Loading ...

62 MAX Infrared Thermometer
Locke Part #: T1903MFG Part #: FLUKE-62 MAX
3-meter drop., Dust and water-resistant:, IP54 rated for dust and water resistance., Rugged:, 3-meter (9.8-foot) drop tested., Ergonomically designed:, Completely redesigned for a more comfortable hand fit Small in size: Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box., Distance to spot:, Precise laser technology makes for more accurate and repeatable measurements., Dual lasers:, The 62 MAX has dual rotating lasers to help you identify area to be measured. The measurement area is the spot between the dots., Large, backlit display:, Large screen makes data easier to read, even in dark areas., Min/Max/Avg/Dif:, Displays the minimum, maximum or average temperature, or the difference between two measurements., Alarm:, Hi and Lo alarms for rapid display of measurements outside the limits., Power:, The 62 MAX is powered by a single, standard AA battery.
The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source., Dual Sensitivity, LED light with 100,000 hour life, Detects from 90 to 600 V AC, Operating temperature 0 C to 50 C, Ultra-Bright White LED, 100,000 hr. bulb
CO Meter
Locke Part #: T1902MFG Part #: FLUKE-CO-220
Rugged case and electronics., Large LCD displays CO levels from 0 to 1000 ppm., Bright back-light, Beeper triggers with increasing frequency as CO levels rise. (Can be muted), MAX Hold function stores and displays the maximum level., Automatic sensor zeroing and self-test sequence on start-up., Automatic power-off after 20 minutes, Replaceable sensor extends tool life., C50 soft carrying case, battery and instruction sheet. Resolution 1 ppm Accuracy: 5%
Digital Multimeter
Locke Part #: T1474MFG Part #: FLUKE-179 ESFP
80BK Temperature Probe, Installed 9V battery, Test leads, Users manual, True RMS voltage and current measurements, 0.09% basic accuracy, 6000 count resolution, Digital display with analog bargraph and backlight, Manual and automatic ranging, Display Hold and Auto Hold, Frequency and capacitance measure, Resistance, continuity and diode measurements, Temperature measurements, Min-max-average recording, Smoothing mode allows filtering of rapidly changing inputs, Closed case calibration on front panel, Ergonomic case with integrated protective holster, EN61010-1 CAT III 1000V / CAT IV 600V, Measures twice as fast as other multimeters, All inputs are protected to IEN61010-1 CAT IV 600V/CAT III 1000V. UL, CSA, T V listed and VDE Pending
FC Wireless Clamp Module Apple/Android
Locke Part #: T2190MFG Part #: FLK-A3000FC
The Fluke a3000 FC Wireless AC Current Clamp Module is a fully functional true-RMS current clamp meter that wirelessly relays measure-ments to other Fluke Connect enabled master units, listed below:, Fluke 3000 FC DMM, Fluke Ti200/300/400 Infrared Camera, PC via optional pc3000 FC Adapter, Fluke Connect Mobile app, The Fluke a3000 FC Wireless AC Current Clamp Module has all the essentials for convenient test and measurement troubleshooting:, True-RMS AC clamp meter, Measure up to 400 A AC, Use as a standalone meter or as part of the system, Logging function for recording and saving up to 65,000 readings, Inrush function
FC Wireless K-Type Module Apple/Android
Locke Part #: T2191MFG Part #: FLK-T3000FC
A versatile K-type thermocouple thermometer that wirelessly relays measurements to other Fluke Connect enabled test tools., The Fluke t3000 FC Wireless K-Type Temperature Module wirelessly relays measurements to other Fluke Connect enabled master units, listed below:, Fluke 3000 FC DMM, Fluke Ti200/300/400 Infrared Camera, PC via optional pc3000 FC Adapter, Fluke Connect Mobile app, With the Fluke t3000 FC Wireless K-Type Temperature Module you can:, Use as a standalone meter or as part of the system, Logging function for recording and saving up to 65,000 readings
Handy all-in-one kit that includes :, AC220 SureGrip Alligator Clip Set, TP220 SureGrip Test Probe Set, TL222 SureGrip Silicone Test Lead Set (right to right)
Featurtes:, One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs, Recommended for general purpose measurements, CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
HVAC Clamp Meter
Locke Part #: T1471MFG Part #: FLUKE-902 FC
Capture flue gas temperatures, Conduct flame rod testing, Measure start and run motor capacitors, Measure supply side current and voltage as well as load side current and voltage, Measure current and voltage phase balance on 3 phase systems, Troubleshoot compressor electrical motor faults, Designed for HVAC applications with capacitance, DC Current ( A), and temperature measurements, Small body and jaws fit perfectly in your hand and into tight places, Handy Display Hold button keeps measurements on the display, Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch), Large, backlit display (on most models) is easy-to-see, Auto shut-off maximizes battery life so the meter works when you need it, Three year warranty
HVAC Pro Infrared Gun
Locke Part #: T1470MFG Part #: FLUKE-561
The Fluke 561 IR & contact thermometer combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need in one tool., IR thermometer for quick measurements up close, or at a distance, without a ladder, Contact thermometry capability, compatible with all standard mini-connector type K thermocouples, preserves your investment in thermocouples, Fabric hook-and-loop fastener pipe probe for superheat and sub-cooling and other contact and ambient measurements, Single-point laser sighting, Temperature range of -40 C to 550 C (-40 F to 1022 F) covers most industrial and residential applications, Easy emissivity adjustment (Lo, Med, Hi) for measuring pipes and other shiny materials more accurately, Lightweight (just 12 ounces / 340 grams) and portable, Very easy to use, Efficient no need to shut down equipment when making IR measurements, MIN, MAX, and DIF functions help you quickly identify problems, Scan large areas or small objects quickly and efficiently
Pipe Clamp Temp Probe
Locke Part #: T1900MFG Part #: 80PK-8
Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces, Durable ribbon sensor, Range: -29 to149 C
Pocket Voltage Detector
Locke Part #: T1479MFG Part #: FLUKE-1AC-A1-II
Soft Case for DMM
Locke Part #: T1475MFG Part #: C25
Zippered carrying case with padding and inside pocket., One year warranty
T PRO Electrical Tester
Locke Part #: T1469MFG Part #: T PRO
Safer than traditional solenoid testers and fully compliant with NFPA 70E*., The T PRO Electrical Tester offer all the functionality that electricians look for in volt meters and voltage and continuity testers:, Three ways to detect ac/dc voltage: light, sound, and vibration, Offers the added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight, Comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KOhms,, as well as a backlit LCD display for easier viewing, Safer than traditional solenoid testers:, Solid-state tester design, CAT IV 600 V, CAT III 1000 V rated, Complies with NFPA 70E*
Temperature Humidity Meter
Locke Part #: T1472MFG Part #: FLUKE-971
Backlit dual display of humidity and temperature, Measures dew point and wet bulb temperatures, 99 record storage capacity, Ergonomic design with belt clip and protective holster, Quick-response capacitance sensor with twist-open protective cover, Compact and lightweight (6.6 oz), Temperature range from -20 C to 60 C (-4 F to 140 F), Relative humidity from 5 % to 95 %, Min/Max/Avg Data hold, Low battery indicator
Thermocouple Adapter
Locke Part #: T1901MFG Part #: 80AK-A
Adapts Type-K thermocouple mini connector to dual shrouded banana plug inputs, Measurement range and accuracy: probe dependent, Suitable for low voltage applications (below 30 V AC, 60 V DC)
True RMS Clamp Meter
Locke Part #: T1904MFG Part #: FLUKE-324
Measurement capability:, 400 A AC current measurement, 600 V AC and DC voltage measurement, True RMS AC voltage and current for accurate measurements on non-linear signals, Resistance measurement up to 4 k, with continuity detection, Temperature and capacitance measurement, Slim, ergonomic design, Large, easy to read backlight display, CAT IV 300V/CAT III 600 V safety rating, Hold button, Two-year warranty, Soft carrying case
Voltage, Continuity and Current Tester
Locke Part #: T1478MFG Part #: T5-1000
accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.