Loading ...

Search in: CODY CO INC

Product Image Not Available 046 16X20X4 FILTER BOX
Locke Part #: L6168MFG Part #: 0461620
Product Image Not Available 046 20X20X30 FILTER BX R6
Locke Part #: L6193MFG Part #: 046R62020
054G UPFLOW FILTER BASE 14X25 4"HI
Locke Part #: L3988MFG Part #: 054G14254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 14X25 6"HI
Locke Part #: L3978MFG Part #: 054G14256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
054G UPFLOW FILTER BASE 16X25 4"HI
Locke Part #: L3989MFG Part #: 054G16254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 16X25 6"HI
Locke Part #: L3979MFG Part #: 054G16256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
054G UPFLOW FILTER BASE 20X25 4"HI
Locke Part #: L3991MFG Part #: 054G20254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 20X25 6"HI
Locke Part #: L3981MFG Part #: 054G20256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
054G UPFLOW FILTER BASE 24X24 4"HI
Locke Part #: L3990MFG Part #: 054G24244
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty.
054G UPFLOW FILTER BASE 24X24 6"HI
Locke Part #: L3980MFG Part #: 054G24246
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 14X20 4"HI
Locke Part #: L3992MFG Part #: 055E14204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLOW FILTER BASE 14X20 6"HI
Locke Part #: L3982MFG Part #: 055E14206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 16X20 4"HI
Locke Part #: L3993MFG Part #: 055E16204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLOW FILTER BASE 16X20 6"HI
Locke Part #: L3983MFG Part #: 055E16206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 20X20 4"HI
Locke Part #: L3994MFG Part #: 055E20204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLOW FILTER BASE 20X20 6"HI
Locke Part #: L3984MFG Part #: 055E20206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
055E UPFLOW FILTER BASE 20X25 4"HI
Locke Part #: L3995MFG Part #: 055E20254
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty.
055E UPFLW FB(20X20) 3TR23X22 4"HI
Locke Part #: L3968MFG Part #: 055E2322-3TR
055EN UPFLOW FILTER BASE 20X25 6" HI N
Locke Part #: L3985MFG Part #: 055E20256N
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty
Product Image Not Available 093PWC 4X5X4X10 DLSC LINESET COVER
Locke Part #: L7491MFG Part #: 093PWC45410
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable
1/2” x 1.5" x 10’ Formed Angle
Locke Part #: L6123MFG Part #: 06341410
Standard 28 GA Galvanized Metal (26ga avail), All sold in 10 lengths with various widths, 10 pcs per bundle
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
10" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7027MFG Part #: 1252610
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
10" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7015MFG Part #: 1252810
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
10" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0127MFG Part #: 12510
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
10" Ductboard Triangle
Locke Part #: L6101MFG Part #: 10" DUCT BRD TI
10" Inline Adjustable Damper
Locke Part #: L7037MFG Part #: 32010
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
10" Spiral Pipe Coupling
Locke Part #: L7242MFG Part #: 11810
10" Spiral Pipe End Cap
Locke Part #: L7232MFG Part #: 119S10
10" Starting Collar For Ductboard
Locke Part #: L0044MFG Part #: 55010
10" x 10" x 10" Furnace Tee
Locke Part #: L1207MFG Part #: 825101010
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
10" x 10" x 10" Wye
Locke Part #: L0236MFG Part #: 800101010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 10" x 6" Wye
Locke Part #: L0233MFG Part #: 80010106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 10" x 7" Insulated Register Boot
Locke Part #: L0177MFG Part #: 64510107
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
10" x 10" x 8" Hi Side Insulated Boot
Locke Part #: L7048MFG Part #: 64810108
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
10" x 10" x 8" Insulated Register Boot
Locke Part #: L0159MFG Part #: 64510108
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
30 GA Galvanized Steel, 1 Flange for Rails
10" x 10" x 8" Wye
Locke Part #: L0235MFG Part #: 80010108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Increase type with flange & damper
10" x 4" x 4" Concrete Box
Locke Part #: L0259MFG Part #: 2514104
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
10" x 4" x 6" Concrete Box
Locke Part #: L0265MFG Part #: 2514106
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
10" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7006MFG Part #: 1042610
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal, Collars are Hemmed
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
10" x 6" x 6" Wye
Locke Part #: L0240MFG Part #: 8001066
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal, Collars are Hemmed
10" x 8" Spiral Pipe Reducer
Locke Part #: L7221MFG Part #: 120108
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
10" x 8" x 6" Sealed Wye
Locke Part #: L7092MFG Part #: 8011086
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 6" Wye
Locke Part #: L0238MFG Part #: 8001086
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 7" Wye
Locke Part #: L0232MFG Part #: 8001087
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 8" Sealed Wye
Locke Part #: L7090MFG Part #: 8011088
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 8" x 8" Wye
Locke Part #: L0237MFG Part #: 8001088
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal, Collars are Hemmed
10" x 9" x 5" Wye
Locke Part #: L0234MFG Part #: 8001095
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 9" x 6" Wye
Locke Part #: L0241MFG Part #: 8001096
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10" x 9" x 7" Wye
Locke Part #: L0239MFG Part #: 8001097
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
10’ "S" Cleat for Rectangular Duct
Locke Part #: L0073MFG Part #: 03010
10’ Drive Cleat for Rectangular Duct
Locke Part #: L0074MFG Part #: 0352610
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
12" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7028MFG Part #: 1252612
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
12" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0128MFG Part #: 12512
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
12" Ductboard Triangle
Locke Part #: L6102MFG Part #: 12" DUCT BD TRI
12" Inline Adjustable Damper
Locke Part #: L7038MFG Part #: 32012
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
12" Spiral Pipe Coupling
Locke Part #: L7243MFG Part #: 11812
12" Spiral Pipe End Cap
Locke Part #: L7233MFG Part #: 119S12
12" Spiral Pipe Hanger
Locke Part #: L7257MFG Part #: 07612
12" Starting Collar For Ductboard
Locke Part #: L0045MFG Part #: 55012
Constructed of Galvanized Metal, Collars are Hemmed
12" x 10" Spiral Pipe Reducer
Locke Part #: L7222MFG Part #: 120108
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
12" x 10" x 10" Sealed Wye
Locke Part #: L7091MFG Part #: 801121010
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 10" Wye
Locke Part #: L0244MFG Part #: 800121010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 6" Wye
Locke Part #: L0247MFG Part #: 80012106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 8" Sealed Wye
Locke Part #: L7094MFG Part #: 80112108
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 10" x 8" Wye
Locke Part #: L0246MFG Part #: 80012108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 12" x 10" Insulated Register Boot
Locke Part #: L0182MFG Part #: 645121210
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
12" x 12" x 12" Furnace Tee
Locke Part #: L1208MFG Part #: 825121212
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
12" x 12" x 12" Wye
Locke Part #: L0243MFG Part #: 800121212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 12" x 6" Wye
Locke Part #: L0242MFG Part #: 80012126
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 12" x 8" Wye
Locke Part #: L0248MFG Part #: 80012128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
12" x 4" x 6" Concrete Box
Locke Part #: L0266MFG Part #: 2514126
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
12" x 4" x 8" Concrete Box
Locke Part #: L0267MFG Part #: 2514146
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
12" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7007MFG Part #: 1042612
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
12" x 8" x 8" Insulated Register Boot
Locke Part #: L0195MFG Part #: 6458128
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
12" x 8" x 8" Sealed Wye
Locke Part #: L7093MFG Part #: 8011288
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
12" x 8" x 8" Wye
Locke Part #: L0245MFG Part #: 8001288
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
12" x 9" x 9" Wye
Locke Part #: L0263MFG Part #: 8001299
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Product Image Not Available 12 X 24 X 6 DUCT BOARD BOX
Locke Part #: L6107MFG Part #: L6107
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
14" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7029MFG Part #: 1252414
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
14" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0129MFG Part #: 12514
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
14" Ductboard Triangle
Locke Part #: L6103MFG Part #: 14" DUCT BD TRI
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
14" Spiral Pipe Coupling
Locke Part #: L7244MFG Part #: 11814
14" Spiral Pipe End Cap
Locke Part #: L7234MFG Part #: 119S14
14" Spiral Pipe Hanger
Locke Part #: L7258MFG Part #: 07614
14" Starting Collar For Ductboard
Locke Part #: L0046MFG Part #: 55014
14" Starting Collar with Damper
Locke Part #: L7054MFG Part #: 548 14"
14" x 10" x 10" Wye
Locke Part #: L0208MFG Part #: 800141010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of Galvanized Metal, Collars are Hemmed
14" x 12" Spiral Pipe Reducer
Locke Part #: L7223MFG Part #: 1201412
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
14" x 12" x 10" Wye
Locke Part #: L0253MFG Part #: 800141210
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
14" x 12" x 12" Wye
Locke Part #: L0252MFG Part #: 800141212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
14" x 12" x 8" Wye
Locke Part #: L0254MFG Part #: 80014128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
14" x 14" x 12" Insulated Register Boot
Locke Part #: L0175MFG Part #: 645141412
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
14" x 14" x 12" Wye
Locke Part #: L0251MFG Part #: 800141412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
14" x 14" x 14" Furnace Tee
Locke Part #: L1209MFG Part #: 825141414
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
14" x 4" x 6" Concrete Box
Locke Part #: L0270MFG Part #: 2514128
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
14" x 4" x 8" Concrete Box
Locke Part #: L0271MFG Part #: 2514148
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
14" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7008MFG Part #: 1042614
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
30 GA Galvanized Steel, 1 Flange for Rails
Product Image Not Available 14 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6150MFG Part #: L6150
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Product Image Not Available 15" FLEX DUCT SADDLE
Locke Part #: L6120MFG Part #: L6120
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable
16" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7030MFG Part #: 1252416
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
16" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L0130MFG Part #: 12516
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard
16" Ductboard Triangle
Locke Part #: L6104MFG Part #: 16" DUCT BD TRI
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes
16" Spiral Pipe Coupling
Locke Part #: L7245MFG Part #: 11816
16" Spiral Pipe End Cap
Locke Part #: L7235MFG Part #: 119S16
16" Starting Collar For Ductboard
Locke Part #: L0054MFG Part #: 55016
Constructed of Galvanized Metal, Collars are Hemmed
16" x 14" Spiral Pipe Reducer
Locke Part #: L7224MFG Part #: 1201614
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric.
16" x 14" x 12" Wye
Locke Part #: L0264MFG Part #: 800161412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
16" x 14" x 14" Wye
Locke Part #: L0256MFG Part #: 800161414
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .