Loading ...

1" Bearing Bracket
Locke Part #: L2751MFG Part #: 02917601
Ideal For Replacing Obsolete Pillow Blocks And Streamlined Bearings. May Also Be Used In Some Evaporative Cooler Applications.
Self-aligning, factory packed with plastic petroleum assuring proper lubrication during long life of bearing. Self-aligning porous bronze sleeve.
1" Pillow Block Ball Bearing - pair
Locke Part #: L2740MFG Part #: 38256801
Temperature Range: -30 to 200, F. Durable cast-iron construction, pre-lubricated bearings, & re-greasable.
1" Pillow Block Bearing - pair
Locke Part #: L2738MFG Part #: 38208701
1" Thrust Collar Kit
Locke Part #: L2744MFG Part #: 38220701
Sheet metal thrust collar in 3/4", 5/8" & 1" size. All with hollow head (Allen) set screws. Kit consists of 1 pr. packaged with thrust washers.
1" x 25" Shaft
Locke Part #: L2732MFG Part #: 38209501
When a bearing fails, the shaft is inevitably scored. If not replaced it will destroy the new bearings. Premium shafting is ground and polished to a mirror finish. Excess shaft may be cut off.
1/2" FHP Belt 31"
Locke Part #: L2701MFG Part #: G084002310
1/2" FHP Belt 32"
Locke Part #: L2702MFG Part #: G084002320
1/2" FHP Belt 33"
Locke Part #: L2703MFG Part #: G084002330
1/2" FHP Belt 34"
Locke Part #: L2704MFG Part #: G084002340
1/2" FHP Belt 35"
Locke Part #: L2705MFG Part #: G084002350
1/2" FHP Belt 36"
Locke Part #: L2706MFG Part #: G084002360
1/2" FHP Belt 37"
Locke Part #: L2707MFG Part #: G084002370
1/2" FHP Belt 38"
Locke Part #: L2708MFG Part #: G084002380
1/2" FHP Belt 39"
Locke Part #: L2709MFG Part #: G084002390
1/2" FHP Belt 40"
Locke Part #: L2710MFG Part #: G084002400
1/2" FHP Belt 41"
Locke Part #: L2711MFG Part #: G084002410
1/2" FHP Belt 42"
Locke Part #: L2712MFG Part #: G084002420
1/2" FHP Belt 43"
Locke Part #: L2713MFG Part #: G084002430
1/2" FHP Belt 44"
Locke Part #: L2714MFG Part #: G084002440
1/2" FHP Belt 45"
Locke Part #: L2715MFG Part #: G084002450
1/2" FHP Belt 46"
Locke Part #: L2716MFG Part #: G084002460
1/2" FHP Belt 47"
Locke Part #: L2717MFG Part #: G084002470
1/2" FHP Belt 48"
Locke Part #: L2718MFG Part #: G084002480
1/2" FHP Belt 49"
Locke Part #: L2719MFG Part #: G084002490
1/2" FHP Belt 50"
Locke Part #: L2720MFG Part #: G084002500
1/2" STEEL HUB 60-7658-04
Locke Part #: L0331MFG Part #: 60765804
Extra metal in the two mounting surfaces (hex and round) for more secure fit, Hex on one side, round on other (may use either side) one inventory for all props, Zinc plated and coated with gold chromate for double protection, Set screws are heat treated, black oxide, Mounting screws: zinc plated ,heat treated, pan slotted - with locking serrations under the head - with nylock patch for added locking strength (double locking device designed to grip into the threads without backing out), All Steal; 5/8 has Keyway HEX/ROUND HUBS - with screws
1/2" x 3-1/4" Cast Iron Motor Pulley
Locke Part #: L2721MFG Part #: G078101308
11-1/8" Blower Wheel
Locke Part #: L1986MFG Part #: 01332401
11-1/8" Blower Wheel
Locke Part #: L1987MFG Part #: 01331602
12-1/4" Blower Wheel
Locke Part #: L1988MFG Part #: 02694009
12-1/4" Blower Wheel
Locke Part #: L1989MFG Part #: 02694111
2 BLADE FAN 14" 36 DEGREE 6141660001
Locke Part #: L1875MFG Part #: 61416600-01
14"-24" dia.; high strength embossed aluminum blades clearly identify pitch, dia. & rotation, Top quality epoxy painted spiders with high salt spray characteristics, Steel fixed hub 1/2" Bore - exact fan blades supplied to OEMs... no need for interchangeable hub features since all Lau OEMs use 1/2" bore, Applications:, For lower static pressure condensing units, Well-known OEMs such as G.E., Rheem- Rudd, Singer-Climate Control
2 BLADE FAN 18" 33 DEGREE
Locke Part #: L1876MFG Part #: 60652101
14"-24" dia.; high strength embossed aluminum blades clearly identify pitch, dia. & rotation, Top quality epoxy painted spiders with high salt spray characteristics, Steel fixed hub 1/2" Bore - exact fan blades supplied to OEMs... no need for interchangeable hub features since all Lau OEMs use 1/2" bore, Applications:, For lower static pressure condensing units, Well-known OEMs such as G.E., Rheem- Rudd, Singer-Climate Control
3 BLADE FAN 18" 33 DEG CCW 60-5585-01
Locke Part #: L1893MFG Part #: 60556601
3 BLADE FAN 18" 33 DEG CW 60-5565-01
Locke Part #: L1892MFG Part #: 60556501
3 BLADE FAN 20" 23 DEGREE 60-2670-01
Locke Part #: L1880MFG Part #: 60267001
Rounded blade design for maximum free air delivery with minimum noise levels, Pitches available for most common horsepower and motor speeds, High quality aluminum blades with interchangeable hubs from 1/4" through 3/4" bore, Each fan blade clearly identified as to pitch, diameter and rotation
3-1/2" x 1/2" Rainshield
Locke Part #: L2745MFG Part #: 60385303
3/4" Bearing Bracket
Locke Part #: L2750MFG Part #: 02917501
Ideal For Replacing Obsolete Pillow Blocks And Streamlined Bearings. May Also Be Used In Some Evaporative Cooler Applications.
Self-oiling with sintered bronze bushings and drive type oil cups.
3/4" Pillow Block Ball Bearing - pair
Locke Part #: L2739MFG Part #: 38256701
Temperature Range: -30 to 200, F. Durable cast-iron construction, pre-lubricated bearings, & re-greasable.
3/4" Shaft Dia., 1-17/32" O.D.
Locke Part #: L0926MFG Part #: 38245001
Self-aligning, self-oiling with sintered bronze bushings and drive type oil cups.
3/4" x 20" Shaft
Locke Part #: L0925MFG Part #: 38209601
When a bearing fails, the shaft is inevitably scored. If not replaced it will destroy the new bearings. Premium shafting is ground and polished to a mirror finish. Excess shaft may be cut off.
3/8" STEEL HUB
Locke Part #: L0330MFG Part #: 60765803
Extra metal in the two mounting surfaces (hex and round) for more secure fit, Hex on one side, round on other (may use either side) one inventory for all props, Zinc plated and coated with gold chromate for double protection, Set screws are heat treated, black oxide, Mounting screws: zinc plated ,heat treated, pan slotted - with locking serrations under the head - with nylock patch for added locking strength (double locking device designed to grip into the threads without backing out), All Steal; 5/8 has Keyway HEX/ROUND HUBS - with screws
4 BLADE FAN 16" 27 DEGREE CCW
Locke Part #: L1877MFG Part #: 60719601
4 BLADE FAN 16" 27 DEGREE CW 60-7195-01
Locke Part #: L1889MFG Part #: 60719501
4 BLADE FAN 16" 33 DEGREE CCW
Locke Part #: L1890MFG Part #: 60760601
4 BLADE FAN 16" 33 DEGREE CW
Locke Part #: L1878MFG Part #: 60760501
4 BLADE FAN 18" 33DEG CCW
Locke Part #: L1895MFG Part #: 60558601
4 BLADE FAN 18" 33DEG CW 60-5585-01
Locke Part #: L1894MFG Part #: 60558501
4 BLADE FAN 20" 33 DEG CCW 60559201
Locke Part #: L1891MFG Part #: 60559201
4 BLADE FAN 20" 33 DEGREE CW
Locke Part #: L1879MFG Part #: 60559101
4 BLADE FAN 22" 27 DEGREE CW 60-5593-01
Locke Part #: L1896MFG Part #: 60559301
5 BLADE FAN 10" 31 DEGREE
Locke Part #: L1882MFG Part #: 60838101
5/8" STEEL HUB W/KEY WAY
Locke Part #: L0332MFG Part #: 60765805
Extra metal in the two mounting surfaces (hex and round) for more secure fit, Hex on one side, round on other (may use either side) one inventory for all props, Zinc plated and coated with gold chromate for double protection, Set screws are heat treated, black oxide, Mounting screws: zinc plated ,heat treated, pan slotted - with locking serrations under the head - with nylock patch for added locking strength (double locking device designed to grip into the threads without backing out), All Steal; 5/8 has Keyway HEX/ROUND HUBS - with screws
7" x 1/2" Rainshield
Locke Part #: L2746MFG Part #: 60379501
9-15/16" Blower Wheel
Locke Part #: L1984MFG Part #: 01333602
9-15/16" Blower Wheel
Locke Part #: L1985MFG Part #: 01333201
Fan Blade Pitch Gauge
Locke Part #: T0010MFG Part #: 05099801
To determine blade pitch and rotation for replacement propellers, set the base on the spider and the dial plate on the blade.
Heavy neoprene cushioned. Re-oilable porous bronze bushing in a pressed steel ball unit held firmly in a housing of two-piece interlocking steel. Self-aligning, static free and quiet operating. Two 1/, " rubber spacers provided for use if needed.