-
Product Featuresarrow_drop_down
- Time delay adjustment from 30 sec up to 30 min
- Minimum to maximum sensitivity adjustment
- 0 to 1000 VA tungsten, ballast, E-ballast, LED driver, 1/4 hp motor load requirement for each relay at 120 VAC, 0 to 1200 VA ballast, E-ballast and LED, 1/4 hp motor load requirement for each relay at 277 VAC
- Complies with 2011 NEC requirements
- Zero crossing circuitry reduces stress on the relay and results in increased sensor life
- Adjustable time delay and sensitivity
- Custom 2-tier fresnel lens enhances detection at the desktop level
- Sensor coverage tested to NEMA guide publication WD 7 to 2000
- Light level sensor holds lights off when ambient lighting is above the preset level
- Patented voltage drop protection
- For safety, there is no leakage to load in the Off mode and sensor is safety grounded
- LED indicates occupancy detection
- Ballast E-ballast load type
- Turns lighting or fan loads on and off based on occupancy and ambient light level
- The sensor replaces existing wall switches and fits behind a standard decorator wallplate
- Optional neutral
-
Specificationsarrow_drop_down
- Color: White
- Connection Type: Flying Lead
- Control Output: Automatic On/Off, Manual On/Off
- Coverage: 900 sq-ft
- Dimensions: 2.68 in L x 1.75 in W x 1.04 in H
- Lamp Type: LED/Tungsten
- Material: Plastic
- Mounting Type: Strap
- Power Rating: 0 to 1200 W, 1/6 hp
- Sensor Type: Passive Infrared
- Series: WS Series
- Temperature Rating: 35 deg C
- Time Delay: 30 s to 30 min
- Viewing Angle: 180 deg
- Voltage Rating: 120/277 VAC
-
Resourcesarrow_drop_down
-
Tagsarrow_drop_down
