Loading ...

Loading ...

Search in: BrassCraft Mfg Co

SF1335.jpgTEFLON VALVE PACKING 3/32 X 36 ROPE
Locke Part #: A4003MFG Part #: SF1335 Compare
Dimensions: 3/32" W x 36" L, Finish: White, Packaging: 1 Per Card, Material: PTFE 39166039692
S1-12DW F_STD.jpg3/8" COMP X 3/8" COMP 12" DWSH
Locke Part #: B0209MFG Part #: S1-12DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613144665
S1-16DW F_STD.jpg3/8 CMP X 3/8 CMP X 16" DISH
Locke Part #: B0210MFG Part #: S1-16DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613158815
S1-20DW F_STD.jpg3/8 CMP X 3/8 CMP X 20" DISH
Locke Part #: B0211MFG Part #: S1-20DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613158839
S8-12A F_STD.jpg1/2" FIP X 1/2" FIP 12" FAUCET
Locke Part #: B0212MFG Part #: S8-12A F Compare
Size: 1/2” F.I.P x 1/2" F.I.P, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only 26613008868
S8-16A F_STD.jpg1/2" FIP X 1/2" FIP 16" FAUCET
Locke Part #: B0213MFG Part #: S8-16A F Compare
Size: 1/2” F.I.P x 1/2" F.I.P, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only 26613008882
S8-20A F_STD.jpg1/2" FIP X 1/2" FIP 20" FAUCET
Locke Part #: B0214MFG Part #: S8-20A F Compare
Size: 1/2” F.I.P x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only 26613008905
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, Two high-performance O-rings withstand high temperatures and corrosion from harsh water environments, Machined, extruded brass body provides strength, durability, and long-lasting performance, Blow-out-proof brass stem is assembled from the inside out with two O-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Exclusive, chrome-plated metal handle is designed for durability, corrosion resistance, & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% leak tested, 100% compliant product available, For use with water in accessible locations only.
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance o-rings withstand high temperatures and corrosion from harsh water environments, 100% leak tested, Machined one-piece brass body provides strength, durability and long-lasting performance, Blow-out proof brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, Compliant KT Stops available for California and Vermont low-lead requirements, For use in potable water distribution systems
OR17X C_STD.jpgANG VAL 1/2 FIP X 3/8 CMP RIS
Locke Part #: B0225MFG Part #: OR17X C Compare
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, Compliant Stops available for California and Vermont low-lead requirements, For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613138176
OCR19X C_STD.jpgANG VAL 1/2 NOM CMP X 3/8 CMP
Locke Part #: B0226MFG Part #: OCR19X C Compare
Size: 1/2” Nom Compression x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613135113
Size: 1/4” Nom Compression x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Knurled oval handle provides a secure grip and smooth on/off operation, No Lead, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
Size: 1/2” nom crimp barb (for PEX) x 1/4” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, Knurled oval handle provides a secure grip and smooth on/off operation,, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
R19X C_STD.jpgANG VAL 1/2 SWT X 3/8 CMP RIS
Locke Part #: B0231MFG Part #: R19X C Compare
Size: 1/2” Nom Sweat x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, No Lead, For use with water in accessible locations only., Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613138480
Size: 1/2” Nom Compression x 1/4” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% Leak tested, No Lead, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), Not intended for recirculating water systems that produce continuous use temperatures above 115 F., For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems.
OR12XC.jpgSTR VAL 1/2 FIP X 3/8 CMP RIS
Locke Part #: B0236MFG Part #: OR12X C Compare
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, 100% Compliant product available, For use with water in accessible locations only., Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613138442
KTCR19X C1_STD.jpgANG VLV 1/2 NOM CMP X 3/8 OD
Locke Part #: B0237MFG Part #: KTCR19X C Compare
Size: 1/2” Nom. Compression x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance o-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability and long-lasting performance, Blow-out proof brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% leak tested, Compliant KT Stops available for California and Vermont low-lead requirements, For use in potable water distribution systems 26613138688
OCR14X C_STD.jpgSTR VLV 1/2 NOM CMP X 3/8 OD
Locke Part #: B0238MFG Part #: OCR14X C Compare
Size: 1/2” Nom Compression x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Knurled oval handle provides a secure grip and smooth on/off operation, No Lead, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613136981
OCR09X C_STD.jpgANG VAL 1/2 CMP X 1/4 CMP RIS
Locke Part #: B0239MFG Part #: OCR09X C Compare
Size: 1/2” Nom Compression x 1/4” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613135274
Size: 3/8” O.D. Female Captive Nut x 3/8” O.D. Compression x 3/8” O.D. Compression, Operating Temperature: 40°- 180°F at Maximum Operating Pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, For use with instrumentation, hydraulic and pneumatic systems., Compliant to California, Vermont and Maryland low-lead requirements, Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing,, Compliant product CSA approved to California Health & Safety Code 116875,Vermont Bill S.152 and Maryland House Bill 372 (Project # 234795) 26613140926
Size: 3/8” O.D. Female Captive Nut x 3/8” O.D. Compression x 1/4” O.D. Compression, Operating Temperature: 40°- 180°F at Maximum Operating Pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, For use with instrumentation, hydraulic and pneumatic systems., Compliant to California, Vermont and Maryland low-lead requirements, Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing,, Compliant product CSA approved to California Health & Safety Code 116875,Vermont Bill S.152 and Maryland House Bill 372 (Project # 234795) 26613140933
Size: 1/2” Nom compression x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, Two high-performance o-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability, and long-lasting performance, Brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Exclusive, plated metal handle is designed for durability, corrosion resistance, and a sleek appearance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, 100% Leak tested. No Lead, For use with water in accessible locations only.
CR1901DVSX R_STD.jpgD/O VLV 1/2 NOM CMP X 3/8 CMP X 3/8 CMP
Locke Part #: B0248MFG Part #: CR1901DVSX R Compare
Size: 1/2" Nom compression x 3/8” OD compression x 3/8” OD compression, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Independent flow control. Dual outlet, dual shut-off operation permits you to shut-off water flow to one fixture while maintaining water flow to another fixture, Code approved replacement where separate shut-offs are required for two lines, Knurled oval handle provides a secure grip and smooth on/off operation, Straight inlet to outlet design (same-side outlets) is great for installations in tight spaces, Machined one-piece brass body provides strength, durability, and long-lasting performance, For use with water in accessible locations only., Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% compliant product available,, Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613137407
Size: 1/2” F.I.P. x 3/8” OD Compression x 3/8" OD Compression, Finish: Rough, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Independent flow control. Dual outlet, dual shut-off operation permits water flow to be controlled at one fixture while maintaining flow to the other fixture, Code approved replacement for areas requiring separate shut-offs for two lines, Machined one-piece brass body provides strength, durability and longer-lasting performance, Knurled oval handles provide a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment helps protect against accidental operation during the rough-in phase, Compliant Dual-Outlet, Dual-Shut-Off Stops available for California and Vermont low-lead requirements, Not intended for recirculating water systems that produce continuous use temperatures above 115 F., For use in potable water distribution systems.
Size: 1/2” Nom. CPVC x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, No lead, For use in potable water distribution systems., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
Size: 1/2” Nom. CPVC x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, Compliant Multi-Turn Stops available for California, Vermont and Maryland low-lead Requirements, For use in potable water distribution systems., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
G2CEPX19X C_STD.jpg1/4 TRN ANG VLV 1/2 NOM X 3/8 CMP
Locke Part #: B0266MFG Part #: G2CR19X C Compare
Size: 1/2” Nom Compression x 3/8” OD Compression, Chrome Plated, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% Leak tested, No Lead, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), Not intended for recirculating water systems that produce continuous use temperatures above 115 F., For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems. 26613135069
G2CR14X C_STD.jpg1/4 TURN STR VLV 1/2 NOM X 3/8 CMP CP
Locke Part #: B0267MFG Part #: G2CR14X C Compare
Size: 1/2” Nom compression x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-Piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, 100% Leak tested, No Lead, For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613136929
G2R17X C_STD.jpg1/4 TURN ANG VLV 1/2 FIP X 3/8 CMP CP
Locke Part #: B0268MFG Part #: G2R17X C Compare
Size: 1/2” F.I.P. x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-Piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut-off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% leak tested, Machined one-piece brass body provides strength, durability and long-lasting performance, Easy-to-remove handle with screw attachment protects accidental operation during rough-ins, Compliant G2 Stops available for California and Vermont no-lead Requirements, For use in potable water distribution systems., Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613137926
Size: 1/2” nom CPVC x 3/8” OD compression, Finish: Chrome One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut-off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, 100% leak tested, 100% Compliant product available, For use with water in accessible locations only., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
S1-12DLM F_INL.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0282MFG Part #: S1-12DLM F Compare
26613157023
S1-16DLM F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0283MFG Part #: S1-16DLM F Compare
26613160276
S1-16DL F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0289MFG Part #: S1-16DL F Compare
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, 100% No Lead, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, For use in potable water distribution systems in accessible locations only, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections 26613095370
Size: 1/2” Compression x 7/8” Ballcock, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613966823
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 9, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only
S1-12A F_STD.jpg3/8" COMP X FIP, 12" FAUCET
Locke Part #: B0294MFG Part #: S1-12A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613008806
S1-16A F_INL.jpg3/8" COMP X FIP, 16" FAUCET
Locke Part #: B0295MFG Part #: S1-16A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613008820
S1-20A F_STD.jpg3/8" COMP X FIP, 20" FAUCET
Locke Part #: B0296MFG Part #: S1-20A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613008844
S1-12KC F_STD.jpg3/8CMPX3/8CMPX12" FCET KC NOSE
Locke Part #: B0297MFG Part #: S1-12KC F Compare
Size: 3/8” Compression x 3/8" OD Compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections 26613158907
S1-12DL F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0298MFG Part #: S1-12DL F Compare
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613009049
S1-30A F_STD.jpg3/8 CMP X 1/2 FIP X 30" FAUCET
Locke Part #: B0299MFG Part #: S1-30A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 30, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613158730
S1-20DL F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0302MFG Part #: S1-20DL F Compare
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only 26613009063
BRPX19X C_STD.jpg1/2"NOM BRBX 3/8 OD ANGVLV PX TBING
Locke Part #: B0303MFG Part #: BRPX19X C Compare
Size: 1/2” nom crimp barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, Knurled oval handle provides a secure grip and smooth on/off operation,, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613138206
BRPX14X C_STD.jpg1/2 NOM BRBX 3/8"OD STRVLV PX TBING
Locke Part #: B0304MFG Part #: BRPX14X C Compare
Size: 1/2” Nom. Barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, Knurled oval handle provides a secure grip and smooth on/off operation,, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613142326
S1-20KC F_STD.jpg3/8CMPX3/8CMP 20" FCET KC NOSE
Locke Part #: B0305MFG Part #: S1-20KC F Compare
Size: 3/8” Compression x 3/8" OD Compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections 26613158914
Size: 1/2" Nom compression x 3/8” OD compression x 3/8” OD compression, Finish: Rough, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance., Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle helps protect against accidental stop operation during rough-ins, 100% Compliant, For use in potable water distribution systems, Not intended for recirculating water systems that produce continuous use temperatures above 115 F
R1701LRXC1.jpgD/O VAL 1/2"IP ANG VAL 3/8"OD
Locke Part #: B0315MFG Part #: R1701LRX C1 Compare
Size: 1/2” F.I.P. x 3/8” OD Compression x 3/8" OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability and long-lasting performance, Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, Compliant Stops available for California and Vermont no-lead requirements., For use in potable water distribution systems., Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613137001
Size: 3/8” Flare x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections 26613966687
Product Image Not Available3/8 Flare x 7/8 Ballcock Nut 12 in
Locke Part #: B0318MFG Part #: BF1-12DL F Compare
Size: 3/8" Flare x 7/8" Ballcock x 12” Length, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections 26613966427
BF3-20A F_INL.jpg1/2 in Flare x 1/2 FIP 20 in
Locke Part #: B0321MFG Part #: BF3-20A F Compare
Size: 1/2” Flare x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, No Lead, For use in potable water distribution systems in accessible locations only. 26613966724
Product Image Not Available1/2 Flare x 7/8 Ballcock Nut 12 in
Locke Part #: B0322MFG Part #: BF3-12DL F Compare
Size: 1/2" Flare x 7/8" Ballcock x 12” Length, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections 26613966595
CR1900LX C1_EXP.jpgD/O VLV 1/2 NOM 3/8 OD COMP 1/4 OD COMP
Locke Part #: B0326MFG Part #: CR1900LX C1 Compare
Size: 1/2" Nom compression x 3/8” OD compression x 1/4” OD compression (left side), Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance., Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle helps protect against accidental stop operation during rough-ins, 100% Compliant, For use in potable water distribution systems, Not intended for recirculating water systems that produce continuous use temperatures above 115 F 26613138220
CR1900LX C1_EXP.jpgD/O VLV 1/2 NOM 3/8 OD COMP 1/4 OD COMP
Locke Part #: B0327MFG Part #: CR1900RX C1 Compare
Size: 1/2" Nom compression x 3/8” OD compression x 1/4” OD compression (left side), Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance., Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle helps protect against accidental stop operation during rough-ins, 100% Compliant, For use in potable water distribution systems, Not intended for recirculating water systems that produce continuous use temperatures above 115 F 26613136882
KTBRPX19X C_STD.jpg1/2"NOM BRB X 3/8"OD ANGVA
Locke Part #: B0329MFG Part #: KTBRPX19X C Compare
Size: 1/2” Nom crimp barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance O-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability, and long-lasting performance, Brass stem is assembled from the inside out with two O-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents O-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance, and a sleek appearance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, 100% leak tested, 100% Compliant product available, For use in potable water distribution systems 26613150062
KTBRPX14X C_EXP.jpg1/2"NOM BRB X 3/8"OD STRVAL
Locke Part #: B0330MFG Part #: KTBRPX14X C Compare
Size: Straight 1/2" Nom Barb x 3/8" OD Comp, Finish: Chrome, Quantity: 60, Weight (LBS): 13.2 26613150055
SCR19X C_STD.jpgANG VAL 1/2 CMP X 3/8 CMP
Locke Part #: B0332MFG Part #: SCR19X C Compare
Size: 1/2” Nom compression x 3/8” OD compression with loose key, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Large loose key handle provides a secure grip for trouble-free on/off operation, Removable loose key handle helps protect against accidental stop operation during rough-ins, No Lead, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems, Not intended for recirculating water systems that produce continuous use temperatures above 115 F. 26613137438
Size: 1/2” Nom crimp barb (for PEX) x 3/8” OD compression x 3/8” OD compression, Finish: Rough, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
G2PS19X C.jpg1/2 NOM PUSH CONNECT X 3/8 OD CON X 3/8CMP CHR
Locke Part #: B0372MFG Part #: G2PS19X C Compare
Size: 1/2” Nom push connect x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Compatible with PEX, copper, and CPVC., Compact machined one-piece body design, Pre-inserted tube stiffener is installation ready for a faster connection, Fast, reliable, secure, Smooth 1/4 turn operation, 100% leak tested, 100% Compliant, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613142128
Product Image Not Available1/2 NOM PUSH CONNECT X 3/8 OD CON X 3/8CMP CHR
Locke Part #: B0373MFG Part #: G2PS14X C Compare
Size: 1/2” Nom push connect x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Compatible with PEX, copper, and CPVC., Compact machined one-piece body design, Pre-inserted tube stiffener is installation ready for a faster connection, Fast, reliable, secure, Smooth 1/4 turn operation, 100% leak tested, 100% Compliant, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613142142
Size: 3/8” OD x 72” long slip tube, Finish: Chrome Plated, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece construction, 100% Compliant product, For use in potable water distribution in accessible locations only.
P1-20DL_STD.jpgLAV RIS 3/8 OD X 20 LG
Locke Part #: B0387MFG Part #: P1-20A Compare
Size: 3/8” OD tube, Length (in): 19-1/2, Operating Temperature: 40°- 150° F, Pressure: 125 psi maximum, Tubing Diameter: 0.375” O.D. or 0.50" O.D. One-piece construction, Cut-to-Length for clean, professional installation, 100% Compliant to California and Vermont low-lead requirements, For use in potable water distribution systems in accessible locations only 26613044910
P1-20A.jpgLAV RIS 3/8 OD X 30 LG
Locke Part #: B0388MFG Part #: P1-30A Compare
Size: 3/8” OD tube, Length (in): 29-1/2, Operating Temperature: 40°- 150° F, Pressure: 125 psi maximum, Tubing Diameter: 0.375” O.D. or 0.50" O.D. One-piece construction, Cut-to-Length for clean, professional installation, 100% Compliant to California and Vermont low-lead requirements, For use in potable water distribution systems in accessible locations only 26613044958
CR1900DVSX R_STD.jpg1/2 NOM COMP X 3/8 OD X 1/4 OD OFFSET 180 RGH
Locke Part #: B0448MFG Part #: CR1900DVSX R Compare
Size: 1/2" Nom compression x 3/8” OD compression x 1/4” OD compression, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Independent flow control. Dual outlet, dual shut-off operation permits you to shut-off water flow to one fixture while maintaining water flow to another fixture, Code approved replacement where separate shut-offs are required for two lines, Knurled oval handle provides a secure grip and smooth on/off operation, Straight inlet to outlet design (same-side outlets) is great for installations in tight spaces, Machined one-piece brass body provides strength, durability, and long-lasting performance, For use with water in accessible locations only., Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% compliant product available,, Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613137971
OCR19B120DLXC.jpg12" Braided Connector 1/2" Nom Compression x 7/8" Ballcock
Locke Part #: C0202MFG Part #: OCR19B120DLX C Compare
Size: 1/2" Nom Compression x 7/8" Ballcock, Length (in): 12, Quantity: 50, Weight (LBS): 18.5 026613155265
P1-12DL_STD.jpgCLO RIS 3/8"OD X 12"
Locke Part #: C0234MFG Part #: P1-12DL Compare
Size: 3/8” OD Tube, Length (in): 11-1/2, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.375” O.D. or 0.50" O.D. One-piece construction, Cut-to-Length for a clean, professional installation, 100% Compliant to California and Vermont low-lead requirements, For use in potable water distribution systems in accessible locations only 26613044873
P1-20DL_STD.jpgCLO RIS 3/8 OD X 20 LG
Locke Part #: C0235MFG Part #: P1-20DL Compare
Size: 3/8” OD Tube, Length (in): 19-1/2, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.375” O.D. or 0.50" O.D. One-piece construction, Cut-to-Length for a clean, professional installation, 100% Compliant to California and Vermont low-lead requirements, For use in potable water distribution systems in accessible locations only 26613044934
BCT015-H.jpgAdjustable Anti-Siphon Toilet Tank Fill Valve
Locke Part #: C0312MFG Part #: BCT015-H Compare
Replaces most old style fill valves, Adjusts from 9 to 14 inches in height, Features 1/4-turn height adjustment, Includes metal S clip, plastic refill tube, plastic lock nut, plastic fill valve connector nut, rubber cone washer, and rubber shank washer boxed
Dimensions: 6.3"L x 4.7"W x 2.2"D, Packaging: 1 Per Bag, Weight (Lbs): 18.1, Quantity: 144, Ship CTN Cubic Feet: 2.4 026613117812
Finish: Black, Packaging: 1 Per Bag, Material: Rubber
Size: 0.57” ID X 24” connector with 3/4” M.I.P x 7/8” OD Compression end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braining, significantly increasing the flexibility of the connector, No kinking, No crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Won t work harden even with repeated bending, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, 100% compliant to California and Vermont low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply., Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 24” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
BWB20-18.jpgPOLYMER BRD WTRHTCON3/4FIPX7/8ODCMPX18
Locke Part #: E0066MFG Part #: BWB20-18 Compare
Size: 0.57” ID X 18” connector with 3/4” M.I.P x 3/4" F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products,, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Won t work harden even with repeated bending, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, Available for PEX connections, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F. 26613965451
Size: 0.57” ID X 18” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
TWV3SRX.jpgSERVICE VALVE KIT 3/4" IPS
Locke Part #: E1138MFG Part #: TWV30RX Compare
Size: 3/4” IPS x 3/4” IPS Hot/Cold Service Valve Kit w/ 200K Pressure Relief Valve, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Compact design ideal for recessed and cover box installations, Captive coupling nut & washer reduces opportunity for component loss making installation easier, Captive washer won t kink or tear during installation, Forged, one-piece construction reduces the potential for pinhole leaks, 100% Compliant, Integrated drain valve with independent, turn operation allows quick system diagnostic testing and maintenance, Built-in side port for the pressure relief valve reduces the number of connections & simplifies the installation, Right-sized handles, color-coded for immediate system identification. Perfect for tight installations, For use in potable water distribution systems for water flow control. Valves connect directly to cold water inlet and hot water outlet of the tankless water heater. Use for appliance maintenance and emergency shut-off. 26613141343
Product Image Not AvailableSERVICE VALVE KIT 3/4" SWT INL
Locke Part #: E1139MFG Part #: TWV3SRX Compare
Size: 3/4” Sweat x 3/4” IPS Hot/Cold Service Valve Kit w/ 200K Pressure Relief Valve, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Compact design ideal for recessed and cover box installations, Captive coupling nut & washer reduces opportunity for component loss making installation easier, Captive washer won t kink or tear during installation, Forged, one-piece construction reduces the potential for pinhole leaks, 100% Compliant, Integrated drain valve with independent, turn operation allows quick system diagnostic testing and maintenance, Built-in side port for the pressure relief valve reduces the number of connections & simplifies the installation, Right-sized handles, color-coded for immediate system identification. Perfect for tight installations, For use in potable water distribution systems for water flow control. Valves connect directly to cold water inlet and hot water outlet of the tankless water heater. Use for appliance maintenance and emergency shut-off. 26613141404
40-4_STD.jpg1/4-in OD Flare Cap
Locke Part #: H0490MFG Part #: 40-4 Compare
Size: 1/4" OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines, Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613004914
40-6_STD.jpg3/8-in OD Flare Cap
Locke Part #: H0491MFG Part #: 40-6 Compare
Size: 3/8” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines, Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613004921
40-10.jpg5/8-in OD Flare Cap
Locke Part #: H0493MFG Part #: 40-10 Compare
Size: 5/8” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines, Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613004945
41S-4_STD.jpg1/4-in OD Short Flare Nut
Locke Part #: H0500MFG Part #: 41S-4 Compare
Size: 1/4” OD tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613004952
41S-4.jpg3/8-in OD Short Flare Nut
Locke Part #: H0501MFG Part #: 41S-6X Compare
Size: 3/8” OD tube, heavy pattern, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613058900
41S-8_STD.jpg1/2-in OD Short Flare Nut
Locke Part #: H0502MFG Part #: 41S-8 Compare
Size: 1/2” OD tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613004990
41S-10_STD.jpg5/8-in OD Short Flare Nut
Locke Part #: H0503MFG Part #: 41S-10 Compare
Size: 5/8” OD tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005003
141S-14.jpgFlare Refrigeration Nut - Short 7/8" OD Tube
Locke Part #: H0505MFG Part #: 141S-14 Compare
Size: 7/8" OD, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared.
141S-4_STD.jpg1/4-in Flare Nut
Locke Part #: H0506MFG Part #: 141S-4 Compare
Size: 1/4" OD, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. 26613005720
141S-6_STD.jpg3/8-in Flare Nut
Locke Part #: H0507MFG Part #: 141S-6 Compare
Size: 3/8" OD, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. 26613005737
141S-8_STD.jpg1/2-in Flare Nut
Locke Part #: H0508MFG Part #: 141S-8 Compare
Size: 1/2" OD, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. 26613005744
141S-10_STD.jpg5/8-in Flare Nut
Locke Part #: H0509MFG Part #: 141S-10 Compare
Size: 5/8" OD, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. 26613005751
141S-14.jpgFlare Refrigeration Nut - Short 3/4" OD Tube
Locke Part #: H0510MFG Part #: 141S-12 Compare
Size: 3/4" OD, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared.
46-6-8_STD.jpg3/8-in OD Flare x 1/2-in FIP Reducing Adaptor
Locke Part #: H0513MFG Part #: 46-6-8 Compare
Size: 3/8” OD Flare x 1/2” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005232
46-6-12.jpg3/8-in OD Flare x 3/4-in FIP Reducing Adaptor
Locke Part #: H0514MFG Part #: 46-6-12 Compare
Size: 3/8” OD Flare x 3/4” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005249
46-8-8_STD.jpg1/2-in OD Flare x 1/2-in FIP Adaptor
Locke Part #: H0518MFG Part #: 46-8-8 Compare
Size: 1/2" OD Flare x 1/2” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005270
46-8-12_STD.jpg1/2-in OD Flare x 3/4-in FIP Adaptor
Locke Part #: H0519MFG Part #: 46-8-12 Compare
Size: 1/2" OD Flare x 3/4” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005287
46-10-8_STD.jpg5/8-in OD Flare x 1/2-in FIP Reducing Adaptor
Locke Part #: H0522MFG Part #: 46-10-8 Compare
Size: 5/8” OD Flare x 1/2” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005300
46-6-8.jpg5/8-in OD Flare x 3/4-in FIP Reducing Adaptor
Locke Part #: H0523MFG Part #: 46-10-12 Compare
Size: 5/8” OD Flare x 3/4” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005317
46-6-8.jpg7/8” OD Flare x 3/4” F.I.P Adapter
Locke Part #: H0524MFG Part #: 46-14-12 X Compare
Size: 7/8” OD Flare x 3/4” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
48-4-4_STD.jpg1/4-in OD Flare x 1/4-in MIP Adaptor
Locke Part #: H0528MFG Part #: 48-4-4 Compare
Size: 1/4" OD Flare x 1/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005348
48-6-4_STD.jpg3/8-in OD Flare x 1/4-in MIP Reducing Adaptor
Locke Part #: H0531MFG Part #: 48-6-4 Compare
Size: 3/8" OD Flare x 1/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005379
48-6-6.jpg3/8-in OD Flare x 3/8-in MIP Adaptor
Locke Part #: H0532MFG Part #: 48-6-6 Compare
Size: 3/8" OD Flare x 3/8" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005386
48-6-8_STD.jpg3/8-in OD Flare x 1/2-in MIP Reducing Adaptor
Locke Part #: H0533MFG Part #: 48-6-8 Compare
Size: 3/8" OD Flare x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005393
48-6-12_STD.jpg3/8-in OD Flare x 3/4-in MIP Adaptor
Locke Part #: H0534MFG Part #: 48-6-12 Compare
Size: 3/8" OD Flare x 3/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005409
48-8-8_STD.jpg1/2-in OD Flare x 1/2-in MIP Adaptor
Locke Part #: H0538MFG Part #: 48-8-8 Compare
Size: 1/2" OD Flare x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005430
48-8-12_STD.jpg1/2-in OD Flare x 3/4-in MIP Adaptor
Locke Part #: H0539MFG Part #: 48-8-12 Compare
Size: 1/2" OD Flare x 3/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005447
48-10-8_STD.jpg5/8-in OD Flare x 1/2-in MIP Reducing Adaptor
Locke Part #: H0543MFG Part #: 48-10-8 Compare
Size: 5/8" OD Flare x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005461
48-10-12_BTY.jpg5/8-in OD Flare x 3/4-in MIP Reducing Adaptor
Locke Part #: H0544MFG Part #: 48-10-12 Compare
Size: 5/8" OD Flare x 3/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005478
48-14-12_STD.jpg7/8-in OD Flare x 3/4-in MIP Adaptor
Locke Part #: H0546MFG Part #: 48-14-12 Compare
Size: 7/8" OD Flare x 3/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005485
42-4_STD.jpg1/4-in OD Flare x 1/4-in OD Flare Union
Locke Part #: H0549MFG Part #: 42-4 Compare
Weight: 0.3 lbs, Finish: Rough, Quantity: 10, Temperature: -65°F - 250°F, Fitting Body: C36000 brass 26613005010
42-6_STD.jpg3/8-in OD Flare x 3/8-in OD Flare Union
Locke Part #: H0550MFG Part #: 42-6 Compare
Size: 3/8" OD Tube, both ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005034
42-8_STD.jpg1/2-in OD Flare x 1/2-in OD Flare Union
Locke Part #: H0551MFG Part #: 42-8 Compare
Size: 1/2" OD Tube, Both ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005041
42-10_STD.jpg5/8-in OD Flare x 5/8-in OD Flare Union
Locke Part #: H0552MFG Part #: 42-10 Compare
Size: 5/8" OD Tube, Both ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005058
49-6-6.jpg3/8-in OD Flare x 3/8-in MIP Elbow Adaptor
Locke Part #: H0555MFG Part #: 49-6-6 Compare
Size: 3/8” OD Flare x 3/8” M.I.P., Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings,Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005522
Size: 3/8” OD Tube, all three ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005133
Size: 1/2” OD Tube, all three ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005140
Size: 5/8” OD Tube, all three ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613005157
61-4_STD.jpg1/4-in OD Tube Nut
Locke Part #: H0570MFG Part #: 61-4 Compare
Size: 1/4" OD Tube, rough brass, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613006055
61-6_STD.jpg3/8-in OD Tube Nut
Locke Part #: H0571MFG Part #: 61-6 Compare
Size: 3/8” OD Tube, rough brass, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613006079
61-4.jpgCompression Nut 1/2" OD Tube
Locke Part #: H0572MFG Part #: 61-8 Compare
Size: 1/2” OD Tube, rough brass, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
61-4.jpgCompression Nut 5/8" OD Tube
Locke Part #: H0573MFG Part #: 61-10 Compare
Size: 5/8” OD Tube, rough brass, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
61CP-4X_STD.jpg1/4-in Compression Cap
Locke Part #: H0574MFG Part #: 61CP-4X Compare
Size: 1/4” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613154411
60-4.jpg1/4-in Compression Sleeves
Locke Part #: H0575MFG Part #: 60-4 Compare
Size: 1/4” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. 26613005928
60-10_STD.jpg3/8-in Compression Sleeves
Locke Part #: H0576MFG Part #: 60-6 Compare
Size: 3/8” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. 26613005942
60-8_STD.jpg1/2-in OD Tube Sleeves
Locke Part #: H0577MFG Part #: 60-8 Compare
Size: 1/2” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. 26613005966
60-6_STD.jpg5/8-in Compression Sleeves
Locke Part #: H0578MFG Part #: 60-10 Compare
Size: 5/8” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. 26613005973
61CP-4.jpgCompression Cap 3/8" OD Tube
Locke Part #: H0579MFG Part #: 61CP-6 X Compare
Size: 3/8” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
61CP-4.jpgCompression Cap 5/8" OD Tube
Locke Part #: H0580MFG Part #: 61CP-10 Compare
Size: 5/8” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
66-4-4.jpg1/4" OD Tube Compression x 1/4" F.I.P Adapter
Locke Part #: H0581MFG Part #: 66-4-4 X Compare
Size: 1/4” OD Tube x 1/4” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Pressure: 300 psi, Vibration: Fair vibration resistance* Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
66-4-4.jpg3/8" OD Tube Compression x 3/8" F.I.P Adapter
Locke Part #: H0587MFG Part #: 66-6-6 X Compare
Size: 3/8” OD Tube x 3/8” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Pressure: 200 psi, Vibration: Fair vibration resistance* Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 3/8” OD Tube x 1/2” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Pressure: 200 psi, Vibration: Fair vibration resistance* Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 5/8” OD Tube x 1/2” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Pressure: 150 psi, Vibration: Fair vibration resistance* Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 7/8” OD Tube x 3/4” F.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Pressure: 75 psi, Vibration: Fair vibration resistance* Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613148144
Size: 1/4" OD Tube x 1/8" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613135533
68-4-2.jpg1/4" OD Tube Compression x 1/4" M.I.P Adapter
Locke Part #: H0601MFG Part #: 68-4-4 X Compare
Size: 1/4" OD Tube x 1/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 1/4" OD Tube x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 3/8" OD Tube x 1/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613135526
Size: 3/8" OD Tube x 3/8" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613136646
Size: 3/8" OD Tube x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613136615
Size: 1/2" OD Tube x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613135380
Size: 5/8" OD Tube x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 5/8" OD Tube x 3/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 7/8" OD Tube x 1/2" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
68-14-12X_STD.jpg7/8OD x 3/4 MIP Compression Male Reducing Adaptors
Locke Part #: H0619MFG Part #: 68-14-12X Compare
Size: 7/8" OD Tube x 3/4" M.I.P, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613135366
62-4X_STD.jpg1/4-in OD Tube Compression Union
Locke Part #: H0620MFG Part #: 62-4X Compare
Size: 1/4” OD Tube, both ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613135403
62-6X_STD.jpg3/8-in OD Tube Compression Union
Locke Part #: H0621MFG Part #: 62-6X Compare
Size: 3/8” OD Tube, both ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613136899
62-4X.jpgCompression Union 1/2" OD Tube x 1/2" OD Tube
Locke Part #: H0622MFG Part #: 62-8 X Compare
Size: 1/2” OD Tube, both ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
62-10X_STD.jpg5/8-in OD Tube Compression Union
Locke Part #: H0623MFG Part #: 62-10X Compare
Size: 5/8” OD Tube, both ends, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613136783
62-6-4X_STD.jpg3/8-in OD Tube x 1/4-in OD Tube Reducing Union
Locke Part #: H0624MFG Part #: 62-6-4X Compare
Size: 3/8” OD Tube x 1/4” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613135427
Size: 5/8” OD Tube x 3/8” OD Tube, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
62-14X_STD.jpg7/8-in OD Tube Compression Union
Locke Part #: H0626MFG Part #: 62-14X Compare
Size: 7/8” OD Tube, both ends, bulk, Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613136806
Size: 3/8" OD Compression x 3/8" OD Compression x 1/4” OD Compression, Operating Temperature: -65°- 250° F at maximum operating, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 1/4” OD Tube, all three ends, Operating Temperature: -65°- 250° F at maximum operating, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 3/8” OD Tube, all three ends, Operating Temperature: -65°- 250° F at maximum operating, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
Size: 1/2" OD Tube, all three ends, Operating Temperature: -65°- 250° F at maximum operating, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing
64-10X_STD.jpg5/8 OD Compression Tee
Locke Part #: H0633MFG Part #: 64-10X Compare
Size: 5/8” OD Tube, all three ends, Operating Temperature: -65°- 250° F at maximum operating, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing 26613135311
69-6-6X.jpg3/8 OD x 3/8 MIP Compression Male Elbows
Locke Part #: H0634MFG Part #: 69-6-6X Compare
Size: 3/8” OD Tube x 3/8” M.I.P., Operating Temperature: -65°- 250° F at maximum operating temperatures, Vibration: Fair vibration resistance 26613136325
Size: 3/8” OD Flare (9/16-24 Fine Thread), Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared
FC-6.jpg3/8 OD Fine Thread Flare Caps
Locke Part #: H0636MFG Part #: FC-6 Compare
Size: 3/8” OD Flare (9/16-24 Fine Thread), Operating Temperature: -65°- 250° F at maximum operating pressures, Vibration: Good vibration resistance* Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared 26613059037
FRC13-6-8.jpg3/8 OD x 1/2 MIP Fine Thread Flare Male Adaptors
Locke Part #: H0638MFG Part #: FRC13-6-8 Compare
Size: 3/8" OD Tube (9/16-24 Thread) x 1/2" M.I.P (Tapped 3/8" F.I.P), Finish: Rough, Quantity: 10, Weight (LBS): 0.8 26613004778
Size: 3/8" OD Tube (9/16-24 Thread) x 3/8" M.I.P (Tapped 1/8" F.I.P), Finish: Rough, Quantity: 10, Weight (LBS): 0.6 026613004761
Size: 3/8" OD Tube (9/16-24 Thread) x 1/2" F.I.P, Finish: Rough, Quantity: 10, Weight (LBS): 0.7 26613004808
NV104-4-2.jpgNEV2-C1 CMP TO MIP ANG NDL
Locke Part #: H0643MFG Part #: NV104-4-2 Compare
Size: 1/4” O.D. Compression x 1/8” M.I.P., Operating Temperature: -65°- 250° F, Working Pressure: 150 PSI maximum, Water Applications: 40° F to 140° F, 115° F maximum continuous use temperature Positive sealing & flow adjustment up to the capacity of the valve, Metal-to-metal seats with a fine thread engagement, For use with automotive & industrial applications for instrumentation, hydraulic and pneumatic systems., Not intended for use with natural gas, LPG (liquefied petroleum gas or propane), nuclear or avionic (aircraft) applications 26613078465
PNEV-NCV.jpgSELFPIERCINGTAPVAL3/8TO1
Locke Part #: H0644MFG Part #: PNEV-NCV Compare
Operating Temperature: -65°- 250° F, Tubing Diameter: Use with 3/8” to 1” OD tubing, Working Pressure: Up to 150 PSI, Water Applications: 40° F to 140° F, 115° F maximum continuous use temperature Positive sealing & flow adjustment up to the capacity of the valve, Metal-to-metal seats with a fine thread engagement, Compliant needle valve options available for California and Vermont low-lead requirements, For use with automotive & industrial applications for instrumentation, hydraulic and pneumatic systems, Not intended for use with natural gas, LPG (liquefied petroleum gas or propane), nuclear or avionic (aircraft) applications, Kit Includes:, Needle valve, Saddle clamp, (2) Nuts, (2) Bolts, Washers, Brass compression sleeve for copper installations, Plastic sleeve/brass insert for plastic tube installations 26613078687
Product Image Not Available3/4 Female Swivel Hose Adaptors (FIP End)
Locke Part #: H0645MFG Part #: HUS11-12-12X Compare
Size: 3/4” Female Hose Thread (swivel) x 3/4" F.I.P, Finish: Rough, Operating Temperature: -35°- 100° F, Working Pressure: 75 psi maximum, intermittent to 150 psi For use with residential and commercial grade garden hose., All female hose thread connections require a rubber washer (sold separately) inserted prior to installation 26613137698
Product Image Not Available3/4 Male Hose Adaptors (MIP End)
Locke Part #: H0651MFG Part #: HU22-12-12TPX Compare
Size: 3/4” Male Hose Thread x 3/4" M.I.P, Finish: Rough, Operating Temperature: -35°- 100° F, Working Pressure: 75 psi maximum, intermittent to 150 psi For use with residential and commercial grade garden hose., All female hose thread connections require a rubber washer (sold separately) inserted prior to installation 26613149998
Product Image Not Available3/4 Female Hose Adaptors (FIP End)
Locke Part #: H0652MFG Part #: HU11-12-12X Compare
Size: 3/4” F.I.P x 3/4” Female Hose Thread, Finish: Rough, Operating Temperature: -35°- 100° F, Working Pressure: 75 psi maximum, intermittent to 150 psi 26613149813
NV105-4X.jpgCMP TO CMP STR NDL VAL 1/4 OD
Locke Part #: H0654MFG Part #: NV105-4X Compare
Size: 1/4” OD Tube, both ends, Operating Temperature: -65°- 250° F, Working Pressure: Up to 150 PSI, Water Applications: 40° F to 140° F, 115° F maximum continuous use temperature Positive sealing & flow adjustment up to the capacity of the valve, Metal-to-metal seats with a fine thread engagement, Compliant needle valve options available for, California and Vermont low-lead requirements, Use with automotive & industrial applications for instrumentation, hydraulic and pneumatic systems., Not intended for use with natural gas, LPG (liquefied petroleum gas or propane), nuclear or avionic (aircraft) applications, 115 F maximum continuous use temperature 26613137490
NV105-4X.jpgCMP TO CMP STR NDL VAL 3/8 OD
Locke Part #: H0655MFG Part #: NV105-6X Compare
Size: 3/8” OD Tube, both ends, Operating Temperature: -65°- 250° F, Working Pressure: Up to 150 PSI, Water Applications: 40° F to 140° F, 115° F maximum continuous use temperature Positive sealing & flow adjustment up to the capacity of the valve, Metal-to-metal seats with a fine thread engagement, Compliant needle valve options available for, California and Vermont low-lead requirements, Use with automotive & industrial applications for instrumentation, hydraulic and pneumatic systems., Not intended for use with natural gas, LPG (liquefied petroleum gas or propane), nuclear or avionic (aircraft) applications, 115 F maximum continuous use temperature 26613137483
Size: 5/8” OD Flare (15/16-16 Thread) x 3/4” F.I.P, Operating Temperature: -40° to 150° F, Pressure: Up to 1/2 psi maximum
Size: 5/8” OD Flare (15/16-16 Thread) x 3/4” M.I.P (1/2” F.I.P Tapped), Operating Temperature: -40° to 150° F, Pressure: Up to 1/2 psi maximum
MAU2-10-8S.jpgFL M UN BR 5/8 OD TB X 1/2
Locke Part #: H0658MFG Part #: MAU2-10-8S Compare
Size: 5/8” OD Flare (15/16-16 Thread) x 1/2” M.I.P, Operating Temperature: -40° to 150° F, Pressure: Up to 1/2 psi maximum 26613082684
MAU1-10-8S.jpgFL F UN BR 5/8 OD TB X 1/2
Locke Part #: H0659MFG Part #: MAU1-10-8S Compare
Size: 5/8” OD Flare (15/16-16 Thread) x 1/2” F.I.P, Operating Temperature: -40° to 150° F, Pressure: Up to 1/2 psi maximum 26613088570
69-6-6X.jpg3/8 OD x 1/2 MIP Compression Male Elbows
Locke Part #: H0660MFG Part #: 69-6-8 Compare
Size: 3/8” OD Tube x 1/2” M.I.P. 26613006772
70-6-8X.jpg3/8" OD Tube x 1/2" F.I.P Reducing Elbow
Locke Part #: H0661MFG Part #: 70-6-8 X Compare
Size: 3/8" OD Tube x 1/2" F.I.P, Finish: Rough, Quantity: 10, Weight (LBS): 1.3 026613148809
120-8X_STD.jpg1/2 FIP X 1/2 MIP ADAPTER
Locke Part #: H0665MFG Part #: 120-8X Compare
Size: 1/2" F.I.P x 1/2" M.I.P, Finish: Rough, Quantity: 25, Weight (LBS): 2.6 26613146249
WB07-24_STD.jpg3/4FIP X 3/4PEX X24 COPPER WHC
Locke Part #: L0006MFG Part #: WB07-24 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 24, Quantity: 25, Weight (LBS): 16.5 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection 26613100661
WB07-18.jpg3/4FIP X 3/4PEX X18 COPPER WHC
Locke Part #: L0008MFG Part #: WB07-18 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 18, Quantity: 25, Weight (LBS): 20.1 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection 26613048871
WB034-12N.jpg3/4FIP X3/4NOM M/FSWT X12 CPR
Locke Part #: L0009MFG Part #: WB034-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply 26613089409
Size: 7/8” OD X 18” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
WB034-18N.jpg3/4FIP X3/4NOM M/FSWT X18 CPR
Locke Part #: L0011MFG Part #: WB034-18N Compare
Size: 7/8” OD X 18” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply 26613089423
WB034-24N.jpg3/4FIP X3/4NOM M/FSWT X24 CPR
Locke Part #: L0012MFG Part #: WB034-24N Compare
Size: 7/8” OD X 24” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply 26613093710
WRJ.jpgDIELECTRIC WASHER
Locke Part #: L0013MFG Part #: WRJ Compare
26613051963
CSSB21-24.jpgGAS CONN 3/4"FIPX3/4"MIP X24"
Locke Part #: L0669MFG Part #: CSSB21-24 Compare
Size: 3/4” ID (7/8” OD) with 3/4” F.I.P x 3/4” M.I.P fittings, Length (in): 24, Operating Temperature: -40°- 150° F, Pressure: standard line pressures up to 1/2 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning, plumbing repair and masonry products., UV rays & salt resistant, ProCoat connectors are certified for indoor & outdoor use., Greater strength & flexibility with greater depth & number of corrugations to withstand greater torque & bend cycles, Outperforms industry standards for torsion (1.5X) without compromising the integrity of the coating or connector, Outperforms industry standard for repeated bending (2X) without compromising the integrity of the coating or connector, One-piece construction has no soldered of brazed joints, Smoother, burnished flare on connector ends seal with less torque, Uniform coat over entire length of connector for complete corrosion resistance of the stainless steel core, 100% leak tested, For use with indoor and outdoor connections of gas appliances to gas piping system, May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures 26613118413
WB00-12N.jpg3/4FIP X 3/4FIP X12 COPPER WHC
Locke Part #: L0958MFG Part #: WB00-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only) 26613089287
Size: 7/8” OD X 24” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
60PT-4_STD.jpg1/4-in OD Tube Sleeves for Plastic Tube
Locke Part #: M0035MFG Part #: 60PT-4 Compare
Size: 1/4” OD Tube, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum For use with PEX, vinyl and polyethylene tubing in potable water distribution systems, Not intended for use with steel, copper or aluminum tubing 26613005997
63PT-4X.jpgBrass Insert For 1/4” OD Plastic Tubing
Locke Part #: M0036MFG Part #: 63PT-4 X Compare
Size: 1/4” OD Tube, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Available in a broad range of sizes and styles, Fitting does not require any flaring, soldering, or other type of tubing preparation, No Lead, For use in potable water, instrumentation, hydraulic, and pneumatic systems., For use with plastic tubing in potable water distribution systems. Not intended for use with non-plastic tubing.
TBV12F_BTY.jpgFULL PORT 3/4" GAS BALL VALVE
Locke Part #: M0464MFG Part #: TBV12F Compare
Size: 3/4” F.I.P x 3/4” F.I.P, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Full flow operation. Full port design provides abundant water flow without obstruction, Blow-out proof stem is assembled from the inside with double o-rings to provide reliable performance, Heavy duty forged brass body, Right-sized handles ensures on-off operation even in tight installations, For use with natural, manufactured, mixed, liquefied-petroleum (LP) gas and LP gas-air mixtures. 26613139609
S1-72DW612 F_INL.jpgSTAINLESS BRD 3/8X3/8CMP W/2
Locke Part #: M0649MFG Part #: S1-72DW612 F Compare
Kit contains:, (1) 3/8 comp. x 3/8 comp. stainless steel dishwasher connector - 72" length, (1) 3/8 comp. x 3/4" hose fitting, (1) 3/8 comp. x 3/8 MIP fitting 26613159850
Size: 1/4” compression x 1/4” compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.245” ID (0.470” OD) Engineered polymer braided fibers bend freely without kinking or crimping, 100% No Lead, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, TPE inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only.
Size: 1/4” compression x 1/4” compression, Length (in): 72, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.245” ID (0.470” OD) Engineered polymer braided fibers bend freely without kinking or crimping, 100% No Lead, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, TPE inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only.
Size: 3/8” Compression x 3/8” Compression with 3/8” M.I.P. Elbow, Length (in): 72, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only
Size: 3/4” female hose thread x 3/4” female hose thread, Length (in): 48, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only
Size: 3/4” female hose thread x 3/4” female hose thread, Length (in): 60, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only
BC96X.jpgSelf-Piercing Needle Valve Kits
Locke Part #: M0818MFG Part #: BC96X Compare
Finish: Rough, Quantity: 5, Weight (LBS): 3.5 Kit Includes:, Saddle Clamp w/Self-Locking Nuts, 1/4" OD x 25' Polyethylene Tube, Brass Sleeve & Inserts & Delrin Sleeve, 1/4" OD Union. 26613148977
Size: 3/4” female hose thread, swivel x 3/8” OD compression, Finish: Rough, Operating Temperature: 40°- 140° F, intermittent to 180° F, Working Pressure: 125 PSI maximum One-piece brass body provides strength, durability, and longer-lasting performance, Swivel hose thread nut simplifies fitting alignment to make the water connector installation quick and easy, High-temperature resistant washer for a reliable, longer-lasting performance, No Lead, To connect Whirlpool, Maytag, Amana, Kitchen Aid, and Jenn-Air dishwashers manufactured after September 2009 to flexible water connector., All female hose thread connections require a rubber washer inserted prior to installation.
SC2190.jpgFlat Bibb Washer Assortment w/Screws
Locke Part #: M4000MFG Part #: SC2190 Compare
Weight (Lbs): 3.76, Quantity: 50, Cube (Ft): 0.49, Shelf Pack - Quantity: 5, Shelf Pack - Weight (Lbs): 0.26 Includes: 39166039685
SC0596.jpgO-Ring Assortment
Locke Part #: M4012MFG Part #: SC0596 Compare
Finish: Black, Packaging: 14 Per Card, Material: Rubber Made of high quality rubber, Comes in seven most popular sizes, Includes:, (2) SC0562, (2) SC0561, (2) SC0575, (2) SC0584, (2) SC0584, (2) SC0571, (1) SC0541, (1) SC0618. 39166039661
Size: 1/2” Nom cold expansion barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, 100% Leak tested, No Lead, Corrosion-resistant handle is plated in an attractive chrome finish, Positive 1/4 turn shut off, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, PEX end designed to ASTM F1960, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
G2CEPX14X C_STD.jpgSTRAIGHT STOP W/CLD EXPANSION BARB
Locke Part #: R1283MFG Part #: G2CEPX14X C Compare
Size: 1/2” Nom cold expansion barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, 100% Leak tested, No Lead, PEX end designed to ASTM F1960, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F. 26613141565