Loading ...

Loading ...

Mfg Standards/Approvals: CE Marked, cRUus Listed, RoHS Compliant, UL Listed, Wattage: 2.88, Voltage Rating: 12, Lumens: 286, Color Temperature: 3000, Type: Dimmable, Lamp Type: LED, Color: Warm White, Color Rendering Index (CRI): 81, Beam Angle: 120 deg, Dimensions: 0.1 in H x 0.3 in W Bright task lighting, Closet applications, 3M adhesive backing, -4 to 122 deg F ambient temperature, DC plug, lead wires connection, 1 in cuttable increments, Indoor environment/IP rating, 36 LED chips per foot, 0.3 in LED chip spacing(between centers), Epistar LED chip, 16.4 ft maximum run, -4 to 176 deg F operating temperature, 16.4 ft spool length
Mfg Standards/Approvals: UL 2464 20/4 AWG, Specifications: 10, Type: LED, Series: Dazzle RGB, Suitable For Use With: Fluid View, Blaze 12 VAC LED Tape Light, Avenue 24 24 VAC Premium LED Tape Light, Dimensions: 48 in L x 0.55 in W x 0.2 in H 10mm connector attaches DAZZLE RGB Tape Light directly to a hard-wired connection., Wire: UL 2464 20/4 AWG, CLICKTIGHT LED tape light connectors may be utilized in indoor environments., Connectors, extensions cables, etc. are not rated for in-wall installations, May not be used with wet location strip light., DAZZLE CLICKTIGHT connectors are design only for use with indoor versions of DAZZLE CLICKTIGHT RGB & RGBW LED Tape Light and color controllers., For use with RGB & RGBW LED Tape Light, Durable and secure fitting, Quick and easy to install
Mfg Standards/Approvals: UL 2464 20/4 AWG, Specifications: 10, Type: LED, Series: Dazzle RGB, Suitable For Use With: Fluid View 12V LED Tape Light, VALENT Premium 12V LED Tape Light, AVENUE 24 Premium 24V LED Tape Light, FLUID VIEW 24V LED Tape Light - 90 CRI, ULTRA BLAZE LED Tape Light (70 CRI), Dimensions: 3.00 in L x 0.55 in W x 0.20 in H 10mm connector attaches two sections of DAZZLE RGB Tape Light., Wire lead allows for turns around tight corners., UL listed 2464 20/4 AWG wire, CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field., Firm connection, Easy to install
Mfg Standards/Approvals: UL 2464 20/4 AWG, Specifications: 10, Type: LED, Series: Dazzle RGB, Suitable For Use With: Fluid View 12V LED Tape Light, VALENT Premium 12V LED Tape Light, AVENUE 24 Premium 24V LED Tape Light, FLUID VIEW 24V LED Tape Light - 90 CRI, ULTRA BLAZE LED Tape Light (70 CRI), Dimensions: 48 in L x 0.55 in W x 0.20 in H 10mm connector attaches two sections of DAZZLE RGB Tape Light., Wire lead allows for turns around tight corners., UL listed 2464 20/4 AWG wire, CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field., Firm connection, Easy to install
Mfg Standards/Approvals: UL 2464 20/4 AWG, Specifications: 10, Type: LED, Series: Dazzle RGB, Suitable For Use With: Fluid View 12V LED Tape Light, VALENT Premium 12V LED Tape Light, AVENUE 24 Premium 24V LED Tape Light, FLUID VIEW 24V LED Tape Light - 90 CRI, ULTRA BLAZE LED Tape Light (70 CRI), Dimensions: 12 in L x 0.55 in W x 0.20 in H 10mm connector attaches two sections of DAZZLE RGB Tape Light., Wire lead allows for turns around tight corners., UL listed 2464 20/4 AWG wire, CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field., Firm connection, Easy to install
Suitable For Use With: Fluid View, Blaze 12 VAC LED Tape Light, Avenue 24 24 VAC Premium LED Tape Light, Dimensions: 12 in L x 0.5 in W x 0.2 in H Attaches two sections of tape light together, Wire lead allows for turns around tight corners
Suitable For Use With: Fluid View, Blaze 12 VAC LED Tape Light, Avenue 24 24 VAC Premium LED Tape Light, Color: White, Dimensions: 48 in L x 0.5 in W x 0.2 in H Attaches tape light directly to a hard-wired driver/low voltage control
Package Weight: 0.88, Mfg Standards/Approvals: CE Marked, CSA C22.2 NO 223-M91, cULus R/C 1310, UL Listed, Application: For low voltage LED tape light and fixtures, outdoor/Indoor and wet/dry locations, Length: 6.4, Temperature Rating: -22 to 158, Input Voltage: 100 to 240, Output Voltage: 12, Amperage Rating: 1.2/1, Power Rating: 60, Height: 1.26, Width: 1.67, Color: White, Type: Hardwired Constant Voltage, Material: Plastic Short circuit, over current, over voltage, over temperature protections, Lead wires connection, Compatible with LO-PRO J-Box (small) DI-JBOX-LPS junction boxes, PWM and RGB(W) dimmers/controls and DMX controls dimmability, Auto reset Hiccup circuit breakers, 47 to 63 Hz frequency, 1.2 A at 115 VAC, 1 A at 230 VAC full load input current, UL 1015 18/2 AWG, AC/L (brown), AC/N (blue), No FG connection (class II) primary leads, UL 1007 16/2 AWG, V(red), V-(black) secondary Leads, 83% efficiency, IP67 protection, 20 to 90% RH non-condensing working humidity, Free air convection cooling 848333003790
Package Weight: 3.2, Mfg Standards/Approvals: ETL 4001928, UL 5085-1/5085-3, Application: For low voltage LED fixtures, outdoor/indoor and dry/wet locations, Input Voltage: 120, Output Voltage: 12, Amperage Rating: 760, Power Rating: 60, Width: 2.6, Length: 6.6, Height: 2.3, Temperature Rating: -4 to 158 deg F, Power Factor: 0.84, Color: Black, Type: Magnetic Dimmable, Material: Steel NEMA 3R enclosure with built-in junction box, Fanless design, cooling by free air convection, Dimmable with compatible MLV dimmers, Built-in junction box, Lead wires connection, Black powder coated steel enclosure, Double section bobbin coil former, -4 to 104 deg F ambient temperature, B130 deg C thermal class, 60 Hz frequency, 10.8 VDC output full load, 12.5 VDC open circuit output voltage, PVC 600 V #20 primary leads, PVC 600 V #16 secondary leads, Primary and secondary auto reset circuit breakers, 78.8% efficiency 848333003295
Package Weight: 5.5, Mfg Standards/Approvals: ETL 4001928, UL 5085-1/5085-3, Application: For low voltage LED fixtures, outdoor/indoor and dry/wet locations, Length: 9.8, Width: 3.1, Height: 3, Power Rating: 100, Amperage Rating: 1.33, Output Voltage: 12, Input Voltage: 120, Color: Black, Material: Steel, Type: Magnetic Dimmable, Temperature Rating: -4 to 158 deg F, Power Factor: 0.93 NEMA 3R enclosure with built-in junction box, Fanless design, cooling by free air convection, Dimmable with compatible MLV dimmers, Built-in junction box, Lead wires connection, Black powder coated steel enclosure, Double section bobbin coil former, -4 to 104 deg F ambient temperature, B130 deg C thermal class, 60 Hz frequency, 11 VDC output full load, 12.8 VDC open circuit output voltage, PVC 600 V #18 primary leads, PVC 600 V #12 secondary leads, Primary and secondary auto reset circuit breakers, 77.4% efficiency 848333003301
Package Weight: 1.14, Mfg Standards/Approvals: CE Marked, CSA C22.2 NO 223-M91, cULus R/C 1310, UL Listed, Application: For low voltage LED tape light and fixtures, outdoor/Indoor and wet/dry locations, Input Voltage: 100 to 277, Output Voltage: 24, Amperage Rating: 1.1/0.55/0.45, Power Rating: 96, Height: 1.38, Width: 2.78, Length: 7.87, Power Factor: >0.95, Material: Plastic, Color: White, Temperature Rating: -22 to 122 deg F, Type: Hardwired Constant Voltage Short circuit, over current, over voltage, over temperature protections, Lead wires connection, Compatible with LO-PRO J-Box (large) DI-JBOX-LPL junction boxes, PWM and RGB(W) dimmers/controls and DMX controls dimmability, Auto reset Hiccup circuit breakers, 47 to 63 Hz frequency, 1.1 A at 115 VAC, 0.55 A at 230 VAC, 0.45 A at 277 VAC full load input current, UL SVT 18/2 AWG, AC/L (brown), AC/N (blue), GND (green) primary leads, UL SVT 18/2 AWG, V(red), V-(black) secondary Leads, 88.5% efficiency, IP64 protection, 20 to 90% RH non-condensing working humidity, Free air convection cooling 848333004216
Package Weight: 1.87, Mfg Standards/Approvals: CE Marked, cULus 60950-1, Application: For low voltage LED tape light and fixtures, indoor and dry locations, Input Voltage: 100 to 240, Output Voltage: 24, Amperage Rating: 3.5/1.7, Power Rating: 200, Height: 2-1/2, Width: 4.14, Length: 9.77, Type: Hardwired Constant Voltage, Material: Aluminum, Temperature Rating: 14 to 140 deg F, Power Factor: >0.97/>0.93 Short circuit, over current, over voltage, over temperature protections, Lead wires connection, Compatible with DI-0940 Meanwell junction box, DI-1733 mounting brackets (for driver only), Non-dimmable, on/off switching only, Auto reset Hiccup circuit breakers, 50/60 Hz frequency, 3.5 A at 115 VAC, 1.7 A at 230 VAC full load input current, Terminal block with framed ground connection primary leads, Terminal block secondary leads, 85% efficiency, 22.8 to 26.4 V voltage adjustment dial, 20 to 90% RH non-condensing working humidity, Built-in cooling fan, > 0.97 at 115 VAC/> 0.93 at 240 VAC full load power factor 848333004223
Application: For low voltage LED tape light and fixtures, outdoor/Indoor and wet/dry locations, Warranty: 5 Year Limited, Length: 4.1, Input Voltage: 120, Output Voltage: 12, Amperage Rating: 5, Power Rating: 60, Height: 1.4, Width: 2.1, Color: White, Type: Hardwired Constant Voltage 60 watts, Single pole, 100%-1% dimming, No minimum load, Fits into standard recessed electrical box
Diode LED DI-1810 DMX 4 Channel Decoder
Locke Part #: P8098MFG Part #: DI-1810
Warranty: 1 Year Limited, Output Voltage: 12-24, Series: DMX, Suitable For Use With: RGB tape light and linear LED tape or strip light, Connection Type: Ethernet Socket, Screw Terminal, Dimensions: 6.5 in x 2.4 in x 1.24 in Translates a DMX signal into the PWM control signal used by RGB LED lights., Use with RGB tape light and linear LED tape or strip light.
Mfg Standards/Approvals: CE, ROHS, UL Component Recognized, UL Standard 2108, Warranty: 5 Year Limited, Connection Type: Hardwire, RGB, Series: Dazzle, Dimensions: var x 0.4 in x 0.1 in DAZZLE 24® 24V RGB LED Tape Light is an excellent solution for full color dynamic effects., 16 million color options, Use with any Diode LED RGB color controller, Dynamic and versatile accent lighting, 3M adhesive backing
Warranty: 1 Year Limited, Input Voltage: 12-24, Connection Type: Screw Terminal, Series: Attribute, Suitable For Use With: Fluid View, Blaze 12 VAC LED Tape Light, Avenue 24 24 VAC Premium LED Tape Light, Remote Control Type: RF, Color: White, Dimensions: Receiver: 5.66"x1.8"x0.63" Controller: 1.9"x4.7"x0.75" The ATTRIBUTE Color Controller for RGB and RGB(W) LED lighting is affordable, flexible, and easy to install., For small-scale LED lighting installations, This single zone control system makes adding color to any environment effortless., Use the color wheel on the Radio Frequency (RF) remote control to pick the perfect color or choose 1 of the 10 dynamic color modes available through the remote., No need of a computer and no complex programming., ATTRIBUTE takes the complexity out of color control and is exclusive to Diode LED.
Warranty: 2 Year Limited, Input Voltage: 12-24, Connection Type: Tape Light, Series: Clicktight, Suitable For Use With: Fluid View, Blaze 12 VAC LED Tape Light, Avenue 24 24 VAC Premium LED Tape Light, IP Rating: Indoor, Color: White 8mm window connector attaches two sections of AVENUE 24, BLAZE & FLUID VIEW Tape Light together., UL Listed 2464 Wire, CLICKTIGHT Connectors are an easy way to install your standard single color LED tape light out in the field., Firm connection, Easy to install
Mfg Standards/Approvals: CE, Warranty: 2 Year Limited, Input Voltage: 12-24, Connection Type: Tape Light, Series: Clicktight, Suitable For Use With: Fluid View, Blaze 12 VAC LED Tape Light, Avenue 24 24 VAC Premium LED Tape Light, IP Rating: Indoor, Color: White 8mm window connector attaches AVENUE 24, BLAZE & FLUID VIEW Tape Light directly to a hard-wired connection., UL Listed 2464 Wire, Firm connection, Easy to install
Connection Type: Screw Terminal, Series: DMX, Suitable For Use With: Fluid View, Blaze 12 VAC LED Tape Light, Avenue 24 24 VAC Premium LED Tape Light, IP Rating: Indoor, Remote Control Type: WiFi, Color: White, Dimensions: 4.72 in x 2.95 in x 1.15 in DMX wall-mounted color control systems provide professional-level control of color-changing RGB and RGBW LED lighting in one or multiple independent areas., IOS & Android compatible, 3 zones, Fits in a single gang box
Mfg Standards/Approvals: ETL Listed, Output Voltage: 24, Power Rating: 120, Connection Type: Screw Terminal, Series: Omnidrive, IP Rating: Indoor, Dimensions: 15 in x 3.1 in x 2.4 in OMNIDRIVE 2 Electronic Dimmable Driver a 0% minimum wattage load and provides a excellent dimming range and a housed within an electrical enclosure, No minimum load required, Superior dimming range, ETL Listed enclosure, Comprehensive dimming capacity
Mfg Standards/Approvals: ETL Listed, Output Voltage: 24, Power Rating: 200, Connection Type: Screw Terminal, Series: Omnidrive, IP Rating: Indoor, Dimensions: 16.1 in x 3.4 in x 2.4 in OMNIDRIVE 2 Electronic Dimmable Driver a 0% minimum wattage load and provides a excellent dimming range and a housed within an electrical enclosure, No minimum load required, Superior dimming range, ETL Listed enclosure, Comprehensive dimming capacity
Mfg Standards/Approvals: ETL Listed, Output Voltage: 12, Power Rating: 60, Connection Type: Screw Terminal, Series: Omnidrive, IP Rating: Indoor, Dimensions: 13.75 in x 3 in x 1.6 in OMNIDRIVE 2 Electronic Dimmable Driver a 0% minimum wattage load and provides a excellent dimming range and a housed within an electrical enclosure, No minimum load required, Superior dimming range, ETL Listed enclosure, Comprehensive dimming capacity
Mfg Standards/Approvals: ETL Listed, Output Voltage: 12, Power Rating: 24, Connection Type: Screw Terminal, Series: Omnidrive, IP Rating: Indoor, Dimensions: 13.75 in x 3 in x 1.6 in OMNIDRIVE 2 Electronic Dimmable Driver a 0% minimum wattage load and provides a excellent dimming range and a housed within an electrical enclosure, No minimum load required, Superior dimming range, ETL Listed enclosure, Comprehensive dimming capacity
Diode LED DI-PA-12V24W-CL2-W Plug-in Adapters
Locke Part #: Q0197MFG Part #: DI-PA-12V24W-CL2-W
Warranty: 1 Year Limited, Output Voltage: 12, Power Rating: 24, Connection Type: DC Plug, IP Rating: Indoor, Dimensions: 3.8 in x 1.75 in x 1.4 in A portable, flexible power supply to power low voltage lighting, Portable, Plug-In, 12V or 24V DC, Black or white finish
Diode LED DI-PA-12V36W-CL2-W Plug-in Adapters
Locke Part #: Q0198MFG Part #: DI-PA-12V36W-CL2-W
Warranty: 1 Year Limited, Output Voltage: 12, Power Rating: 36, Connection Type: DC Plug, IP Rating: Indoor, Dimensions: 3.8 in x 1.75 in x 1.4 in A portable, flexible power supply to power low voltage lighting, Portable, Plug-In, 12V or 24V DC, Black or white finish
Country of Origin: US, Application: For wire and tape light, Includes: J-Clips, Type: Indoor, Suitable For Use With: 0.4 in/10 mm Maximum Width LED Tape Lights, Specifications: Screw Mount, Material: Polyamide, Color: White, Dimensions: 0.87 in L x 0.2 in W x 0.1 in H Four styles
Mfg Standards/Approvals: CE, ROHS, UL Component Recognized, UL Listed, Warranty: 12 Year Limited, Specifications: 16, Type: LED, Series: Fluid View, Suitable For Use With: SWITCHEX® Driver and Dimmer Switch, OMNIDRIVE® Electronic Dimmable Drivers, Constant Voltage Drivers, Constant Voltage LED Drivers, Plug-In Adapters, Magnetic Dimmable Drivers, Lutron® Hi-lumeā„¢ 1% Dimmable LED Drivers, 0-10V Dimmable LED, OMNIDRIVE® 2 Ele, Dimensions: 0.31 in W x 0.1 in H The FLUID VIEW® LED Tape Light is our most popular LED lighting solution and is an excellent accent indoor lighting solution., Multi-use strip light, Medium brightness, Accent or ambient lighting, Wide range of CCTs, 3M adhesive backing, Light Beam Angle 120 degree