Loading ...

Loading ...

Search in: Conduit Bodies Category

Material: Gray Iron, Style: Zinc Plated with Epoxy Powder Coat, Trade Size: 1", Volume (cuin): C Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating, Cover material & finish-Stamped steel/zinc plating, BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
P3282.jpg1" Capped Elbow - Y Type
Locke Part #: P3283MFG Part #: ELBY100 Compare
Material: Gray Iron, Style: LB, Trade Size: 1", Volume (cuin): 10.6 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating, Cover material & finish-Stamped steel/Zinc plating, BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Zinc Plated with Epoxy Powder Coat, Volume: BlueKote, Volume (cuin): 16.9 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating. Cover material & finish-Stamped steel/Zinc plating, neoprene gasket., BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires., Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers., Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
Material: Zinc Plated, Volume: 1", Volume (cuin): 0.935-1.035 All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw., Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixture outlets when used with appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit.
Material: Ductile Iron, Volume: 15.9 cu. in, Volume (cuin): 2-5/16 x 3-1/2 x 1" All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw., Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixture outlets when used with appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit.
Material: Ductile Iron, Style: Zinc Plated, Trade Size: 1", Volume (cuin): 0.935 All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw, Class I, Div. 1&2, Groups C, D Explosion proof, Class II, Div. 1, Groups E, F, G - Dust-Ignition proof, Class III, Div. 1&2 Rain tight, NEMA 3, 4, 7 CD, 9 EFG - Wet Locations, Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixutre outlets when used with, appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and, splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit
Material: Gray Iron, Style: Zinc Plated with Epoxy Powder Coat, Trade Size: 1/2", Volume (cuin): C Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating, Cover material & finish-Stamped steel/zinc plating, BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
P3282.jpg1/2" Capped Elbow - Y Type
Locke Part #: Q0134MFG Part #: ELBY50 Compare
Material: Gray Iron, Style: LB, Trade Size: 1/2", Volume (cuin): 4.0 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating, Cover material & finish-Stamped steel/Zinc plating, BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Gray Iron, Style: TB, Trade Size: 1/2", Volume (cuin): 6.0 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating., Cover material & finish-Stamped steel/Zinc plating., BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Ductile Iron, Style: Zinc Plated, Trade Size: 1/2", Volume (cuin): 0.570" All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw, Class I, Div. 1&2, Groups C, D Explosion proof, Class II, Div. 1, Groups E, F, G - Dust-Ignition proof, Class III, Div. 1&2 Rain tight, NEMA 3, 4, 7 CD, 9 EFG - Wet Locations, Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixutre outlets when used with, appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and, splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit
Material: Ductile Iron, Volume: 13.5 cu. in, Volume (cuin): 2" x 3-1/2" x 7/8" All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw., Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixture outlets when used with appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit.
P3252.jpg1/2" Outlet Bodies
Locke Part #: P3252MFG Part #: GRT50 Compare
Sizes 1/2", 3/4", Extension body available (See GRCEX-0), Copper free aluminum, Blank cover included, Compact Size, Supplied w/ 5 hubs & 3 close-up plugs, Cast conduit hubs with integral bushings
P3237.jpg1/2" Outlet Bodies - C Series
Locke Part #: P3237MFG Part #: ERC50 Compare
Trade Size: 1/2" Outlet Bodies - C Series
P3267.jpg1 Lb. Packing Fiber
Locke Part #: P3268MFG Part #: F1 Compare
Package Size: 1 Lb. Packing Fiber
1901.jpg1 LB. SEAL FLX COMPOUND
Locke Part #: P4783MFG Part #: DS-1 Compare
Remains pliable, can be painted immediately.Provides convenience of selecting the right size for the job. Will not dry out, crack and fall out of installation. Will not irritate skin, or corrode metals, or have harmful effects on plastics.
P3265.jpg1lb. Sealing Compound
Locke Part #: P3266MFG Part #: EXSC-16 Compare
Material: Gray Iron, Style: TB, Trade Size: 2", Volume (cuin): 27.5 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating., Cover material & finish-Stamped steel/Zinc plating., BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Zinc Plated, Volume: 2", Volume (cuin): 1.880-2.047 All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw, Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixture outlets when used with appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit.
Material: Ductile Iron, Volume: 77.8 cu. in, Volume (cuin): 4-1/16" x 5-3/4" x 1-1/16" All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw., Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixture outlets when used with appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit.
Material: Zinc Plated, Volume: 2", Volume (cuin): 1.880-2.047 All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw, Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixture outlets when used with appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit.
P3267.jpg2 oz. Packing Fiber
Locke Part #: P3267MFG Part #: F02 Compare
Package Size: 2 oz. Packing Fiber
Material: Gray Iron, Style: LB, Trade Size: 3", Volume (cuin): 132 Body material-Gray Iron with Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating, For use with Rigid/IMC Conduit, BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Gray Iron, Style: X, Trade Size: 3/4", Volume (cuin): 9.1 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating., Cover material & finish-Stamped steel/Zinc plating., BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Gray Iron, Style: Zinc Plated with Epoxy Powder Coat, Trade Size: 3/4", Volume (cuin): C Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating, Cover material & finish-Stamped steel/zinc plating, BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
P3282.jpg3/4" Capped Elbow - Y Type
Locke Part #: P3282MFG Part #: ELBY75 Compare
P3250.jpg3/4" Conduit Bodies - X Series
Locke Part #: P3250MFG Part #: EXT-2 Compare
Trade Size: 3/4" Conduit Bodies - X Series Copper Free Aluminum, Integral Bushings, Sizes 1/2", 3/4"
Material: Gray Iron, Style: LR, Trade Size: 3/4", Volume (cuin): 6.6 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating., Cover material & finish-Stamped steel/Zinc plating., BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Gray Iron, Style: TB, Trade Size: 3/4", Volume (cuin): 9.1 Body material-Gray Iron/Zinc plating and baked-on Epoxy Powder Coat with BlueKote internal coating., Cover material & finish-Stamped steel/Zinc plating., BlueKote Teflon based internal finish provides a slick, easy-glide internal surface which significantly lowers the amount of force necessary to pull wires, Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain, Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks, Bodies are designed with a flat back, allowing more cubic inch capacity, T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers, Application:, Conduit bodies are installed in conduit systems to connect sections, act as pull outlets when conductors are being installed and provide easy access for splices in branch conductors, Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes
Material: Ductile Iron, Style: Zinc Plated, Trade Size: 3/4", Volume (cuin): 0.755" All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw, Class I, Div. 1&2, Groups C, D Explosion proof, Class II, Div. 1, Groups E, F, G - Dust-Ignition proof, Class III, Div. 1&2 Rain tight, NEMA 3, 4, 7 CD, 9 EFG - Wet Locations, Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixutre outlets when used with, appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and, splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit
Material: Ductile Iron, Style: Zinc Plated, Trade Size: 3/4", Volume (cuin): 0.755 All hubs have a minimum of five full threads and integral bushing, All boxes are furnished with internal grounding screw, Class I, Div. 1&2, Groups C, D Explosion proof, Class II, Div. 1, Groups E, F, G - Dust-Ignition proof, Class III, Div. 1&2 Rain tight, NEMA 3, 4, 7 CD, 9 EFG - Wet Locations, Application:, GUA boxes can be used for hazardous location conduit runs for the following:, (1) Allows for mounting of fixutre outlets when used with, appropriate covers;, (2) Provides easy access to wiring;, (3) Provides junction in conduit for wire pulling and, splices;, (4) Changes direction in rigid conduit systems;, (5) Attaches two or more pieces of conduit long runs;, (6) Guards against damage to wires in rigid conduit
P3252.jpg3/4" Outlet Bodies
Locke Part #: P3253MFG Part #: GRT75 Compare
Sizes 1/2", 3/4", Extension body available (See GRCEX-0), Copper free aluminum, Blank cover included, Compact Size, Supplied w/ 5 hubs & 3 close-up plugs, Cast conduit hubs with integral bushings
P3237.jpg3/4" Outlet Bodies - LB Series
Locke Part #: P3244MFG Part #: APPLB27 Compare
Trade Size: 3/4" Outlet Bodies - LB Series
P799.jpg3/4 oz. Anti-oxidant
Locke Part #: P0835MFG Part #: DE-OX-1OZ Compare
A non-petroleum grease for use on aluminium and copper wire, with all types of pressure, tap, split-bolt and service connectors. Temperature range is 0 F to 460 F. 8 oz.
P3267.jpg4 oz. Packing Fiber
Locke Part #: P3277MFG Part #: FO4 Compare
Package Size: 4 oz. Packing Fiber
P3265.jpg4oz. Sealing Compound
Locke Part #: P3265MFG Part #: EXSC-2 Compare
1901.jpg5 LB. SEAL FLX COMPOUND
Locke Part #: P4784MFG Part #: DS-5 Compare
Remains pliable, can be painted immediately.Provides convenience of selecting the right size for the job. Will not dry out, crack and fall out of installation. Will not irritate skin, or corrode metals, or have harmful effects on plastics.
P799.jpg8 oz. Anti-oxidant
Locke Part #: P0799MFG Part #: DE-OX-8OZ Compare
A non-petroleum grease for use on aluminium and copper wire, with all types of pressure, tap, split-bolt and service connectors. Temperature range is 0 F to 460 F. 8 oz.
pvc-dwv-fittings-main.jpgDOUBLE FIXTURE FITTING
Locke Part #: Q0323MFG Part #: 5249 Compare
Material: Zinc Plating with Clear Chromate Coating, Volume: 2-1/2" - 3" T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and cover, For use with Form 7 conduit body