Loading ...

Product Image Not Available 046 16X20X4 FILTER BOX
Locke Part #: L6168MFG Part #: 0461620
Product Image Not Available 046 20X20X30 FILTER BX R6
Locke Part #: L6193MFG Part #: 046R62020
054G UPFLOW FILTER BASE 14X25 4"HI
Locke Part #: L3988MFG Part #: 054G14254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 14X25 6"HI
Locke Part #: L3978MFG Part #: 054G14256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
054G UPFLOW FILTER BASE 16X25 4"HI
Locke Part #: L3989MFG Part #: 054G16254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 16X25 6"HI
Locke Part #: L3979MFG Part #: 054G16256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
054G UPFLOW FILTER BASE 20X25 4"HI
Locke Part #: L3991MFG Part #: 054G20254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 20X25 6"HI
Locke Part #: L3981MFG Part #: 054G20256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
054G UPFLOW FILTER BASE 24X24 4"HI
Locke Part #: L3990MFG Part #: 054G24244
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 24X24 6"HI
Locke Part #: L3980MFG Part #: 054G24246
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 14X20 4"HI
Locke Part #: L3992MFG Part #: 055E14204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLOW FILTER BASE 14X20 6"HI
Locke Part #: L3982MFG Part #: 055E14206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 16X20 4"HI
Locke Part #: L3993MFG Part #: 055E16204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLOW FILTER BASE 16X20 6"HI
Locke Part #: L3983MFG Part #: 055E16206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 20X20 4"HI
Locke Part #: L3994MFG Part #: 055E20204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLOW FILTER BASE 20X20 6"HI
Locke Part #: L3984MFG Part #: 055E20206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 20X25 4"HI
Locke Part #: L3995MFG Part #: 055E20254
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLW FB(20X20) 3TR23X22 4"HI
Locke Part #: L3968MFG Part #: 055E2322-3TR
055EN UPFLOW FILTER BASE 20X25 6" HI N
Locke Part #: L3985MFG Part #: 055E20256N
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
Product Image Not Available 093PWC 4X5X4X10 DLSC LINESET COVER
Locke Part #: L7491MFG Part #: 093PWC45410
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable
1/2" x 1.5" x 10' Formed Angle
Locke Part #: L6123MFG Part #: 06341410
Standard 28 GA Galvanized Metal (26ga avail), All sold in 10 lengths with various widths, 10 pcs per bundle
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
10" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7027MFG Part #: 1252610
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
10" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7015MFG Part #: 1252810
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
10" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0127MFG Part #: 12510
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
10" Ductboard Triangle
Locke Part #: L6101MFG Part #: 10" DUCT BRD TI
10" Inline Adjustable Damper
Locke Part #: L7037MFG Part #: 32010
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
10" Spiral Pipe Coupling
Locke Part #: L7242MFG Part #: 11810
10" Spiral Pipe End Cap
Locke Part #: L7232MFG Part #: 119S10
10" Starting Collar For Ductboard
Locke Part #: L0044MFG Part #: 55010
10" x 10" x 10" Furnace Tee
Locke Part #: L1207MFG Part #: 825101010
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
10" x 10" x 10" Wye
Locke Part #: L0236MFG Part #: 800101010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 10" x 6" Wye
Locke Part #: L0233MFG Part #: 80010106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 10" x 7" Insulated Register Boot
Locke Part #: L0177MFG Part #: 64510107
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
10" x 10" x 8" Hi Side Insulated Boot
Locke Part #: L7048MFG Part #: 64810108
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
10" x 10" x 8" Insulated Register Boot
Locke Part #: L0159MFG Part #: 64510108
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
30 GA Galvanized Steel, 1 Flange for Rails
10" x 10" x 8" Wye
Locke Part #: L0235MFG Part #: 80010108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Increase type with flange & damper
10" x 4" x 4" Concrete Box
Locke Part #: L0259MFG Part #: 2514104
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
10" x 4" x 6" Concrete Box
Locke Part #: L0265MFG Part #: 2514106
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
10" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7006MFG Part #: 1042610
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal, Collars are Hemmed
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
10" x 6" x 6" Wye
Locke Part #: L0240MFG Part #: 8001066
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal, Collars are Hemmed
10" x 8" Spiral Pipe Reducer
Locke Part #: L7221MFG Part #: 120108
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
10" x 8" x 6" Sealed Wye
Locke Part #: L7092MFG Part #: 8011086
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 6" Wye
Locke Part #: L0238MFG Part #: 8001086
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 7" Wye
Locke Part #: L0232MFG Part #: 8001087
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 8" Sealed Wye
Locke Part #: L7090MFG Part #: 8011088
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 8" Wye
Locke Part #: L0237MFG Part #: 8001088
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal, Collars are Hemmed
10" x 9" x 5" Wye
Locke Part #: L0234MFG Part #: 8001095
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 9" x 6" Wye
Locke Part #: L0241MFG Part #: 8001096
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 9" x 7" Wye
Locke Part #: L0239MFG Part #: 8001097
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10' "S" Cleat for Rectangular Duct
Locke Part #: L0073MFG Part #: 03010
10' Drive Cleat for Rectangular Duct
Locke Part #: L0074MFG Part #: 0352610
Product Image Not Available 12 X 24 X 6 DUCT BOARD BOX
Locke Part #: L6107MFG Part #: L6107
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
12" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7028MFG Part #: 1252612
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
12" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0128MFG Part #: 12512
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
12" Ductboard Triangle
Locke Part #: L6102MFG Part #: 12" DUCT BD TRI
12" Inline Adjustable Damper
Locke Part #: L7038MFG Part #: 32012
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
12" Spiral Pipe Coupling
Locke Part #: L7243MFG Part #: 11812
12" Spiral Pipe End Cap
Locke Part #: L7233MFG Part #: 119S12
12" Spiral Pipe Hanger
Locke Part #: L7257MFG Part #: 07612
12" Starting Collar For Ductboard
Locke Part #: L0045MFG Part #: 55012
Constructed of Galvanized Metal, Collars are Hemmed
12" x 10" Spiral Pipe Reducer
Locke Part #: L7222MFG Part #: 120108
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
12" x 10" x 10" Sealed Wye
Locke Part #: L7091MFG Part #: 801121010
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 10" Wye
Locke Part #: L0244MFG Part #: 800121010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 6" Wye
Locke Part #: L0247MFG Part #: 80012106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 8" Sealed Wye
Locke Part #: L7094MFG Part #: 80112108
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 8" Wye
Locke Part #: L0246MFG Part #: 80012108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 12" x 10" Insulated Register Boot
Locke Part #: L0182MFG Part #: 645121210
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
12" x 12" x 12" Furnace Tee
Locke Part #: L1208MFG Part #: 825121212
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
12" x 12" x 12" Wye
Locke Part #: L0243MFG Part #: 800121212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 12" x 6" Wye
Locke Part #: L0242MFG Part #: 80012126
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 12" x 8" Wye
Locke Part #: L0248MFG Part #: 80012128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
12" x 4" x 6" Concrete Box
Locke Part #: L0266MFG Part #: 2514126
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
12" x 4" x 8" Concrete Box
Locke Part #: L0267MFG Part #: 2514146
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
12" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7007MFG Part #: 1042612
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
12" x 8" x 8" Insulated Register Boot
Locke Part #: L0195MFG Part #: 6458128
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
12" x 8" x 8" Sealed Wye
Locke Part #: L7093MFG Part #: 8011288
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 8" x 8" Wye
Locke Part #: L0245MFG Part #: 8001288
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
12" x 9" x 9" Wye
Locke Part #: L0263MFG Part #: 8001299
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Product Image Not Available 14 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6150MFG Part #: L6150
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
14" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7029MFG Part #: 1252414
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
14" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0129MFG Part #: 12514
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
14" Ductboard Triangle
Locke Part #: L6103MFG Part #: 14" DUCT BD TRI
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
14" Spiral Pipe Coupling
Locke Part #: L7244MFG Part #: 11814
14" Spiral Pipe End Cap
Locke Part #: L7234MFG Part #: 119S14
14" Spiral Pipe Hanger
Locke Part #: L7258MFG Part #: 07614
14" Starting Collar For Ductboard
Locke Part #: L0046MFG Part #: 55014
14" Starting Collar with Damper
Locke Part #: L7054MFG Part #: 548 14"
14" x 10" x 10" Wye
Locke Part #: L0208MFG Part #: 800141010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal, Collars are Hemmed
14" x 12" Spiral Pipe Reducer
Locke Part #: L7223MFG Part #: 1201412
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
14" x 12" x 10" Wye
Locke Part #: L0253MFG Part #: 800141210
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
14" x 12" x 12" Wye
Locke Part #: L0252MFG Part #: 800141212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
14" x 12" x 8" Wye
Locke Part #: L0254MFG Part #: 80014128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
14" x 14" x 12" Insulated Register Boot
Locke Part #: L0175MFG Part #: 645141412
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
14" x 14" x 12" Wye
Locke Part #: L0251MFG Part #: 800141412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
14" x 14" x 14" Furnace Tee
Locke Part #: L1209MFG Part #: 825141414
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
14" x 4" x 6" Concrete Box
Locke Part #: L0270MFG Part #: 2514128
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
14" x 4" x 8" Concrete Box
Locke Part #: L0271MFG Part #: 2514148
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
14" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7008MFG Part #: 1042614
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
30 GA Galvanized Steel, 1 Flange for Rails
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Product Image Not Available 15" FLEX DUCT SADDLE
Locke Part #: L6120MFG Part #: L6120
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
1 Flange on All Four Sides for Easy Attachment, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Available Lined or Unlined- Must Specify the R Value of Liner, Standard Height 30 Unless Otherwise Specified
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
16" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7030MFG Part #: 1252416
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
16" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L0130MFG Part #: 12516
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
16" Ductboard Triangle
Locke Part #: L6104MFG Part #: 16" DUCT BD TRI
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
16" Spiral Pipe Coupling
Locke Part #: L7245MFG Part #: 11816
16" Spiral Pipe End Cap
Locke Part #: L7235MFG Part #: 119S16
16" Starting Collar For Ductboard
Locke Part #: L0054MFG Part #: 55016
Constructed of Galvanized Metal, Collars are Hemmed
16" x 14" Spiral Pipe Reducer
Locke Part #: L7224MFG Part #: 1201614
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
16" x 14" x 12" Wye
Locke Part #: L0264MFG Part #: 800161412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
16" x 14" x 14" Wye
Locke Part #: L0256MFG Part #: 800161414
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
16" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7009MFG Part #: 1042416
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
18" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7031MFG Part #: 1252418
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
18" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0131MFG Part #: 12518
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
18" Ductboard Triangle
Locke Part #: L6105MFG Part #: 18" DUCT BD TRI
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
18" Spiral Pipe Coupling
Locke Part #: L7246MFG Part #: 11818
18" Spiral Pipe End Cap
Locke Part #: L7236MFG Part #: 119S18
18" x 14" x 14" Wye
Locke Part #: L0255MFG Part #: 800181414
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal, Collars are Hemmed
18" x 16" Spiral Pipe Reducer
Locke Part #: L7225MFG Part #: 1201816
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
18" x 18" x 16" Wye
Locke Part #: L0249MFG Part #: 800181816
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
18" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7010MFG Part #: 1042418
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of Galvanized Metal, 4 collar outlet on bottom and top, Fixed or Telescopic, Telescopic style extends to 10, #798T is 2 x 6 to 4 round, #798 also in 3 x6.5 to 4 round(not telescopic)
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Product Image Not Available 20 1/4 X 20 1/4 X 6 DUCT BD BX
Locke Part #: L6106MFG Part #: 20-1/4X20-1/4X6
Product Image Not Available 20 X 10 ROUGH-IN RET AIR FRAME
Locke Part #: L6153MFG Part #: L6153
1 Flange on All Four Sides for Easy Attachment, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Available Lined or Unlined- Must Specify the R Value of Liner, Standard Height 30 Unless Otherwise Specified
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
20" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L0132MFG Part #: 12520
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
20" Duct Strap Saddle
Locke Part #: L6121MFG Part #: 072620
Standard 28 GA Galvanized Metal, Available in 6 x20 and 6 x30
20" Long, 28 Gauge "W" Brace
Locke Part #: L0031MFG Part #: 071320
20" Spiral Pipe Coupling
Locke Part #: L7247MFG Part #: 11820
20" Spiral Pipe End Cap
Locke Part #: L7237MFG Part #: 119S20
Constructed of Galvanized Metal, Collars are Hemmed
20" x 18" Spiral Pipe Reducer
Locke Part #: L7226MFG Part #: 1202018
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
20" x 20" x 18" Wye
Locke Part #: L0250MFG Part #: 800202018
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
20" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7011MFG Part #: 1042420
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
22" Spiral Pipe Coupling
Locke Part #: L7248MFG Part #: 11822
22" x 20" Spiral Pipe Reducer
Locke Part #: L7227MFG Part #: 1202220
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
22" x 24" Spiral Pipe Reducer
Locke Part #: L7228MFG Part #: 1202422
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Product Image Not Available 225 10X6X6 END BOOT W/FLANGE
Locke Part #: L7482MFG Part #: 2256106
Product Image Not Available 225 12X6X7 END BOOT W/FLANGE
Locke Part #: L7483MFG Part #: 2256127
Product Image Not Available 225 14X6X8 END BOOT W/ FLANGE
Locke Part #: L7484MFG Part #: 2256148
Product Image Not Available 225 14X8X9 END BOOT W/FLANGE
Locke Part #: L7485MFG Part #: 2258149
Product Image Not Available 225 8X4X5 END BOOT W/FLANGE
Locke Part #: L7481MFG Part #: 225485
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Product Image Not Available 235 10X6X6 90DEG BOOT W/FLANGE
Locke Part #: L7487MFG Part #: 2356106
Product Image Not Available 235 12X6X7 90DEG BOOT W/F;ANGE
Locke Part #: L7488MFG Part #: 325 12X6X7
Product Image Not Available 235 14X6X8 90DEG BOOT W/FLANGE
Locke Part #: L7489MFG Part #: 235 14X6X8
Product Image Not Available 235 14X8X9 90DEG BOOT S/FLANGE
Locke Part #: L7490MFG Part #: 235 14X8X9
Product Image Not Available 235 8X4X5 90 DEG BOO W/FLANGE
Locke Part #: L7486MFG Part #: 235 8X4X5
Product Image Not Available 237 4X10X6 ANGLE BOOT W/BRACE
Locke Part #: L0140MFG Part #: 2374106
Product Image Not Available 237 4X12X7 ANGLE BOOT W/BRACE
Locke Part #: L0141MFG Part #: 2374127
Product Image Not Available 24 X 12 ROUGH-IN RET AIR FRAME
Locke Part #: L6152MFG Part #: L6152
Product Image Not Available 24 X 24 X 6 DUCT BOARD BOX
Locke Part #: L6108MFG Part #: L6108
24" Spiral Pipe Coupling
Locke Part #: L7249MFG Part #: 11824
Product Image Not Available 25 X 16 ROUGH-IN RET AIR FRAME
Locke Part #: L6154MFG Part #: L6154
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal
Can be used on Register Boxes, Boots and Insulated boxes., Snaps to all fours sides so box can be Installed to run in either direction
3" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0120MFG Part #: 1253
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Plain round galvanized pipe, Constructed of 30 GA or 28 GA Galvanized Metal
3" x 3" x 3" Furnace Tee
Locke Part #: L1200MFG Part #: 825333
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
26GA Galvanized or Paint Grip, Available with cap, Easy Mounting Flange
Constructed of Galvanized Metal, 4 collar outlet on bottom and top, Fixed or Telescopic, Telescopic style extends to 10, #798T is 2 x 6 to 4 round, #798 also in 3 x6.5 to 4 round(not telescopic)
3-1/4 x 10" to 7" Round Transition
Locke Part #: L3509MFG Part #: 20132107
Product Image Not Available 30 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6151MFG Part #: L6151
30" Duct Strap Saddle
Locke Part #: L6122MFG Part #: 072630
Standard 28 GA Galvanized Metal, Available in 6 x20 and 6 x30
30" x 30" Bottom Outlet Drain Pan Center
Locke Part #: L6112MFG Part #: 060B3030
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable
36 x 36 Bottom Outlet Drain Pan
Locke Part #: L6079MFG Part #: 0603636
36 x 72 Bottom Outlet Drain Pan
Locke Part #: L6080MFG Part #: 060L3672
4" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7021MFG Part #: 125264
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
4" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7012MFG Part #: 125284
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
4" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0121MFG Part #: 1254
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
4" Single Wall Cap
Locke Part #: L0015MFG Part #: 9504
Galvanized Steel Formed Material, Options Available: Screen
4" Single Wall Roof Cap
Locke Part #: L0023MFG Part #: 9304
30 GA Galvanized Steel, 1 Flange for Rails
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Plain round galvanized pipe, Constructed of 30 GA or 28 GA Galvanized Metal
30 GA Galvanized Steel, 1 Flange for Rails
30 GA Galvanized Steel, 1 Flange for Rails
Constructed of Galvanized Metal, Collars are Hemmed
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
4" x 4" x 4" Furnace Tee
Locke Part #: L1201MFG Part #: 825444
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
4" x 8" x 5" Insulated Register Boot
Locke Part #: L0154MFG Part #: 645485
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
30 GA Galvanized Steel, 1 Flange for Rails
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Features, :, No trim-ring piece is needed, Eliminator one elbow, Gain 6' of Allowable Duct Run, Reduce Call Backs, Flex is protected from getting crushed, Surface is paintable, no masking needed, Reduces the fire hazard, Applauded by Mechanical Inspectors, Over 2 Million Dryerboxes installed, Convenient Duct Support Tab, UL Classified for a one hour wall, Made in the USA, Deep drawn with .031 aluminized steel (21 gauge), For Use, :, Dryer vent hose receptacle, Doubles as gas connection receptacle, Meets code requirements as a clean-out
48" Long, 28 Gauge "W" Brace
Locke Part #: L0026MFG Part #: 071348
5" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0122MFG Part #: 1255
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
5" Single Wall Cap
Locke Part #: L0016MFG Part #: 9505
Galvanized Steel Formed Material, Options Available: Screen
5" Single Wall Roof Cap
Locke Part #: L0024MFG Part #: 9305
5" Starting Collar For Ductboard
Locke Part #: L0077MFG Part #: 5505
Constructed of Galvanized Metal, Collars are Hemmed
5" x 4" x 4" Wye
Locke Part #: L0205MFG Part #: 800544
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
5" x 5" x 5" Furnace Tee
Locke Part #: L1202MFG Part #: 825555
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Features, :, No trim-ring piece is needed, Eliminator one elbow, Gain 6' of Allowable Duct Run, Reduce Call Backs, Flex is protected from getting crushed, Surface is paintable, no masking needed, Reduces the fire hazard, Applauded by Mechanical Inspectors, Over 2 Million Dryerboxes installed, Convenient Duct Support Tab, UL Classified for a one hour wall, Made in the USA, Deep drawn with .031 aluminized steel (21 gauge), For Use, :, Dryer vent hose receptacle, Doubles as gas connection receptacle, Meets code requirements as a clean-out
Features, :, No trim-ring piece is needed, Eliminator one elbow, Gain 6' of Allowable Duct Run, Flex is protected from getting crushed, Reduces the fire hazard, Surface is paintable, no masking needed, Reduce Call Backs, Applauded by Mechanical Inspectors, Over 2 Million Dryerboxes installed, Convenient Duct Support Tab, UL Classified for a one hour wall, Made in the USA, Deep drawn with .028 aluminized steel (22 gauge), For Use, :, Dryer vent hose receptacle, Doubles as gas connection receptacle, Meets code requirements as a clean-out
Product Image Not Available 550 7" DUCT BRD STR COLLAR
Locke Part #: L0041MFG Part #: 5507
Product Image Not Available 550 9" DUCT BRD STR COLLAR
Locke Part #: L0043MFG Part #: 5509
Product Image Not Available 551 10" DUCT BD START COLLAR
Locke Part #: L7470MFG Part #: 55110
Product Image Not Available 551 12" DUCT BD START COLLAR
Locke Part #: L7471MFG Part #: 55112
Product Image Not Available 551 14" DUCT BD START COLLAR
Locke Part #: L7472MFG Part #: 55114
Product Image Not Available 551 16" DUCT BD START COLLAR
Locke Part #: L7473MFG Part #: 55116
Product Image Not Available 551 18" DUCT BD START COLLAR
Locke Part #: L7474MFG Part #: 55118
Product Image Not Available 551 5" DUCT BD START COLLAR
Locke Part #: L7465MFG Part #: 5515
Product Image Not Available 551 6" DUCTBD START COLLAR
Locke Part #: L7466MFG Part #: 5516
Product Image Not Available 551 7" DUCT BD START COLLAR
Locke Part #: L7467MFG Part #: 5517
Product Image Not Available 551 8" DUCTBD START COLLAR
Locke Part #: L7468MFG Part #: 5518
Product Image Not Available 551 9" DUCT BD START COLLAR
Locke Part #: L7469MFG Part #: 5519
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
6" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7023MFG Part #: 125266
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
6" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0123MFG Part #: 1256
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
6" Inline Adjustable Damper
Locke Part #: L7033MFG Part #: 3206
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
6" Single Wall Cap
Locke Part #: L0017MFG Part #: 9506
Galvanized Steel Formed Material, Options Available: Screen
6" Single Wall Roof Cap
Locke Part #: L0025MFG Part #: 9306
6" Spiral Pipe Coupling
Locke Part #: L7240MFG Part #: 1186
6" Spiral Pipe End Cap
Locke Part #: L7230MFG Part #: 119S6
6" Spiral Pipe Hanger
Locke Part #: L7254MFG Part #: 0766
6" Starting Collar For Ductboard
Locke Part #: L0040MFG Part #: 5506
6" Starting Collar with Damper
Locke Part #: L7050MFG Part #: 548 6"
6" x 10" x 6" Hi Side Insulated Boot
Locke Part #: L7041MFG Part #: 6486106
6" x 10" x 6" Insulated Register Boot
Locke Part #: L0157MFG Part #: 6456106
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
30 GA Galvanized Steel, 1 Flange for Rails
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
6" x 12" x 7" Hi Side Insulated Boot
Locke Part #: L7042MFG Part #: 6486127
6" x 12" x 7" Insulated Register Boot
Locke Part #: L0156MFG Part #: 6456127
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
30 GA Galvanized Steel, 1 Flange for Rails
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
6" x 12" x 8" Insulated Register Boot
Locke Part #: L0049MFG Part #: 6456128
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
30 GA Galvanized Steel, 1 Flange for Rails
6" x 14" x 8" Hi Side Insulated Boot
Locke Part #: L7043MFG Part #: 6486148
6" x 14" x 8" Insulated Register Boot
Locke Part #: L0155MFG Part #: 6456148
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
30 GA Galvanized Steel, 1 Flange for Rails
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of Galvanized Metal, Collars are Hemmed
6" x 4" x 4" Wye
Locke Part #: L0210MFG Part #: 800644
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
6" x 4' Furnace Pipe, 28 Gauge
Locke Part #: L7002MFG Part #: 104266
Constructed of Galvanized Metal, Collars are Hemmed
6" x 5" x 5" Wye
Locke Part #: L0212MFG Part #: 800655
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
6" x 6" x 4" Insulated Register Boot
Locke Part #: L0151MFG Part #: 645664
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
6" x 6" x 4" Wye
Locke Part #: L0209MFG Part #: 800664
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
6" x 6" x 5" Hi Side Insulated Boot
Locke Part #: L7040MFG Part #: 648665
6" x 6" x 5" Insulated Register Boot
Locke Part #: L0193MFG Part #: 645665
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
6" x 6" x 6" Furnace Tee
Locke Part #: L1203MFG Part #: 825666
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
6" x 6" x 6" Insulated Register Boot
Locke Part #: L0176MFG Part #: 645666
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
30 GA Galvanized Steel, 1 Flange for Rails
6" x 6" x 6" Sealed Wye
Locke Part #: L7086MFG Part #: 801666
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
6" x 6" x 6" Wye
Locke Part #: L0211MFG Part #: 800666
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Increase type with flange & damper
6' x 4" Tall Pitch Pan
Locke Part #: L6124MFG Part #: 0902644
26GA Galvanized Metal, Easy Mounting Flange
Product Image Not Available 641 6X12X6 INSUL BOOT
Locke Part #: L7454MFG Part #: 6416126
Product Image Not Available 641 6X12X8 INSUL BOOT
Locke Part #: L7455MFG Part #: 6416128
Product Image Not Available 651-R8 12X12X10 INSUL BX 28GA
Locke Part #: L7426MFG Part #: 651R828121210
7" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0124MFG Part #: 1257
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
7" Aluminum Vent Cap
Locke Part #: L0201MFG Part #: 9537SD
Galvanized, Paint Grip or Aluminum Construction., Multiple Options Available: With Seamed Neck Extension and Back Plate, With Screen, With Backdraft Damper.
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
7" Inline Adjustable Damper
Locke Part #: L7034MFG Part #: 3207
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
7" x 4' Furnace Pipe, 28 Gauge
Locke Part #: L7003MFG Part #: 104267
Constructed of Galvanized Metal, Collars are Hemmed
7" x 5" x 5" Sealed Wye
Locke Part #: L7087MFG Part #: 801755
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
7" x 5" x 5" Wye
Locke Part #: L0213MFG Part #: 800755
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal, Collars are Hemmed
7" x 6" x 4" Wye
Locke Part #: L0217MFG Part #: 800764
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
7" x 6" x 5" Wye
Locke Part #: L0218MFG Part #: 800765
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
7" x 6" x 6" Wye
Locke Part #: L0214MFG Part #: 800766
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
7" x 7" x 6" Wye
Locke Part #: L0215MFG Part #: 800776
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
7" x 7" x 7" Furnace Tee
Locke Part #: L1204MFG Part #: 825777
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
7" x 7" x 7" Wye
Locke Part #: L0216MFG Part #: 800777
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Product Image Not Available 786 10X6 UPPER COMBUST BOX W/ FLANGE
Locke Part #: L9010MFG Part #: 786610
Product Image Not Available 786L 14 X 4 LOWER COMBU BOX
Locke Part #: L9011MFG Part #: 786L
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
8" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7025MFG Part #: 125268
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
8" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0125MFG Part #: 1258
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
8" Air Duct Connector
Locke Part #: L0085MFG Part #: 570-8"
Used as couplings between lengths of PVC warm air duct pipe.
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
8" Ductboard Triangle
Locke Part #: L6100MFG Part #: 8" DUCT BRD TRI
8" Inline Adjustable Damper
Locke Part #: L7035MFG Part #: 3208
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
8" Spiral Pipe Coupling
Locke Part #: L7241MFG Part #: 1188
8" Spiral Pipe End Cap
Locke Part #: L7231MFG Part #: 119S8
8" Spiral Pipe Hanger
Locke Part #: L7255MFG Part #: 0768
8" Starting Collar For Ductboard
Locke Part #: L0042MFG Part #: 5508
Increase type with flange & damper
8" x 14" x 9" Insulated Register Boot
Locke Part #: L0153MFG Part #: 6458149
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall