 782856112587
Country of Origin: US, Mfg Standards/Approvals: cULus Certified, Hole Size: 1/4 in, Flange Size: 1/16 to 1/4 in, Load Capacity: 100 lb, Specifications: 3 in L, Material: Spring Steel, Finish: Electro-Galvanized Supports wire or rod from bar joist, Angle flange clip for wire or chain suspensions from Z purlins, Installs from floor with vaft tool and conduit, Caddy armour finish 782856361008
Country of Origin: US, Mfg Standards/Approvals: UL Listed, cULus Certified, Type: Threaded, Hole Size: 1/4 in, Flange Size: 1/16 to 1/4 in, Load Capacity: 100 lb, Specifications: AF-Ti/T Rod to Z Purlin Clip, Material: Spring Steel, Finish: Electro-Galvanized Hammer-on or install from the floor with the vaft tool, Supports wire or rod from bar joist, Used to support 1/4 in and 3/8 in threaded rod, Provides method for attaching rod to Z purlin, Caddy armour finish 782856364047
Country of Origin: US, Mfg Standards/Approvals: cULus Certified, Type: Threaded, Hole Size: 3/8 in, Flange Size: 1/16 to 1/4 in, Load Capacity: 100 lb, Material: Spring Steel, Finish: Electro-Galvanized Hammer-on or install from the floor with the VAFT tool, Provides method for attaching conduit and boxes to purling, Caddy armour finish 782856364061
Pack Quantity: 100, Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Rod Size: 1/4 in, Load Capacity: 100 lb, Bolt Size: #10, Specifications: 20 in-lb Torque/100 lb Static Load, Material: Steel, Finish: Caddy Armour Easy installation to beam flanges, 10.5 mm hole size, Set screw must be tightened and torqued onto the sloped side of the I-beam, Spring stee 782856191001
Country of Origin: US, Mfg Standards/Approvals: UL Listed, cULus Listed and RoHS Compliant, Series: C Series, Box Size: 4 x 4-11/16 in, Suitable For Use With: Electrical Box, Specifications: 0.028 in THK, Material: Steel, Finish: Pre-Galvanized, Dimensions: 5 in H x 5.75 in W x 3.51 in D 2-1/2 in, 3-5/8 in stud wall depth, Replaces H-Brackets with improved design, Thicker steel to significantly increase rigidity and help prevent box movement and trim out issues, Works with both standard and adjustable single and double gang mud rings, Mounts plaster rings for low voltage applications, Additional bend points on C4 and C6 brackets for greater versatility 782856864257
Country of Origin: US, Package Weight: 0.078, Mfg Standards/Approvals: ISO/IEC 14763-2, ANSI/TIA 568, 569, cULus Listed, RoHS Compliant, Size: 1 in, Load Capacity: 60 lb, Material: Steel, Finish: Pre-Galvanized Provides optimal support for high performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic, Rounded edges on J-hooks provide proper bend radius support for high performance data cables, Multiple color options aid in the identification and organization of the pathway application, Provides superior fill capacity and load rating over most other non-continuous cable support alternatives, 1.07 sq in area, 60 lb (Static), For use in air handling (plenum) spaces 782856617600
Country of Origin: US, Package Weight: 0.124, Mfg Standards/Approvals: ISO/IEC 14763-2, ANSI/TIA 568, 569, cULus Listed, RoHS Compliant, Size: 2 in, Load Capacity: 60 lb, Material: Steel, Finish: Pre-Galvanized Provides optimal support for high performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fiber optic, Rounded edges on J-hooks provide proper bend radius support for high performance data cables, Multiple color options aid in the identification and organization of the pathway application, Provides superior fill capacity and load rating over most other non-continuous cable support alternatives, 3.97 sq in area, 60 lb (Static), For use in air handling (plenum) spaces 782856617617
Country of Origin: US, Size: 1/2 x 3/4 in, Suitable For Use With: EMT Conduit, Material: Spring Steel, Finish: Electro-Galvanized One assembly provides support for electrical box and/or conduit from drop wire or rod, Eliminates need for offset bending conduit, 66% less drop wires (rod/wire application), 1/4 in hole, Caddy armour finish 782856520023
Country of Origin: US, Size: 1/2 x 3/4 in, Suitable For Use With: EMT Conduit, Mounting Type: Surface, Material: Spring Steel, Finish: Electro-Galvanized One assembly provides support for electrical box and/or conduit from drop wire or rod, Eliminates need for offset bending conduit, 66% less drop wires (rod/wire application), 1/8 to 1/4 in flange, Caddy armour finish 782856520030
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Conduit/Cable Size: 1 in, Material: Steel, Finish: Electro-Galvanized Accommodates EMT conduit and MC/AC cable, Easily locate the fastener on the stud, keeping your conduit in-line with box knock out and H-series brackets, Eliminates offset bending of conduit, Compliant with NEC Article 358.30(A), which requires conduit support within 36 in of an electrical box, Compliant with CEC Rule 12-1404, which requires conduit support within 1 m of an electrical box, Compliant with CEC Rule 12-618, which requires support of armored cable within 300 mm of an electrical box, 2-1/8 in D box, 1 in EMT cable size 782856588238
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Conduit/Cable Size: 1/2 to 3/4 in, Material: Steel, Finish: Electro-Galvanized Accommodates EMT conduit and MC/AC cable, Easily locate the fastener on the stud, keeping your conduit in-line with box knock out and H-series brackets, Eliminates offset bending of conduit, Compliant with NEC Article 358.30(A), which requires conduit support within 36 in of an electrical box, Compliant with CEC Rule 12-1404, which requires conduit support within 1 m of an electrical box, Compliant with CEC Rule 12-618, which requires support of armored cable within 300 mm of an electrical box, 1-1/2 in D box, 1/2, 3/4 in EMT cable size 782856326069
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Conduit/Cable Size: 1/2 to 3/4 in, Material: Steel, Finish: Electro-Galvanized Accommodates EMT conduit and MC/AC cable, Easily locate the fastener on the stud, keeping your conduit in-line with box knock out and H-series brackets, Eliminates offset bending of conduit, Compliant with NEC Article 358.30(A), which requires conduit support within 36 in of an electrical box, Compliant with CEC Rule 12-1404, which requires conduit support within 1 m of an electrical box, Compliant with CEC Rule 12-618, which requires support of armored cable within 300 mm of an electrical box, 2-1/8 in D box, 1/2, 3/4 in EMT cable size 782856327585
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1 in, Load Capacity: 25/100 lb, Outside Diameter: 1.181 in, Material: Spring Steel, Finish: Caddy Armor Supports conduit to rod, wire or flange, Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable, No installation tools required, 50 lb Transverse, 25 lb Vertical, 100 lb Horizontal load capacity, 1 in, 3/4 in EMT, 1/2 in, 3/4 in Rigid conduit size 782856245162
Country of Origin: US, Package Weight: 0.013, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Conduit Size: 1/2 in, Load Capacity: 25/100 lb, Outside Diameter: 0.709 in, Suitable For Use With: 12-3 AWG MC/AC Cable, Material: Spring Steel, Finish: Caddy Armor Supports conduit to rod, wire or flange, Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable, No installation tools required, 50 lb Transverse, 25 lb Vertical, 100 lb Horizontal load capacity, 1/2 in EMT, 1/2 in Rigid conduit size 782856245087
Country of Origin: US, Mfg Standards/Approvals: UL Listed, cULus Listed and RoHS Compliant, Suitable For Use With: EMT, Ideal for Flexible Conduit, MC/AC or Non-Metallic Sheathed Cable, Material: Steel, Finish: Pre-Galvanized 2-1/2 in, 3-1/2 in, 4 in stud wall depth, Design simplifies handling, reduces inventory and saves space, Requires only a screw gun to install, V-notched on center allows for consistent positioning, Built-in support legs reduce box movement, Can be pre-assembled in the shop to allow for greater efficiency at the job site, Plaster rings can be mounted separately eliminating the need for an electrical box for low-voltage applications, Mounts on either side of stud without need to reposition box, MP series brackets can be attached in-line to the MEB1 for low voltage applications 782856349037
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Type: Low Voltage, Mounting Type: Flush, Suitable For Use With: Low Voltage Class 2 Outlet, Specifications: 1 Gang, Material: Steel, Finish: Plain, Dimensions: 4-1/2 in H x 4 in W Provides a bracket for mounting low voltage class 2 communication outlets, Reduces bulges in the drywall caused by plaster rings, May be installed to the front or the side of the metal or wood stud, Side support provides for a rigid installation, Attaches with self-tapping screws or nails, Works with wood or metal studs, For new construction 782856486602
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Type: Low Voltage, Mounting Type: Flush, Suitable For Use With: Low Voltage Class 2 Outlet, Specifications: 1 Gang, Material: Steel, Finish: Plain Provides positive support with locking screws, Makes wire "fishing" easier, Install with a drywall saw and screwdriver, Eliminates the need for an electrical box when installing low voltage class 2 wiring 782856486350
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, Type: Square, Box Size: 1-1/2 x 2-1/8 in, Suitable For Use With: One Device Style 4S Deep Outlet Box, Specifications: 3 Box, Material: Steel, Finish: Pre-Galvanized, Dimensions: 16 in L Eliminates the need for an electrical box on low voltage applications, Supports electrical boxes, plaster rings or low voltage devices from one bracket, Accommodates up to three 4 or 4-11/16 in boxes or plaster rings, For use between studs, Silver color 782856478164
Pack Quantity: 50, Country of Origin: US, Mfg Standards/Approvals: cUL Listed, Type: Telescoping Screw Gun, Series: TSGB, Box Size: 1-1/2 in, 2-1/8 in, Stud Spacing: 11 to 18 in, Mounting Type: Stud, Suitable For Use With: Between Stud, Material: Steel, Finish: Pre-Galvanized Can mount multiple boxes, Notched and marked for easy identification and bending, Improved design with stamped in markings and pilot holes accelerates precise box conduit mounting between studs, Pilot holes allow easy box attachment with a screwdriver, Requires only a screw gun to install, Can be mounted to face or inside of stud, Adjustable for non-standard stud spacing, Interlocking tab prevents accidental disassembly, Unique, one-piece, break apart design, Reduces movement of the box when used with flexible conduit, ENT, MC, AC or non-metallic sheathed cable, Silver colored 782856476160
Country of Origin: US, Package Length: 91.44, Package Height: 261.62, Package Width: 96.52, Package Weight: 1.64, Mfg Standards/Approvals: UL, cULus Listed, Type: Type GT Standard, Conductor Size: 2 AWG, Rod Size: 5/8 in, Connection Type: Cable to Ground Rod/Other Round, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD exothermic connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 2 AWG Solid Tap Cable, Horizontal cable through vertical tee shape rod, 14.3 mm Actual Ground Rod Dia, 6.5 mm Conductor Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856536543
Country of Origin: US, Package Length: 93.98, Package Height: 261.62, Package Width: 96.52, Package Weight: 1.66, Mfg Standards/Approvals: UL, cULus Listed, Type: Type GT Standard, Conductor Size: 2 AWG, Rod Size: 5/8 in, Connection Type: Cable to Ground Rod/Other Round, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD exothermic connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 2 AWG Stranded Tap Concentric Cable, Horizontal cable through vertical tee shape rod, 14.3 mm Actual Ground Rod Dia, 7.4 mm Conductor Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856536550
Country of Origin: US, Package Length: 91.44, Package Height: 261.62, Package Width: 96.52, Package Weight: 1.6, Mfg Standards/Approvals: UL, cULus Listed, Type: Type GT Standard, Conductor Size: 2/0 AWG, Rod Size: 5/8 in, Connection Type: Cable to Ground Rod/Other Round, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD exothermic connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 2/0 AWG Stranded Tap Concentric Cable, Horizontal cable through vertical tee shape rod, 14.3 mm Actual Ground Rod Dia, 10.6 mm Conductor Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856536604
Country of Origin: US, Package Length: 93.98, Package Height: 259.08, Package Width: 93.98, Package Weight: 1.6, Mfg Standards/Approvals: UL, cULus Listed, Type: Type GT Standard, Conductor Size: 4/0 AWG, Rod Size: 5/8 in, Connection Type: Cable to Ground Rod/Other Round, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD exothermic connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 4/0 AWG Stranded Tap Concentric Cable, Horizontal cable through vertical tee shape rod, 14.3 mm Actual Ground Rod Dia, 13.4 mm Conductor Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856536642
Country of Origin: US, Package Length: 93.98, Package Height: 264.16, Package Width: 96.52, Package Weight: 1.62, Mfg Standards/Approvals: UL, cULus Listed, Type: Type GT Standard, Conductor Size: 2/0 AWG, Rod Size: 3/4 in, Connection Type: Cable to Ground Rod/Other Round, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD exothermic connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 2/0 AWG Stranded Tap Concentric Cable, Horizontal cable through vertical tee shape rod, 17.3 mm Actual Ground Rod Dia, 10.6 mm Conductor Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856536970
Country of Origin: US, Package Length: 91.44, Package Height: 261.62, Package Width: 96.52, Package Weight: 1.6, Mfg Standards/Approvals: UL, cULus Listed, Type: Type GT Standard, Conductor Size: 4/0 AWG, Rod Size: 3/4 in, Connection Type: Cable to Ground Rod/Other Round, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD exothermic connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 4/0 AWG Stranded Tap Concentric Cable, Horizontal cable through vertical tee shape rod, 17.3 mm Actual Ground Rod Dia, 13.4 mm Conductor Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856537014
Country of Origin: US, Mold Size: 76.2 mm, Mold Price Key: C/E/Q/R, Suitable For Use With: C, E, Q, R Mold Price Key Used to securely close the mold around the conductors, Handle clamps are required for most molds, Specialized frames and handles are required for some molds, L160SM has offset handles to ease the installation of connections in a ditch, Copper Cable 782856303756
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Material: Aluminum/Copper Oxide, Color: Orange Mixture consists mainly of copper oxide and aluminum, Primarily used in grounding and bonding applications, Integrated welding material package, Electronic ignition, No starting material required, Non-explosive, Not subject to spontaneous ignition 782856512851
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Material: Aluminum/Copper Oxide, Color: Dark Blue Mixture consists mainly of copper oxide and aluminum, Primarily used in grounding and bonding applications, Integrated welding material package, Electronic ignition, No starting material required, Non-explosive, Not subject to spontaneous ignition 782856512868
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Material: Aluminum/Copper Oxide, Color: Light Blue Mixture consists mainly of copper oxide and aluminum, Primarily used in grounding and bonding applications, Integrated welding material package, Electronic ignition, No starting material required, Non-explosive, Not subject to spontaneous ignition 782856512837
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Material: Aluminum/Copper Oxide, Color: Dark Green Mixture consists mainly of copper oxide and aluminum, Primarily used in grounding and bonding applications, Integrated welding material package, Electronic ignition, No starting material required, Non-explosive, Not subject to spontaneous ignition 782856512844
Country of Origin: US, Mfg Standards/Approvals: cULus Listed, RoHS Exempted, Material: Aluminum/Copper Oxide, Color: Gray Mixture consists mainly of copper oxide and aluminum, Primarily used in grounding and bonding applications, Integrated welding material package, Electronic ignition, No starting material required, Non-explosive, Not subject to spontaneous ignition 782856512738
Country of Origin: US, Package Length: 96.52, Package Height: 238.76, Package Width: 93.98, Package Weight: 1.46, Mfg Standards/Approvals: UL, cULus Listed, Type: Type SS Standard, Conductor Size: 4/0 AWG, Connection Type: Cable to Cable, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD Exothermic Connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 4/0 AWG Stranded Run Concentric Cable, Splice of horizontal cable, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, 13.4 mm Conductor 1 and 2 Nominal Outer Dia, Copper Cable 782856551645
Country of Origin: US, Package Length: 96.52, Package Height: 233.68, Package Width: 93.98, Package Weight: 1.38, Mfg Standards/Approvals: UL, cULus Listed, Type: Type TA Standard, Conductor Size: 2 AWG, Connection Type: Cable to Cable, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD Exothermic Connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 2 AWG Solid Run and Tap Cable, Tee of horizontal run and tap cables, 6.5 mm Conductor 1 and 2 Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856552604
Country of Origin: US, Package Length: 96.52, Package Height: 236.22, Package Width: 91.44, Package Weight: 1.44, Mfg Standards/Approvals: UL, cULus Listed, Type: Type TA Standard, Conductor Size: 2/0 to 4/0 AWG, Connection Type: Cable to Cable, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD Exothermic Connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 4/0 AWG Stranded Run Concentric Cable, 2/0 AWG Stranded Tap Concentric Cable, Tee of horizontal run and tap cables, 13.4 mm Conductor 1 and 10.6 mm Conductor 2 Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856553434
Country of Origin: US, Package Length: 93.98, Package Height: 233.68, Package Width: 93.98, Package Weight: 1.68, Mfg Standards/Approvals: UL, cULus Listed, Type: Type TA Standard, Conductor Size: 4/0 AWG, Connection Type: Cable to Cable, Mold Price Key: C, Mold Size: 3 in W, Handle Clamp: L160, Material: Graphite ERICO CADWELD standard graphite molds are designed and engineered for thousands of connection styles, Forms a permanent, low resistance connection, Provides a molecular bond, ERICO CADWELD Exothermic Connections are rated with the same current capacity as the conductor, Portable installation equipment with no external source of power required, 4/0 AWG Stranded Run and Tap Concentric Cable, Tee of horizontal run and tap cables, 13.4 mm Conductor 1 and 2 Nominal Outer Dia, Installers can be easily trained to make ERICO CADWELD exothermic connections, Connections are visually inspected, Copper Cable 782856553502
Country of Origin: US, Package Length: 231.14, Package Height: 88.9, Package Width: 114.3, Package Weight: 0.96, Mfg Standards/Approvals: cURus Listed, NOM Certified, Size: 6 ft Battery powered controller box designed for 600 connections with one set of batteries, Requires no special batteries or charger, Comes standard with high temperature lead, Connects to the welding material ignition strip with a custom made, purpose designed termination clip, Sends a predetermined voltage to the ignition strip and initiates the reaction, 1.8 m cable length, 8 standard AA batteries 782856476139
Pack Quantity: 1, Country of Origin: US, Package Length: 38.1, Package Height: 302.26, Package Width: 119.38, Package Weight: 0.34, Suitable For Use With: All Standard 14.1 and 16.4 oz Propane Cylinder Self-igniting propane torch head, Squeezing the control knob produces an instant flame, releasing it extinguishes the flame, No flame adjusting, Burn tip remains cool during normal use, Operates on its side or upside down, Can withstand 60 MPH (96 KPH) winds without flareout 782856323006
ERICO T313 Card Cloth Brush
Locke Part #: Q1506MFG Part #: T313
Pack Quantity: 1, Country of Origin: US Aids in removing oxides from conductor surfaces, Made of short, stiff bristles, Generally preferred for cleaning concentric conductors and busbars which are not heavily oxidized 782856323389
Pack Quantity: 1, Country of Origin: US, Package Length: 112, Package Height: 284, Package Width: 120, Package Weight: 0.4, Suitable For Use With: Conductor Aids in removing oxides from conductor surfaces 782856323396
ERICO T320 Flint Ignitor
Locke Part #: Q1522MFG Part #: T320
Country of Origin: US, Package Length: 62, Package Height: 50, Package Width: 178, Package Weight: 0.02 Used to ignite the starting material when making a traditional ERICO CADWELD connection or a LENTON CADWELD rebar connection 782856303770
Pack Quantity: 1, Country of Origin: MX, Type: Narrow, Suitable For Use With: Cleaning ERICO CADWELD Mold, Material: Copper Soft bristles minimize wear of graphite during the cleaning process, Removes slag and particles from mold cavity, tap hole, crucible and cover 782856323495
Pack Quantity: 1, Country of Origin: US, Package Length: 170.18, Package Height: 48.26, Package Width: 134.62, Package Weight: 1.08, Suitable For Use With: HA, HB, HC, VG and VN Mold, Material: Puddy Prolongs useful mold life when the cable opening becomes worn, Required on certain nVent ERICO CADWELD molds such as Types HA, HB, HC, VG and VN, For sealing hot or cold molds to retard leakage from large stranded conductors 782856002314
Pack Quantity: 1, Country of Origin: US, Package Weight: 2, Specifications: 3-1/2 in, 1-1/2 in Knockout, Floor Mount, Finish: HDPE, Color: Green Pedestrian load rating, Chemical, UV and Corrosion-resistant, Boxes and covers nest in 3-1/4 in increments, Two 3-1/2 x 1-1/2 in knockouts per box, T416BH includes four additional holes in the cover to allow water to enter the inspection well, typically for use with chemical ground rods, 0.15 kg/sq-cm load, 260 mm Dia grade level, 333 mm OD, 254 mm height 782856331575