-
Product Featuresarrow_drop_down
- Oblique angle housing design holds trim flush with the ceiling
- Adjustable socket plate permits lamp to remain perpendicular to floor through entire pitch range
- Medium base porcelain socket with nickel plated copper screw shell, thermally protected against improper use of lamp
- Secures in place with factory supplied remodel clips
- Designed for use in non-insulated areas
- Housing is vertically adjustable to accommodate up to a 1 in ceiling thickness
- A19/MR16/BR30/R30/PAR30/PAR30L/PAR38 lamps
- Housing is secured in place with factory supplied remodel clips
- Shadow-free, knife edge trim design blends smoothly into the ceiling
- Angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics
- Maximum (4) 12 AWG 90 deg C branch circuit conductors
- Telescoping height for use in 2 x 8 or 2 x 10 in construction
- The non-IC remodel housing for use in 2/12 to 6/12 pitch slopes, 9 to 27 deg, is ideal for applications where the backside of the ceiling is not accessible
- The housing is designed to be installed in non-insulated areas or where insulation is spaced at least 3 in from the housing
-
Specificationsarrow_drop_down
- Application: Recessed Commercial, Recessed Residential, Damp and Wet Locations
- Ceiling Opening: 6-1/2 x 6-7/8 in
- Country of Origin: UKN
- Diameter: 6 in
- Housing Material: Galvanized Steel
- Insulation Type: Non-IC
- Lamp Type: Incandescent
- Lamp Wattage: 150 W
- Mfg Standards/Approvals: UL, cUL Listed, CSA Certified
- Mounting Type: Ceiling
- Number of Lamps: 1
- Package Height: 24.5 CM
- Package Length: 45.9 CM
- Package Weight: 2.913 L
- Package Width: 35.2 CM
- Suitable For Use With: Ceiling Downlighting
- Type: Sloped Standard
- Voltage Rating: 120 VAC
- Width: 6-7/8 in
-
Resourcesarrow_drop_down
-
Tagsarrow_drop_down
