Loading ...

Loading ...

Search in: Kidde Residential

Model: 0914E, Warranty: 3 year limited warranty, Pricing Category: P017, Weight (Lbs): 0.5, Depth (in): 1.45, Temperature Range: 40˚F to 100˚F (4°C to 38°C), Diameter (in): 4, Humidity Range: 5%-95% relative humidity (RH), Power Source: 9V Battery (included), Audio Alarm: 85dB at 10ft, Sensor: Ionization Battery Operated (9V Battery Included), - Easy installation and provides continuous protection even during power outages., Test Button -, Tests unit s electronic circuitry, horn and battery function., Low Battery Indicator -, Low battery warning chirp alerts user to change battery., Discreet Design -, Four (4) inch diameter., 3 year limited Warranty 25417091458
P12040_small_Prd.jpgi12040 HW Smoke
Locke Part #: P4223MFG Part #: I12040 (1275E)21006378 Compare
Model: i12040, Warranty: 10 year limited warranty, Pricing Category: P017, Weight (Lbs): 0.5, Depth (in): 1.55, Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C), Diameter (in): 5.6, Humidity Range: 5%-95% relative humidity (RH), Power Source: 120VAC (80mA) with 9V Battery Back Up, Audio Alarm: 85dB at 10ft, Sensor: Ionization, Interconnects: Up to 24 Kidde devices, Wiring: Quick-connect plug with 8” pigtails, Led: Red, 4 modes of operation Green, indicates AC power Front battery pull tab allows battery activation without removing alarm from mounting bracket., Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections., Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip., One button design for easy operation and less confusion. Operates Smart Hush and alarm test, Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp., Dust cover protects sensor from contaminates during construction reducing nuisance alarms., Tamper resist locking feature deters alarm theft, Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system., Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms., 10 year limited Warranty 47871403813
Pricing Category: P017, Electrical Rating: 120VAC 60Hz 0.08 AMP, Weight (Lbs): 3, Width (in): 7, Depth (in): 14, Height (in): 7, Power Source: 120VAC (80mA), Pack Quantity: Master Pack (24 units), Case/ Skid: 75, Layers/ Skid: 5 It can be used to activate auxiliary warning devices such as external bells and sirens, hallway or stairway lighting., This relay will only activate when it receives a smoke signal from an interconnect Smoke Alarm. 0-47871-61207-9
Model: RF-SM-DC, Pricing Category: P017, Weight (Lbs): 0.5, Depth (in): 1.25, Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C), Diameter (in): 5.75, Humidity Range: up to 85% relative humidity (RH), Power Source: 3 AA batteries, Pack Quantity: 3 piece PDQ, Audio Alarm: 85dB at 10ft, Sensor: Ionization, Interconnects: Up to 24 devices ( of which 18 can be initiating), Wiring: Quick connect plug with 8” pigtails The Kidde Wireless Battery Powered Smoke Alarm allows for quick and easy installation an interconnected smoke alarm system without messy wiring or labor., Ability to interconnect without wires., Install in minutes, anywhere in the home! Less cost, and less hassle than re-wiring., Can be installed in additional rooms that need extra protection., The battery powered units are linked so that when one alarm is triggered, all alarms will sound., In addition to providing protection to any room of the home, this battery powered alarm also can be placed in a detached workshop or shed and linked into the home s interconnected system. 0-47871-05557-9
21006376_i12060_small_Prd.jpgi12060 HW Smoke
Locke Part #: P4247MFG Part #: I12060 (1276-E) Compare
Model: i12060, Warranty: 10 year limited warranty, Pricing Category: P017, Weight (Lbs): 0.5, Depth (in): 1.75, Temperature Range: 40˚F to 100˚F (4˚C to38˚C), Diameter (in): 5, Humidity Range: 5%-95% relative humidity (RH), Power Source: 120VAC (80mA), 60HZ, 9V battery backup, Audio Alarm: 85dB at 10ft, Sensor: Ionization, Interconnects: Up to 24 Kidde devices, Led: Green, receiving AC power Red, 4 modes of operation Front battery pull tab allows battery activation without removing alarm from mounting bracket., Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections., Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip, Front battery door makes replacing the battery easy for anyone., One button design for easy operation and less confusion. Operates Smart Hush and alarm test., Battery, run down protection will shut down alarm memory when AC power is not present, reducing, low battery chirp., Dust cover protects sensor from contaminates during construction reducing nuisance alarms, Tamper resist locking feature deters alarm theft, Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system., Battery, backup provides protection in case of power failure, Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. 784908001351
1279-9999_ac_wireless_small_Prd.jpgHardwire Wireless Interconnect Smoke Alarm
Locke Part #: P4249MFG Part #: RF-SM-AC Compare
Model: RF-SM-ACDC, Warranty: 10 year limited warranty, Pricing Category: P017, Weight (Lbs): 0.5, Depth (in): 1.25, Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C), Diameter (in): 5.75, Humidity Range: up to 85% relative humidity (RH), Power Source: 120VAC; 9V battery backup, Pack Quantity: 3 piece PDQ, Audio Alarm: 85dB at 10ft, Sensor: Ionization, Interconnects: Up to 24 devices (of which 18 can be initiating), Wiring: None The Kidde Wireless AC Powered Smoke Alarm makes it easy to expand the coverage of a current interconnected system, Ability to interconnect without wires., Install in minutes, anywhere in the home! Less cost, and less hassle than re-wiring., Can be installed in additional rooms that need extra protection., This AC powered alarm bridges a home s current interconnected system to the newly installed alarms, so that when one alarm is triggered, all alarms will sound. 47871055609
900_0114A_small.jpg900-0114 HW Combo
Locke Part #: P4688MFG Part #: 21006377-N 900-0114A Compare
Model: KN-COSM-IBA, Warranty: 10 year limited warranty, Pricing Category: P017, Weight (Lbs): 1, Depth (in): 1.75, Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C), Diameter (in): 5.75, Humidity Range: 5%-95% relative humidity, Power Source: 120VAC, 60Hz 25mA max per alarm, 9V battery backup, Audio Alarm: 85dB at 10ft, Sensor: Ionization, Interconnects: Up to 24 Kidde devices (of which 18 can be initiating), Wiring: Quick connect plug with 8” pigtails Smart Interconnect Interconnects up to 24 Kidde devices (of which 18 can be initiating)., Battery Backup (9V battery included) Provides protection during power outages., Battery Lockout System Minimized risk of mounting unit without installation of battery., Alarm Tamper Resist Helps deter from tampering and theft., Adjustable Mounting Bracket Makes installation fast and easy., Peak Level Memory Announces CO previously detected if alarm had detected a CO level of 100ppm or higher since it was last reset., Smart Hush Feature Silences nuisance alarms for approximately 10 minutes. (Smoke must be present before Smart Hush is activated), Ionization Sensor Technology Ideal for detecting fast flaming and other types of fires., Test Button Functions, Tests the unit for proper operation, Resets the Carbon Monoxide alarm, Peak Level memory, Red LED - When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds., 5 year limited Warranty 47871163779
0263_small.jpg900-0263 Basic Plug-in CO Clam
Locke Part #: P4690MFG Part #: KN-COB-LCB-A Compare
Model: KN-COB-DP2, Warranty: 10 year limited warranty, Pricing Category: P017, Weight (Lbs): 0.5, Width (in): 5, Depth (in): 1.6875, Height (in): 3.875, Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C), Humidity Range: 5%-95% relative humidity (RH), Power Source: 120VAC, 60 Hz 60mA max., 9V battery backup, Audio Alarm: 85dB at 10ft, Sensor: Electrochemical, Interconnects: No, Led: Green, Normal; Red, Alarm Tamper Resist Feature -, Unit goes into constant alarm mode if it has been unplugged or has come loose from the outlet., 9V Battery Backup -, Provides continuous protection even during power outages., Low Battery Hush -, Silences low battery chirp warning for up to twelve hours in order to maintain protection without having to replace the battery at an inconvenient time., Easy Installation -, Mounts to any wall outlet., Battery Pull Tab -, Eliminates battery installation time and keeps battery fresh., Loud 85dB -, Alerts you of deadly CO gas., Quality Design, 5 year limited warranty., Test/Reset Button, Tests the alarm electronics and resets the unit during alarm., Green LED, Indicates alarm is receiving power and operating properly., Red LED, Illuminates when in alarm mode., 5 year limited Warranty 47871257591
900_0102A_900_0216A_small.jpg900-0102 CO/SM Combo
Locke Part #: P4691MFG Part #: 900-0120 KN-COB-IC Compare
Model: KN-COSM-BA, Warranty: 10 year limited warranty, Pricing Category: P017, Weight (Lbs): 1, Depth (in): 1.8, Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C), Diameter (in): 5.75, Humidity Range: 5%-95% relative humidity (RH), Power Source: 120VAC, 60HZ, 9V battery back-up, Audio Alarm: 85dB at 10ft, Sensor: Electrochemical, Interconnects: Up to 24 Kidde devices Battery Pull Tab, Eliminates battery installation time and keeps battery fresh., Adjustable Mounting Bracket, Allows for fast installation and perfect alignment., Quick Connect, Installs quickly with snap-on harness., Sealed Cover, Reduces nuisance alarms. Sealed to protect sensor from contaminants prior to installation., Tamper Resist Locking Feature, To deter battery and alarm theft., Alkaline Battery Backup, for continuous protection in case of power failure., 5 year limited Warranty 784908000000
kidde-SLED177i-strobe-light.jpgHardwire Strobe Light Signaling Device
Locke Part #: P4692MFG Part #: SL177-I Compare
Model: SL177I, Warranty: 10 year limited warranty, Pricing Category: P017, Electrical Rating: 100 - 130 VAC, 60HZ, 80 mA standby, 44 mA inrush, 1.5 A peak, 390 mA when operating, Weight (Lbs): 1, Depth (in): 3, Temperature Range: 40˚F to 100˚F (4˚C to 38˚C), Diameter (in): 5.6, Power Source: 120VAC, 60HZ, Interconnects: Up to 24 Kidde devices of which 18 can be initiating devices, Flash Rate: 1 flash per second, Light Output: 177 Candela Bright Strobe Light - Flashes to warn of a smoke, heat or carbon monoxide hazard., The Kidde SL177i provides a bright visual signal to warn of a smoke, heat or CO hazard., This light benefits the hearing impaired, allowing a visual alert of a danger., This unit also includes a tamper resist pin that helps to deter thief and tampering., Green LED - Indicates AC power is being delivered to unit., 5 year limited Warranty 47871240036
Model: HD135F, Pricing Category: P017, Weight (Lbs): 0.75, Depth (in): 2, Temperature Range: -20˚F to +100˚F (-29˚C and +38˚C), Diameter (in): 5, Humidity Range: 5%-95% relative humidity (RH), Power Source: 120VAC, 60HZ, 9V battery backup, Audio Alarm: 85dB at 10ft, Sensor: Heat, Interconnects: Up to 24 Kidde devices of which 18 can be initiating devices, Led: Green, AC power present, alarm mode; flashing Red indicates originating unit Interconnectable, Interconnects with up to 24 Kidde devices of which 18 can be initiating., Test Button, Tests unit s electronic circuitry, horn and battery function., 9V Battery Back Up, Provides continuous protection even during power outages., Red LED, Flashes every 30-40 seconds to indicate proper operation., Low Battery Indicator, Alerts user in the event of a low or missing battery., Quick Connect Power Harness, Makes installation fast and easy., 5 year limited Warranty 0-25417-84135-0