Aluminum Finned Copper Coils Rifled tubing and enhanced louvered fin for maximum heat transfer and energy efficiency.
Quiet Twin Blowers: Designed to accept full ducted system or for non-ducted free blow installations.
High Efficiency Rotary Compressor R-410A Refrigerant:
Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements.
Liquid Line Filter Drier: Standard on all units. Protects system against moisture.
Galvanized 20 Gauge Zinc Coated Steel Cabinet: Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03.
Electrical Components: Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Circuit Breaker: Standard on 230/208 Models.
One Inch, Disposable Air Filter: Easily removed for replacement from the outside.
Top Rain Flashing: Standard feature on all models.
Slope Top: Standard feature for water run-off.
Compressor Control Module: Standard on all units. Built-in off- delay timer adjustable from 30 seconds to 5-minutes. 2-minute on-delay if power interrupt. 120-second bypass for low pressure control, and both soft and manual lockouts for high and low pressure controls.
Alarm output for alarm relay.
High & Low Pressure Switches are Auto-Reset: Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor.
Barometric Fresh Air Damper: Allows up to 100 CFM of fresh air.
Full Length Mounting Flanges: Built into cabinet for improved appearance and easy installation.