Loading ...

Loading ...

Search in: Greenlee Textron

P718.jpg 1 Qt. Wire Pulling Lubrican
Locke Part #: P0718MFG Part #: CRM-Q
In a handy squeeze bottle. Easier to fill elbows during conduit assembly. Easier to fill conduit or spread into conductors as they are pulled in. For use on all types of wires and cables and in all types of approved conduit.
Size: 1-11/32" Diameter, Capacity: 2-1/2" (63.400 mm) and wider studs, 20 gauge (0.900 mm) Steel Stud, Material: Aluminum Head, Weight Lbs (kg): 7.5 (3.5) Punch up through 20 gauge (0.9 mm) steel studs in one stroke, Aluminum head provides strength with minimum weight, reducing operator fatigue, Contoured handle design gives better operator leverage and makes it possible to punch in tight places, Self-stripping design eliminates punch hang-ups, Automatically centers holes on standard studs, Conversion kit available to upgrade early models from 24 gauge to 20 gauge maximum capacity
T45.jpg Cable Stripper & Wire Gauge
Locke Part #: T0045MFG Part #: 0252-11
Slits new & old romex; 16-8 wire gauge.
T0130.jpg 1/2" - 1-1/4" Knock Out Set
Locke Part #: T0130MFG Part #: 7235BB
1/2", 3/4",1",1-1/4", sizes with drive screws.
Product Image Not Available 1/2" Punch
Locke Part #: T0131MFG Part #: 721-1/2P
Product Image Not Available 1/2" Die
Locke Part #: T0132MFG Part #: 14722P
Product Image Not Available 3/4" Punch
Locke Part #: T0133MFG Part #: 721-3/4P
Product Image Not Available 3/4" Die
Locke Part #: T0134MFG Part #: 124AVP
Product Image Not Available 1" Punch
Locke Part #: T0135MFG Part #: 721-1P
Product Image Not Available 1" Die
Locke Part #: T0136MFG Part #: 126AVP
Product Image Not Available 1-1/4" Punch
Locke Part #: T0137MFG Part #: 721-1-1/4P
Product Image Not Available 1-1/4" Die
Locke Part #: T0138MFG Part #: 128AVP
Product Image Not Available 1-1/2" Punch
Locke Part #: T0139MFG Part #: 721-1-1/2P
Product Image Not Available 1-1/2" Die
Locke Part #: T0140MFG Part #: 440AVP
Product Image Not Available 2" Punch
Locke Part #: T0141MFG Part #: 721-2P
Product Image Not Available 2" Die
Locke Part #: T0142MFG Part #: 442AVP
T01471.jpg 3/8" x 1-5/8" Knockout
Locke Part #: T0147MFG Part #: 00042P
T01471.jpg 3/4" x 2-15/16" Knockout
Locke Part #: T0148MFG Part #: 304AVBBP
T0443&T4426.jpg 10" Molded Grip
Locke Part #: T0443MFG Part #: 0451-10M
Custom grip allows area for user identification. Slipproof, ergonomic molded grip for increased comfort and reduced user fatigue., Wider grip design provides larger load bearing areas., Precision-machined and through-hardened for consistent performance and longer life., Right-angled teeth for two way grip., Riveted process ensures joint integrity., Exceeds ASME/ANSI specifications., Note, : This is not an insulated tool.
T0625.jpg Ratcheting Wrench
Locke Part #: T0625MFG Part #: 34941
T0655.jpg 1/2" EMT Bender
Locke Part #: T0655MFG Part #: 840A
Cast-in markings for stub-ups, saddle bends, back-to-back bends, and head-up or down bending
T0655.jpg 3/4" EMT or 1/2" Rigid
Locke Part #: T0656MFG Part #: 841A
Cast-in markings for stub-ups, saddle bends, back-to-back bends, and head-up or down bending
Weight: 0.20 lbs, Shank Length: 6’’ (152 mm), Overall Length: 9-3/4’’ (248 mm) Crank-action handle spins screws fast with one hand., Saves time and effort, especially on long-threaded screws in switch plates, light fixtures, etc. 0-9264485182-7
T2486.jpg 65’ Upperhand™
Locke Part #: T2485MFG Part #: FTS438-65BP
Ergonomic Rubber handle keeps wrist straight to reduce strain. Rubberized interior grip fits the palm reducing pressure points. Corrosion resistant plated carbon steel tape. Impact modified housing, takes a 25' drop. 5 Year Warranty
T2486.jpg 125’ Upperhand™
Locke Part #: T2486MFG Part #: FTS438-125BP
Ergonomic Rubber handle keeps wrist straight to reduce strain. Rubberized interior grip fits the palm reducing pressure points. Corrosion resistant plated carbon steel tape. Impact modified housing, takes a 25' drop. 5 Year Warranty
T2486.jpg 250’ Upperhand™
Locke Part #: T2487MFG Part #: FTS438-240BP
Ergonomic Rubber handle keeps wrist straight to reduce strain. Rubberized interior grip fits the palm reducing pressure points. Corrosion resistant plated carbon steel tape. Impact modified housing, takes a 25' drop. 5 Year Warranty
31933.jpg 16" Dipped Grip
Locke Part #: T3193MFG Part #: 0451-16D
Double dipped grips for added comfort and slip resistance. Precision-machined and through-hardened for consistent performance and longer life. Right-angled teeth for gripping in both directions., Note, : This is not an insulated tool.
Custom grip allows area for user identification. Slipproof, ergonomic molded grips for increased comfort and reduced user fatigue., Wider grip design provides larger load bearing area., Effectively cuts hardened wire, ACSR, bolts, screws, and nails., Though-hardened steel for longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty. Note: This is not an insulated tool.
Custom grip allows area for user identification. Flared handles for added comfort and leverage., Wider grip design provides larger load bearing area for user comfort., Forged from chrome vanadium steel for greater durability and strength., Effectively cuts most hardened wire, ACSR, bolts, screws, and nails., Though-hardened steel for longer life. Duel cutting edges, Exceeds ASME/ANSI specifications., Lifetime limited warranty., Note, : This is not an insulated tool.
T4402.jpg Long Nose Pliers 8"
Locke Part #: T4402MFG Part #: 0351-08M
Custom grip allows area for user identification. Flared handles for added comfort and leverage., Wider grip design provides larger load bearing area for user comfort., Forged from chrome vanadium steel for greater durability and strength., Effectively cuts most hardened wire, ACSR, bolts, screws, and nails., Exceeds ASME/ANSI specifications., Lifetime limited warranty., Note:, This is not an insulated tool.
T4409.jpg 20-Pocket Tool Caddy
Locke Part #: T4409MFG Part #: 0158-15
Constructed of two layers of rugged, lightweight Cordura fabric., Large capacity pockets, Padded handle and shoulder strap, Tool snap and electrical tape strap., Steel hammer holder loop., May be worn on a tool belt., Heavy-duty tape measure holder
T4410.jpg 1/4" Insulated Driver
Locke Part #: T4411MFG Part #: 0257-12I
Rated to 1000V AC/DC. Meets the IEC 60900 and ASTM F1505 standards., Heavy duty construction for longer life., Rugged deep well sockets, Precision heads for accurate fastener fit., Ergonomically designed handle for added comfort and torque., Lifetime limited warranty.
T4410.jpg 5/16" Insulated Driver
Locke Part #: T4412MFG Part #: 0257-13I
Rated to 1000V AC/DC. Meets the IEC 60900 and ASTM F1505 standards., Heavy duty construction for longer life., Rugged deep well sockets, Precision heads for accurate fastener fit., Ergonomically designed handle for added comfort and torque., Lifetime limited warranty.
T4410.jpg 11/32" Insulated Driver
Locke Part #: T4413MFG Part #: 0257-14I
Rated to 1000V AC/DC. Meets the IEC 60900 and ASTM F1505 standards., Heavy duty construction for longer life., Rugged deep well sockets, Precision heads for accurate fastener fit., Ergonomically designed handle for added comfort and torque., Lifetime limited warranty.
"Five-degree" ratcheting design for versatility and ease of use in tight spaces. Polished chrome finish for superior corrosion resistance., Precision heads for accurate fastener fit., Hardened for durability and longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty.
T4418.jpg 1/4" Combination Ratcheting Wrench
Locke Part #: T4419MFG Part #: 0354-11
"Five-degree" ratcheting design for versatility and ease of use in tight spaces. Polished chrome finish for superior corrosion resistance., Precision heads for accurate fastener fit., Hardened for durability and longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty.
T4418.jpg 5/16" Combination Ratcheting Wrench
Locke Part #: T4420MFG Part #: 0354-12
"Five-degree" ratcheting design for versatility and ease of use in tight spaces. Polished chrome finish for superior corrosion resistance., Precision heads for accurate fastener fit., Hardened for durability and longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty.
T4418.jpg 3/8" Combination Ratcheting Wrench
Locke Part #: T4421MFG Part #: 0354-13
"Five-degree" ratcheting design for versatility and ease of use in tight spaces. Polished chrome finish for superior corrosion resistance., Precision heads for accurate fastener fit., Hardened for durability and longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty.
T4418.jpg 7/16" Combination Ratcheting Wrench
Locke Part #: T4422MFG Part #: 0354-14
"Five-degree" ratcheting design for versatility and ease of use in tight spaces. Polished chrome finish for superior corrosion resistance., Precision heads for accurate fastener fit., Hardened for durability and longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty.
T4418.jpg 1/2" Combination Ratcheting Wrench
Locke Part #: T4423MFG Part #: 0354-15
"Five-degree" ratcheting design for versatility and ease of use in tight spaces. Polished chrome finish for superior corrosion resistance., Precision heads for accurate fastener fit., Hardened for durability and longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty.
T4418.jpg 9/16" Combination Ratcheting Wrench
Locke Part #: T4424MFG Part #: 0354-16
"Five-degree" ratcheting design for versatility and ease of use in tight spaces. Polished chrome finish for superior corrosion resistance., Precision heads for accurate fastener fit., Hardened for durability and longer life., Exceeds ASME/ANSI specifications., Lifetime limited warranty.
T0443&T4426.jpg 12" Molded Grip
Locke Part #: T4426MFG Part #: 0451-12M
Custom grip allows area for user identification. Slipproof, ergonomic molded grip for increased comfort and reduced user fatigue., Wider grip design provides larger load bearing areas., Precision-machined and through-hardened for consistent performance and longer life., Right-angled teeth for two way grip., Riveted process ensures joint integrity., Exceeds ASME/ANSI specifications., Note, : This is not an insulated tool.
T4427&T4428.jpg Screw-Holding Screwdriver #1 x 5"
Locke Part #: T4427MFG Part #: 0453-17C
Easily holds screw in place when installing in hard-to-reach locations., Precision tip for accurate fastener fit., Heavy-duty construction for longer life., Soft, cushioned grip for extra comfort, Lifetime limited warranty., Note:, This is not an insulated tool.
T4427&T4428.jpg Screw-Holding Screwdriver #2 x 7"
Locke Part #: T4428MFG Part #: 0453-18C
Easily holds screw in place when installing in hard-to-reach locations., Precision tip for accurate fastener fit., Heavy-duty construction for longer life., Soft, cushioned grip for extra comfort, Lifetime limited warranty., Note:, This is not an insulated tool.
T4429.jpg Drill/Tap Set
Locke Part #: T4429MFG Part #: DTAPKIT
Complete hole drilling and tapping in one operation with power drill saves labor and time, Back tapered beyond tap to prevent thread damage from over-drilling, Deburr/countersink also provided on bit beyond back taper, Made from high-speed steel, Designed to tap up to 10-gauge metal, Includes: 6-32NC, 8-32NC, 10-24NC, 10- 32NF, 12-24NC, 1/4-20NC and 1/4" Ball Lock Adapter
Quick Change arbor allows for rapid mounting or removing of hole saws., Faster, easier slug removal., Drill pilot hole without saw: Provides better ergnomics- reduces stress on wrist, arm and hand., Works with recessed light and carbide grit hole saw products as well. Adapters re-useable to minimize costs., Universal- works with any brand hole saw., Kit contains Bi-metal hole saws for 1/2 through 2 conduit., Push collar to lock on saw, pull to release saw
T4432.jpg 68 Piece Electrician’s Drill/Driver Kit
Locke Part #: T4432MFG Part #: DDKIT-1-68
1/4 Quick Change technology., Titanium Nitride coated self-centering high speed drill bits., Hammer drill rated carbide grade tips and hardened shank masonry drill bits., Hardened forged magnetic nut drivers fit most TapCon fasteners., Includes security bits that fit most security fasteners frequently used in public facilities.
T4433.jpg Hanging Cable Dispenser
Locke Part #: T4433MFG Part #: 9522
Hangs virtually anywhere., Rugged aluminum, steel, and nylon construction., Quick set-up and take down., Collapses for easy storage., Storage bag included., Capacity: 250 of NM or MC cable up to 75 lbs., Length collapsed for storage: 24
T4434.jpg 7/8" x 18" Auger Bit
Locke Part #: T4434MFG Part #: 66RT-7/8
Replacement cutting edge and feed screw kit allows two rebuilds for the price of one bit and also comes with a new screw and hex wrench., Patented Tip Design pulls through the wood even after several holes. No pushing to finish the hole., Quick Change Cutting Edge & Feed Screw - No more resharpening., Easy & Fast to Replace in the Field. Get back to work in seconds., More Durable High Quality Carbon Alloy Steel., Made Stonger. Lasts Longer. Tool Steel Cutting Edge., Easy Pull Back Ground Shaft, Maximum Chip Removal Over Center Flute
Replacement cutting edge and feed screw kit allows two rebuilds for the price of one bit and also comes with a new screw and hex wrench., Patented Tip Design pulls through the wood even after several holes. No pushing to finish the hole., Quick Change Cutting Edge & Feed Screw - No more resharpening., Easy & Fast to Replace in the Field. Get back to work in seconds., More Durable High Quality Carbon Alloy Steel., Made Stonger. Lasts Longer. Tool Steel Cutting Edge., Easy Pull Back Ground Shaft, Maximum Chip Removal Over Center Flute
T4434.jpg 1" x 18" Auger Bit
Locke Part #: T4436MFG Part #: 66RT-1
Replacement cutting edge and feed screw kit allows two rebuilds for the price of one bit and also comes with a new screw and hex wrench., Patented Tip Design pulls through the wood even after several holes. No pushing to finish the hole., Quick Change Cutting Edge & Feed Screw - No more resharpening., Easy & Fast to Replace in the Field. Get back to work in seconds., More Durable High Quality Carbon Alloy Steel., Made Stonger. Lasts Longer. Tool Steel Cutting Edge., Easy Pull Back Ground Shaft, Maximum Chip Removal Over Center Flute
Replacement cutting edge and feed screw kit allows two rebuilds for the price of one bit and also comes with a new screw and hex wrench., Patented Tip Design pulls through the wood even after several holes. No pushing to finish the hole., Quick Change Cutting Edge & Feed Screw - No more resharpening., Easy & Fast to Replace in the Field. Get back to work in seconds., More Durable High Quality Carbon Alloy Steel., Made Stonger. Lasts Longer. Tool Steel Cutting Edge., Easy Pull Back Ground Shaft, Maximum Chip Removal Over Center Flute
T4438a.jpg Pocket Multimeter
Locke Part #: T4438MFG Part #: PDMM-20
T4429.jpg 6-32 Drill/Tap Bit
Locke Part #: T4445MFG Part #: DTAP6-32
Complete hole drilling and tapping in one operation with power drill saves labor and time, Back tapered beyond tap to prevent thread damage from over-drilling, Deburr/countersink also provided on bit beyond back taper, Made from high-speed steel, Designed to tap up to 10-gauge metal, Includes: 6-32NC, 8-32NC, 10-24NC, 10- 32NF, 12-24NC, 1/4-20NC and 1/4" Ball Lock Adapter
T4429.jpg 8-32 Drill/Tap Bit
Locke Part #: T4446MFG Part #: DTAP8-32
Complete hole drilling and tapping in one operation with power drill saves labor and time, Back tapered beyond tap to prevent thread damage from over-drilling, Deburr/countersink also provided on bit beyond back taper, Made from high-speed steel, Designed to tap up to 10-gauge metal, Includes: 6-32NC, 8-32NC, 10-24NC, 10- 32NF, 12-24NC, 1/4-20NC and 1/4" Ball Lock Adapter
T4429.jpg 10-24 Drill/Tap Bit
Locke Part #: T4447MFG Part #: DTAP10-24
Complete hole drilling and tapping in one operation with power drill saves labor and time, Back tapered beyond tap to prevent thread damage from over-drilling, Deburr/countersink also provided on bit beyond back taper, Made from high-speed steel, Designed to tap up to 10-gauge metal, Includes: 6-32NC, 8-32NC, 10-24NC, 10- 32NF, 12-24NC, 1/4-20NC and 1/4" Ball Lock Adapter
T4429.jpg 10-32 Drill/Tap Bit
Locke Part #: T4448MFG Part #: DTAP10-32
Complete hole drilling and tapping in one operation with power drill saves labor and time, Back tapered beyond tap to prevent thread damage from over-drilling, Deburr/countersink also provided on bit beyond back taper, Made from high-speed steel, Designed to tap up to 10-gauge metal, Includes: 6-32NC, 8-32NC, 10-24NC, 10- 32NF, 12-24NC, 1/4-20NC and 1/4" Ball Lock Adapter
T4429.jpg 12-24 Drill/Tap Bit
Locke Part #: T4449MFG Part #: DTAP12-24
Complete hole drilling and tapping in one operation with power drill saves labor and time, Back tapered beyond tap to prevent thread damage from over-drilling, Deburr/countersink also provided on bit beyond back taper, Made from high-speed steel, Designed to tap up to 10-gauge metal, Includes: 6-32NC, 8-32NC, 10-24NC, 10- 32NF, 12-24NC, 1/4-20NC and 1/4" Ball Lock Adapter
T4429.jpg 1/4-20 Drill/Tap Bit
Locke Part #: T4450MFG Part #: DTAP1/4-20
Complete hole drilling and tapping in one operation with power drill saves labor and time, Back tapered beyond tap to prevent thread damage from over-drilling, Deburr/countersink also provided on bit beyond back taper, Made from high-speed steel, Designed to tap up to 10-gauge metal, Includes: 6-32NC, 8-32NC, 10-24NC, 10- 32NF, 12-24NC, 1/4-20NC and 1/4" Ball Lock Adapter
T4451.jpg Flexible LED Flashlight
Locke Part #: T4451MFG Part #: FL2AAF
Small 9/32" head will illuminate tight spaces other flashlights cannot., 16" flexible PVC coated cable will bend and hold the desired state., Runs up to 100 hours on two AA batteries (included)., Rugged white LED light source lasts over 50,000 hours., Anodized aluminum housing with pushbutton ON/OFF switch on tail-cap.
T4434.jpg 3/4" x 18" Auger Bit
Locke Part #: T4452MFG Part #: 66PT-3/4
Replacement cutting edge and feed screw kit allows two rebuilds for the price of one bit and also comes with a new screw and hex wrench., Patented Tip Design pulls through the wood even after several holes. No pushing to finish the hole., Quick Change Cutting Edge & Feed Screw - No more resharpening., Easy & Fast to Replace in the Field. Get back to work in seconds., More Durable High Quality Carbon Alloy Steel., Made Stonger. Lasts Longer. Tool Steel Cutting Edge., Easy Pull Back Ground Shaft, Maximum Chip Removal Over Center Flute
Type: Recessed Light, Material: Steel, Hole Diameter: 6-3/8 in Industry's only interchangeable replacement blades, Strong durable back plate, Available in two styles - steel tooth and carbide grit, Made and designed in USA by Greenlee, Use with a power drill to cut large diameter holes for recessed lighting fixtures, Saws use Greenlee arbor 37156, purchased separately, Application, - For Use with A Power Drill to Cut Large Diameter Holes for Recessed Lighting Fixtures, Use For Halo And Capri, Maximum Capacity, - Steel Toothed Blade - Up To 7/8 IN Plywood, Wood, Acoustical Tile and Ceiling Tile, Replacement Part, - 35721 Blade for 35713, Use with Standard Arbor No, . - 37156.
Size: 6-3/8 in Steel Tooth, Material: Steel For 35713 Carbide Grit, Steel Toothed Blade, Acoustical Tile and Ceiling Tile, Maximum Capacity, - Steel Toothed Blade - Up To 7/8 IN Plywood, Wood, Acoustical Tile And Ceiling Tile
Type: Hex Shank, Weight: 0.500 Lb, Material: High Speed Steel Pilot Drill Bit, Minimum Chuck Size: 1/2", Shank Diameter: 7/16"
Durable, stretchresistant tape for easily pulling and installing wire and cables, Factory-lubricated, Easy-to-read footage markings
Durable, stretchresistant tape for easily pulling and installing wire and cables, Factory-lubricated, Easy-to-read footage markings
T4869_1810.jpg 3/4" EMT Box offset
Locke Part #: T4868MFG Part #: 1811
Bends offsets in one easy operation. Insert conduit, depress handle, release and remove conduit., Makes identical offsets every time, Depress handle to create offset that matches the knockout in box., Maximum offset of .56" (9/16).
T4869_1810.jpg 1/2" EMT Box offset
Locke Part #: T4869MFG Part #: 1810
Bends offsets in one easy operation. Insert conduit, depress handle, release and remove conduit., Makes identical offsets every time, Depress handle to create offset that matches the knockout in box., Maximum offset of .56" (9/16).