Loading ...

Search in: ADVANCED DISTRIBUTOR PRODUCTS

Includes:, motor, housing, & blower wheel
100,000 BTU Commercial Unit Heater
Locke Part #: L6201MFG Part #: SEP100AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
115,000 BTU Commercial Unit Heater
Locke Part #: L6203MFG Part #: SEP115AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
125,000 BTU Separated Combustion Unit Heater
Locke Part #: L6702MFG Part #: FOAN125 NAT
Perfect for light commercial and greenhouse applications, Introduces clean combustible outside air when required., Wiring junction box is located outside of unit, Ideal for hard-to-heat applications where excessive dust, dirt, humidity, or negative pressure is a concern., Heating capacities from 45,000 300,000 BTUH, Up to 82% thermal efficiency., Compact cabinet design on 45,000 75,000 BTUH models., Hinged door allows easy access to components., Sidewall venting eliminates roof penetrations., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., Tubular heat exchangers made of aluminized steel., Power exhaust system allows horizontal venting to 25 ft., Direct drive propeller fans are dynamically balanced for quiet and smooth opera.
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
145,000 BTU Commercial Unit Heater
Locke Part #: L6204MFG Part #: SEP145AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
Embossed upflow cased coil, Right-hand service, with 410A piston., Anti-microbial drain pan with Microban ,
Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban
Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban
Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban
Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban
175,000 BTU Commercial Unit Heater
Locke Part #: L6205MFG Part #: SEP175AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Sloped drain pan for lower water retention., Downflow drip shields are molded into drain pan., Drain pan in 18" and 19 5/8" widths to match all furnace sizes, Piston or TXV models available., Filter-friendly top plate on most models (except 22" & above). Down-turned headers are sized out to easily receive line set, Dedicated upflow/downflow, Sweat connections with available quick-connect stub kit., Leak free product - pressure tested twice (500 psi immersion & 300 psi He), High performance fin design., Factory software for TXV failure testing., Includes die-cut foam sheet for sealing, drain ELL, drain hose & clamp., Protective foam packaging, Dry air holding charge.
Sloped drain pan for lower water retention., Downflow drip shields are molded into drain pan., Drain pan in 18" and 19 5/8" widths to match all furnace sizes, Piston or TXV models available., Filter-friendly top plate on most models (except 22" & above). Down-turned headers are sized out to easily receive line set, Dedicated upflow/downflow, Sweat connections with available quick-connect stub kit., Leak free product - pressure tested twice (500 psi immersion & 300 psi He), High performance fin design., Factory software for TXV failure testing., Includes die-cut foam sheet for sealing, drain ELL, drain hose & clamp., Protective foam packaging, Dry air holding charge.
Embossed upflow cased coil, Right-hand service, with 410A piston., Anti-microbial drain pan with Microban ,
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
195,000 BTU Commercial Unit Heater
Locke Part #: L6243MFG Part #: SEP200AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Patent pending flexible copper tubing for easy motor access, Low 30" height all models, all sizes., Cabinets constructed of heavy-gauge, corrosion-resistant galvanized steel, 5/8" foil-faced insulation for excellent sweat resistance and quiet operation., Refrigerant connections located on top left., (4) Screw removal for easy access to all electrical connections, Dual condensate drain connections on left side, right side, and bottom of cabinet., 1" duct flanges on all models simplify attachment to plenums such as 1 1/2" ductboard, Air filter included with every air handler; no tools required for changeout., Decorative wall panel (26 w x 38 h) or closet panel (24 w x 27 h) available as accessory; both panels reduce published sound level., Wall hanging bracket available as accessory for field installation, Approved for installation in manufactured housing and mobile homes., AC or HP applications; R-22 & R-410A compatible., Light weight aluminum evaporator coil with aluminum header plate; copper coil available., Field or factory installed threaded expansion valve., Corrosion proof plastic drain pan, 5-speed high efficiency ECM motor or PSC motor available., Easy to service electric heat section, 5, 7.5, or 10 kW heat kits standard factory installed on all models., Pull disconnect line voltage connection standard on all models, Patented condensate drain pan safety float switch available as accessory., Includes thermostat connections, time delay (1 sec. on, 45 sec. off), & motor speed settings (PSC motor uses control board; functions are built into the 5-speed ECM motor).
Patent pending flexible copper tubing for easy motor access, Low 30" height all models, all sizes., Cabinets constructed of heavy-gauge, corrosion-resistant galvanized steel, 5/8" foil-faced insulation for excellent sweat resistance and quiet operation., Refrigerant connections located on top left., (4) Screw removal for easy access to all electrical connections, Dual condensate drain connections on left side, right side, and bottom of cabinet., 1" duct flanges on all models simplify attachment to plenums such as 1 1/2" ductboard, Air filter included with every air handler; no tools required for changeout., Decorative wall panel (26 w x 38 h) or closet panel (24 w x 27 h) available as accessory; both panels reduce published sound level., Wall hanging bracket available as accessory for field installation, Approved for installation in manufactured housing and mobile homes., AC or HP applications; R-22 & R-410A compatible., Light weight aluminum evaporator coil with aluminum header plate; copper coil available., Field or factory installed threaded expansion valve., Corrosion proof plastic drain pan, 5-speed high efficiency ECM motor or PSC motor available., Easy to service electric heat section, 5, 7.5, or 10 kW heat kits standard factory installed on all models., Pull disconnect line voltage connection standard on all models, Patented condensate drain pan safety float switch available as accessory., Includes thermostat connections, time delay (1 sec. on, 45 sec. off), & motor speed settings (PSC motor uses control board; functions are built into the 5-speed ECM motor).
Patent pending flexible copper tubing for easy motor access, Low 30" height all models, all sizes., Cabinets constructed of heavy-gauge, corrosion-resistant galvanized steel, 5/8" foil-faced insulation for excellent sweat resistance and quiet operation., Refrigerant connections located on top left., (4) Screw removal for easy access to all electrical connections, Dual condensate drain connections on left side, right side, and bottom of cabinet., 1" duct flanges on all models simplify attachment to plenums such as 1 1/2" ductboard, Air filter included with every air handler; no tools required for changeout., Decorative wall panel (26 w x 38 h) or closet panel (24 w x 27 h) available as accessory; both panels reduce published sound level., Wall hanging bracket available as accessory for field installation, Approved for installation in manufactured housing and mobile homes., AC or HP applications; R-22 & R-410A compatible., Light weight aluminum evaporator coil with aluminum header plate; copper coil available., Field or factory installed threaded expansion valve., Corrosion proof plastic drain pan, 5-speed high efficiency ECM motor or PSC motor available., Easy to service electric heat section, 5, 7.5, or 10 kW heat kits standard factory installed on all models., Pull disconnect line voltage connection standard on all models, Patented condensate drain pan safety float switch available as accessory., Includes thermostat connections, time delay (1 sec. on, 45 sec. off), & motor speed settings (PSC motor uses control board; functions are built into the 5-speed ECM motor).
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
230,000 BTU Commercial Unit Heater
Locke Part #: L6207MFG Part #: SEP230AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban
Armstrong painted multiposition cased coil, Right-hand service, With 410A A/C TXV,
Patent pending flexible copper tubing for easy motor access, Low 30" height all models, all sizes., Cabinets constructed of heavy-gauge, corrosion-resistant galvanized steel, 5/8" foil-faced insulation for excellent sweat resistance and quiet operation., Refrigerant connections located on top left., (4) Screw removal for easy access to all electrical connections, Dual condensate drain connections on left side, right side, and bottom of cabinet., 1" duct flanges on all models simplify attachment to plenums such as 1 1/2" ductboard, Air filter included with every air handler; no tools required for changeout., Decorative wall panel (26 w x 38 h) or closet panel (24 w x 27 h) available as accessory; both panels reduce published sound level., Wall hanging bracket available as accessory for field installation, Approved for installation in manufactured housing and mobile homes., AC or HP applications; R-22 & R-410A compatible., Light weight aluminum evaporator coil with aluminum header plate; copper coil available., Field or factory installed threaded expansion valve., Corrosion proof plastic drain pan, 5-speed high efficiency ECM motor or PSC motor available., Easy to service electric heat section, 5, 7.5, or 10 kW heat kits standard factory installed on all models., Pull disconnect line voltage connection standard on all models, Patented condensate drain pan safety float switch available as accessory., Includes thermostat connections, time delay (1 sec. on, 45 sec. off), & motor speed settings (PSC motor uses control board; functions are built into the 5-speed ECM motor).
30,000 BTU Low Profile Unit Heater
Locke Part #: L6240MFG Part #: FSAN30A-1
Residential low profile units, Self-diagnostic board with LED display improves troubleshooting., Sidewall venting eliminates roof penetrations., Wiring junction box is located inside of unit., 1 clearance from ceiling for easy installation., Heating capacities from 30,000 75,000 BTUH., Up to 81% thermal efficiency, Direct drive propeller fans are dynamically balanced for quiet and smooth operation, Power exhaust system allows horizontal venting to 25 ft., Tubular heat exchangers made of aluminized steel., Aluminized steel in shot burners provide efficient trouble free operation, Great for garages & shops.
300,000 BTU Commercial Unit Heater
Locke Part #: L6208MFG Part #: SEP300AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
345,000 BTU Commercial Unit Heater
Locke Part #: L6209MFG Part #: SEP345AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
400,000 BTU Commercial Unit Heater
Locke Part #: L6249MFG Part #: SEP400AN
Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
45,000 BTU Low Profile Unit Heater
Locke Part #: L6241MFG Part #: FSAN45A-1
Residential low profile units, Self-diagnostic board with LED display improves troubleshooting., Sidewall venting eliminates roof penetrations., Wiring junction box is located inside of unit., 1 clearance from ceiling for easy installation., Heating capacities from 30,000 75,000 BTUH., Up to 81% thermal efficiency, Direct drive propeller fans are dynamically balanced for quiet and smooth operation, Power exhaust system allows horizontal venting to 25 ft., Tubular heat exchangers made of aluminized steel., Aluminized steel in shot burners provide efficient trouble free operation, Great for garages & shops.
75,000 BTU Low Profile Unit Heater
Locke Part #: L6297MFG Part #: FSAN75
Residential low profile units, Self-diagnostic board with LED display improves troubleshooting., Sidewall venting eliminates roof penetrations., Wiring junction box is located inside of unit., 1 clearance from ceiling for easy installation., Heating capacities from 30,000 75,000 BTUH., Up to 81% thermal efficiency, Direct drive propeller fans are dynamically balanced for quiet and smooth operation, Power exhaust system allows horizontal venting to 25 ft., Tubular heat exchangers made of aluminized steel., Aluminized steel in shot burners provide efficient trouble free operation, Great for garages & shops.
Product Image Not Available 76700843 6-7.5 TON TXV R410A F/LA7.51AC4
Locke Part #: L3731MFG Part #: 76700843
Product Image Not Available 767391 FAN BLADE F/CUHN45 SS FROM 27K60
Locke Part #: L6277MFG Part #: 1767391
Product Image Not Available 767773 PRESSUR SWITCH F/-1 SS FROM 33J81
Locke Part #: L6237MFG Part #: 76777300
Product Image Not Available Auxiliary Limit Switch for 230-400
Locke Part #: L6235MFG Part #: 767171
Includes:, motor, housing, & blower wheel
Sensor has a high temperature Kanthol sensor rod that will withstand 1800 F. it has 30 of Teflon insulated lead wire with a 482 F rating and a 1/4" quick connect terminal., Sensor rod is 4" long, can be cut and bent to match original unit.
Ignition Control Board SEP-5
Locke Part #: L6279MFG Part #: 76722700
Control Board for CUH30 - 45 (5), 60 - 75 (2); FSA30 - 75; SEP60 - 90 (5), 100, 115 - 145 (5), 175 (5), 200 (3), 230 (5), 250, 290 (5), 300, 345 (6), 400 (4); FOA45 - 400 Unit Heaters
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
R-410A, R-22, A/C and heat pump compatible., Liquid line refrigerant connections are 3/8 ODF., Suction line refrigerant connections are 7/8 ODF., Dual circuit coils have row split circuiting allowing full coil surface to be active when 1 or 2 circuits are operating., Factory installed TXV valves, Up or down airflow compatible, Patented lanced fin design., Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air, Drain pans are constructed of aluminum to resist corrosion All coils are individually packaged on skids., Heavy gauge embossed galvanized cabinets fully lined with 1/2" insulation, Dual 3/4" FPT condensate drains., Left hand drain and refrigerant connections.
R-410A, R-22, A/C and heat pump compatible., Liquid line refrigerant connections are 3/8 ODF., Suction line refrigerant connections are 7/8 ODF., Dual circuit coils have row split circuiting allowing full coil surface to be active when 1 or 2 circuits are operating., Factory installed TXV valves, Up or down airflow compatible, Patented lanced fin design., Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air, Drain pans are constructed of aluminum to resist corrosion All coils are individually packaged on skids., Heavy gauge embossed galvanized cabinets fully lined with 1/2" insulation, Dual 3/4" FPT condensate drains., Left hand drain and refrigerant connections.
R-410A, R-22, A/C and heat pump compatible., Liquid line refrigerant connections are 3/8 ODF., Suction line refrigerant connections are 7/8 ODF., Dual circuit coils have row split circuiting allowing full coil surface to be active when 1 or 2 circuits are operating., Factory installed TXV valves, Up or down airflow compatible, Patented lanced fin design., Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air, Drain pans are constructed of aluminum to resist corrosion All coils are individually packaged on skids., Heavy gauge embossed galvanized cabinets fully lined with 1/2" insulation, Dual 3/4" FPT condensate drains., Left hand drain and refrigerant connections.
Product Image Not Available Limit Controls for SEP 145
Locke Part #: L6219MFG Part #: 100000535
Product Image Not Available PL36H175P13135 1.5-3TON "B" CAB. PLENUM COIL
Locke Part #: L3935MFG Part #: PL36H175P13135
Product Image Not Available PL60H210P19140 3.5-5 TON "C" CAB. PLENUM COIL
Locke Part #: L3936MFG Part #: PL60H210P19140
Product Image Not Available S Series Circuit Board
Locke Part #: L3729MFG Part #: 76700854
Product Image Not Available S Series Wall Hanging Bracket
Locke Part #: L3727MFG Part #: 65506050