Lutron

Caseta Wireless In-Wall Dimmer,120 V, 50/60 Hz, White

Locke# P2677 | | Mfg# PD-6WCL-WH
P2677

Lutron

Caseta Wireless In-Wall Dimmer,120 V, 50/60 Hz, White

Locke# P2677 | Mfg# PD-6WCL-WH

For pricing and availability please Sign In

*Item only available: AR, KS, MO, OK, TX, VA

  • Product Featuresarrow_drop_down
    • The Caseta Wireless in-wall dimmer provides dimming of multiple load types and allows remote control and occupancy / vacancy sensing when paired with wireless transmitting devices.
    • Lutron patented Clear Connect RF Technology works through walls and floors.
    • Includes Front Accessible Service Switch (FASST) for safe lamp replacement.
    • Two-wire dimmer ideal for retrofit applications. No neutral required.
    • Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.
    • Works with dimmable LEDs and CFLs as well as incandescent and halogen light bulbs.
    • Key Design Features:
    • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
    • Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
    • Dimmers always operate locally and do not require system control.
    • Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
    • Uses Lutron Claro wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately.
    • Lutron Claro wallplates snap on with no visible means of attachment.
    • Requires a 1-gang U.S. wallbox. 31/2 in (89 mm) deep recommended, 21/4 in (57 mm) deep minimum.
    • Green LEDs indicate load status. System Communications and Capacity
    • The Caseta Wireless in-wall dimmer communicates with the Pico remote controls and Radio Powr Savr sensors through radio frequency (RF).
    • The Caseta Wireless in-wall dimmer must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of Pico remote controls and Radio Powr Savr sensors.
    • Up to ten transmitting devices may be associated to each in-wall dimmer.
    • Approvals:
    • cULus Listed
    • NOM certified
    • FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
    • Industry Canada certified
    • COFETEL certifie
    • Specifications:
    • Load Type
    • Load
    • Led
    • up to 150 W
    • Halogen
    • up to 600 W
    • CFL
    • up to 150 W
    • Incandescent
    • up to 600 W
arrow_upward
Feedback