Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode
High or low (dip switch) PIR adjustment and minimum to maximum (trimpot), OFF ultrasonic adjustment
1000 W tungsten, ballast, E-ballast, LED, 1/4 hp load limit for relay 1 at 120 VAC, 1200 W ballast, E-ballast, LED, 1/4 hp load limit for relay 1 at 277 VAC, 800 W tungsten, ballast, E-ballast, LED, 1/6 hp load limit for relay 2 at 120 VAC, 1200 W ballast, E-ballast, LED, 1/6 hp load limit for relay 2 at 277 VAC
Complies with 2011 NEC requirements
Zero crossing for long relay life
Vandal-resistant lens combines precise coverage with durability
Selectable walk through mode turns lights off 3 minutes after the room is initially occupied if no motion is detected after the first 30 s
Test mode allows quick and easy adjustments
Selectable audible alert for impending shutoff
In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
Four occupancy logic options give users the ability to customize control to meet application needs
Optional light level sensing with simple setup
Service mode allows sensor to operate as a service switch in the unlikely event of a failure
Sensor coverage tested to NEMA guide publication WD 7-2000
2-relays for control of two separate lighting loads or circuits
E-ballast load type
Optional neutral
Turns lights on and off based on occupancy
Replaces existing wall switches and fits behind a standard decorator wallplate