Constructed of .065 heavy extruded aluminum. Housing is low profile at 3/4 in high by 1-1/2in wide
Thermoplastic extruded insulator with two #12 solid copper buses on each side
Contains two (2) 20A (2400 watts) rated 120V circuits
Each 1920 watts based on National Electrical Code loading capacity
Each circuit has a dedicated neutral for control isolation
The system can be wired to one circuit with two wires, two circuits with three wires, or two circuits with four wires
ArchiTrak is listed for dry locations only; it is not suitable for damp or wet locations
Can be field cut at 90° in any length without modification to bussing (Do not cut rail less than 8-in length)
Toggle bolts are provided with each Trak rail (2’ and 4’ = two toggle bolts, 6’ and 8’ = three toggle bolts,12’ = four toggle bolts) for gypsum or plaster mount applications
Supplied with one end cap
All ArchiTrak rails, and components can be vertically mounted, except the wand components
Compliance & Restrictionsarrow_drop_down
PROP65: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov