L4390.jpg

Loading ...

10 Ton 460V 3PH Gas/Electric Packaged Units

Details

For pricing information and availability please contact your local branch.

  • Standard Features
  • Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested.
  • R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor.
  • Scroll Compressors - Single speed scroll compressors are furnished on all models.
  • Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow.
  • Independent Outdoor Fan Motor Mounts - Allows for easy and efficient service access without removing the top panel, Constant Air Volume (CAV) or VSFO (Variable Speed Fan Option)) Supply Air Blower Option - Allows constant or multi-staged air delivery, Downflow or Horizontal Airflow - Easy field conversion,Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle, Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved serviceability.
  • Thermostatic Expansion Valves Provide peak cooling performance across the entire application range.
  • MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits.
  • Heating System
  • Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff.
  • Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F.
  • Solid-state electronic spark igniter provides positive direct ignition of burners on each operating cycle. The system permits main gas valve to stay open only when the burners are proven to be lit. Should a loss of flame occur, the gas valve closes, shutting off the gas to the burners. Ignition module has LED to indicate status and aid in troubleshooting.
  • Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls.
  • Ignition control is factory installed in the controls section.
  • Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating.
  • Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation.
  • Cooling System
  • Designed to maximize sensible and latent cooling performance at design conditions.
  • System can operate from 30 F to 125 F without any additional controls.
  • R-410A Refrigerant is Non-chlorine based, ozone friendly.
  • Scroll compressors on all models for high performance, reliability and quiet operation.
  • Resiliently mounted on rubber grommets for quiet operation.
  • Thermal Expansion Valves Assures optimal performance throughout the application range.
  • High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation.
  • Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge.
  • Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp
  • Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15
  • Line voltage data - 60 hz: 460V 3PH
  • Outdoor Coil Fins per inch: 20
  • Outdoor Coil Net Face Area Sq. Ft.: 28
  • Outdoor Coil Number of Rows: 2
  • Outdoor Coil Tube Diameter in.: 3/8
  • Outdoor Fans Diameter in.- No. of Blades: (2) 24
  • Outdoor Fans Motor Horsepower: (2) 1/3hp
  • Outdoor Fans Motor rpm: 1075
  • Outdoor Fans Total Air Volume - CFM: 7800
  • Outdoor Fans Total Motor watts: 670
  • Tonnage: 10