Loading ...

Loading ...

1"x100' ENT UL KWIKON COIL
Locke Part #: P1552MFG Part #: 012041
Carlon Flex-Plus Blue Ent Electrical Nonconducting Tubing Is Ul Listed. Designed For Use With 90 C Conductors. 622454120419
1/2"x200' ENT UL KWIKON
Locke Part #: P1550MFG Part #: 012031
Carlon Flex-Plus Blue Ent Electrical Nonconducting Tubing Is Ul Listed. Designed For Use With 90 C Conductors. 622454120310
2'' 25 GPM 50 Plastic Grease Trap
Locke Part #: D5053MFG Part #: 3925XTA02
3/4"x100' ENT UL KWIKON COIL
Locke Part #: P1551MFG Part #: 012040
Carlon Flex-Plus Blue Ent Electrical Nonconducting Tubing Is Ul Listed. Designed For Use With 90 C Conductors. 622454120402
Package Weight: 14.0, Mfg Standards/Approvals: CSA Certified, MASS Approved, Nominal Size: 2, Flow Rate: 7, Type: Canplas Compact, Dimensions: 14.544 in L x 17.447 in W x 16.305 in H 14 lb 662671055163
Mfg Standards/Approvals: MASS Approved, SA Listed, Nominal Size: 2, Capacity: 20, Flow Rate: 10, Dimensions: 14.551 x 17.444 x 3.606 x 12.7 x 16.306 x 11.835 x 14.835, Type: Compact, Connection Type: No Hub/MJ Coupling, Material: Polypropylene, Color: Gray Injection molded tank, lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications, Enhanced performance, smaller footprint and no ribs where tank meets floor easy to clean, Maximum service temperature rated at 220 deg F, Molded one piece tank eliminates seams and potential leaking, Weighs up to 60% less than directly equivalent metal competitors - offers ease of installation, transport and storage, Connected using mechanical joint couplings allowing for use of various piping materials, Canplas lids supports 440 pounds of pedestrian and light duty traffic, Flexibility of installation - can be installed in-floor, on-floor or semi-recessed, Recessed silicone seal prevents unpleasant odors from leaving the interceptor, Cover is provided with an easy open latch system
Mfg Standards/Approvals: MASS Approved, SA Listed, Nominal Size: 2, Capacity: 30, Flow Rate: 15, Dimensions: 14.555 x 17.446 x 3.606 x 12.71 x 16.316 x 11.838 x 14.839, Type: Compact, Connection Type: No Hub/MJ Coupling, Material: Polypropylene, Color: Gray Injection molded tank, lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications, Enhanced performance, smaller footprint and no ribs where tank meets floor easy to clean, Maximum service temperature rated at 220 deg F, Molded one piece tank eliminates seams and potential leaking, Weighs up to 60% less than directly equivalent metal competitors - offers ease of installation, transport and storage, Connected using mechanical joint couplings allowing for use of various piping materials, Canplas lids supports 440 pounds of pedestrian and light duty traffic, Flexibility of installation - can be installed in-floor, on-floor or semi-recessed, Recessed silicone seal prevents unpleasant odors from leaving the interceptor, Cover is provided with an easy open latch system
Package Weight: 40.0, Mfg Standards/Approvals: CSA Certified, UPC Listed, Nominal Size: 2, Flow Rate: 20, Type: Canplas, Dimensions: 23.5 in L x 17.502 in W x 16.304 in H 40 lb 662671390158
Mfg Standards/Approvals: CSA Certified, Mass Approved, UPC Listed, Application: Plumbing Application, Nominal Size: 2, Inlet Connection: 12.96, Type: Low Profile, Connection Type: No Hub, Color: Gray, Dimensions: 31.063 in W x 23.5 in D x 10.94 in H 25 gpm flow rate, 50 lb capacity 662671390974
Package Weight: 100.0, Mfg Standards/Approvals: CSA Certified, UPC Listed, Nominal Size: 3, Flow Rate: 50, Type: Canplas, Color: Gray, Dimensions: 31 in L x 23-1/2 in W x 23-1/2 in H 100 lb 662671390110
Package Weight: 100.0, Mfg Standards/Approvals: CSA Certified, UPC Listed, Nominal Size: 4, Flow Rate: 50, Type: Canplas, Color: Gray, Dimensions: 31 in L x 23-1/2 in W x 23-1/2 in H 100 lb 662671390134
IPX 068812 1"x45D PVC STD ELBOW SPx
Locke Part #: P0858MFG Part #: 068812
Country of Origin: CA 622454688124
IPX 068816 2 1/2"x45D PVC STD ELBOW
Locke Part #: P8849MFG Part #: 068816
Country of Origin: US 622454688162
IPX 077333 SW5545 4"x3" PVC SWEDGE
Locke Part #: P6381MFG Part #: 077333
Country of Origin: CA 622454773332
IPX 077669 JB446 4"x4"x6" PVC JUNCT
Locke Part #: P1568MFG Part #: 077669
Country of Origin: CA 622454776692
IPX 078581 40STD2022 2"x22 1/2D PVC
Locke Part #: Q0328MFG Part #: 078581
Country of Origin: US 622454785816
IPX 078585 40STD4022 4"x22 1/2D PVC
Locke Part #: P1006MFG Part #: 078585
Country of Origin: CA 622454785854
IPX 089146 KTS10 1/2" PVC SNAP IN M
Locke Part #: P1553MFG Part #: 089146
Country of Origin: CA 622454891463
IPX 165082 1/2"x1000' PIPE LIQUIDTI
Locke Part #: P6324MFG Part #: 165082
Country of Origin: US 622454127036
IPX 165085 3/4"x700' PIPE LIQUIDTIG
Locke Part #: P6325MFG Part #: 165085
Country of Origin: US 622454127043
IPX 178093 SSC BRASS SING. REC COV.
Locke Part #: P2642MFG Part #: 178093
Country of Origin: CN 622454172227
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, RoHS Compliant, Size: 3, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 2.58 in L Female conduit adapter is made of PVC to offer durability, 0.765 in thread length 622454780910
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 227.1 Certified, UL 1653 Listed, RoHS Compliant, Application: Outlet Box To Ent Fitting, Trade Size: 3/4, Type: Male, Suitable For Use With: Scepter Rigid PVC Conduit, Mounting Type: Snap-In, Material: PVC, Color: Gray, Dimensions: 1.76 in L Snap fit connection, Offers the industrys most complete line of ENT fittings for all ENT sizes and transition needs-bridge gaps from ENT to EMT or to metallic slab boxes or to Rigid PVC, Made rugged and concrete-tight, Fittings require no solvent welding or tape, and can be joined to any CSA certified ENT, Kwikon fittings are engineered for the rugged day-to-day challenges of the construction industry whether encased in concrete, concealed in wall or ceilings, or in direct burial applications 622454891470
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 227.1 Certified, UL 1653 Listed, RoHS Compliant, Application: Outlet Box To Ent Fitting, Trade Size: 1, Type: Male, Suitable For Use With: Scepter Rigid PVC Conduit, Mounting Type: Snap-In, Material: PVC, Color: Gray, Dimensions: 1.9 in L Snap fit connection, Offers the industrys most complete line of ENT fittings for all ENT sizes and transition needs-bridge gaps from ENT to EMT or to metallic slab boxes or to Rigid PVC, Made rugged and concrete-tight, Fittings require no solvent welding or tape, and can be joined to any CSA certified ENT, Kwikon fittings are engineered for the rugged day-to-day challenges of the construction industry whether encased in concrete, concealed in wall or ceilings, or in direct burial applications 622454891487
Scepter 068001 Coupling, 3/4 in, PVC
Locke Part #: P0965MFG Part #: 068001
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Size: 3/4, Material: PVC, Dimensions: 1.31 in Dia x 1.64 in L Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454680012
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 3, Radius: 36, Type: Type 40 Special Radius, Angle: 90 deg, Material: PVC Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454680586
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 1/2, Radius: 4, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 0.84 in Dia x 1.05 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685802
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 3/4, Radius: 4-1/2, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 1.05 in Dia x 1.05 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685819
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 1, Radius: 5-3/4, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 1.315 in Dia x 1.875 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685826
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 1-1/4, Radius: 7-1/4, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 1.66 in Dia x 2 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685833
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 1-1/2, Radius: 8-1/4, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 1.9 in Dia x 2 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685840
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 2, Type: Type 40, Angle: 90 deg, Material: PVC Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685857
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 2-1/2, Radius: 10-1/2, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 2-7/8 in Dia x 3 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685864
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 3, Radius: 13, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 3-1/2 in Dia x 3-1/8 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685871
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 3-1/2, Radius: 15, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 4 in Dia x 3-1/4 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685888
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 4, Radius: 16, Type: Type 40, Angle: 90 deg, Material: PVC, Dimensions: 4-1/2 in Dia x 3-3/8 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454685895
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 1-1/4, Radius: 7-1/4, Type: Type 40, Angle: 45 deg, Material: PVC, Dimensions: 1.66 in Dia x 2 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454686038
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 1-1/2, Radius: 8-1/4, Type: Type 40, Angle: 45 deg, Material: PVC, Dimensions: 1.9 in Dia x 2 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454686045
Country of Origin: US, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 2-1/2, Radius: 10-1/2, Type: Type 40, Angle: 45 deg, Material: PVC, Dimensions: 2-7/8 in Dia x 3 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454686069
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 3-1/2, Radius: 15, Type: Type 40, Angle: 45 deg, Material: PVC, Dimensions: 4 in Dia x 3-1/4 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454686083
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 1-1/4, Radius: 7-1/4, Type: Type 80 Standard Radius, Angle: 90 deg, Material: PVC, Dimensions: 1.66 in Dia x 2 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454686939
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 2-1/2, Radius: 10-1/2, Type: Type 80 Standard Radius, Angle: 90 deg, Material: PVC, Dimensions: 2-7/8 in Dia x 3 in THK Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454686960
Country of Origin: CA, Mfg Standards/Approvals: UL 651, CSA C22.2 No 211.2, Application: For Industrial, commercial and residential applications, Size: 1, Series: EC Series, Suitable For Use With: Electrical Rigid PVC Conduit, Material: PVC, Color: Gray, Dimensions: 2.031 in L x 1.59 in W Schedule 40, BELL connection, Sunlight resistant, Rated for use with 90 deg C conductors 622454770034
Country of Origin: CA, Mfg Standards/Approvals: UL 651, CSA C22.2 No 211.2, Application: For Industrial, commercial and residential applications, Size: 1-1/4, Series: EC Series, Suitable For Use With: Electrical Rigid PVC Conduit, Material: PVC, Color: Gray, Dimensions: 2.156 in L x 2 in W Schedule 40, BELL connection, Sunlight resistant, Rated for use with 90 deg C conductors 622454770041
Country of Origin: CA, Mfg Standards/Approvals: UL 651, CSA C22.2 No 211.2, Application: For Industrial, commercial and residential applications, Size: 1-1/2, Series: EC Series, Suitable For Use With: Electrical Rigid PVC Conduit, Material: PVC, Color: Gray, Dimensions: 2.281 in L x 2.23 in W Schedule 40, BELL connection, Sunlight resistant, Rated for use with 90 deg C conductors 622454770058
Country of Origin: CA, Mfg Standards/Approvals: UL 651, CSA C22.2 No 211.2, Application: For Industrial, commercial and residential applications, Size: 2, Series: EC Series, Suitable For Use With: Electrical Rigid PVC Conduit, Material: PVC, Color: Gray, Dimensions: 2.406 in L x 2.72 in W Schedule 40, BELL connection, Sunlight resistant, Rated for use with 90 deg C conductors 622454770065
Country of Origin: CA, Mfg Standards/Approvals: UL 651, CSA C22.2 No 211.2, Application: For Industrial, commercial and residential applications, Size: 2-1/2, Series: EC Series, Suitable For Use With: Electrical Rigid PVC Conduit, Material: PVC, Color: Gray, Dimensions: 3.187 in L x 3.32 in W Schedule 40, BELL connection, Sunlight resistant, Rated for use with 90 deg C conductors 622454770072
Country of Origin: CA, Mfg Standards/Approvals: UL 651, CSA C22.2 No 211.2, Application: For Industrial, commercial and residential applications, Size: 3, Series: EC Series, Suitable For Use With: Electrical Rigid PVC Conduit, Material: PVC, Color: Gray, Dimensions: 3.437 in L x 4 in W Schedule 40, BELL connection, Sunlight resistant, Rated for use with 90 deg C conductors 622454770089
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Size: 3-1/2, Material: PVC, Dimensions: 4.5 in Dia x 3.62 in L Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454770096
Country of Origin: CA, Mfg Standards/Approvals: UL 651, CSA C22.2 No 211.2, Application: For Industrial, commercial and residential applications, Size: 4, Series: EC Series, Suitable For Use With: Electrical Rigid PVC Conduit, Material: PVC, Color: Gray, Dimensions: 3-3/4 in L x 5 in W Schedule 40, BELL connection, Sunlight resistant, Rated for use with 90 deg C conductors 622454770102
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1/2, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 0.84 in ID x 1.08 in OD x 1.55 in L 0.7 in thread length 622454770218
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 3/4, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 1.05 in ID x 1.08 in OD x 1.75 in L 0.63 in thread length 622454770225
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 1.32 in ID x 1.59 in OD x 1.65 in L 0.63 in thread length 622454770232
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1-1/4, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 1.66 in ID x 2 in OD x 2.13 in L 0.64 in thread length 622454770249
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1-1/2, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 1.9 in ID x 2.23 in OD x 2.05 in L 0.73 in thread length 622454770256
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 2, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 2.38 in ID x 2.72 in OD x 2.1 in L 0.8 in thread length 622454770263
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 2-1/2, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 2.88 in ID x 4.45 in OD x 2.85 in L 0.88 in thread length 622454770270
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Size: 3-1/2, Type: Type 40, Thread Type: Non-Tapered, Material: PVC, Dimensions: 3.055 in L Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454770294
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 4, Thread Type: Male, Suitable For Use With: Rigid Conduit, Material: PVC Coated, Dimensions: 4.5 in ID x 4.5 in OD x 3.06 in L 0.92 in thread length 622454770300
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1/2, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 1.08 in OD x 1.725 in L 0.805 in thread length 622454770416
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 3/4, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 1.3 in OD x 1.9 in L 0.79 in thread length 622454770423
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 1.615 in OD x 2.3 in L 0.99 in thread length 622454770430
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1-1/4, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 2 in OD x 2.425 in L 1.015 in thread length 622454770447
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 1-1/2, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 2.23 in OD x 2.44 in L 1.04 in thread length 622454770454
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 2, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 2.72 in OD x 2.55 in L 1.055 in thread length 622454770461
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 2-1/2, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 3.21 in OD x 2.68 in L 0.99 in thread length 622454770478
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 3, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 4 in OD x 3.185 in L 1.365 in thread length 622454770485
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Size: 3-1/2, Type: Type 40, Thread Type: FNPT, Material: PVC, Dimensions: 3.985 in L Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454770492
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 85 Certified, UL 651 Listed, Application: For electrical enclosure connection fitting, Size: 4, Thread Type: Female, Suitable For Use With: PVC Rigid Conduit, Material: PVC Coated, Color: Gray, Dimensions: 5 in OD x 3.44 in L 1.44 in thread length 622454770508
Country of Origin: CA, Application: For duplex receptacles, Type: Weatherproof, Number of Gangs: 1, Cover Type: Duplex Receptacle, Mounting Type: Surface, Material: PVC, Color: Gray 622454770874
Country of Origin: CA, Mfg Standards/Approvals: UL Listed, CSA Certified, Type: 2-Door Weatherproof, Number of Gangs: 2, Cover Type: Duplex Receptacle, Material: PVC, Color: Gray Manufactured with stainless steel return-springs/clips and packaged with brass screws, Scepter weatherproof covers provide a positive seal, even in cold temperatures 622454770973
Country of Origin: CA, Mfg Standards/Approvals: UL 651 Listed, Application: For electrical rigid PVC conduit fitting, Trade Size: 2-1/2 x 2, Material: PVC, Color: Gray, Dimensions: 2.36 in ID x 2.9 in OD x 1.75 in L 622454773097
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Conduit Size: 3 x 2, Material: PVC, Color: Gray Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454773103
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Size: 3 x 2-1/2, Type: Fabricated Swedge, Material: PVC, Dimensions: 6-1/2 in L Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454773356
Country of Origin: CA, Material: PVC, Type: Universal, Hub Size: 1/2 in, 3/4 in, 1 in, Dimensions: 4.62 in H x 4.62 in W, Number of Gangs: 2, Suitable For Use With: Rigid PVC Conduit Fitting, Color: Gray 622454269255
Country of Origin: CA, Mfg Standards/Approvals: UL 514C Listed, CSA C22.2 No. 18.2-06, C22.2 No. 85-M89 Certified, Application: For increased space for installation of receptacles and switches, Type: Deep Universal, Series: FSC, Number of Gangs: 2, Hub Size: 1/2 in, 3/4 in, 1 in, Mounting Type: Surface, Capacity: 37 cu-in, Material: PVC, Color: Gray, Dimensions: 4.62 in L x 4.62 in W x 2.5 in H Molded with 1 in conduit hubs are shipped with 3/4 in and 1/2 in reducer bushings to accommodate various sizes of conduit 622454269309
Country of Origin: CN, Number of Gangs: 1, Cover Type: Blank, Mounting Orientation: Vertical, Mounting Type: Surface, Material: PVC, Color: Gray 622454776111
Country of Origin: CA, Package Weight: 11.7, Mfg Standards/Approvals: UL 514B, UL 514C, CSA C22.2 No. 85, Application: Ground Fault Receptacle Opening, Includes: Gaskets, Length: 4.9, Width: 2.85, Depth: 0.63, Type: Weatherproof, Number of Gangs: 1, Cover Type: Receptacle, Mounting Type: Surface, Material: PVC, Color: Gray Manufactured with stainless steel return-springs/clips and packaged with brass screws, Scepter weatherproof covers provide a positive seal, even in cold temperatures, (1) ground fault receptacle device opening 622454777859
Country of Origin: MX, Mfg Standards/Approvals: UL 514B, UL 514C, CSA C22.2 No. 85, Application: Duplex Receptacle Opening, Includes: Gaskets, Type: Weatherproof, Number of Gangs: 1, Cover Type: Duplex Receptacle, Mounting Type: Surface, Material: PVC, Color: Gray Manufactured with stainless steel return-springs/clips and packaged with brass screws, Scepter weatherproof covers provide a positive seal, even in cold temperatures, (1) duplex receptacle device opening 622454779938
Country of Origin: CA, Mfg Standards/Approvals: CSA C22.2 No. 85, NEMA TC3, UL514B - UL514C, Application: For Utilities, Cable, Communications, Residential, Airports, Subways, Bridges and Tunnels, Mines, Marinas, Water/Sewage Treatment Plants, Pulp and Paper industries, Street and Highway Lighting, Food Processing Plants, Agricultural, Parking Garages, Car Wa, Trade Size: 3, Radius: 13, Type: Type 40 Special Radius, Angle: 22.5 deg, Material: PVC, Dimensions: 3-1/2 in Dia x 3-1/8 T Suitable for exposed, concrete encased and direct burial, Concrete tight in all weather conditions, Offers high impact and tensile strength 622454785830
Country of Origin: CA, Hub Size: 1/2, Series: F Series, Number of Outlets: 1, Number of Gangs: 1, Cable Entry: End, Capacity: 17.5 cu-in, Material: PVC, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw 622454776012
Country of Origin: CA, Hub Size: 3/4, Series: F Series, Number of Outlets: 1, Number of Gangs: 1, Mounting Type: Surface, Capacity: 17.5 cu-in, Material: PVC, Color: Gray, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw 622454776029
Country of Origin: CA, Hub Size: 1/2, Series: F Series, Number of Outlets: 2, Number of Gangs: 1, Cable Entry: End, Capacity: 17 cu-in, Material: PVC, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw, (2) end hub location 622454776043
Country of Origin: CA, Hub Size: 3/4, Series: F Series, Number of Outlets: 2, Number of Gangs: 1, Cable Entry: End, Capacity: 17 cu-in, Material: PVC, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw, (2) end hub location 622454776050
Country of Origin: CA, Mfg Standards/Approvals: UL 514B, UL 514C, C22.2 No. 85, Hub Size: 1/2, Series: F Series, Number of Outlets: 2, Number of Gangs: 1, Cable Entry: End, Capacity: 17 cu-in, Material: PVC, Color: Gray, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw 622454776074
Country of Origin: CA, Hub Size: 3/4, Series: F Series, Number of Outlets: 2, Number of Gangs: 1, Cable Entry: End, Capacity: 17 cu-in, Material: PVC, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw 622454776081
Country of Origin: CA, Hub Size: 1/2, Series: F Series, Number of Outlets: 3, Number of Gangs: 1, Cable Entry: End, Capacity: 16.3 cu-in, Material: PVC, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw, (1) end, (2) end hub location 622454776227
Country of Origin: CA, Hub Size: 3/4, Series: F Series, Number of Outlets: 3, Number of Gangs: 1, Cable Entry: End, Capacity: 16.3 cu-in, Material: PVC, Dimensions: 4-9/16 in L x 2-13/16 in W x 2 in D All F series boxes are supplied with integral mounting feet, threaded brass inserts and grounding screw, (1) end, (2) end hub location 622454776234
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Includes: Threaded Brass Inserts, Brass Screws, PVC Gasketing, Mounting Feet, Size: 8 x 8 x 4, Capacity: 248 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid PVC Conduit Fittings, Material: PVC, Color: Gray, Dimensions: 8-5/8 in L x 8-5/8 in W x 7-1/4 in D Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature, 8.965 in L x 8.965 in W x 0.610 in THK cover dimension 622454776647
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Includes: Threaded Brass Inserts, Brass Screws, PVC Gasketing, Mounting Feet, Size: 12 x 12 x 6, Capacity: 846 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid PVC Conduit Fittings, Material: PVC, Color: Gray, Dimensions: 12.58 in L x 12.58 in W x 6.24 in D Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature, 12.925 in L x 12.925 in W x 0.600 in THK cover dimension 622454776661
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Includes: Threaded Brass Inserts, Brass Screws, PVC Gasketing, Mounting Feet, Size: 4 x 4 x 4, Capacity: 51.5 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid PVC Conduit Fittings, Material: PVC, Color: Gray, Dimensions: 4.395 in L x 4.395 in W x 4.17 in D Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature, 4.01 in L x 4.01 in W x 0.245 in THK cover dimension 622454776968
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Includes: Threaded Brass Inserts, Brass Screws, PVC Gasketing, Mounting Feet, Size: 6 x 6 x 4, Capacity: 138 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid PVC Conduit Fittings, Material: PVC, Color: Gray, Dimensions: 6.375 in L x 6.375 in W x 4.18 in D Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature, 6.83 in L x 6.83 in W x 0.5 in THK cover dimension 622454776975
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Size: 4 x 4 x 4, Capacity: 50.11 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid Non Metallic Conduit System, Material: PVC, Color: Gray, Dimensions: 3.85 in L x 4.9 in W x 4.9 in D Junction boxes form an integral part of a circuit protection system, Constructed to provide a deg of protection to personnel against incidental contact with the enclosed equipment and to provide a deg of protection to the enclosed equipment against specified environmental conditions, JBX boxes are molded of PVC, are entirely non-metallic and provide NEMA Type 1, 2, 3R, 4, 4X, 6, 6P, 12, 13 protection, JBX junction boxes are designed and approved for use in indoor/outdoor, industrial, MRO and OEM applications for the accessibility and installation of wire and cable in continuous lengths and to enclose joints and splices, Designed and approved for use in both indoor and outdoor applications, JBX junction boxes allow for accessibility for installation of wire and cable in continuous lengths and to enclose joints and splices, JBX junction boxes can also be used to enclose electrical equipment in non-hazardous locations, Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature 622454418639
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Size: 6 x 6 x 4, Capacity: 172.05 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid Non Metallic Conduit System, Material: PVC, Color: Gray, Dimensions: 7.58 in L x 7.58 in W x 4.9 in D Junction boxes form an integral part of a circuit protection system, Constructed to provide a deg of protection to personnel against incidental contact with the enclosed equipment and to provide a deg of protection to the enclosed equipment against specified environmental conditions, JBX boxes are molded of PVC, are entirely non-metallic and provide NEMA Type 1, 2, 3R, 4, 4X, 6, 6P, 12, 13 protection, JBX junction boxes are designed and approved for use in indoor/outdoor, industrial, MRO and OEM applications for the accessibility and installation of wire and cable in continuous lengths and to enclose joints and splices, Designed and approved for use in both indoor and outdoor applications, JBX junction boxes allow for accessibility for installation of wire and cable in continuous lengths and to enclose joints and splices, JBX junction boxes can also be used to enclose electrical equipment in non-hazardous locations, Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature 622454418660
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Size: 8 x 8 x 4, Capacity: 293.19 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid Non Metallic Conduit System, Material: PVC, Color: Gray, Dimensions: 9.58 in L x 9.56 in W x 4.9 in D Junction boxes form an integral part of a circuit protection system, Constructed to provide a deg of protection to personnel against incidental contact with the enclosed equipment and to provide a deg of protection to the enclosed equipment against specified environmental conditions, JBX boxes are molded of PVC, are entirely non-metallic and provide NEMA Type 1, 2, 3R, 4, 4X, 6, 6P, 12, 13 protection, JBX junction boxes are designed and approved for use in indoor/outdoor, industrial, MRO and OEM applications for the accessibility and installation of wire and cable in continuous lengths and to enclose joints and splices, Designed and approved for use in both indoor and outdoor applications, JBX junction boxes allow for accessibility for installation of wire and cable in continuous lengths and to enclose joints and splices, JBX junction boxes can also be used to enclose electrical equipment in non-hazardous locations, Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature 622454418721
Country of Origin: CA, Mfg Standards/Approvals: UL 50/50E, CSA 94.1/94.2, CSA C22.2 No 85, CSA C22.2 No 40, UL 94V-0, UL 746C, UL 508A, Application: Indoor and Outdoor Electrical Enclosure, Size: 12 x 12 x 6, Capacity: 822.21 cu-in, Mounting Type: Surface, Suitable For Use With: Rigid Non Metallic Conduit System, Material: PVC, Color: Gray, Dimensions: 12.24 in L x 13.58 in W x 6.9 in D Junction boxes form an integral part of a circuit protection system, Constructed to provide a deg of protection to personnel against incidental contact with the enclosed equipment and to provide a deg of protection to the enclosed equipment against specified environmental conditions, JBX boxes are molded of PVC, are entirely non-metallic and provide NEMA Type 1, 2, 3R, 4, 4X, 6, 6P, 12, 13 protection, JBX junction boxes are designed and approved for use in indoor/outdoor, industrial, MRO and OEM applications for the accessibility and installation of wire and cable in continuous lengths and to enclose joints and splices, Designed and approved for use in both indoor and outdoor applications, JBX junction boxes allow for accessibility for installation of wire and cable in continuous lengths and to enclose joints and splices, JBX junction boxes can also be used to enclose electrical equipment in non-hazardous locations, Injection molded gasket permanently fixed to the cover - no installation required, no loose hardware for easy installation, Close by hand - tool assist to open, 100% non-metallic - corrosion resistant material, Molded-in - no loose parts to assemble, located on corners out of the way of conduit connections, Flush with the back of the box for close surface mounting, Integrated design of mounting feet offers improved strength, No ribs - offers a flat, smooth surface for mounting of devices or labels, Easy reference for drilling knockouts, Makes conduit alignment a snap, 122 deg F maximum temperature range, -40 to 122 deg F operating temperature 622454418875