Loading ...

Loading ...

Search in: Cody Co Duct Work Category

L120-L132Cody.jpg10" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7027MFG Part #: 1252610 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 10, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg10" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7015MFG Part #: 1252810 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 10, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg10" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0127MFG Part #: 12510 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 10, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody320.jpg10" Inline Adjustable Damper
Locke Part #: L7037MFG Part #: 32010 Compare
Material: Galvanized Metal, Diameter (in): 10 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Cody698.jpg10" Round Ceiling Diffuser Box with Damper
Locke Part #: L0064MFG Part #: 69810 Compare
Size (in): 10
Size: 10" x 10" - 8", Gauge: 28 GA, Insulation Type: R8
Cody825.jpg10" x 10" x 10" Furnace Tee
Locke Part #: L1207MFG Part #: 825101010 Compare
Material: Galvanized Metal, Size (in): 10x10x10 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
L213-L240Cody.jpg10" x 10" x 10" Wye
Locke Part #: L0236MFG Part #: 800101010 Compare
Material: Galvanized Metal, Size (in): 10 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg10" x 10" x 6" Wye
Locke Part #: L0233MFG Part #: 80010106 Compare
Material: Galvanized Metal, Size (in): 10 x 10 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody645.jpg10" x 10" x 7" Insulated Register Boot
Locke Part #: L0177MFG Part #: 64510107 Compare
Size (in): 10 x 10 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Metal, Gauge: 30, Size (in): 10 x 10 x 7 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 10 x 7 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
279Cody.jpg10" x 10" x 7" Register Boot with 24” Plate
Locke Part #: L1184MFG Part #: 27910107 Compare
Material: Galvanized Metal, Size (in): 10 x 10 x 7 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Cody645.jpg10" x 10" x 7"Insulated Register Boot R8 Lined, 28 Gauge
Locke Part #: L7411MFG Part #: 645R82810107 Compare
Gauge: 28, Size (in): 10 x 10 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody602R6_R8.jpg10" x 10" x 8" Air Tite Register Boot, R6 Insulator
Locke Part #: L7082MFG Part #: 602R610108 Compare
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
Cody648.jpg10" x 10" x 8" Hi Side Insulated Boot
Locke Part #: L7048MFG Part #: 64810108 Compare
Size (in): 10 x 10 x 8
Cody641.jpg10" x 10" x 8" Insulated Box with 4 Corner Tabs
Locke Part #: L1159MFG Part #: 64110108 Compare
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 10 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody645.jpg10" x 10" x 8" Insulated Register Boot
Locke Part #: L0159MFG Part #: 64510108 Compare
Size (in): 10 x 10 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Metal, Gauge: 30, Size (in): 10 x 10 x 8 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 10 x 8 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
279Cody.jpg10" x 10" x 8" Register Boot with 24” Plate
Locke Part #: L1185MFG Part #: 27910108 Compare
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Material: Galvanized Steel, Size (in): 10 x 10 x 8 30 GA Galvanized Steel, 1 Flange for Rails
L213-L240Cody.jpg10" x 10" x 8" Wye
Locke Part #: L0235MFG Part #: 80010108 Compare
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody645.jpg10" x 10" x 8"Insulated Register Boot R8 Lined, 28 Gauge
Locke Part #: L7407MFG Part #: 645R82810108 Compare
Gauge: 28, Size (in): 10 x 10 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Size (in): 10 x 12 Increase type with flange & damper
Cody251.jpg10" x 4" x 4" Concrete Box
Locke Part #: L0259MFG Part #: 2514104 Compare
Size (in): 10 x 4 x 4
Cody236.jpg10" x 4" x 5" 90° Register Boot with 6" Extension
Locke Part #: L0168MFG Part #: 23641056 Compare
Size (in): 10 x 4 x 5
279Cody.jpg10" x 4" x 5" Register Boot with 24” Plate
Locke Part #: L1188MFG Part #: 2794105 Compare
Material: Galvanized Metal, Size (in): 10 x 4 x 5 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
L50-L1222Cody.jpg10" x 4" x 5" Register Box with Rails & Flange
Locke Part #: L0050MFG Part #: 6244105 Compare
Size (in): 10 x 4 x 5
Cody214.jpg10" x 4" x 5" Universal Uninsulated Register Boot
Locke Part #: L0143MFG Part #: 2144105 Compare
Material: Galvanized Metal, Size (in): 10 x 4 x 5, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Size (in): 10 x 4 x 6
Cody251.jpg10" x 4" x 6" Concrete Box
Locke Part #: L0265MFG Part #: 2514106 Compare
Size (in): 10 x 4 x 6
Cody224.jpg10" x 4" x 6" End Register Boot without Flange
Locke Part #: L0058MFG Part #: 2244106 Compare
Material: Galvanized Metal, Size (in): 10 x 4 x 6 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
279Cody.jpg10" x 4" x 6" Register Boot with 24” Plate
Locke Part #: L1179MFG Part #: 2794106 Compare
Material: Galvanized Metal, Size (in): 10 x 4 x 6 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
L50-L1222Cody.jpg10" x 4" x 6" Register Box with Rails & Flange
Locke Part #: L1175MFG Part #: 6244106 Compare
Size (in): 10 x 4 x 6
Cody214.jpg10" x 4" x 6" Universal Uninsulated Register Boot
Locke Part #: L0144MFG Part #: 2144106 Compare
Material: Galvanized Metal, Size (in): 10 x 4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody104.jpg10" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7006MFG Part #: 1042610 Compare
Gauge: 26, Size (in): 10, Length (ft): 4
L106-L118Cody.jpg10" x 5’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0117MFG Part #: 1052810 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L106-L118Cody.jpg10" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0106MFG Part #: 10510 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody400.jpg10" x 6" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0299MFG Part #: 400610 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 6 Constructed of Galvanized Metal, Collars are Hemmed
Cody602R6_R8.jpg10" x 6" x 6" Air Tite Register Boot, R6 Insulator
Locke Part #: L7081MFG Part #: 602R61066 Compare
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
Cody602R6_R8.jpg10" x 6" x 6" Air Tite Register Boot, R8 Insulator
Locke Part #: L7072MFG Part #: 602R81066 Compare
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
Cody641.jpg10" x 6" x 6" Insulated Box with 4 Corner Tabs
Locke Part #: L1161MFG Part #: 6416106 Compare
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 6 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody640.jpg10" x 6" x 6" Insulated Box without flange
Locke Part #: L0161MFG Part #: 6406106 Compare
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
L50-L1222Cody.jpg10" x 6" x 6" Register Box with Rails & Flange
Locke Part #: L0053MFG Part #: 6246106 Compare
Size (in): 10 x 6 x 6
L213-L240Cody.jpg10" x 6" x 6" Wye
Locke Part #: L0240MFG Part #: 8001066 Compare
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L50-L1222Cody.jpg10" x 6" x 7" Register Box with Rails & Flange
Locke Part #: L1222MFG Part #: 6246107 Compare
Size (in): 10 x 6 x 7
Cody400.jpg10" x 8" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0297MFG Part #: 400810 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 8 Constructed of Galvanized Metal, Collars are Hemmed
Cody801.jpg10" x 8" x 6" Sealed Wye
Locke Part #: L7092MFG Part #: 8011086 Compare
Material: Galvanized Metal, Size (in): 10 x 8 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg10" x 8" x 6" Wye
Locke Part #: L0238MFG Part #: 8001086 Compare
Material: Galvanized Metal, Size (in): 10 x 8 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody602R6_R8.jpg10" x 8" x 7" Air Tite Register Boot, R6 Insulator
Locke Part #: L7077MFG Part #: 602R61087 Compare
Material: Galvanized Metal, Size (in): 10 x 8 x 7 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
L213-L240Cody.jpg10" x 8" x 7" Wye
Locke Part #: L0232MFG Part #: 8001087 Compare
Material: Galvanized Metal, Size (in): 10 x 8 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody602R6_R8.jpg10" x 8" x 8" Air Tite Register Boot, R6 Insulator
Locke Part #: L7078MFG Part #: 602R61088 Compare
Material: Galvanized Metal, Size (in): 10 x 8 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
L50-L1222Cody.jpg10" x 8" x 8" Register Box with Rails & Flange
Locke Part #: L0188MFG Part #: 6241088 Compare
Size (in): 10 x 8 x 8
Cody801.jpg10" x 8" x 8" Sealed Wye
Locke Part #: L7090MFG Part #: 8011088 Compare
Material: Galvanized Metal, Size (in): 10 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg10" x 8" x 8" Wye
Locke Part #: L0237MFG Part #: 8001088 Compare
Material: Galvanized Metal, Size (in): 10 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody400.jpg10" x 9" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0296MFG Part #: 400910 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 9 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg10" x 9" x 5" Wye
Locke Part #: L0234MFG Part #: 8001095 Compare
Material: Galvanized Metal, Size (in): 10 x 9 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg10" x 9" x 6" Wye
Locke Part #: L0241MFG Part #: 8001096 Compare
Material: Galvanized Metal, Size (in): 10 x 9 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg10" x 9" x 7" Wye
Locke Part #: L0239MFG Part #: 8001097 Compare
Material: Galvanized Metal, Size (in): 10 x 9 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody035.jpg10’ "S" Cleat for Rectangular Duct
Locke Part #: L0073MFG Part #: 03010 Compare
Length (ft): 10
Cody035.jpg10’ Drive Cleat for Rectangular Duct
Locke Part #: L0074MFG Part #: 0352610 Compare
Length (ft): 10
L50-L1222Cody.jpg10 x 10" x 7" Register Box with Rails & Flange
Locke Part #: L0191MFG Part #: 62410107 Compare
Size (in): 10 X10 x 7
L50-L1222Cody.jpg10 x 10" x 8" Register Box with Rails & Flange
Locke Part #: L0189MFG Part #: 62410108 Compare
Size (in): 10 X10 x 8
L120-L132Cody.jpg12" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7028MFG Part #: 1252612 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 12, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg12" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0128MFG Part #: 12512 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 12, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody320.jpg12" Inline Adjustable Damper
Locke Part #: L7038MFG Part #: 32012 Compare
Material: Galvanized Metal, Diameter (in): 12 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Cody400.jpg12" x 10" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0300MFG Part #: 4001012 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 12 x 10 Constructed of Galvanized Metal, Collars are Hemmed
Cody801.jpg12" x 10" x 10" Sealed Wye
Locke Part #: L7091MFG Part #: 801121010 Compare
Material: Galvanized Metal, Size (in): 12 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg12" x 10" x 10" Wye
Locke Part #: L0244MFG Part #: 800121010 Compare
Material: Galvanized Metal, Size (in): 12 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg12" x 10" x 6" Wye
Locke Part #: L0247MFG Part #: 80012106 Compare
Material: Galvanized Metal, Size (in): 12 x 10 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody801.jpg12" x 10" x 8" Sealed Wye
Locke Part #: L7094MFG Part #: 80112108 Compare
Material: Galvanized Metal, Size (in): 12 x 10 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg12" x 10" x 8" Wye
Locke Part #: L0246MFG Part #: 80012108 Compare
Material: Galvanized Metal, Size (in): 12 x 10 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Size: 12" x 12" - 10", Gauge: 28 GA, Insulation Type: R8
Cody645.jpg12" x 12" x 10" Insulated Register Boot
Locke Part #: L0182MFG Part #: 645121210 Compare
Size (in): 12 x 12 x 10 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
279Cody.jpg12" x 12" x 10" Register Boot with 24” Plate
Locke Part #: L1186MFG Part #: 279121210 Compare
Material: Galvanized Metal, Size (in): 12 x 12 x 10 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Cody645.jpg12" x 12" x 10"Insulated Register Boot R8 Lined, 28 Gauge
Locke Part #: L7412MFG Part #: 645R828121210 Compare
Gauge: 28, Size (in): 12 x 12 x 10 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody825.jpg12" x 12" x 12" Furnace Tee
Locke Part #: L1208MFG Part #: 825121212 Compare
Material: Galvanized Metal, Size (in): 12x12x12 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
L213-L240Cody.jpg12" x 12" x 12" Wye
Locke Part #: L0243MFG Part #: 800121212 Compare
Material: Galvanized Metal, Size (in): 12 x 12 x 12 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg12" x 12" x 6" Wye
Locke Part #: L0242MFG Part #: 80012126 Compare
Material: Galvanized Metal, Size (in): 12 x 12 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody602R6_R8.jpg12" x 12" x 8" Air Tite Register Boot, R6 Insulator
Locke Part #: L7083MFG Part #: 602R612128 Compare
Material: Galvanized Metal, Size (in): 12 x 12 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
L213-L240Cody.jpg12" x 12" x 8" Wye
Locke Part #: L0248MFG Part #: 80012128 Compare
Material: Galvanized Metal, Size (in): 12 x 12 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Size (in): 12 X 2-1/4 X 6
Material: Galvanized Metal, Size (in): 12 x 2-1/4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
L106-L118Cody.jpg12" x 3’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L1198MFG Part #: 10312 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Size (in): 12 x 4 x 6
Cody251.jpg12" x 4" x 6" Concrete Box
Locke Part #: L0266MFG Part #: 2514126 Compare
Size (in): 12 x 4 x 6
Cody224.jpg12" x 4" x 6" End Register Boot without Flange
Locke Part #: L0059MFG Part #: 2244126 Compare
Material: Galvanized Metal, Size (in): 12 x 4 x 6 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
279Cody.jpg12" x 4" x 6" Register Boot with 24” Plate
Locke Part #: L1187MFG Part #: 2794126 Compare
Material: Galvanized Metal, Size (in): 12 x 4 x 6 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
L50-L1222Cody.jpg12" x 4" x 6" Register Box with Rails & Flange
Locke Part #: L1176MFG Part #: 6244126 Compare
Size (in): 12 x 4 x 6
Cody214.jpg12" x 4" x 6" Universal Uninsulated Register Boot
Locke Part #: L0145MFG Part #: 2144126 Compare
Material: Galvanized Metal, Size (in): 12 x 4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Size (in): 12 x 4 x 7
Cody224.jpg12" x 4" x 7" End Register Boot without Flange
Locke Part #: L0057MFG Part #: 2244127 Compare
Material: Galvanized Metal, Size (in): 12 x 4 x 7 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
279Cody.jpg12" x 4" x 7" Register Boot with 24” Plate
Locke Part #: L1171MFG Part #: 2794127 Compare
Material: Galvanized Metal, Size (in): 12 x 4 x 7 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
L50-L1222Cody.jpg12" x 4" x 7" Register Box with Rails & Flange
Locke Part #: L1174MFG Part #: 6244127 Compare
Size (in): 12 x 4 x 7
Cody214.jpg12" x 4" x 7" Universal Uninsulated Register Boot
Locke Part #: L0147MFG Part #: 2144127 Compare
Material: Galvanized Metal, Size (in): 12 x 4 x 7, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody251.jpg12" x 4" x 8" Concrete Box
Locke Part #: L0267MFG Part #: 2514146 Compare
Size (in): 12 x 4 x 8
Cody214.jpg12" x 4" x 8" Universal Uninsulated Register Boot
Locke Part #: L0149MFG Part #: 2144128 Compare
Material: Galvanized Metal, Size (in): 12 x 4 x 8, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody104.jpg12" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7007MFG Part #: 1042612 Compare
Gauge: 26, Size (in): 12, Length (ft): 4
L106-L118Cody.jpg12" x 5’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0109MFG Part #: 1052812 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L106-L118Cody.jpg12" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0107MFG Part #: 10512 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L50-L1222Cody.jpg12" x 6" x 6" Register Box with Rails & Flange
Locke Part #: L1178MFG Part #: 6246126 Compare
Size (in): 12 x 6 x 6
Cody214.jpg12" x 6" x 6" Universal Uninsulated Register Boot
Locke Part #: L0069MFG Part #: 2146126 Compare
Material: Galvanized Metal, Size (in): 12 x 6 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody641.jpg12" x 6" x 7" Insulated Box with 4 Corner Tabs
Locke Part #: L1162MFG Part #: 6416127 Compare
Material: Galvanized Metal, Size (in): 12 x 6 x 7 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 12 x 6 x 7 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody640.jpg12" x 6" x 7" Insulated Box without flange
Locke Part #: L0162MFG Part #: 6406127 Compare
Material: Galvanized Metal, Size (in): 12 x 6 x 7 Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
L50-L1222Cody.jpg12" x 6" x 7" Register Box with Rails & Flange
Locke Part #: L0052MFG Part #: 6246127 Compare
Size (in): 12 x 6 x 7
Cody214.jpg12" x 6" x 8" Universal Uninsulated Register Boot
Locke Part #: L0070MFG Part #: 2146128 Compare
Material: Galvanized Metal, Size (in): 12 x 6 x 8, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Size: 12" x 8" - 8", Gauge: 28 GA, Insulation Type: R8
Cody602R6_R8.jpg12" x 8" x 8" Air Tite Register Boot, R6 Insulator
Locke Part #: L7084MFG Part #: 602R61288 Compare
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
Cody602R6_R8.jpg12" x 8" x 8" Air Tite Register Boot, R8 Insulator
Locke Part #: L7073MFG Part #: 602R81288 Compare
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
Cody645.jpg12" x 8" x 8" Insulated Register Boot
Locke Part #: L0195MFG Part #: 6458128 Compare
Size (in): 12 x 8 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody801.jpg12" x 8" x 8" Sealed Wye
Locke Part #: L7093MFG Part #: 8011288 Compare
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg12" x 8" x 8" Wye
Locke Part #: L0245MFG Part #: 8001288 Compare
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody645.jpg12" x 8" x 8"Insulated Register Boot R8 Lined, 28 Gauge
Locke Part #: L7414MFG Part #: 645R8288128 Compare
Gauge: 28, Size (in): 12 x 8 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
L213-L240Cody.jpg12" x 9" x 9" Wye
Locke Part #: L0263MFG Part #: 8001299 Compare
Material: Galvanized Metal, Size (in): 12 x 9 x 9 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L50-L1222Cody.jpg12 x 12 x 10" Register Box with Rails & Flange
Locke Part #: L0190MFG Part #: 624121210 Compare
Size (in): 12 X12 X10
Product Image Not Available12-1/4" x 24-1/4" Insulated Return Air Box, 26 Gauge
Locke Part #: L6179MFG Part #: 08912224212 Compare
Gauge: 26, Size (in): 12-1/4 x 24-1/4
Material: 28 GA Galvanized Metal, Size (in): 12.25 x 24.25 Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Material: 26 GA Galvanized Metal, Size (in): 12.25 x 24.25 Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Gauge: 28, 26-STD, 24, Size (in): 13.5 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 13.5 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 13.5 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 13.5 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
L120-L132Cody.jpg14" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7029MFG Part #: 1252414 Compare
Material: Galvanized Metal, Gauge: 24, Size (in): 14, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg14" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0129MFG Part #: 12514 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 14, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Product Image Not Available14" W x 30" L x 12" D Insulated Return Air Box
Locke Part #: L0020MFG Part #: 089143012 Compare
L213-L240Cody.jpg14" x 10" x 10" Wye
Locke Part #: L0208MFG Part #: 800141010 Compare
Material: Galvanized Metal, Size (in): 14 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody400.jpg14" x 12" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0302MFG Part #: 4001214 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 14 x 12 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg14" x 12" x 10" Wye
Locke Part #: L0253MFG Part #: 800141210 Compare
Material: Galvanized Metal, Size (in): 14 x 12 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg14" x 12" x 12" Wye
Locke Part #: L0252MFG Part #: 800141212 Compare
Material: Galvanized Metal, Size (in): 14 x 12 x 12 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg14" x 12" x 8" Wye
Locke Part #: L0254MFG Part #: 80014128 Compare
Material: Galvanized Metal, Size (in): 14 x 12 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody641.jpg14" x 14" x 12" Insulated Box with 4 Corner Tabs
Locke Part #: L1168MFG Part #: 641141412 Compare
Material: Galvanized Metal, Size (in): 14 x 14 x 12 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 14 x 14 x 12 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody645.jpg14" x 14" x 12" Insulated Register Boot
Locke Part #: L0175MFG Part #: 645141412 Compare
Size (in): 14 x 14 x 12 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
L213-L240Cody.jpg14" x 14" x 12" Wye
Locke Part #: L0251MFG Part #: 800141412 Compare
Material: Galvanized Metal, Size (in): 14 x 14 x 12 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody645.jpg14" x 14" x 12"Insulated Register Boot R8 Lined, 28 Gauge
Locke Part #: L7409MFG Part #: 645R828141412 Compare
Gauge: 28, Size (in): 14 x 14 x 12 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody825.jpg14" x 14" x 14" Furnace Tee
Locke Part #: L1209MFG Part #: 825141414 Compare
Material: Galvanized Metal, Size (in): 14x14x14 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Material: Galvanized Metal, Size (in): 14 x 2-1/4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Size (in): 14 X 2-1/4 X 6
L106-L118Cody.jpg14" x 3’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0110MFG Part #: 10314 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Size (in): 14 x 4 x 6
Cody251.jpg14" x 4" x 6" Concrete Box
Locke Part #: L0270MFG Part #: 2514128 Compare
Size (in): 14 x 4 x 6
Cody224.jpg14" x 4" x 6" End Register Boot without Flange
Locke Part #: L0060MFG Part #: 2244146 Compare
Material: Galvanized Metal, Size (in): 14 x 4 x 6 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails
Cody214.jpg14" x 4" x 6" Universal Uninsulated Register Boot
Locke Part #: L0146MFG Part #: 2144146 Compare
Material: Galvanized Metal, Size (in): 14 x 4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody214.jpg14" x 4" x 7" Universal Uninsulated Register Boot
Locke Part #: L0148MFG Part #: 2144147 Compare
Material: Galvanized Metal, Size (in): 14 x 4 x 7, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Size (in): 14 x 4 x 8
Cody251.jpg14" x 4" x 8" Concrete Box
Locke Part #: L0271MFG Part #: 2514148 Compare
Size (in): 14 x 4 x 8
279Cody.jpg14" x 4" x 8" Register Boot with 24” Plate
Locke Part #: L1189MFG Part #: 2794148 Compare
Material: Galvanized Metal, Size (in): 14 x 4 x 8 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
L50-L1222Cody.jpg14" x 4" x 8" Register Box with Rails & Flange
Locke Part #: L1177MFG Part #: 6244148 Compare
Size (in): 14 x 4 x 8
Cody214.jpg14" x 4" x 8" Universal Uninsulated Register Boot
Locke Part #: L0150MFG Part #: 2144148 Compare
Material: Galvanized Metal, Size (in): 14 x 4 x 8, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody104.jpg14" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7008MFG Part #: 1042614 Compare
Gauge: 26, Size (in): 14, Length (ft): 4
L106-L118Cody.jpg14" x 5’ Snap Lock Furnace Pipe, 26 Gauge
Locke Part #: L0108MFG Part #: 10514 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody641.jpg14" x 6" x 8" Insulated Box with 4 Corner Tabs
Locke Part #: L1163MFG Part #: 6416148 Compare
Material: Galvanized Metal, Size (in): 14 x 6 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 14 x 6 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody640.jpg14" x 6" x 8" Insulated Box without flange
Locke Part #: L0163MFG Part #: 6406148 Compare
Material: Galvanized Metal, Size (in): 14 x 6 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
L50-L1222Cody.jpg14" x 6" x 8" Register Box with Rails & Flange
Locke Part #: L0051MFG Part #: 6246148 Compare
Size (in): 14 x 6 x 8
Material: Galvanized Steel, Size (in): 14 x 8 x 9 30 GA Galvanized Steel, 1 Flange for Rails
Product Image Not Available14 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6150MFG Part #: L6150 Compare
Product Image Not Available14-1/4"W x 24-1/4"L x 12"D Insulated Return Air Box
Locke Part #: L0029MFG Part #: 08914224212 Compare
Material: 28 GA Galvanized Metal, Size (in): 14.25 x 24.25 Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Material: 26 GA Galvanized Metal, Size (in): 14.25 x 24.25 Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Material: 28 GA Galvanized Metal, Size (in): 14.25 x 30.25 Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Material: 26 GA Galvanized Metal, Size (in): 14.25 x 30.25 Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Gauge: 28, 26-STD, 24, Size (in): 15.75 x 16.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 15.75 x 16.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 15.75 x 22 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 15.75 x 22 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
L120-L132Cody.jpg16" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7030MFG Part #: 1252416 Compare
Material: Galvanized Metal, Gauge: 24, Size (in): 16, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg16" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L0130MFG Part #: 12516 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 16, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody400.jpg16" x 14" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0301MFG Part #: 4001416 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 16 x 14 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg16" x 14" x 12" Wye
Locke Part #: L0264MFG Part #: 800161412 Compare
Material: Galvanized Metal, Size (in): 16 x 14 x 12 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg16" x 14" x 14" Wye
Locke Part #: L0256MFG Part #: 800161414 Compare
Material: Galvanized Metal, Size (in): 16 x 14 x 14 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Size (in): 16 x 18 x 36 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 16 x 18 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 16 x 20 x 36 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
L106-L118Cody.jpg16" x 3’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0111MFG Part #: 10316 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody104.jpg16" x 4’ Furnace Pipe, 24 Gauge
Locke Part #: L7009MFG Part #: 1042416 Compare
Gauge: 24, Size (in): 16, Length (ft): 4
Gauge: 28, 26-STD, 24, Size (in): 16.5 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 16.5 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 16.5 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 16.5 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 16.75 x 17.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 16.75 x 17.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 16.75 x 19.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 16.75 x 22.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 17.25 x 19.5 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
L120-L132Cody.jpg18" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7031MFG Part #: 1252418 Compare
Material: Galvanized Metal, Gauge: 24, Size (in): 18, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg18" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0131MFG Part #: 12518 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 18, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L213-L240Cody.jpg18" x 14" x 14" Wye
Locke Part #: L0255MFG Part #: 800181414 Compare
Material: Galvanized Metal, Size (in): 18 x 14 x 14 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody400.jpg18" x 16" Sheet Metal Reducer No Crimp, 26 Gauge
Locke Part #: L0303MFG Part #: 4001618 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 18 x 16 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg18" x 18" x 16" Wye
Locke Part #: L0249MFG Part #: 800181816 Compare
Material: Galvanized Metal, Size (in): 18 x 18 x 16 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L106-L118Cody.jpg18" x 3’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0112MFG Part #: 10318 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody104.jpg18" x 4’ Furnace Pipe, 24 Gauge
Locke Part #: L7010MFG Part #: 1042418 Compare
Gauge: 24, Size (in): 18, Length (ft): 4
Gauge: 28, 26-STD, 24, Size (in): 18.5 x 15.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 19.25 x 16.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 19.5 x 17.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 19.5 x 21.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 19.5 x 21.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 19.75 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 19.75 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 19.75 x 23.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Material: Galvanized Metal, Size (in): 2-1/4 x 10 x 5, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Material: Galvanized Metal, Size (in): 2-1/4 x 10 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Material: Galvanized Metal, Size (in): 2-1/4 x 12 x 5, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Material: Galvanized Metal, Size (in): 2-1/4 x 14 x 7, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
L120-L132Cody.jpg20" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L0132MFG Part #: 12520 Compare
Material: Galvanized Metal, Gauge: 24, Size (in): 20, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody071.jpg20" Long, 28 Gauge "W" Brace
Locke Part #: L0031MFG Part #: 071320 Compare
Length (in): 20, Gauge: 28
Cody400.jpg20" x 18" Sheet Metal Reducer No Crimp, 26 Gauge
Locke Part #: L0284MFG Part #: 4001820 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 20 x 18 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg20" x 20" x 18" Wye
Locke Part #: L0250MFG Part #: 800202018 Compare
Material: Galvanized Metal, Size (in): 20 x 20 x 18 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Gauge: 28, 26-STD, 24, Size (in): 20 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 20 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Cody051.jpg20" x 25" Side Return Air Filter Rex Rack
Locke Part #: L7018MFG Part #: 0512025 Compare
Material: Galvanized Metal, Size (in): 20 x 25 26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal
L106-L118Cody.jpg20" x 3’ Snap Lock Furnace Pipe, 26 Gauge
Locke Part #: L0113MFG Part #: 10320 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody104.jpg20" x 4’ Furnace Pipe, 24 Gauge
Locke Part #: L7011MFG Part #: 1042420 Compare
Gauge: 24, Size (in): 20, Length (ft): 4
Product Image Not Available20 X 10 ROUGH-IN RET AIR FRAME
Locke Part #: L6153MFG Part #: L6153 Compare
1 Flange on All Four Sides for Easy Attachment, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Available Lined or Unlined- Must Specify the R Value of Liner, Standard Height 30 Unless Otherwise Specified
Size (in): 20.25 x 23.5 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Material: 26 GA Galvanized Metal, Size (in): 20.25 x 30.25 Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength
Size (in): 20.5 x 20.75 x 36 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Size (in): 22 x 22 x 36 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 22.75 x 16.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Product Image Not Available225 10X6X6 END BOOT W/FLANGE
Locke Part #: L7482MFG Part #: 2256106 Compare
Product Image Not Available225 12X6X7 END BOOT W/FLANGE
Locke Part #: L7483MFG Part #: 2256127 Compare
Product Image Not Available225 14X6X8 END BOOT W/ FLANGE
Locke Part #: L7484MFG Part #: 2256148 Compare
Product Image Not Available225 14X8X9 END BOOT W/FLANGE
Locke Part #: L7485MFG Part #: 2258149 Compare
Product Image Not Available225 8X4X5 END BOOT W/FLANGE
Locke Part #: L7481MFG Part #: 225485 Compare
Gauge: 28, 26-STD, 24, Size (in): 23.25 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Gauge: 28, 26-STD, 24, Size (in): 23.5 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped
Product Image Not Available235 10X6X6 90DEG BOOT W/FLANGE
Locke Part #: L7487MFG Part #: 2356106 Compare
Product Image Not Available235 12X6X7 90DEG BOOT W/F;ANGE
Locke Part #: L7488MFG Part #: 325 12X6X7 Compare
Product Image Not Available235 14X6X8 90DEG BOOT W/FLANGE
Locke Part #: L7489MFG Part #: 235 14X6X8 Compare
Product Image Not Available235 14X8X9 90DEG BOOT S/FLANGE
Locke Part #: L7490MFG Part #: 235 14X8X9 Compare
Product Image Not Available235 8X4X5 90 DEG BOO W/FLANGE
Locke Part #: L7486MFG Part #: 235 8X4X5 Compare
Product Image Not Available237 4X10X6 ANGLE BOOT W/BRACE
Locke Part #: L0140MFG Part #: 2374106 Compare
Product Image Not Available237 4X12X7 ANGLE BOOT W/BRACE
Locke Part #: L0141MFG Part #: 2374127 Compare
Product Image Not Available24 X 12 ROUGH-IN RET AIR FRAME
Locke Part #: L6152MFG Part #: L6152 Compare
Cody051.jpg25" x 20" Side Return Air Filter Rex Rack
Locke Part #: L7019MFG Part #: 0512520 Compare
Material: Galvanized Metal, Size (in): 25 x 20 26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal
Product Image Not Available25 X 16 ROUGH-IN RET AIR FRAME
Locke Part #: L6154MFG Part #: L6154 Compare
Size (in): 26, Packing: 300/Carton Can be used on Register Boxes, Boots and Insulated boxes., Snaps to all fours sides so box can be Installed to run in either direction
L120-L132Cody.jpg3" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0120MFG Part #: 1253 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 3, Throat Dimension: 2.5" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody110.jpg3" x 10’ RD Conductor Pipe, 28 Gauge
Locke Part #: L0463MFG Part #: 1103 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 3, Length (ft): 10 Plain round galvanized pipe, Constructed of 30 GA or 28 GA Galvanized Metal
Cody825.jpg3" x 3" x 3" Furnace Tee
Locke Part #: L1200MFG Part #: 825333 Compare
Material: Galvanized Metal, Size (in): 3 x 3 x 3 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
L106-L118Cody.jpg3" x 3’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L1190MFG Part #: 1033 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Product Image Not Available30 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6151MFG Part #: L6151 Compare
L120-L132Cody.jpg4" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7021MFG Part #: 125264 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 4, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg4" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7012MFG Part #: 125284 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 4, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg4" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0121MFG Part #: 1254 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 4, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody950.jpg4" Single Wall Cap
Locke Part #: L0015MFG Part #: 9504 Compare
Material: Galvanized Steel - Formed, Size (in): 4 Galvanized Steel Formed Material, Options Available: Screen
Cody930.jpg4" Single Wall Roof Cap
Locke Part #: L0023MFG Part #: 9304 Compare
Size (in): 4
Material: Galvanized Steel, Size (in): 4 x 10 x 6 30 GA Galvanized Steel, 1 Flange for Rails
Cody214.jpg4" x 10" x 7" Universal Uninsulated Register Boot
Locke Part #: L1215MFG Part #: 2144107 Compare
Material: Galvanized Metal, Size (in): 4 x 10 x 7, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody110.jpg4" x 10’ RD Conductor Pipe, 28 Gauge
Locke Part #: L0464MFG Part #: 1104 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 4, Length (ft): 10 Plain round galvanized pipe, Constructed of 30 GA or 28 GA Galvanized Metal
Material: Galvanized Steel, Size (in): 4 x 12 x 7 30 GA Galvanized Steel, 1 Flange for Rails
Material: Galvanized Steel, Size (in): 4 x 14 x 8 30 GA Galvanized Steel, 1 Flange for Rails
Cody400.jpg4" x 3" Sheet Metal Reducer No Crimp, 30 Gauge
Locke Part #: L0285MFG Part #: 40034 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 4 x 3 Constructed of Galvanized Metal, Collars are Hemmed
L106-L118Cody.jpg4" x 3’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L1191MFG Part #: 1034 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody825.jpg4" x 4" x 4" Furnace Tee
Locke Part #: L1201MFG Part #: 825444 Compare
Material: Galvanized Metal, Size (in): 4 x 4 x 4 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
L106-L118Cody.jpg4" x 5’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0118MFG Part #: 105284 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L106-L118Cody.jpg4" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0100MFG Part #: 1054 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody645.jpg4" x 8" x 5" Insulated Register Boot
Locke Part #: L0154MFG Part #: 645485 Compare
Size (in): 4 x 8 x 5 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Steel, Size (in): 4 x 8 x 5 30 GA Galvanized Steel, 1 Flange for Rails
Gauge: 28, Size (in): 4 x 8 x 5 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody071.jpg48" Long, 28 Gauge "W" Brace
Locke Part #: L0026MFG Part #: 071348 Compare
Length (in): 48, Gauge: 28
L120-L132Cody.jpg5" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0122MFG Part #: 1255 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 5, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody950.jpg5" Single Wall Cap
Locke Part #: L0016MFG Part #: 9505 Compare
Material: Galvanized Steel - Formed, Size (in): 5 Galvanized Steel Formed Material, Options Available: Screen
Cody930.jpg5" Single Wall Roof Cap
Locke Part #: L0024MFG Part #: 9305 Compare
Size (in): 5
Cody400.jpg5" x 4" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0286MFG Part #: 40045 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 5 x 4 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg5" x 4" x 4" Wye
Locke Part #: L0205MFG Part #: 800544 Compare
Material: Galvanized Metal, Size (in): 5 x 4 x 4 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody825.jpg5" x 5" x 5" Furnace Tee
Locke Part #: L1202MFG Part #: 825555 Compare
Material: Galvanized Metal, Size (in): 5 x 5 x 5 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
L106-L118Cody.jpg5" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0101MFG Part #: 1055 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L120-L132Cody.jpg6" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7023MFG Part #: 125266 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 6, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg6" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0123MFG Part #: 1256 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 6, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody320.jpg6" Inline Adjustable Damper
Locke Part #: L7033MFG Part #: 3206 Compare
Material: Galvanized Metal, Diameter (in): 6 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Cody698.jpg6" Round Ceiling Diffuser Box with Damper
Locke Part #: L0062MFG Part #: 6986 Compare
Size (in): 6
Cody950.jpg6" Single Wall Cap
Locke Part #: L0017MFG Part #: 9506 Compare
Material: Galvanized Steel - Formed, Size (in): 6 Galvanized Steel Formed Material, Options Available: Screen
Cody930.jpg6" Single Wall Roof Cap
Locke Part #: L0025MFG Part #: 9306 Compare
Size (in): 6
Size: 6" x 10" - 6", Gauge: 28 GA, Insulation Type: R8
Cody648.jpg6" x 10" x 6" Hi Side Insulated Boot
Locke Part #: L7041MFG Part #: 6486106 Compare
Size (in): 6 x 10 x 6
Cody645.jpg6" x 10" x 6" Insulated Register Boot
Locke Part #: L0157MFG Part #: 6456106 Compare
Size (in): 6 x 10 x 6 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
279Cody.jpg6" x 10" x 6" Register Boot with 24” Plate
Locke Part #: L1170MFG Part #: 2796106 Compare
Material: Galvanized Metal, Size (in): 6 x 10 x 6 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Material: Galvanized Steel, Size (in): 6 x 10 x 6 30 GA Galvanized Steel, 1 Flange for Rails
Cody214.jpg6" x 10" x 6" Universal Uninsulated Register Boot
Locke Part #: L1216MFG Part #: 2146106 Compare
Material: Galvanized Metal, Size (in): 6 x 10 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody645.jpg6" x 10" x 6"Insulated Register Boot R8 Lined, 28 Gauge
Locke Part #: L7406MFG Part #: 645R8286106 Compare
Gauge: 28, Size (in): 6 x 10 x 6 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody648.jpg6" x 12" x 7" Hi Side Insulated Boot
Locke Part #: L7042MFG Part #: 6486127 Compare
Size (in): 6 x 12 x 7
Cody645.jpg6" x 12" x 7" Insulated Register Boot
Locke Part #: L0156MFG Part #: 6456127 Compare
Size (in): 6 x 12 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Gauge: 28, Size (in): 6 x 12 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Steel, Size (in): 6 x 12 x 7 30 GA Galvanized Steel, 1 Flange for Rails
Cody214.jpg6" x 12" x 7" Universal Uninsulated Register Boot
Locke Part #: L1217MFG Part #: 2146127 Compare
Material: Galvanized Metal, Size (in): 6 x 12 x 7, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody645.jpg6" x 12" x 8" Insulated Register Boot
Locke Part #: L0049MFG Part #: 6456128 Compare
Size (in): 6 x 12 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Gauge: 28, Size (in): 6 x 12 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Steel, Size (in): 6 x 12 x 8 30 GA Galvanized Steel, 1 Flange for Rails
Size: 6" x 14" - 8", Gauge: 28 GA, Insulation Type: R8
Cody648.jpg6" x 14" x 8" Hi Side Insulated Boot
Locke Part #: L7043MFG Part #: 6486148 Compare
Size (in): 6 x 14 x 8
Cody645.jpg6" x 14" x 8" Insulated Register Boot
Locke Part #: L0155MFG Part #: 6456148 Compare
Size (in): 6 x 14 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Gauge: 28, Size (in): 6 x 14 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Steel, Size (in): 6 x 14 x 8 30 GA Galvanized Steel, 1 Flange for Rails
Cody214.jpg6" x 14" x 8" Universal Uninsulated Register Boot
Locke Part #: L1218MFG Part #: 2146148 Compare
Material: Galvanized Metal, Size (in): 6 x 14 x 8, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)
Cody400.jpg6" x 4" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0288MFG Part #: 40046 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 6 x 4 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg6" x 4" x 4" Wye
Locke Part #: L0210MFG Part #: 800644 Compare
Material: Galvanized Metal, Size (in): 6 x 4 x 4 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody104.jpg6" x 4’ Furnace Pipe, 28 Gauge
Locke Part #: L7002MFG Part #: 104266 Compare
Gauge: 28, Size (in): 6, Length (ft): 4
Cody400.jpg6" x 5" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0287MFG Part #: 40056 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 6 x 5 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg6" x 5" x 5" Wye
Locke Part #: L0212MFG Part #: 800655 Compare
Material: Galvanized Metal, Size (in): 6 x 5 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L106-L118Cody.jpg6" x 5’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0119MFG Part #: 105286 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L106-L118Cody.jpg6" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0102MFG Part #: 1056 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
602.jpg6" x 6" - 5" Insulated Register Boot with R6 Liner
Locke Part #: L7049MFG Part #: 602R6665 Compare
Size: 6" x 6" - 5", Insulation Type: R6
Size: 6" x 6" - 5", Gauge: 28 GA, Insulation Type: R8
Cody602R6_R8.jpg6" x 6" x 4" Air Tite Register Boot, R6 Insulator
Locke Part #: L7079MFG Part #: 602R6664 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 4 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
Cody641.jpg6" x 6" x 4" Insulated Box with 4 Corner Tabs
Locke Part #: L1157MFG Part #: 641664 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 4 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 6 x 6 x 4 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody645.jpg6" x 6" x 4" Insulated Register Boot
Locke Part #: L0151MFG Part #: 645664 Compare
Size (in): 6 x 6 x 4 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Gauge: 28, Size (in): 6 x 6 x 4 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Metal, Gauge: 30, Size (in): 6 x 6 x 4 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Material: Galvanized Metal, Gauge: 28, Size (in): 6 x 6 x 4 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
L50-L1222Cody.jpg6" x 6" x 4" Register Box with Rails & Flange
Locke Part #: L0185MFG Part #: 624664 Compare
Size (in): 6 x 6 x 4
L213-L240Cody.jpg6" x 6" x 4" Wye
Locke Part #: L0209MFG Part #: 800664 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 4 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody648.jpg6" x 6" x 5" Hi Side Insulated Boot
Locke Part #: L7040MFG Part #: 648665 Compare
Size (in): 6 x 6 x 5
Cody645.jpg6" x 6" x 5" Insulated Register Boot
Locke Part #: L0193MFG Part #: 645665 Compare
Size (in): 6 x 6 x 5 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
279Cody.jpg6" x 6" x 5" Register Boot with 24” Plate
Locke Part #: L1180MFG Part #: 279665 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 5 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
L50-L1222Cody.jpg6" x 6" x 5" Register Box with Rails & Flange
Locke Part #: L0198MFG Part #: 624665 Compare
Size (in): 6 x 6 x 5
Gauge: 28, Size (in): 6 x 6 x 5 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody825.jpg6" x 6" x 6" Furnace Tee
Locke Part #: L1203MFG Part #: 825666 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 6 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Cody645.jpg6" x 6" x 6" Insulated Register Boot
Locke Part #: L0176MFG Part #: 645666 Compare
Size (in): 6 x 6 x 6 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Metal, Gauge: 30, Size (in): 6 x 6 x 6 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Material: Galvanized Metal, Gauge: 28, Size (in): 6 x 6 x 6 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
279Cody.jpg6" x 6" x 6" Register Boot with 24” Plate
Locke Part #: L1181MFG Part #: 279666 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 6 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Material: Galvanized Steel, Size (in): 6 x 6 x 6 30 GA Galvanized Steel, 1 Flange for Rails
L50-L1222Cody.jpg6" x 6" x 6" Register Box with Rails & Flange
Locke Part #: L0184MFG Part #: 624666 Compare
Size (in): 6 x 6 x 6
Cody801.jpg6" x 6" x 6" Sealed Wye
Locke Part #: L7086MFG Part #: 801666 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg6" x 6" x 6" Wye
Locke Part #: L0211MFG Part #: 800666 Compare
Material: Galvanized Metal, Size (in): 6 x 6 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Gauge: 28, Size (in): 6 x 6 x 6 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Size (in): 6 x 8 Increase type with flange & damper
Product Image Not Available641 6X12X6 INSUL BOOT
Locke Part #: L7454MFG Part #: 6416126 Compare
Product Image Not Available641 6X12X8 INSUL BOOT
Locke Part #: L7455MFG Part #: 6416128 Compare
Product Image Not Available651-R6 10X6X6 REG BOOT W/EL&REG BOOT FOR RAILS
Locke Part #: L7477MFG Part #: 651R66106 Compare
Product Image Not Available651-R6 12X6X7 REG BOOT W/EL&FLANGE FOR RAILS
Locke Part #: L7478MFG Part #: 651R66127 Compare
Product Image Not Available651-R6 14X6X8 REG BOOT W/EL&FLANGE FOR RAILS
Locke Part #: L7479MFG Part #: 651R66148 Compare
Product Image Not Available651-R6 14X8X9 REG BOOT W/EL&FLANGE FOR RAILS
Locke Part #: L7480MFG Part #: 651R68149 Compare
Product Image Not Available651-R6 8X4X5 REG BOOT W/EL&FLANGE FOR RAILS
Locke Part #: L7476MFG Part #: 651R6485 Compare
Product Image Not Available651-R8 12X12X10 INSUL BX 28GA
Locke Part #: L7426MFG Part #: 651R828121210 Compare
L120-L132Cody.jpg7" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0124MFG Part #: 1257 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 7, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody320.jpg7" Inline Adjustable Damper
Locke Part #: L7034MFG Part #: 3207 Compare
Material: Galvanized Metal, Diameter (in): 7 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Cody104.jpg7" x 4’ Furnace Pipe, 28 Gauge
Locke Part #: L7003MFG Part #: 104267 Compare
Gauge: 28, Size (in): 7, Length (ft): 4
Cody400.jpg7" x 5" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0290MFG Part #: 40057 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 7 x 5 Constructed of Galvanized Metal, Collars are Hemmed
Cody801.jpg7" x 5" x 5" Sealed Wye
Locke Part #: L7087MFG Part #: 801755 Compare
Material: Galvanized Metal, Size (in): 7 x 5 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg7" x 5" x 5" Wye
Locke Part #: L0213MFG Part #: 800755 Compare
Material: Galvanized Metal, Size (in): 7 x 5 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L106-L118Cody.jpg7" x 5’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0138MFG Part #: 105287 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L106-L118Cody.jpg7" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0103MFG Part #: 1057 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody400.jpg7" x 6" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0289MFG Part #: 40067 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 7 x 6 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg7" x 6" x 4" Wye
Locke Part #: L0217MFG Part #: 800764 Compare
Material: Galvanized Metal, Size (in): 7 x 6 x 4 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg7" x 6" x 5" Wye
Locke Part #: L0218MFG Part #: 800765 Compare
Material: Galvanized Metal, Size (in): 7 x 6 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg7" x 6" x 6" Wye
Locke Part #: L0214MFG Part #: 800766 Compare
Material: Galvanized Metal, Size (in): 7 x 6 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg7" x 7" x 6" Wye
Locke Part #: L0215MFG Part #: 800776 Compare
Material: Galvanized Metal, Size (in): 7 x 7 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody825.jpg7" x 7" x 7" Furnace Tee
Locke Part #: L1204MFG Part #: 825777 Compare
Material: Galvanized Metal, Size (in): 7 x 7 x 7 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
L213-L240Cody.jpg7" x 7" x 7" Wye
Locke Part #: L0216MFG Part #: 800777 Compare
Material: Galvanized Metal, Size (in): 7 x 7 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Product Image Not Available786 10X6 UPPER COMBUST BOX W/ FLANGE
Locke Part #: L9010MFG Part #: 786610 Compare
Product Image Not Available786L 14 X 4 LOWER COMBU BOX
Locke Part #: L9011MFG Part #: 786L Compare
L120-L132Cody.jpg8" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7025MFG Part #: 125268 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 8, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg8" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0125MFG Part #: 1258 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 8, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody570.jpg8" Air Duct Connector
Locke Part #: L0085MFG Part #: 570-8" Compare
Used as couplings between lengths of PVC warm air duct pipe.
Cody320.jpg8" Inline Adjustable Damper
Locke Part #: L7035MFG Part #: 3208 Compare
Material: Galvanized Metal, Diameter (in): 8 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
Cody698.jpg8" Round Ceiling Diffuser Box with Damper
Locke Part #: L0063MFG Part #: 6988 Compare
Size (in): 8
Size (in): 8 x 10 Increase type with flange & damper
Cody645.jpg8" x 14" x 9" Insulated Register Boot
Locke Part #: L0153MFG Part #: 6458149 Compare
Size (in): 8 x 14 x 9 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Gauge: 28, Size (in): 8 x 14 x 9 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Cody641.jpg8" x 4" x 5" Insulated Box with 4 Corner Tabs
Locke Part #: L1160MFG Part #: 641485 Compare
Material: Galvanized Metal, Size (in): 8 x 4 x 5 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 8 x 4 x 5 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody640.jpg8" x 4" x 5" Insulated Box without flange
Locke Part #: L0160MFG Part #: 640485 Compare
Material: Galvanized Metal, Size (in): 8 x 4 x 5 Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall
L50-L1222Cody.jpg8" x 4" x 5" Register Box with Rails & Flange
Locke Part #: L1221MFG Part #: 624485 Compare
Size (in): 8 x 4 x 5
L50-L1222Cody.jpg8" x 4" x 6" Register Box with Rails & Flange
Locke Part #: L1219MFG Part #: 624486 Compare
Size (in): 8 x 4 x 6
Cody104.jpg8" x 4’ Furnace Pipe, 28 Gauge
Locke Part #: L7004MFG Part #: 104268 Compare
Gauge: 28, Size (in): 8, Length (ft): 4
L106-L118Cody.jpg8" x 5’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0115MFG Part #: 105288 Compare
Size: 8" x 5’, Gauge: 28 Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L106-L118Cody.jpg8" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0104MFG Part #: 1058 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody400.jpg8" x 6" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0292MFG Part #: 40068 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 8 x 6 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg8" x 6" x 4" Wye
Locke Part #: L0258MFG Part #: 800864 Compare
Material: Galvanized Metal, Size (in): 8 x 6 x 4 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg8" x 6" x 5" Wye
Locke Part #: L0219MFG Part #: 800865 Compare
Material: Galvanized Metal, Size (in): 8 x 6 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody801.jpg8" x 6" x 6" Sealed Wye
Locke Part #: L7088MFG Part #: 801866 Compare
Material: Galvanized Metal, Size (in): 8 x 6 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg8" x 6" x 6" Wye
Locke Part #: L0224MFG Part #: 800866 Compare
Material: Galvanized Metal, Size (in): 8 x 6 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody400.jpg8" x 7" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0291MFG Part #: 40078 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 8 x 7 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg8" x 7" x 5" Wye
Locke Part #: L0225MFG Part #: 800875 Compare
Material: Galvanized Metal, Size (in): 8 x 7 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg8" x 7" x 6" Wye
Locke Part #: L0223MFG Part #: 800876 Compare
Material: Galvanized Metal, Size (in): 8 x 7 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Size: 8" x 8" - 6", Gauge: 28 GA, Insulation Type: R8
602.jpg8" x 8" - 7" Insulated Register Boot with R6 Liner
Locke Part #: L7047MFG Part #: 602R6887 Compare
Size: 8" x 8" - 7", Insulation Type: R6
Size: 8" x 8" - 7", Gauge: 28 GA, Insulation Type: R8
L213-L240Cody.jpg8" x 8" x 4" Wye
Locke Part #: L0257MFG Part #: 800884 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 4 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody602R6_R8.jpg8" x 8" x 6" Air Tite Register Boot, R6 Insulator
Locke Part #: L7080MFG Part #: 602R6886 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 6 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8
Cody648.jpg8" x 8" x 6" Hi Side Insulated Boot
Locke Part #: L7045MFG Part #: 648886 Compare
Size (in): 8 x 8 x 6
Cody641.jpg8" x 8" x 6" Insulated Box with 4 Corner Tabs
Locke Part #: L1158MFG Part #: 641886 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Material: Galvanized Metal, Gauge: 28, Size (in): 8 x 8 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs
Cody645.jpg8" x 8" x 6" Insulated Register Boot
Locke Part #: L0152MFG Part #: 645886 Compare
Size (in): 8 x 8 x 6 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Gauge: 28, Size (in): 8 x 8 x 6 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Material: Galvanized Metal, Gauge: 30, Size (in): 8 x 8 x 6 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Material: Galvanized Metal, Gauge: 28, Size (in): 8 x 8 x 6 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
279Cody.jpg8" x 8" x 6" Register Boot with 24” Plate
Locke Part #: L1182MFG Part #: 279886 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 6 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
Material: Galvanized Steel, Size (in): 8 x 8 x 6 30 GA Galvanized Steel, 1 Flange for Rails
L50-L1222Cody.jpg8" x 8" x 6" Register Box with Rails & Flange
Locke Part #: L0186MFG Part #: 624886 Compare
Size (in): 8 x 8 x 6
L213-L240Cody.jpg8" x 8" x 6" Wye
Locke Part #: L0220MFG Part #: 800886 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody648.jpg8" x 8" x 7" Hi Side Insulated Boot
Locke Part #: L7046MFG Part #: 648887 Compare
Size (in): 8 x 8 x 7
Cody645.jpg8" x 8" x 7" Insulated Register Boot
Locke Part #: L0173MFG Part #: 645887 Compare
Size (in): 8 x 8 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
Gauge: 28, Size (in): 8 x 8 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8
279Cody.jpg8" x 8" x 7" Register Boot with 24” Plate
Locke Part #: L1183MFG Part #: 279887 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 7 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings
L50-L1222Cody.jpg8" x 8" x 7" Register Box with Rails & Flange
Locke Part #: L0199MFG Part #: 624887 Compare
Size (in): 8 x 8 x 7
L213-L240Cody.jpg8" x 8" x 7" Wye
Locke Part #: L0221MFG Part #: 800887 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody825.jpg8" x 8" x 8" Furnace Tee
Locke Part #: L1205MFG Part #: 825888 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 8 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C
Material: Galvanized Metal, Gauge: 30, Size (in): 8 x 8 x 8 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Material: Galvanized Metal, Gauge: 28, Size (in): 8 x 8 x 8 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product
Material: Galvanized Steel, Size (in): 8 x 8 x 8 30 GA Galvanized Steel, 1 Flange for Rails
L50-L1222Cody.jpg8" x 8" x 8" Register Box with Rails & Flange
Locke Part #: L0200MFG Part #: 624888 Compare
Size (in): 8 x 8 x 8
L213-L240Cody.jpg8" x 8" x 8" Wye
Locke Part #: L0222MFG Part #: 800888 Compare
Material: Galvanized Metal, Size (in): 8 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L120-L132Cody.jpg9" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7026MFG Part #: 125269 Compare
Material: Galvanized Metal, Gauge: 26, Size (in): 9, Throat Dimension: 3.5" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
L120-L132Cody.jpg9" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0126MFG Part #: 1259 Compare
Material: Galvanized Metal, Gauge: 30, Size (in): 9, Throat Dimension: 3.5" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14
Cody320.jpg9" Inline Adjustable Damper
Locke Part #: L7036MFG Part #: 3209 Compare
Material: Galvanized Metal, Diameter (in): 9 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request
L106-L118Cody.jpg9" x 5’ Snap Lock Furnace Pipe, 28 Gauge
Locke Part #: L0139MFG Part #: 105289 Compare
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
L106-L118Cody.jpg9" x 5’ Snap Lock Furnace Pipe, 30 Gauge
Locke Part #: L0105MFG Part #: 1059 Compare
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 .
Cody400.jpg9" x 7" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0294MFG Part #: 40079 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 9 x 7 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg9" x 7" x 5" Wye
Locke Part #: L0227MFG Part #: 800975 Compare
Material: Galvanized Metal, Size (in): 9 x 7 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg9" x 7" x 6" Wye
Locke Part #: L0230MFG Part #: 800976 Compare
Material: Galvanized Metal, Size (in): 9 x 7 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody801.jpg9" x 7" x 7" Sealed Wye
Locke Part #: L7089MFG Part #: 801977 Compare
Material: Galvanized Metal, Size (in): 9 x 7 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg9" x 7" x 7" Wye
Locke Part #: L0228MFG Part #: 800977 Compare
Material: Galvanized Metal, Size (in): 9 x 7 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Cody400.jpg9" x 8" Sheet Metal Reducer No Crimp, 28 Gauge
Locke Part #: L0293MFG Part #: 40089 Compare
Material: Galvanized Metal, Gauge: 28, Size (in): 9 x 8 Constructed of Galvanized Metal, Collars are Hemmed
L213-L240Cody.jpg9" x 8" x 5" Wye
Locke Part #: L0226MFG Part #: 800985 Compare
Material: Galvanized Metal, Size (in): 9 x 8 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg9" x 8" x 6" Wye
Locke Part #: L0229MFG Part #: 800986 Compare
Material: Galvanized Metal, Size (in): 9 x 8 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
L213-L240Cody.jpg9" x 8" x 7" Wye
Locke Part #: L0231MFG Part #: 800987 Compare
Material: Galvanized Metal, Size (in): 9 x 8 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C
Product Image Not Available950 3" SINGLE WALL CAP
Locke Part #: L0014MFG Part #: 9503 Compare
Product Image Not Available990 1"X100' NONPERF HNGER STRP
Locke Part #: L6144MFG Part #: 990 1X100 Compare
L500.jpgGlastite Flexible Duct Connector
Locke Part #: L0500MFG Part #: CNRG100 Compare
Description Ext.: GLASSTITE FLEXIBLE DUCT 1-3/4" Metal, 3" Fabric, 1-3/4" Metal 28 Ga. Galvanized, "S LOC" SEAM
Product Image Not AvailableSST SYSTEM SVC TRNSITION A TO B R6 083-SST-AB-CL
Locke Part #: L6077MFG Part #: 083SSTABCL Compare
Product Image Not AvailableSST SYSTEM SVC TRNSITION B TO C R6 083-SST-BC-CL
Locke Part #: L6078MFG Part #: 083SSTBCCL Compare