-
Product Featuresarrow_drop_down
- Versatility designed into each kit accommodates a wide-range of cable size
- All materials provided to insulate and waterproof one splice, compound has low viscosity for fast, complete filling of splice and low exotherm which will not damage plastic insulated cable
- 3M Scotchcast electrical insulating resin 2104 in a convenient closed mixing pouch permits clean
- Wraparound polyester film mold contains porous webbing which assures proper insulation spacing around splice and connector
- No special tools required, electrically insulates odd sized and odd shaped splices on cables
- Electrically insulates odd sized and odd shaped splices on cables
- Pliable plastic molds are formed around splices
- Rated for 1 kV cables
- 4-3/4 in spacer web, 0.85 sealing putty
- Accommodates 2/0 AWG stranded h or C-tap compression conductors
- 2-3/4 in maximum conductor size (height plus width)
- 1-1/2 in maximum sheath opening length
- 444 psi tensile strength
- 98% elongation
- 524 V/mil dielectric strength
- 2/0 AWG, 1 AWG conductor size
- 3/4 in OD run/tap cable
-
Specificationsarrow_drop_down
- Cable Diameter: 44989 in
- Cable Type: Non-Shielded
- Color: Green
- Conductor Size: 1 AWG, 2/0 AWG
- Connector Type: Split Bolt H Tap or C Compression
- Insulation Size: 3/4 in OD
- Material: Resin
- Series: 85 Series
- Splice Length: 7 in
- Temperature Rating: 90 to 130 deg C
- Type: 4-Way Multi-Mold Resin
- Voltage Rating: 1 kV
-
Resourcesarrow_drop_down
-
Tagsarrow_drop_down
