| Range Inches of Water: 0 - 1.0, Minor Divisions: 0.02 | Magnehelic gage, for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit the needs precisely, Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential., The design resists shock, vibration and over-pressures., No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too., It checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment. | |
| For use with Qt Geothermal Flow Centers (L5529) | ||
| Color: BLK, Size: 1 1/4, Diameter: 1-1/4", ID: 1.358", OD: 1.660", Wall: .151", Weight/feet: .306, Straight Lengths: 20’ | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Color: BLK, Size: 1, Diameter: 1", Coil Lengths in ft: 410’, Standard Stock SDR 11: 410’ (205’ x 205’) | Centennial Bullet U-Bend Fittings accommodate pipe in 1" and 3/4" diameters and are the narrowest U-bend fiitings on the market today. The smaller diameter of these fittings reduce installation costs in two significant ways:, They allow for a narrower bore hole which requires less grout., The narrower bore holes require less annular space resulting in more efficient drilling.In addition, Centennial Bullet U-Bend fittings allow for the easy insertion of Centennial Cenfuse Geothermal pipe into the bore hole:, Fitting vents allow material to be displaced as the bullet fitting is inserted into the bore hole., Knockouts are provided for directional/horizontal boring applications. | |
| Color: BLK, Size: 1, Diameter: 1", Coil Lengths in ft: 510’, Standard Stock SDR 11: 510’ (255’ x 255’) | Centennial Bullet U-Bend Fittings accommodate pipe in 1" and 3/4" diameters and are the narrowest U-bend fiitings on the market today. The smaller diameter of these fittings reduce installation costs in two significant ways:, They allow for a narrower bore hole which requires less grout., The narrower bore holes require less annular space resulting in more efficient drilling.In addition, Centennial Bullet U-Bend fittings allow for the easy insertion of Centennial Cenfuse Geothermal pipe into the bore hole:, Fitting vents allow material to be displaced as the bullet fitting is inserted into the bore hole., Knockouts are provided for directional/horizontal boring applications. | |
| Color: BLK, Size: 2, Diameter: 2", ID: 1.943", OD: 2.375", Wall: .216", Weight/feet: .627, Straight Lengths: 20’ | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Size: 3/4" IPS, Weight: 0.14, Packaging: 100 | ||
| Color: BLK, Size: 42798, Diameter: 3/4", Coil Lengths in ft: 410’, Standard Stock SDR 11: 410’ (205’ x 205’) | Centennial Bullet U-Bend Fittings accommodate pipe in 1" and 3/4" diameters and are the narrowest U-bend fiitings on the market today. The smaller diameter of these fittings reduce installation costs in two significant ways:, They allow for a narrower bore hole which requires less grout., The narrower bore holes require less annular space resulting in more efficient drilling.In addition, Centennial Bullet U-Bend fittings allow for the easy insertion of Centennial Cenfuse Geothermal pipe into the bore hole:, Fitting vents allow material to be displaced as the bullet fitting is inserted into the bore hole., Knockouts are provided for directional/horizontal boring applications. | |
| Color: BLK, Size: 42798, Diameter: 3/4", Coil Lengths in ft: 510’, Standard Stock SDR 11: 510’ (255’ x 255’) | Centennial Bullet U-Bend Fittings accommodate pipe in 1" and 3/4" diameters and are the narrowest U-bend fiitings on the market today. The smaller diameter of these fittings reduce installation costs in two significant ways:, They allow for a narrower bore hole which requires less grout., The narrower bore holes require less annular space resulting in more efficient drilling.In addition, Centennial Bullet U-Bend fittings allow for the easy insertion of Centennial Cenfuse Geothermal pipe into the bore hole:, Fitting vents allow material to be displaced as the bullet fitting is inserted into the bore hole., Knockouts are provided for directional/horizontal boring applications. | |
| 3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump | ||
| 3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump | ||
| 3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump | ||
| 3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump | ||
| Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor. | ||
| Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor. | ||
| 3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump | ||
| 3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump | ||
| Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor. | ||
| Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor. | ||
| 3 Separate Components ~ 1 Single Solution, Capable of Upflow, Downflow and Horizontal Applications., Cooling Capacity: 26,200 - 66,000 Btuh, Cooling Efficiency: Up to 30.4 EER, Heating Capacity: 23,000 - 60,000 Btuh, Heating Efficiency: Up to 6.1 COP, AHRi Certified - ETL US Listed, Energy Star Certified, Standard, R-410A Refrigerant, Scroll Step Capacity Compressor, Liquid Line Filter Drier, High Efficiency Coaxial Water Coil, High & Low Pressure Control, Service Access Ports, ECM 2.3 Blower Motor, Color: White Cabinet Finish, These systems all use the same blower section., The 4 and 5 ton use the same "A" coil section., The lineset is only use if they are not remote mounting the compressor section., Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on, textured enamel which allows it to withstand 1000 hours of salt spray exposure., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity (2-stage) scroll compressors are designed for increased efficiency, quieter operation and improved reliability for longer life., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., Liquid Line Drier:, Protects system against moisture., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., High pressure Switch:, Provides additional protection for the system., Low pressure Switch:, Two switches provided. Factory wired switch, is for ground water applications, alternate switch is field connected for ground loop applications., Control panel:, Mid-level for easy access. Blower section includes transformer and blower control., High Efficiency Coaxial Water Coil in either Copper or Cupronickel, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., indoor Air Coil:, Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Water Connections:, All water connections on outside of cabinet. Brass full swivel double o-ring connection with 1" full flow ports., Refrigerant Connections:, Special self-sealing fittings are used with 3' line set for stacked upflow or downflow applications, and line sets up to 50' available for horizontal or dual-fuel applications., Service Access ports:, Permits service pressure check of discharge and suction pressures., Filter Rack (Optional):, Accessory kit with 1" filter (reversible for left or right side access for upflow installations)., Accessory Electric Duct Heater Option:, 5, 10, 15 and 20KW nominal size. Field installed external to unit. For upflow and horizontal duct installation only., Optional Accessories:, Room thermostat - Water accessory kit - Waterflow controls., Domestic Hot Water Heat Exchanger System:, Double wall vented heat exchanger and pump | ||
| Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor. | ||
| Cooling Capacity: 16,400 - 68,000 Btuh, Cooling Efficiency: 9.00 - 9.50 EER, Heating Capacity: 12,799 - 68,260 Btuh, AHRI Certified - ETL US Listed, Standard, R-410A Refrigerant, Copeland Scroll Compressor, Liquid Line Filter Drier, Compressor Control Module, HPC/LPC Control Modules, Phase Rotation Monitor - 3 Phase Models, Lockable Hinged Disconnect Door, Slope Top I Rain Flashing, Full-Length Mounting Brackets, Color: Beige Cabinet Finish, Engineered Features, Aluminum Finned Copper Coils:, Grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency., Twin Blowers:, Move air quietly. Most models feature multispeed blower motors providing airflow adjustment for high and low static operation. Motor overload protection is standard on all models., Air Conditioner Compressor:, Scroll Compressors eliminate need for crankcase heater. Standard on all models., R-410A Refrigerant:, Designed with R-410A (HFC) nonozone depleting refrigerant in compliance with the Montreal protocol and 2010 EPA requirements., phase Rotation Monitor:, Standard on all 3 phase scroll compressors. Protects against reverse rotation if power supply is not properly connected., Galvanized 20 Gauge zinc Coated Steel Cabinet:, Cleaned, rinsed, sealed and dried before the polyurethane primer is applied. The cabinet is handsomely finished with a baked on textured enamel, which allows it to withstand 1000 hours of salt spray tests per ASTM B117-03., Foil Faced insulation:, Standard on all units., Full Length Mounting Brackets:, Built into cabinet for improved appearance and easy installation. NOTE: Bottom mounting bracket included to assist in installation., Electrical Components:, Are easily accessible for routine inspection and maintenance through a right side, service panel opening. Features a lockable, hinged access cover to the circuit breaker or toggle disconnect switch., Electric Heat Strips:, Features an automatic limit and thermal cut-off safety control. Heater packages can be factory or field installed for all 1-1/2 through 5 ton models., Filter Service Door:, Separate service door provides easy access for filter change., One inch, Disposable Air Filters:, Are standard equipment. Optional one inch washable filters available and filter racks permit the addition of 2" pleated filter. Factory or field installed., Condenser Fan and Motor Shroud Assembly:, Slides out for easy access., Barometric Fresh Air Damper:, Standard on all units. Allows up to 25% outside fresh air. Optional ventilation packages available., Built-in Circuit Breakers:, Standard on all electric heat versions of single (230/208 volt) and three phase (230/208 volt) equipment. Toggle disconnects are standard on all electric heat versions of three phase (460 volt) equipment., Slope Top:, Standard feature for water run-off., Top Rain Flashing:, Standard feature on all models., Liquid Line Filter Drier:, Standard on all units. Protects system against moisture., Compressor Control Module:, High & Low pressure Switches are Auto-Reset:, Standard on all units. Built-in lockout circuit resets from the room thermostat. Provides commercial quality protection to the compressor. | ||
| Diameter: 1", ID: 1.077", OD: 1.315", Wall: .120", Weight/feet: .191, Straight Lengths: 20’ | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Diameter: 1-1/2", ID: 1.554", OD: 1.900", Wall: .173", Weight/feet: .402, Straight Lengths: 20’ | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Diameter: 3/4", ID: .860", OD: 1.050", Wall: .095", Weight/feet: .122, Straight Lengths: 20’ | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Diameter: 1-1/2", ID: 1.554", OD: 1.900", Coil Lengths in ft: 200’, Wall: .173", Weight/feet: .402, Straight Lengths: 20’ | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Diameter: 1-1/4", ID: 1.358", OD: 1.660", Coil Lengths in ft: 200’, Wall: .151", Weight/feet: .306, Straight Lengths: 20’, 40’ | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Diameter: 3/4", ID: .860", OD: 1.050", Coil Lengths in ft: 600’, Wall: .095", Weight/feet: .122, Straight Lengths: - | Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. | |
| Weight: 192, HP: 1.5, GPM: 60 | 13" Flat Free Wheels, 14 Gauge Stainless Steel Tank, Stainless Steel Piping, 2 - 10 FT Hoses, Tank Volume 10 Gallon, Quick Connect Couplings, Lift Out Filter Screen,, Weight: 192, ACC-(2)1" 10 FT Hose, 1" Camlock, Pump 60 gpm @ 68 FT Head | |
| Capacity: 3 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 26, Rated Load Amps 230/208: 12.4/14.5, Lock Rotor Amps 230/208: 82/82, Hp/ Speed/ Type: 1/2 / 5 / ECM, Motor Amps: 2.5 / 2.95, Air Filters 2" Pleated MERV 6: 20 x 25 x 2 (1), Shipping Weight Lbs.: 345 | Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197 | |
| Capacity: 4 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 32, Rated Load Amps 230/208: 17.4/20.6, Lock Rotor Amps 230/208: 96/96, Hp/ Speed/ Type: 1/2 / 5 / ECM, Motor Amps: 2.8 / 3.0, Air Filters 2" Pleated MERV 6: 16 x 25 x 2 (2), Shipping Weight Lbs.: 390 | Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197 | |
| Capacity: 5 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 38, Rated Load Amps 230/208: 22.4/27.4, Lock Rotor Amps 230/208: 118/118, Hp/ Speed/ Type: 3/4 / 5 / ECM, Motor Amps: 3.8 / 4.1, Air Filters 2" Pleated MERV 6: 16 x 25 x 2 (2), Shipping Weight Lbs.: 440 | Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197 | |
| Capacity: 6 Ton, Volts: 230/208, Voltage Range: 253-197, Min. Circuit Amps: 41, Rated Load Amps 230/208: 24.7/28.5, Lock Rotor Amps 230/208: 150/150, Hp/ Speed/ Type: 3/4 / 5 / ECM, Motor Amps: 4.1 / 4.2, Air Filters 2" Pleated MERV 6: 16 x 25 x 2 (2), Shipping Weight Lbs.: 450 | Typical Installation, Unit installs upright and hooks up conveniently to supply water system. Ideal for closet, basement, or utility room installation. Requires very little floor space. Can be installed with or without return air duct., Ground Water Application: Water Temp 45 to 75, Ground Loop Application: Temp Range 25 to 110, Engineered Features, Steel Cabinet:, Galvanized 20 gauge zinc coated steel cabinet with baked-on enamel., Multi-Capacity Two-Stage:, Step Capacity Compressor:, Copeland step-capacity scroll compressors are designed for increased efficiency, quieter operation and improved reliability., R-410A Refrigerant:, Designed with R-410A (HFC) non-ozone depleting refrigerant., Liquid Line Drier:, Protects system against moisture., Lockout Circuit:, Built-in lockout circuit resets from the room thermostat. Provides commercial quality compressor protection., High pressure Switch:, Provides additional protection for the system., Control panel:, Can be reversed to other side for installation flexibility., Low pressure Switch:, Two switches provided. Factory wired switch is for ground water applications, alternate switch is field connected for ground loop applications., High Efficiency Copper Coaxial Water Coil:, Water to refrigerant coil is completely insulated to prevent frost build-up at low temperature operation., Indoor Air Coil:, Grooved copper tubing and enhanced louvered aluminum fin for maximum heat transfer and energy efficiency. Coil is constructed with special corrosion resistant hydrophilic fin stock with 2-layer coating., Filter Rack:, Factory installed with 2" MERV 6 pleated filter., Thermostatic Expansion Valve:, For wide range refrigerant control (2-way operation)., Domestic Hot Water Heat Exchanger:, Double wall vented heat exchanger, factory installed on all models - optional GVDM-26 pump kit required for hot water heating., Water Connections:, All water connections on outside of cabinet with dual side connections. Brass full swivel double o-ring connection with 1" full flow ports., Electric Heat:, Slide in Electric Heater Package - up to 18KW can be field installed., Variable Speed ECM Blower Motor:, High Efficiency, Soft starting - low noise on start up, Continuous fan - will operate at 50% of rated Stage 2 airflow, Mild Weather Operation:, Part Load Cooling Operation will operate at 20% reduced airflow, Voltage Range:, 253-197 | |
| 115v-60hz-1ph 6'Cord With 115v Grounded Plug, 5/8" OD Copper Water Line Connections, Can Be Mounted On Heat Pump Cabinet Or Adjacent Wall | ||
| Dimensions: 53" H x 22-1/2" W, Pump: 90 gpm @ 62 FT Head, HP: 2, Filter: In Tank; Double Woven Screen, Cart Material: Mild Steel, Tank Material: 304L SS, 14 gauge, Piping Size: 1-1/4", Valves Size: 1-1/4", Valves: Yellow Brass, Drain Valves: Stainless (Hose Bib), Hoses: 150 PSI Rubber Hose, Hose Size: 1-1/4" & 10’ Long, Electrical Plug: 20 Amp~ 115V, Hose Connections: 1-1/4" Cam and Groove, Total Weight: 196 lbs, Tank Volume: 10 Gallons | ||
| Voltage: 230, Width: 7-1/2", Depth: 14-3/4", Height: 34", HP: 1/6 (EA), Inlet/Outlet Size: 1" SWIVEL (FPT), # of Pump: 1, Amps Grundfos HI-Speed: 0.90 | ||
| Non Pressurized Flow Center, Eliminates Callbacks, Fast Installation, Removable Lid, Easy to Fill, Check Flow Rates*, Add Anti-Freeze, Air Separation Chamber, Continually Performs Purging Function, Foam insulation, Eliminates Unsightly Condensation, Solid Durable Construction, Long Life, Check Valve, Pump Protection, 2 Year Warranty, Customer Assurance, Swivel Connectors, Fast and Flexible Installation, Wall Bracket, Ease of Handling and Installation | ||
| Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position. | ||
| Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position. | ||
| Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position. | ||
| Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position. | ||
| Dimensions: 28" x 8", Outside Dimensions: 32-1/4" x 12-1/4", Flange Type: 2" Wide | Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position. | |
| Sidewall supply register - Extruded aluminum - No damper, with 2 sets of individually adjusted blades., Front blades in vertical position. | ||
| Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 1.0 Ton, EER: 10, Cooling Capacity BTUH: 12000, Minimum Circuit Ampacity: 27, Maximum External Fuse or Circuit Breaker: 30, Field Power Wire Size: 10, Ground Wire: 10, Heat Strip: 5.0 KW, Compressor RLA: 4.8/5.2, Compressor LRA: 26, Outdoor Fan Motor (HP-RPM-SP): 1/12-1075-1, Outdoor Fan Motor (FLA): 0.70, Indoor Blower Motor (HP-RPM-SP): 1/8-1650-1, Indoor Blower Motor (FLA): 0.70, CFM / ESP (Rated-WET Coil): 400/0.20 | ||
| Color: Beige, Width: 33.300", Depth: 17.125", Height: 70.563", Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 1.5 Ton, EER: 9.20, Cooling Capacity BTUH: 16400, Minimum Circuit Ampacity: 46, Maximum External Fuse or Circuit Breaker: 50, Field Power Wire Size: 8, Ground Wire: 10, Filter Options: 1" Throwaway | ||
| Color: Beige, Width: 33.300", Depth: 17.125", Height: 70.563", Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 2.0 Ton, EER: 9.0, Cooling Capacity BTUH: 24000, Minimum Circuit Ampacity: 46, Maximum External Fuse or Circuit Breaker: 50, Field Power Wire Size: 8, Ground Wire: 10, Filter Options: 1" Throwaway | ||
| Color: Beige, Width: 38.200", Depth: 17.125", Height: 70.563", Electrical Rating: 230/208 1 Phase 60hz, Operating Voltage: 197 - 253, Nominal Capacity: 2.5 Ton, EER: 9.0, Cooling Capacity BTUH: 29600, Minimum Circuit Ampacity: 58, Maximum External Fuse or Circuit Breaker: 60, Field Power Wire Size: 6, Ground Wire: 10, Filter Options: 1" Throwaway |
