Loading ...

Loading ...

Search in: Heating Equipment Category

Includes:, motor, housing, & blower wheel
Product Image Not Available1-7/8" S-Hook - 28 per pkg.
Locke Part #: L5681MFG Part #: JL-0798-SH Compare
L5690.jpg100,000 BTU
Locke Part #: L5693MFG Part #: EC-0100-NG / IL-0100-NG Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
L5690.jpg100,000 BTU
Locke Part #: L5694MFG Part #: EC-0100-LP Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
SEP100AN.jpg100,000 BTU Commercial Unit Heater
Locke Part #: L6201MFG Part #: SEP100AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 20-3/16 x 31-5/16, Nominal Gas Heat Input: 100,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 4, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 1900 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
RADIANT TUBE HEATERS.jpg110,000 BTU
Locke Part #: L5687MFG Part #: JS0561-XB Compare
RADIANT TUBE HEATERS.jpg110,000 BTU
Locke Part #: L5672MFG Part #: JS-S110-AN Compare
Capacity: 110,000 BTU
SEP100AN.jpg115,000 BTU Commercial Unit Heater
Locke Part #: L6203MFG Part #: SEP115AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 20-3/16 x 31-5/16, Nominal Gas Heat Input: 115,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 4, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 1900 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
FOAN125.jpg125,000 BTU Separated Combustion Unit Heater
Locke Part #: L6702MFG Part #: FOAN125 NAT Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 21.0 x 36.5 x 32.375, Nominal Gas Heat Input: 125,000, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.7, Motor RPMs: 1075, Air Volume (CFM): 2955 Perfect for light commercial and greenhouse applications, Introduces clean combustible outside air when required., Wiring junction box is located outside of unit, Ideal for hard-to-heat applications where excessive dust, dirt, humidity, or negative pressure is a concern., Heating capacities from 45,000 300,000 BTUH, Up to 82% thermal efficiency., Compact cabinet design on 45,000 75,000 BTUH models., Hinged door allows easy access to components., Sidewall venting eliminates roof penetrations., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., Tubular heat exchangers made of aluminized steel., Power exhaust system allows horizontal venting to 25 ft., Direct drive propeller fans are dynamically balanced for quiet and smooth opera.
RADIANT TUBE HEATERS.jpg130,000 BTU
Locke Part #: L5688MFG Part #: JS-0563-XB Compare
RADIANT TUBE HEATERS.jpg130,000 BTU
Locke Part #: L5673MFG Part #: JS-S130-AN Compare
Capacity: 130,000 BTU
SEP100AN.jpg145,000 BTU Commercial Unit Heater
Locke Part #: L6204MFG Part #: SEP145AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 20-3/16 x 31-5/16, Nominal Gas Heat Input: 145,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 4, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 1900 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Model: CDV156C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 18”, Depth: 9-3/4”, Height: 29-3/4”, Weight (Lbs): 65, Vent Size: 9", Gas Type: L.P., Input (Btu/hr): 15,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 22˝, Maximum Wall Thickness: 24”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top.
Model: CDV155C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 18”, Depth: 9-3/4”, Height: 29-3/4”, Weight (Lbs): 65, Vent Size: 9", Gas Type: Natural, Input (Btu/hr): 15,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 22˝, Maximum Wall Thickness: 24”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top.
L5689.jpg1500w Heater
Locke Part #: L5689MFG Part #: IEP1524 Compare
Short-wave infrared technology provides instant comfort heat., Restaurant/hotel patios, Sports venues, Balcony/terrace, Hobby shops, Garage/workshop, Warehouse facilities Indoor/Outdoor, 120v,1,500w, 5.6"w x 5.7"h x 4.4"d 5lb.
SEP100AN.jpg175,000 BTU Commercial Unit Heater
Locke Part #: L6205MFG Part #: SEP175AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 23-1/8 x 31-5/16, Nominal Gas Heat Input: 175,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 2200 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
SEP100AN.jpg195,000 BTU Commercial Unit Heater
Locke Part #: L6243MFG Part #: SEP200AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 23-1/8 x 31-5/16, Nominal Gas Heat Input: 195,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 2200 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Model: VC201B, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: Black, Type: Closed Front, Width: 24", Depth: 15-1⁄4", Height: 20", Weight (Lbs): 59, Vent Size: 3", Approx Shipping Weight: 59 lbs., Gas Type: Natural, Input (Btu/hr): 20,000, Control: Thermostat Bulb, Gas Inlet/Outlet Size: 1⁄2"- 3⁄8", Center of Vent to Floor: 16-1⁄4" Top Control provides no-stoop access for temperature selection, Unit Leveling Legs facilitate installation and compensate for uneven flooring., Thermostat Sensing Bulb monitors room temperature and maintains heat at desired setting., 100% Safety Pilot/Built-in Pressure Regulator cycles unit off in the event pilot flame is extinguished. Pressure regulator assures constant gas line pressure., Multi-Louvered Top directs warm air toward room. Assures maximum heat distribution., Continuous-Seam Welded, Combustion Chamber is durably constructed and assures maximum, rapid heat transfer. Warranted for 10 years (non pro-rated)., Matchless Spark Ignition eliminates the need for matches or lighting tools, Resettable Vent Spill Safety Device automatically shuts unit off in the event of flue blockage or incorrect vent installation.
RADIANT TUBE HEATERS.jpg20 Ft. Emissive Coated Tube Kit
Locke Part #: L5676MFG Part #: TS-1420-JZ Compare
SEP100AN.jpg230,000 BTU Commercial Unit Heater
Locke Part #: L6207MFG Part #: SEP230AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 41-1/8 x 31-5/16, Nominal Gas Heat Input: 230,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 3/4, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 4400 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Product Image Not Available24099 HEAT EXHANGER
Locke Part #: L0410MFG Part #: 24013 Compare
Model: W255G, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Shipping Weight: 90 lbs., Vent Size: 4”, Gas Inlet: 1/2”, Type Control: Wall Stat, Gas Type: Natural, Input (Btu/hr): 25,000, Control: MilliVolt, Finished Dimension: 16-1/2”W x 68”H x 6-1/2”D, Fan Kit Model: WFF81, Fan Kit Weight: 10 lbs. Neutral Bone Baked Enamel Finish -, resists fading and cleans easily with a damp cloth., Resettable Blocked Flue Safety Device -, automatically shuts the unit off in the event of flue blockage or incorrect vent installation., Unibody Grill Construction -, of heavy gauge steel eliminates heat warpage., Self Energizing Controls -, provide their own power, eliminating heat loss even during a power failure., 430 Stainless Steel, Ported Burner -, provides quiet ignition and extinction and excellent flame characteristics for Natural and L.P. gas., Low BTU Pilot -, is durably constructed of stainless steel and provides maximum efficiency during standby., Continuous Seam Welded Combustion Chamber -, constructed of heavy gauge steel, maximizes heat transfer and is warranted for ten (10) years., Optional Thermostatically Controlled Fan -, is available for single and dual wallfurnaces to enhance air circulation and eliminate air stratification., Wall Thermostat Standard -, Built-in Bulb Stat control optional.
Model: CDV256C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 34-1/2”, Depth: 9-3/4”, Height: 31-3/4”, Weight (Lbs): 99, Vent Size: 9", Gas Type: L.P., Input (Btu/hr): 25,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 24-1/8˝, Maximum Wall Thickness: 24”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top.
Model: CDV255C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 34-1/2”, Depth: 9-3/4”, Height: 31-3/4”, Weight (Lbs): 99, Vent Size: 9", Gas Type: Natural, Input (Btu/hr): 25,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 24-1/8˝, Maximum Wall Thickness: 24”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top.
FSAN30.jpg30,000 BTU Low Profile Unit Heater
Locke Part #: L6240MFG Part #: FSAN30A-1 Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 12.0 x 25.0 x 18.5, Nominal Gas Heat Input: 30,000, Flue Size Round (in): 3, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 1.7, Motor RPMs: 1650, Air Volume (CFM): 535 Residential low profile units, Self-diagnostic board with LED display improves troubleshooting., Sidewall venting eliminates roof penetrations., Wiring junction box is located inside of unit., 1 clearance from ceiling for easy installation., Heating capacities from 30,000 75,000 BTUH., Up to 81% thermal efficiency, Direct drive propeller fans are dynamically balanced for quiet and smooth operation, Power exhaust system allows horizontal venting to 25 ft., Tubular heat exchangers made of aluminized steel., Aluminized steel in shot burners provide efficient trouble free operation, Great for garages & shops.
RADIANT TUBE HEATERS.jpg30 Ft. Premium Radiant Tube Kit
Locke Part #: L5677MFG Part #: TS-1430-JZ Compare
SEP100AN.jpg300,000 BTU Commercial Unit Heater
Locke Part #: L6208MFG Part #: SEP300AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 41-1/8 x 31-5/16, Nominal Gas Heat Input: 300,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 3/4, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 4400 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
L5690.jpg33,000 BTU
Locke Part #: L5667MFG Part #: EC-0037-LP Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
Model: CDV335C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 34-1/2”, Depth: 9-3/4”, Height: 31-3/4”, Weight (Lbs): 99, Vent Size: 9", Gas Type: Natural, Input (Btu/hr): 33,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 24-1/8˝, Maximum Wall Thickness: 15”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top.
Model: CDV336C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 34-1/2”, Depth: 9-3/4”, Height: 31-3/4”, Weight (Lbs): 99, Vent Size: 9", Gas Type: L.P., Input (Btu/hr): 33,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 24-1/8˝, Maximum Wall Thickness: 15”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top.
L5690.jpg34,000 BTU
Locke Part #: L5690MFG Part #: EC-0037-NG Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
SEP100AN.jpg345,000 BTU Commercial Unit Heater
Locke Part #: L6209MFG Part #: SEP345AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 41-1/8 x 31-5/16, Nominal Gas Heat Input: 345,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 6, Gas Piping Size (in, NPT): 3/4, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 4400 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
Model: W356G, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Shipping Weight: 90 lbs., Vent Size: 4”, Gas Inlet: 1/2”, Type Control: Wall Stat, Gas Type: L.P., Input (Btu/hr): 35,000, Control: MilliVolt, Finished Dimension: 16-1/2”W x 68”H x 6-1/2”D, Fan Kit Model: WFF81, Fan Kit Weight: 10 lbs. Neutral Bone Baked Enamel Finish -, resists fading and cleans easily with a damp cloth., Resettable Blocked Flue Safety Device -, automatically shuts the unit off in the event of flue blockage or incorrect vent installation., Unibody Grill Construction -, of heavy gauge steel eliminates heat warpage., Self Energizing Controls -, provide their own power, eliminating heat loss even during a power failure., 430 Stainless Steel, Ported Burner -, provides quiet ignition and extinction and excellent flame characteristics for Natural and L.P. gas., Low BTU Pilot -, is durably constructed of stainless steel and provides maximum efficiency during standby., Continuous Seam Welded Combustion Chamber -, constructed of heavy gauge steel, maximizes heat transfer and is warranted for ten (10) years., Optional Thermostatically Controlled Fan -, is available for single and dual wallfurnaces to enhance air circulation and eliminate air stratification., Wall Thermostat Standard -, Built-in Bulb Stat control optional.
Model: W355G, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Shipping Weight: 90 lbs., Vent Size: 4”, Gas Inlet: 1/2”, Type Control: Wall Stat, Gas Type: Natural, Input (Btu/hr): 35,000, Control: MilliVolt, Finished Dimension: 16-1/2”W x 68”H x 6-1/2”D, Fan Kit Model: WFF81, Fan Kit Weight: 10 lbs. Neutral Bone Baked Enamel Finish -, resists fading and cleans easily with a damp cloth., Resettable Blocked Flue Safety Device -, automatically shuts the unit off in the event of flue blockage or incorrect vent installation., Unibody Grill Construction -, of heavy gauge steel eliminates heat warpage., Self Energizing Controls -, provide their own power, eliminating heat loss even during a power failure., 430 Stainless Steel, Ported Burner -, provides quiet ignition and extinction and excellent flame characteristics for Natural and L.P. gas., Low BTU Pilot -, is durably constructed of stainless steel and provides maximum efficiency during standby., Continuous Seam Welded Combustion Chamber -, constructed of heavy gauge steel, maximizes heat transfer and is warranted for ten (10) years., Optional Thermostatically Controlled Fan -, is available for single and dual wallfurnaces to enhance air circulation and eliminate air stratification., Wall Thermostat Standard -, Built-in Bulb Stat control optional.
Model: VC351B, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: Black, Type: Closed Front, Width: 30", Depth: 15-1⁄4", Height: 26", Weight (Lbs): 84, Vent Size: 4", Approx Shipping Weight: 84 lbs., Gas Type: Natural, Input (Btu/hr): 35,000, Control: Thermostat Bulb, Gas Inlet/Outlet Size: 1⁄2"- 3⁄8", Center of Vent to Floor: 21-3⁄4" Top Control provides no-stoop access for temperature selection, Unit Leveling Legs facilitate installation and compensate for uneven flooring., Thermostat Sensing Bulb monitors room temperature and maintains heat at desired setting., 100% Safety Pilot/Built-in Pressure Regulator cycles unit off in the event pilot flame is extinguished. Pressure regulator assures constant gas line pressure., Multi-Louvered Top directs warm air toward room. Assures maximum heat distribution., Continuous-Seam Welded, Combustion Chamber is durably constructed and assures maximum, rapid heat transfer. Warranted for 10 years (non pro-rated)., Matchless Spark Ignition eliminates the need for matches or lighting tools, Resettable Vent Spill Safety Device automatically shuts unit off in the event of flue blockage or incorrect vent installation.
Includes:, Part Description, Part No., 16" Vent Enclosure Side, 31360, 16" Vent Enclosure Front, 31355, 24" Vent Enclosure Side, 31367, 24" Vent Enclosure Front, 31366, 36" Vent Enclosure Side, 31385, 36" Vent Enclosure Front, 31380
Model: CF403D, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Amps: 2.25, Shipping Weight: 104 lbs, Blower Speed: 2, BTUH Input/Hr: 40000, CFM: 440, Dimensions WxHxD (in): 14-5/16 x 81-5/16 x 10-1/4, Gas Inlet: 1/2", Type Control: 24 Volts, Type Gas: Nat., Vent Size (Oval): 4" Wall Thermostat, Standing Pilot (Low BTU) or Intermittent Ignition Device, Aluminized, Continuous Seam-Welded Combustion Chamber, Resettable Blocked Flue Safety Device, Thermostatically Controlled Blower, Manual Spark Igniter, Multi-Port Stainless Steel Burner, Optional Side Outlet Kits, Mounts Quickly and Easily Between Wall Studs, Optional Cabinet Trim Kit
L5674.jpg40,000 Btuh, NG, 10’
Locke Part #: L5674MFG Part #: PU-R040-BN Compare
Minimal heat loss when doors are open: heats people and objects, not air Compact 10 ft total length design, Factory assembled burner to tube Installs directly from carton Includes: 24 volt thermostat, Hanging Chain,, Suspension Hooks
RADIANT TUBE HEATERS.jpg40 Ft. Premium Radiant Tube Kit
Locke Part #: L5678MFG Part #: TS-1040-JZ Compare
SEP100AN.jpg400,000 BTU Commercial Unit Heater
Locke Part #: L6249MFG Part #: SEP400AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 41-1/8 x 31-5/16, Nominal Gas Heat Input: 390,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 6, Gas Piping Size (in, NPT): 3/4, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 4400 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod.
FSAN30.jpg45,000 BTU Low Profile Unit Heater
Locke Part #: L6241MFG Part #: FSAN45A-1 Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 12.0 x 25.0 x 18.5, Nominal Gas Heat Input: 45,000, Flue Size Round (in): 3, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 1.7, Motor RPMs: 1650, Air Volume (CFM): 750 Residential low profile units, Self-diagnostic board with LED display improves troubleshooting., Sidewall venting eliminates roof penetrations., Wiring junction box is located inside of unit., 1 clearance from ceiling for easy installation., Heating capacities from 30,000 75,000 BTUH., Up to 81% thermal efficiency, Direct drive propeller fans are dynamically balanced for quiet and smooth operation, Power exhaust system allows horizontal venting to 25 ft., Tubular heat exchangers made of aluminized steel., Aluminized steel in shot burners provide efficient trouble free operation, Great for garages & shops.
Product Image Not Available49267 LP KIT FOR CF403D
Locke Part #: L0434MFG Part #: 49267 Kit to CF404D Compare
Product Image Not Available49297 LPKIT FOR CF553D
Locke Part #: L0436MFG Part #: 49297 Kit to CF554D Compare
L5690.jpg50,000 BTU
Locke Part #: L5668MFG Part #: EC-0050-LP Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
L5690.jpg50,000 BTU
Locke Part #: L5691MFG Part #: EC-0050-NG Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
Model: W506G, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Shipping Weight: 134 lbs., Vent Size: 4”, Gas Inlet: 1/2”, Type Control: Wall Stat, Gas Type: L.P., Input (Btu/hr): 50,000, Control: MilliVolt, Finished Dimension: 16-1/2”W x 68”H x 6-1/2”D, Fan Kit Model: WFF81, Fan Kit Weight: 10 lbs. Neutral Bone Baked Enamel Finish -, resists fading and cleans easily with a damp cloth., Resettable Blocked Flue Safety Device -, automatically shuts the unit off in the event of flue blockage or incorrect vent installation., Unibody Grill Construction -, of heavy gauge steel eliminates heat warpage., Self Energizing Controls -, provide their own power, eliminating heat loss even during a power failure., 430 Stainless Steel, Ported Burner -, provides quiet ignition and extinction and excellent flame characteristics for Natural and L.P. gas., Low BTU Pilot -, is durably constructed of stainless steel and provides maximum efficiency during standby., Continuous Seam Welded Combustion Chamber -, constructed of heavy gauge steel, maximizes heat transfer and is warranted for ten (10) years., Optional Thermostatically Controlled Fan -, is available for single and dual wallfurnaces to enhance air circulation and eliminate air stratification., Wall Thermostat Standard -, Built-in Bulb Stat control optional.
Model: W505G, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Shipping Weight: 134 lbs., Vent Size: 4”, Gas Inlet: 1/2”, Type Control: Wall Stat, Gas Type: Natural, Input (Btu/hr): 50,000, Control: MilliVolt, Finished Dimension: 16-1/2”W x 68”H x 6-1/2”D, Fan Kit Model: WFF81, Fan Kit Weight: 10 lbs. Neutral Bone Baked Enamel Finish -, resists fading and cleans easily with a damp cloth., Resettable Blocked Flue Safety Device -, automatically shuts the unit off in the event of flue blockage or incorrect vent installation., Unibody Grill Construction -, of heavy gauge steel eliminates heat warpage., Self Energizing Controls -, provide their own power, eliminating heat loss even during a power failure., 430 Stainless Steel, Ported Burner -, provides quiet ignition and extinction and excellent flame characteristics for Natural and L.P. gas., Low BTU Pilot -, is durably constructed of stainless steel and provides maximum efficiency during standby., Continuous Seam Welded Combustion Chamber -, constructed of heavy gauge steel, maximizes heat transfer and is warranted for ten (10) years., Optional Thermostatically Controlled Fan -, is available for single and dual wallfurnaces to enhance air circulation and eliminate air stratification., Wall Thermostat Standard -, Built-in Bulb Stat control optional.
Model: 90N50A, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Height: 29-1/4”, Weight (Lbs): 126, Vent Size: 4”, Gas Type: Natural, Input (Btu/hr): 50,000, Control: MilliVolt, Width and Length: 22” x 32”, Overall Grille Size: 24” x 34”, Size of Floor Opening: 22-1/2” x 32 -1/2”, Gas Pipe Size at Furnace: 1/2”, Floor to Center Line of Vent: 22” Narrow Width 30,000 BTU Model, Install between standard 16 center joist without cutting the joist., Continuous Seam Welded Combustion Chamber, Constructed of heavy 18 gauge steel maximizes heat transfer. Inner Jacket is suspended with U type interlocking brackets and is easily removed for cleaning., Jet Tube Burners are durably constructed of aluminized steel and provide excellent flame characteristics for natural gas. Slotted-port design eliminates ignition and extinction noise., 100% Safety Pilot/Built-in Pressure Regulator completely stops the flow of gas in the event pilot flame is extinguished. Built-in pressure regulator protects against line pressure surge., Low BTU Pilot is durably constructed of stainless and provides maximum efficiency during standby., Safety Limit Control maintains the lowest possible grill temperature consistent with heating required. Also cycles unit off in the event grill is blocked by a rug or furniture., Wall Thermostat is standing on all models and provides maximum comfort and ease of operation. Pyrex Vision Cap provides quick, safe visual check of burner and pilot operation.
Model: VC501B, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: Black, Type: Closed Front, Width: 30", Depth: 19-1⁄4", Height: 26", Weight (Lbs): 105, Vent Size: 4", Approx Shipping Weight: 105 lbs., Gas Type: Natural, Input (Btu/hr): 50,000, Control: Thermostat Bulb, Gas Inlet/Outlet Size: 1⁄2"- 3⁄8", Center of Vent to Floor: 21-3⁄4" Top Control provides no-stoop access for temperature selection, Unit Leveling Legs facilitate installation and compensate for uneven flooring., Thermostat Sensing Bulb monitors room temperature and maintains heat at desired setting., 100% Safety Pilot/Built-in Pressure Regulator cycles unit off in the event pilot flame is extinguished. Pressure regulator assures constant gas line pressure., Multi-Louvered Top directs warm air toward room. Assures maximum heat distribution., Continuous-Seam Welded, Combustion Chamber is durably constructed and assures maximum, rapid heat transfer. Warranted for 10 years (non pro-rated)., Matchless Spark Ignition eliminates the need for matches or lighting tools, Resettable Vent Spill Safety Device automatically shuts unit off in the event of flue blockage or incorrect vent installation.
Model: CF553D, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Amps: 2.25, Shipping Weight: 107 lbs, Blower Speed: 2, BTUH Input/Hr: 55000, CFM: 440, Dimensions WxHxD (in): 14-5/16 x 87-5/16 x 10-1/4, Gas Inlet: 1/2", Type Control: 24 Volts, Type Gas: Nat., Vent Size (Oval): 4" Wall Thermostat, Standing Pilot (Low BTU) or Intermittent Ignition Device, Aluminized, Continuous Seam-Welded Combustion Chamber, Resettable Blocked Flue Safety Device, Thermostatically Controlled Blower, Manual Spark Igniter, Multi-Port Stainless Steel Burner, Optional Side Outlet Kits, Mounts Quickly and Easily Between Wall Studs, Optional Cabinet Trim Kit
RADIANT TUBE HEATERS.jpg60,000 BTU
Locke Part #: L5670MFG Part #: JS-S060-AN Compare
Capacity: 60,000 BTU
RADIANT TUBE HEATERS.jpg60,000 BTU
Locke Part #: L5685MFG Part #: JS-0557-XX Compare
Model: 90N65A, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Height: 29-7/8”, Weight (Lbs): 152, Vent Size: 5”, Gas Type: Natural, Input (Btu/hr): 62,000, Control: MilliVolt, Width and Length: 24” x 38”, Overall Grille Size: 26” x 40”, Size of Floor Opening: 24-1/2” x 38-1/2”, Gas Pipe Size at Furnace: 1/2”, Floor to Center Line of Vent: 22” Narrow Width 30,000 BTU Model, Install between standard 16 center joist without cutting the joist., Continuous Seam Welded Combustion Chamber, Constructed of heavy 18 gauge steel maximizes heat transfer. Inner Jacket is suspended with U type interlocking brackets and is easily removed for cleaning., Jet Tube Burners are durably constructed of aluminized steel and provide excellent flame characteristics for natural gas. Slotted-port design eliminates ignition and extinction noise., 100% Safety Pilot/Built-in Pressure Regulator completely stops the flow of gas in the event pilot flame is extinguished. Built-in pressure regulator protects against line pressure surge., Low BTU Pilot is durably constructed of stainless and provides maximum efficiency during standby., Safety Limit Control maintains the lowest possible grill temperature consistent with heating required. Also cycles unit off in the event grill is blocked by a rug or furniture., Wall Thermostat is standing on all models and provides maximum comfort and ease of operation. Pyrex Vision Cap provides quick, safe visual check of burner and pilot operation.
L5690.jpg71,500 BTU
Locke Part #: L5669MFG Part #: EC-0075-LP Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
L5690.jpg71,500 BTU
Locke Part #: L5692MFG Part #: EC-0075-NG Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented
Product Image Not Available72111 FAN BLADE FOR CF HEATERS
Locke Part #: L0435MFG Part #: 72111 Compare
FSAN30.jpg75,000 BTU Low Profile Unit Heater
Locke Part #: L6297MFG Part #: FSAN75 Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 17.0 x 25.0 x 18.5, Nominal Gas Heat Input: 75,000, Flue Size Round (in): 4, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 4.1, Motor RPMs: 1050, Air Volume (CFM): 950 Residential low profile units, Self-diagnostic board with LED display improves troubleshooting., Sidewall venting eliminates roof penetrations., Wiring junction box is located inside of unit., 1 clearance from ceiling for easy installation., Heating capacities from 30,000 75,000 BTUH., Up to 81% thermal efficiency, Direct drive propeller fans are dynamically balanced for quiet and smooth operation, Power exhaust system allows horizontal venting to 25 ft., Tubular heat exchangers made of aluminized steel., Aluminized steel in shot burners provide efficient trouble free operation, Great for garages & shops.
Product Image Not Available767113 BURNER FOR SEP UNIT HTR SS FROM 17J58
Locke Part #: L6253MFG Part #: 17J58 Compare
Product Image Not Available767391 FAN BLADE F/CUHN45 SS FROM 27K60
Locke Part #: L6277MFG Part #: 1767391 Compare
Product Image Not Available767773 PRESSUR SWITCH F/-1 SS FROM 33J81
Locke Part #: L6237MFG Part #: 76777300 Compare
Product Image Not Available76777400 PRS SWTCH CUHN SS F/27K63 & 767394
Locke Part #: L6273MFG Part #: 767774 Compare
RADIANT TUBE HEATERS.jpg80,000 BTU
Locke Part #: L5686MFG Part #: JS-0559-XX Compare
Product Image Not Available80099 VENT SAFETY SWITCH VC701R 60TV15 L270
Locke Part #: L0273MFG Part #: 80099 Compare
Product Image Not Available80180 BULB CNTRL SWITCH COTHERM DEXEN VALVE
Locke Part #: L0268MFG Part #: 80180 Compare
RADIANT TUBE HEATERS.jpg90Deg. ELL & Reflector Kit
Locke Part #: L5675MFG Part #: JS-0508-JZ Compare
Model: WFF81-C, Warranty: 1 Year Parts, No Labor, Color: White, Weight (Lbs): 10 WFF81-C Fan Kit Includes:, Part Description, Part No., Fan Cabinet, 40304, Junction Box, 40315, Motor Mounting Brk., 40313, Motor, 85110, Fan Blade, 85115, Heyco Strain Relief, 84155, Fan Switch, 84170, Wiring Diagram (label), 91147, Fan Housing, 40311, Fan Switch Wire, 84171, Wall Mtg. Bracket, 40317, Installation Manual, 84511
Model: CHB3, Warranty: 1 Year Parts, No Labor, Weight (Lbs): 6, Volt: 115
Used With: CF353C-H, CF503C-H, CF653C-H, CF354C-H, CF504C-H, CF654C-H
Product Image Not AvailableAuxiliary Limit Switch for 230-400
Locke Part #: L6235MFG Part #: 767171 Compare
Used With: CF353C-H, CF354C-H, CF357C-H, CF358C-H
Used With: CF557C-H, CF558C-H, CF503C-H, CF504C-H, CF653C-H, CF654C-H
Product Image Not AvailableBlower, Auto Fits SR-18T
Locke Part #: L3115MFG Part #: SRB18T Compare
Gas: (Optional)
Product Image Not AvailableBlower, Auto Fits SR-30T
Locke Part #: L3117MFG Part #: SRB30T Compare
Gas: (Optional)
Product Image Not AvailableBlower, Fits SR-18
Locke Part #: L3114MFG Part #: SRB18 Compare
Model: DVB3, Warranty: 1 Year Parts, No Labor, Weight (Lbs): 4 Thermostatically Controlled Blower, Installs in minutes inside the cabinet and is prewired to simplify installation, Requires 115 VAC. 81 CFM
Gas: Natural
Gas: LPG
Gas: LPG
Gas: Natural
Gas: Natural
Gas: LPG
Product Image Not AvailableBox #8 Hanging Chain
Locke Part #: L5680MFG Part #: JL-0798-JC Compare
Model: BBSK, Warranty: 1 Year Parts, No Labor, Weight (Lbs): 1, Switch Action: Open on Rise, Used With: 1RD25 thru 1RD30 Heaters, Switch Type: SPST, Number Of Switches: 1, Contact Rating Resistive @ 120V (A): At 120/230 Vac: 125 VA pilot duty. Space Heater Accessory Thermostat Kit, Tested (US) to ANSI Z21.86 and (Canada) CSA 2.32, Coverts Wall Mount Thermostat Units 3E588,3E589,3E592,3E593,4YY32,4YY33, to Unit Mount T-stat Operation, Includes-, Operation Knob, Remote Built-in Stat and Thermostat Decal for Casing Top
Product Image Not AvailableBurner
Locke Part #: L3183MFG Part #: R2331 Compare
Product Image Not AvailableBurner
Locke Part #: L3184MFG Part #: R2330 Compare
Product Image Not AvailableBurner
Locke Part #: L3185MFG Part #: R2329 Compare
Capacity: 80,000 Btuh, Fuel: N.G, Line Voltage: 120VAC, Tube Length: 20’, 30’, 40’
Used With: 90N30A, 90N50A
Used With: 90N65A, 90N75A
P1598.jpgCeiling Heater 1250W 120V
Locke Part #: P1598MFG Part #: 157 Compare
Provides even heat from a unit that, extends only 2-1/2" from the ceiling., Anodized aluminum construction, Attractive, satin-finish aluminum "slimline" grille, Chrome alloy, wire element, provides instant heat, Built-in fan disperses heat evenly, Automatic overheat protection, Lifetime lubricated motor, Simple, quick surface installation, Mounts easily to any standard 3-1/4", 3-1/2", or 4" ceiling electrical box., Volts, Watts, Amps, BTU, Color, 120, 1250, 11, 4266, Satin Aluminum
Fan forced wall heaters, perfect for the bathroom or other areas., Attractive grille styling and color options available, Heavy duty steel grille and steel heater fan housing, Built-in, snap-action thermostat automatically maintains desired temperature., 4 wattage/voltage options available
Product Image Not AvailableControl For BBSK Bulb Thermostat
Locke Part #: L1099MFG Part #: 47925 Compare
Product Image Not AvailableControl Knob
Locke Part #: L1108MFG Part #: R2328 Compare
Product Image Not AvailableControl Knob
Locke Part #: L1109MFG Part #: R2324 Compare
Product Image Not AvailableControl Knob Assy
Locke Part #: L3586MFG Part #: MB16001 Compare
Product Image Not AvailableControl Knob Assy
Locke Part #: L3587MFG Part #: MB16002 Compare
Product Image Not AvailableControl Valve Assy
Locke Part #: L3583MFG Part #: NV202014 Compare
Product Image Not AvailableControl Valve Assy
Locke Part #: L3580MFG Part #: NV202012 Compare
Product Image Not AvailableControl Valve Assy
Locke Part #: L3581MFG Part #: NV202013 Compare
Amps: 1.95, Shipping Weight: 130 lbs, Blower Speed: 1, BTUH Input/Hr: 40000, CFM: 320, Dimensions WxHxD (in): 14-5/16 x 78-5/8 x 11-3/4, Gas Inlet: 1/2", Type Control: 24 Volts, Type Gas: Nat. Wall Thermostat, Standing Pilot (Low BTU) or Intermittent Ignition Device, Aluminized, Continuous Seam-Welded Combustion Chamber, Resettable Blocked Flue Safety Device, Thermostatically Controlled Blower, Manual Spark Igniter, Multi-Port Stainless Steel Burner, Optional Side Outlet Kits, Mounts Quickly and Easily Between Wall Studs, Optional Cabinet Trim Kit
Product Image Not AvailableECO-SCHWANK REPLACEMENT CERAMIC TILE
Locke Part #: L6580MFG Part #: JO-0370-CX Compare
Product Image Not AvailableECO-X GAS VALVE NATURAL GAS
Locke Part #: L6583MFG Part #: JL-0701-XX Compare
Product Image Not AvailableElectrode and Wire
Locke Part #: L1026MFG Part #: FF250 Compare
Fits with: FF3588-1, -2
Product Image Not AvailableFan Blade for SEP60 and 90 Unit Heaters
Locke Part #: L6232MFG Part #: 60905 Compare
Product Image Not AvailableFan Control with Bracket
Locke Part #: L0594MFG Part #: R2246 Compare
Includes:, motor, housing, & blower wheel
78111.jpgFan Motor For Counter Flow Wall Furnace
Locke Part #: L0840MFG Part #: 78111 Compare
Used With: CF503C-H, CF504C-H, CF653C-H, CF654C-H, CF557C-H, CF558C-H
Product Image Not AvailableFan Switch 130-degree
Locke Part #: L3148MFG Part #: R8117 Compare
78067.jpgFan Switch For Counter Flow Wall Furnace
Locke Part #: L0845MFG Part #: 78067 Compare
Used With: CF353C-H, CF354C-H, CF503C-H, CF504C-H, CF653C-H, CF654C-H, CF357C-H, CF358C-H, CF557C-H, CF558C-H
Product Image Not AvailableFENWALL 35-50 DSI CONTROL KIT REPL/S87C
Locke Part #: L6582MFG Part #: JP-2573-EK Compare
Product Image Not AvailableFENWALL 35-60 DSI CONTROL F/ECO SCHWANK
Locke Part #: L6581MFG Part #: JP-2573-FW Compare
Product Image Not AvailableFENWALL DSI CONTROL 3-TRIAL 24V W/BLOW RELAY
Locke Part #: L6575MFG Part #: JA-0567-XX Compare
Weight (Lbs): 7.50, Pack: 1 Heavy gauge woodgrain finished steel floor mats with fiber lining protects flooring (carpet, hardwood, linoleum) from fading due to continuous heat exposure
Weight (Lbs): 10.75, Pack: 1 Heavy gauge woodgrain finished steel floor mats with fiber lining protects flooring (carpet, hardwood, linoleum) from fading due to continuous heat exposure
Weight (Lbs): 11.00, Pack: 1 Heavy gauge woodgrain finished steel floor mats with fiber lining protects flooring (carpet, hardwood, linoleum) from fading due to continuous heat exposure
10-760.jpgFlame Sensor for FSA and SEP Unit Heaters
Locke Part #: L6215MFG Part #: 767150 Compare
Sensor has a high temperature Kanthol sensor rod that will withstand 1800 F. it has 30 of Teflon insulated lead wire with a 482 F rating and a 1/4" quick connect terminal., Sensor rod is 4" long, can be cut and bent to match original unit.
Product Image Not AvailableFlue Adapter for SEP345 - 400 Unit Heater
Locke Part #: L6710MFG Part #: 7678700 Compare
Used With: CF353C-H, CF503C-H, CF653C-H, CF354C-H, CF504C-H, CF654C-H
Used With: CF353C-H, CF503C-H, CF653C-H, CF354C-H, CF504C-H, CF654C-H
Used With: CF357C-H, CF358C-H, CF557C-H, CF558C-H
Used With: W251E/F, W351E/F, W501E/F
Used With: W255E/F, W355E/F, W505E/F
Used With: W256E/F, W356E/F, W506E/F
767146.jpgGas Valve for SEP230 - 400 Unit Heaters
Locke Part #: L6212MFG Part #: 767148 Compare
Product Image Not AvailableGas Valve-SIT
Locke Part #: L0890MFG Part #: R6563 Compare
Fits with: SR-10T, SR-18T, SR-30T; BF-10, BF-20, BF-30
Weight (Lbs): 24 Free Standing Kit (W25/W35 only) Includes:, Part Description, Part, No., Floor Plate Assembly, 40405, Right Side Assembly, 40410, Upper Left Side, 40415, Upper Right Side, 40416, Upper Front, 40418, Left Side Assembly, 40422
Type: AUX. Limit (Manual Reset) All CF’s “A”, Temperature Setting: L260°
Product Image Not AvailableIGINTER F/ECO SCHWANK
Locke Part #: L6584MFG Part #: JX-0204-SC Compare
Product Image Not AvailableIgniter Wire
Locke Part #: L3173MFG Part #: R5008 Compare
Product Image Not AvailableIgniter Wire
Locke Part #: L3174MFG Part #: R2390 Compare
100000240.jpgIgnition Control Board for SEP60 - 145 Unit Heaters
Locke Part #: L6213MFG Part #: 100000240 Compare
76777500.jpgIgnition Control Board SEP-5
Locke Part #: L6279MFG Part #: 76722700 Compare
Control Board for CUH30 - 45 (5), 60 - 75 (2); FSA30 - 75; SEP60 - 90 (5), 100, 115 - 145 (5), 175 (5), 200 (3), 230 (5), 250, 290 (5), 300, 345 (6), 400 (4); FOA45 - 400 Unit Heaters
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
Includes:, motor, housing, & blower wheel
Product Image Not AvailableJE-1520-XX REPLACMENT BULB F/IEP1520
Locke Part #: L6589MFG Part #: JE-1520-XX Compare
Product Image Not AvailableJS-0565-XX PROPANE CONVERSION KIT F/155K
Locke Part #: L6593MFG Part #: JS-0565-XX Compare
Product Image Not AvailableJS-0567-AS PROPANE CONVERSION KIT F/175K
Locke Part #: L6594MFG Part #: JS-0567-AS Compare
Product Image Not AvailableJS-0567-CS PROPANE CONVERSION KIT F/200K
Locke Part #: L6595MFG Part #: JS-0567-CS Compare
Product Image Not AvailableJS-S155-AN 150K BTU N.G. STS-JZ BURNER KIT
Locke Part #: L6590MFG Part #: JS-S155-AN Compare
Product Image Not AvailableJS-S175-AN 175K BTU N.G. STS-JZ BURNER KIT
Locke Part #: L6591MFG Part #: JS-S175-AN Compare
Product Image Not AvailableJS-S200-AN 200K BTU N.G. STS-JZ BURNER KIT
Locke Part #: L6592MFG Part #: JS-S200-AN Compare
P8076.jpgKickspace Heater
Locke Part #: P8076MFG Part #: 112 Compare
Weight (Lbs): 1, Used With: 90N50A
Weight (Lbs): 1, Used With: 90N65A
Used With: 90N50A
Product Image Not AvailableLimit Controls for SEP 145
Locke Part #: L6219MFG Part #: 100000535 Compare
Product Image Not AvailableLimit Switch
Locke Part #: L0949MFG Part #: R480 Compare
Product Image Not AvailableLimit Switch - Primary 210-degree
Locke Part #: L3170MFG Part #: R1821 Compare
Product Image Not AvailableLimit Switch - Register 160-degree
Locke Part #: L3171MFG Part #: R1822 Compare
78065.jpgLimit Switch For Counter Flow Wall Furnace
Locke Part #: L0844MFG Part #: 78065 Compare
Used With: CF353C-H, CF354C-H, CF503C-H, CF504C-H, CF653C-H, CF654C-H, CF357C-H, CF358C-H, CF557C-H, CF558C-H
Product Image Not AvailableLimit Switch for SEP175 (2-5); FOA250 Unit Heaters
Locke Part #: L6247MFG Part #: 76716500 Compare
165295202.jpgLiquid Propane Kit for All CUH and FSA Unit Heaters
Locke Part #: L6242MFG Part #: 165295204 Compare
165295202.jpgLiquid Propane Kit for SEP100 Unit Heater
Locke Part #: L6705MFG Part #: 65296401 Compare
165295202.jpgLiquid Propane Kit for SEP200 Unit Heater
Locke Part #: L6250MFG Part #: LB69845R Compare
165295202.jpgLiquid Propane Kit for SEP400 Unit Heater
Locke Part #: L6251MFG Part #: LB69845S Compare
L5674.jpgLP Kit
Locke Part #: L5684MFG Part #: JS-0555-XA Compare
Minimal heat loss when doors are open: heats people and objects, not air Compact 10 ft total length design, Factory assembled burner to tube Installs directly from carton Includes: 24 volt thermostat, Hanging Chain,, Suspension Hooks
Product Image Not AvailableLP Kit For VC201A-D Vented Console Heater
Locke Part #: L1156MFG Part #: 49722 Kit to VC202B-D Compare
Product Image Not AvailableLP Kit For VC201A-D Vented Console Heater
Locke Part #: L1169MFG Part #: 49727 Kit to VC352B-D Compare
Product Image Not AvailableLP Kit For VC201A-D Vented Console Heater
Locke Part #: L1173MFG Part #: 49732 Kit to VC502B-D Compare
Product Image Not AvailableLP Kit For VC501A-H Vented Console Heater
Locke Part #: L1127MFG Part #: 49730 Compare
Product Image Not AvailableMillivolt, Standing Pilot, Piezo, 32.5K BTU
Locke Part #: L0994MFG Part #: 3588X-NAT Compare
Height: 23-1/2", Input BTU: 32,500, Floor Opening, Length & Width: 32-5/16" x 20-5/16", Temperature Control Millivolt Wall Therm.: Yes AUTOMATIC IGNITION! NO MATCHES NEEDED! ""PUSH-BUTTON"" ON-OFF LIGHTER!
Product Image Not AvailableMillivolt, Standing Pilot, Piezo, 45K BTU
Locke Part #: L0969MFG Part #: 5088XNAT Compare
Height: 25-3/4", Input BTU: 45,000, Floor Opening, Length & Width: 34-5/16" x 22-5/16", Temperature Control Millivolt Wall Therm.: Yes AUTOMATIC IGNITION! NO MATCHES NEEDED! ""PUSH-BUTTON"" ON-OFF LIGHTER!
Product Image Not AvailableMillivolt, Standing Pilot, Piezo, 65K BTU
Locke Part #: L0971MFG Part #: 7088XNAT Compare
Product Image Not AvailablePiezo Igniter
Locke Part #: L3124MFG Part #: R2313 Compare
Product Image Not AvailablePiezo Igniter
Locke Part #: L3588MFG Part #: ML08303 Compare
Product Image Not AvailablePiezo Ignitor
Locke Part #: L1025MFG Part #: R854 Compare
R6307.jpgPilot/Thermocouple LP (for SR-2 & SR10T-2)
Locke Part #: L3175MFG Part #: R6308 Compare
Product Image Not AvailablePilot Assy (LP)
Locke Part #: L3138MFG Part #: R2360 Compare
Product Image Not AvailablePilot Assy (LP) Includes R-6309 & R-6310
Locke Part #: L0893MFG Part #: R6308 Compare
Fits with: SR-6-3, SR-10-3; SR-10T, SR-18T, SR-30T; BF-10, BF-20, BF-30
Product Image Not AvailablePilot Assy (NAT)
Locke Part #: L3140MFG Part #: R2356 Compare
Product Image Not AvailablePilot Assy (NAT)
Locke Part #: L3141MFG Part #: R2355 Compare
Product Image Not AvailablePilot Assy (NAT) Includes R-6309 & R-6310
Locke Part #: L0888MFG Part #: R6307 Compare
Fits with: SR-6-3, SR-10-3; SR-10T, SR-18T, SR-30T; BF-10, BF-20, BF-30
Product Image Not AvailablePilot Thermocouple
Locke Part #: L3190MFG Part #: R6310 Compare
Fits with: SR-6-3, SR-10-3, SR-10T, SR-18T, SR-30T
R6307.jpgPilot with Orifice for SR6-SR30T Natural
Locke Part #: L3139MFG Part #: 762143 Compare
P8077.jpgPortable Electric Heater
Locke Part #: P8077MFG Part #: 6201 Compare
Instant, automatic safety shut-off if tipped, Overheat protection shuts off the heater and activates the caution light, Efficient, ceramic heating elements, 1500 or 1200 watt settings, Built-in thermostat, 6' cord with safety flanged plug, Compact 5 7/8" x 6" x 5 1/4"
Product Image Not AvailablePressure Regulator
Locke Part #: L6619MFG Part #: NRV81FI6 Compare
100000241.jpgPressure Switch for SEP145 (4,5) Unit Heaters
Locke Part #: L6224MFG Part #: 1767772 Compare
Used With: W251/2E/F, W351/2E/F, W501/2E/F
Used With: W255/6E/F,W355/6E/F,W505/6E/F
SR6-SR10-SR10T.jpgRadiant Heater, manual control, 10,000 Btu, LP
Locke Part #: L3552MFG Part #: HR10ML Compare
SR6-SR10-SR10T.jpgRadiant Heater, manual control, 10,000 Btu, Nat
Locke Part #: L3553MFG Part #: HR10MN Compare
Product Image Not AvailableRadiant Heater, manual control, 15,000 Btu, LP
Locke Part #: L3556MFG Part #: HR15ML Compare
SR18-SR18T.jpgRadiant Heater, manual control, 18,000 Btu, Nat
Locke Part #: L3557MFG Part #: HR18MN Compare
Product Image Not AvailableRadiant Heater, manual control, 25,000 Btu, LP
Locke Part #: L3560MFG Part #: HR25ML Compare
SR30-SR30T.jpgRadiant Heater, manual control, 30,000 Btu, Nat
Locke Part #: L3561MFG Part #: HR30MN Compare
SR6-SR10-SR10T.jpgRadiant Heater, manual control, 6,000 Btu, LP
Locke Part #: L3550MFG Part #: HR06ML Compare
SR6-SR10-SR10T.jpgRadiant Heater, manual control, 6,000 Btu, Nat
Locke Part #: L3551MFG Part #: HR06MN Compare
SR6-SR10-SR10T.jpgRadiant Heater, Thermostat, 10,000 Btu, LP
Locke Part #: L3554MFG Part #: HR10TL Compare
SR6-SR10-SR10T.jpgRadiant Heater, Thermostat, 10,000 Btu, Nat
Locke Part #: L3555MFG Part #: HR10TN Compare
Product Image Not AvailableRadiant Heater, Thermostat, 15,000 Btu, LP
Locke Part #: L3558MFG Part #: HR15TL Compare
SR18-SR18T.jpgRadiant Heater, Thermostat, 18,000 Btu, Nat
Locke Part #: L3559MFG Part #: HR18TN Compare
Product Image Not AvailableRadiant Heater, Thermostat, 25,000 Btu, LP
Locke Part #: L3562MFG Part #: HR25TL Compare
SR30-SR30T.jpgRadiant Heater, Thermostat, 30,000 Btu, Nat
Locke Part #: L3563MFG Part #: HR30TN Compare
Includes:, Part Description, Part No., Side / Rear Register, 31630, Large Outer Boot, 31580, Large Inner Boot, 31560, Plaster Ground, 31595, Damper Assembly, 31675
Model: 40542-A, Warranty: 1 Year Parts, No Labor, Color: White, Weight (Lbs): 5
Product Image Not AvailableRegulator Inlet (LP) 10.0
Locke Part #: L3181MFG Part #: R2480 Compare
L5689.jpgReplacement Bulb For The IEP1524
Locke Part #: L5679MFG Part #: JE-1524-XX Compare
Short-wave infrared technology provides instant comfort heat., Restaurant/hotel patios, Sports venues, Balcony/terrace, Hobby shops, Garage/workshop, Warehouse facilities Indoor/Outdoor, 120v,1,500w, 5.6"w x 5.7"h x 4.4"d 5lb.
Used With: 90N30A, 90N50A, 90N65A, 90N75A
Product Image Not AvailableSCHWANK 4" TORCITE COUPLER F/TUBE HEATERS
Locke Part #: L6577MFG Part #: JA-0516-SW Compare
Product Image Not AvailableSCHWANK BLOWER ASSEMBLY 1/20HP F/200K
Locke Part #: L6571MFG Part #: JS-0579-ZK Compare
Product Image Not AvailableSCHWANK BLOWER ASSEMBLY 1/35HP F/45-175K BTU
Locke Part #: L6570MFG Part #: JS-0579-AK Compare
Product Image Not AvailableSCHWANK GAS VALVE 10"WC 24V VR8 LP F/45-155KBTU
Locke Part #: L6573MFG Part #: JL-0703-AA Compare
Product Image Not AvailableSCHWANK GAS VALVE 3.5"WC 24V VR8 NG F/45-155KBTU
Locke Part #: L6572MFG Part #: JL-0701-AA Compare
Product Image Not AvailableSCHWANK IGNITER/GASKET KIT F/DSI TUBE HEATER
Locke Part #: L6576MFG Part #: JA-0571-KT Compare
Product Image Not AvailableSpark Ignitor for SEP All Sizes Unit Heaters
Locke Part #: L6214MFG Part #: 767149 Compare
78066.jpgSpeed Switch For Counter Flow Wall Furnace
Locke Part #: L0846MFG Part #: 78066 Compare
Used With: CF557C-H, CF558C-H, CF503C-H, CF504C-H, CF653C-H, CF654C-H
Product Image Not AvailableStand, Fits SR-18, SR-18T
Locke Part #: L3119MFG Part #: SRS18 Compare
Gas: (Optional)
Product Image Not AvailableStand, Fits SR-30, SR-30T
Locke Part #: L3120MFG Part #: SRS30 Compare
Gas: (Optional)
Product Image Not AvailableThermocouple
Locke Part #: L3123MFG Part #: R1970 Compare
Product Image Not AvailableThermocouple
Locke Part #: L3125MFG Part #: R2373 Compare
Product Image Not AvailableThermocouple
Locke Part #: L3126MFG Part #: R2372 Compare
Product Image Not AvailableThermocouple
Locke Part #: L3127MFG Part #: R2371 Compare
Product Image Not AvailableThermocouple
Locke Part #: L3186MFG Part #: R2256 Compare
Product Image Not AvailableThermocouple
Locke Part #: L3567MFG Part #: ND08034 Compare
Product Image Not AvailableThermocouple
Locke Part #: L3568MFG Part #: ND08036 Compare
Product Image Not AvailableThermocouple
Locke Part #: L3569MFG Part #: ND08038 Compare
Product Image Not AvailableThermostat Valve Assy
Locke Part #: L3582MFG Part #: SIT544000 Compare
Product Image Not AvailableThermostat Valve Assy
Locke Part #: L3584MFG Part #: SIT545000 Compare
Product Image Not AvailableTransformer/ Relay to 24V
Locke Part #: L5683MFG Part #: JM-0300-AA Compare
Product Image Not AvailableTRANSFORMER 120/24V 20VA AT120B1026
Locke Part #: L6574MFG Part #: JA-0775-XX Compare
78069.jpgTransformer For Counter Flow Wall Furnace
Locke Part #: L0851MFG Part #: 78069 Compare
Used With: CF353C-H, CF354C-H, CF503C-H, CF504C-H, CF653C-H, CF654C-H, CF357C-H, CF358C-H, CF557C-H, CF558C-H
L5682.jpgTruTemp Radiant Set-Back T-Stat
Locke Part #: L5682MFG Part #: JM-0150-XX Compare
Cuts energy use by up to 15%., Low price, high performance with extra features., Automatically senses if building is occupied - no need for cumbersome programming., A setback override switch provides the flexibility to handle many different conditions., Tamper resistant design (tools are required to make adjustments) ensures you control temperature setting., Mounts easily on standard 4" electrical box or directly to wall, Concealed setting graduated in both Fahrenheit and Celsius., 5 degrees Celsius setback built in to preserve heat reservoir when building is unoccupied and reduce energy use during morning reheat, Simple, but proven, design., Specifically designed for all Schwank heaters.
Product Image Not AvailableTS-0020-JZ 20' EMISSIVE COATED SECONDARY TUBE
Locke Part #: L6579MFG Part #: TS-0020-JZ Compare
Product Image Not AvailableTS-0030-JZ 30' EMISSIVE COATED SECONDARY TUBE
Locke Part #: L6585MFG Part #: TS-0030-JZ Compare
Product Image Not AvailableTS-0040-JZ 40' EMISSIVE COATED SECONDARY TUBE
Locke Part #: L6586MFG Part #: TS-0040-JZ Compare
Product Image Not AvailableTS-1010-JZ 10' EMISSIVE COATED SECONDARY TUBE
Locke Part #: L6578MFG Part #: TS-1010-JZ Compare
Product Image Not AvailableTS-1030-JZ 30' PRIMARY TUBE KIT F/175-200
Locke Part #: L6587MFG Part #: TS-1030-JZ Compare
Product Image Not AvailableTS-F030-JZ 30' PRIMARY TUBE KIT F/110-155K BTU
Locke Part #: L6588MFG Part #: TS-F030-JZ Compare
Product Image Not AvailableValve - Copreci
Locke Part #: L3136MFG Part #: R1649 Compare
Product Image Not AvailableValve - Copreci
Locke Part #: L3128MFG Part #: R2277 Compare
Fits with: SR-6-1 SR-10-1
Product Image Not AvailableValve - SIT
Locke Part #: L3129MFG Part #: R2351 Compare
Product Image Not AvailableVent Safety Switch
Locke Part #: L3172MFG Part #: R3045 Compare
Product Image Not AvailableVent Safety Switch 350-degree
Locke Part #: L0682MFG Part #: R1876 Compare
Used With: 90N30A, 90N50A, 90N65A, 90N75A