Loading ...

Loading ...

Search in: Zoning Category

10" Dia. Damper
Locke Part #: L3432 MFG Part #: 119010
18 gauge offset blade, Nylon bearings for smooth operation, 2-wire stall type 24 VAG motor, Direct coupled actuator Braeburn Systems
12" Dia. Damper
Locke Part #: L3433 MFG Part #: 119012
18 gauge offset blade, Nylon bearings for smooth operation, 2-wire stall type 24 VAG motor, Direct coupled actuator Braeburn Systems
Allied Air
Allied Air
6" Dia. Damper
Locke Part #: L3430 MFG Part #: 119006
18 gauge offset blade, Nylon bearings for smooth operation, 2-wire stall type 24 VAG motor, Direct coupled actuator Braeburn Systems
8" Dia. Damper
Locke Part #: L3431 MFG Part #: 119008
18 gauge offset blade, Nylon bearings for smooth operation, 2-wire stall type 24 VAG motor, Direct coupled actuator Braeburn Systems
Allied Air
Duct Size: 2, Includes: Zone Damper, Bypass Damper Built-in, Material: Sheet Metal Plenum, Dimensions: 3 ft L x 21 in W x 21 in H, Power: 24 VAC, 2.5 VA typical (4 VA max), Position Indicator: Configured on Shaft, Type: Horizontal Save installation space. No external dampers require no extra attic or crawl space. Also, no extra space required to service external dampers., Save installation time. Dampers come installed in the plenum. Install Comfort-PLENUM, then starting collars and start running duct to each zone., It's a good-looking job. Damper motors are mounted on the plenum. Red and green L.E.D.'s indicate each damper's position., ComfortPLENUM is a unique patent pending product that was designed by contractors to make zoning installations easier and faster., Also, in tight attics and crawl spaces, the plenum requires less space and less installation work to be performed in those tight spaces., ComfortPLENUM is a 21"  x 21"  rectangular plenum with 2"  duct liner inside built from 24 gauge sheet metal., Power open/power close motors, 18 inch/lbs torque, 30 second run time, 90 degree travel, Each motor includes LED's to indicate opening (green) and closing (red) movement when blinking. LED's are solid once motor is fully open or fully closed., Motors have two stop limits that allow the adjustment of a maximum open position and a minimum closed position., All dampers have a thermally insulated (made from 3/8"  gasket material) motor mounting plate that allows no air leakage outside the plenum., Plenums have been pressure tested up to 2 inches e.s.p., Each damper has a large decal called a " cutting guide"  on the outside that corresponds to the damper on the inside. This cutting guide shows the installer where to cut the hole for the starting collar., ComfortPLENUM dampers are gear driven opposed blade dampers with less than 10% bleed factor., Each plenum has approximately 10 inches of transition material on the equipment end of the plenum., ComfortPLENUM- can be rotated 90 or 180 to accommodate the application space requirements. Comfort Products
Power: 24VAC, 2.5 VA typical (4 VA max), Position Indicator: Configured on Shaft, Duct Size: 2, Includes: Zone Damper, Bypass Damper Built-in, Material: Sheet Metal, Dimensions: 5 ft L x 21 in W x 21 in H, Type: Horizontal Save installation space. No external dampers require no extra attic or crawl space. Also, no extra space required to service external dampers., Save installation time. Dampers come installed in the plenum. Install Comfort-PLENUM, then starting collars and start running duct to each zone., It's a good-looking job. Damper motors are mounted on the plenum. Red and green L.E.D.'s indicate each damper's position., ComfortPLENUM is a 21"  x 21"  rectangular plenum with 2"  duct liner inside built from 24 gauge sheet metal., Power open/power close motors, 18 inch/lbs torque, 30 second run time, 90 degree travel, Each motor includes LED's to indicate opening (green) and closing (red) movement when blinking. LED's are solid once motor is fully open or fully closed., Motors have two stop limits that allow the adjustment of a maximum open position and a minimum closed position., All dampers have a thermally insulated (made from 3/8"  gasket material) motor mounting plate that allows no air leakage outside the plenum., Plenums have been pressure tested up to 2 inches e.s.p., Each damper has a large decal called a " cutting guide"  on the outside that corresponds to the damper on the inside. This cutting guide shows the installer where to cut the hole for the starting collar., ComfortPLENUM dampers are gear driven opposed blade dampers with less than 10% bleed factor., Each plenum has approximately 10 inches of transition material on the equipment end of the plenum., ComfortPLENUM can be rotated 90 or 180 to accommodate the application space requirements. Comfort Products
Product Image Not Available DISCHARGE AIR TEMP SENSOR
Locke Part #: L3974 MFG Part #: 88K38
Allied Air
Size: 10, Air Flow Capacity: 700, Application: Air Quality The model CLBD Bypass Damper is an easy and economical way to manage system static pressure, in a zoned HVAC system, Damper adjustment is easily achieved by increasing or decreasing the force applied to the bypass damper blade, until the desired static pressure is achieved, Due to the constant load applied to the damper blade and the unique magnetic latch, the CLBD Bypass Damper can be installed in any position on your bypass duct-work, The CLBD minimizes bypass volume, while still preventing the HVAC system static pressure from rising above the selected Static Pressure set-point, The CLBD is a basic, cost effective Bypass Solution for Constant Speed or Variable Speed “zoned” HVAC systems EWC Controls
Air Flow Capacity: 1100, Application: Air Quality, Size: 12 The model CLBD Bypass Damper is an easy and economical way to manage system static pressure, in a zoned HVAC system, Damper adjustment is easily achieved by increasing or decreasing the force applied to the bypass damper blade, until the desired static pressure is achieved, Due to the constant load applied to the damper blade and the unique magnetic latch, the CLBD Bypass Damper can be installed in any position on your bypass duct-work, The CLBD minimizes bypass volume, while still preventing the HVAC system static pressure from rising above the selected Static Pressure set-point, The CLBD is a basic, cost effective Bypass Solution for Constant Speed or Variable Speed “zoned” HVAC systems EWC Controls
Air Flow Capacity: 1700, Application: Air Quality, Size: 14 The model CLBD Bypass Damper is an easy and economical way to manage system static pressure, in a zoned HVAC system, Damper adjustment is easily achieved by increasing or decreasing the force applied to the bypass damper blade, until the desired static pressure is achieved, Due to the constant load applied to the damper blade and the unique magnetic latch, the CLBD Bypass Damper can be installed in any position on your bypass duct-work, The CLBD minimizes bypass volume, while still preventing the HVAC system static pressure from rising above the selected Static Pressure set-point, The CLBD is a basic, cost effective Bypass Solution for Constant Speed or Variable Speed “zoned” HVAC systems EWC Controls
Diameter: 8, Length: 12, Bypass CFM: 400 The model CLBD Bypass Damper is an easy and economical way to manage system static pressure, in a zoned HVAC system, Damper adjustment is easily achieved by increasing or decreasing the force applied to the bypass damper blade, until the desired static pressure is achieved, Due to the constant load applied to the damper blade and the unique magnetic latch, the CLBD Bypass Damper can be installed in any position on your bypass duct-work, The CLBD minimizes bypass volume, while still preventing the HVAC system static pressure from rising above the selected Static Pressure set-point, The CLBD is a basic, cost effective Bypass Solution for Constant Speed or Variable Speed “zoned” HVAC systems EWC Controls
Weight: 4.2, Dimensions: 4 L x 2 W x 13 H, Country of Origin: USA, Amperage: 0.36, Phase: Single, Frequency: 60, Zone Capacity: 2-4, Number of Cooling Stages: 2, Number of Heating Stages: 4, Temperature Rating: -20 to 160, Color: Clear/Green, Housing Material: Plastic, Maximum Temperature: 145, Number of HVAC Zones: 4 The UZC4 Zone system features automatic changeover from any thermostat allowing for individual zone comfort from the HVAC system, The STATUS LED pulses as a steady heart beat to indicate active Microprocessor status, On board Multi-colored LED’s will illuminate to indicate system status, HVAC system mode, and active / inactive zone identification, Damper 1 thru Damper 20 green LEDs will indicate which zone dampers are demanded to energize Open or Closed, All modules operate on 24vac power supplied from a separate transformer, The processor has a built-in feature that monitors the processor performance and resets the system if an error occurs due to power failures or power interruptions, The UZC4 allows constant operation of the Indoor Fan by Thermostat #1 only, or by each individual thermostat, A dip switch is provided to enable automatic fan operation in heat mode EWC Controls
Pack Quantity: 1, Country of Origin: MX, Package Length: 8.5, Package Height: 10.125, Package Width: 13, Series: EARD, Size: 8 in Dia, Shape: Round, Voltage Rating: 24, Timing: 30 sec Power Closed/10 sec Spring Return, Temperature Rating: 40 to 140, Material: Steel, Finish: Galvanized, Domestic/Import: Import Single-blade damper, Shipped as power open/spring return closed damper, Quiet operation, Can be field-converted to power closed/spring return open damper, Blade closes off tightly against gasket for minimal leakage, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, 0 sec power closed/10 sec spring return, M1-power terminals M6 Common, M6 common terminal Honeywell 085267728270
Type: 2-Position, Voltage Rating: 24, Motor Type: Power Open, Spring Closed, Motor Timing: 30, Suitable For Use With: EARD Damper The M847D is a two position, 24 VAC spring return actuators designed to operate ARD, EARD and ZD zone dampers, Low voltage, spring return damper actuators, Equipped with anti-rotation and drive shaft extensions for direct mounting to 7 or 16 in diameter coupling style dampers, Adjustable range stops Honeywell
Type: 2-Position, Voltage Rating: 24, Motor Type: Power Closed, Spring Open, Motor Timing: 30, Suitable For Use With: ARD, ARDTZ, ZD, ZDTZ Damper The M847D is a two position, 24 VAC spring return actuators designed to operate ARD, EARD and ZD zone dampers, Low voltage, spring return damper actuators, Equipped with anti-rotation and drive shaft extensions for direct mounting to 7 or 16 in diameter coupling style dampers, Adjustable range stops, Direct replacement for M847D1004, 30 sec power open/10 sec spring return Honeywell 085267353069
Pack Quantity: 6, Country of Origin: MX, Package Weight: 2.65, Voltage Rating: 24, Stages: 2-Cool/3-Heat, Number of Zones: 4, Domestic/Import: Import Used with HZ432 TrueZONE panel to expands number of zones, Use multiple TAZ-4 control Panels to control up to 32 zones Honeywell 085267234009
Country of Origin: MX, Type: Single Blade, Series: ARD, Size: 10, Shape: Round, Voltage Rating: 24, Amperage Rating: 6, Rotation Angle: 90 deg, Timing: 30, Motor Type: Power Closed, Spring Open, Electrical Connection: M1-Power/M6-Common/M4 Terminal, Temperature Rating: 40 to 140, Material: Steel, Finish: Galvanized, Domestic/Import: Import Features galvanized steel with single blade damper, which closes off tightly against gasket for minimal leakage, Designated as power closed or spring return open damper for use with Honeywell zoning systems, Can be field-converted when used as an independent zone or for fresh air intake, Rated to operate up to 1 in WC, Available in 5 to 10 in, 12, 14, 16 and 18 in Dia, Adjustable close position range stops, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, Motor or actuators mounting - side or top, Fail-safe, normally open operation, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, 30 sec power closed/10 sec spring return Honeywell 085267461191
Country of Origin: MX, Type: Single Blade, Series: ARD, Size: 12, Shape: Round, Voltage Rating: 24, Amperage Rating: 6, Rotation Angle: 90 deg, Timing: 30, Motor Type: Power Closed, Reversible, Spring Open, Electrical Connection: 2-Wire, Temperature Rating: 40 to 140, Material: Steel, Finish: Galvanized, Domestic/Import: Import Features galvanized steel with single blade damper, which closes off tightly against gasket for minimal leakage, Designated as power closed or spring return open damper for use with Honeywell zoning systems, Can be field-converted when used as an independent zone or for fresh air intake, Rated to operate up to 1 in WC, Available in 5 to 10 in, 12, 14, 16 and 18 in Dia, Adjustable close position range stops, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, Motor or actuators mounting - side or top, Fail-safe, normally open operation, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, 30 sec power closed/10 sec spring return Honeywell 085267171786
Country of Origin: MX, Type: Single Blade, Series: ARD, Size: 14, Shape: Round, Voltage Rating: 24, Amperage Rating: 6, Rotation Angle: 90 deg, Timing: 30, Motor Type: Power Closed, Spring Open, Electrical Connection: M1-Power/M6-Common/M4 Terminal, Temperature Rating: 40 to 140, Material: Steel, Finish: Galvanized, Domestic/Import: Import Features galvanized steel with single blade damper, which closes off tightly against gasket for minimal leakage, Designated as power closed or spring return open damper for use with Honeywell zoning systems, Can be field-converted when used as an independent zone or for fresh air intake, Rated to operate up to 1 in WC, Available in 5 to 10 in, 12, 14, 16 and 18 in Dia, Adjustable close position range stops, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, Motor or actuators mounting - side or top, Fail-safe, normally open operation, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, 30 sec power closed/10 sec spring return Honeywell 085267502573
Country of Origin: MX, Type: Single Blade, Series: ARD, Size: 16, Shape: Round, Voltage Rating: 24, Amperage Rating: 6, Rotation Angle: 90 deg, Timing: 30, Motor Type: Power Closed, Spring Open, Electrical Connection: M1-Power/M6-Common/M4 Terminal, Temperature Rating: 40 to 140, Material: Steel, Finish: Galvanized, Domestic/Import: Import Features galvanized steel with single blade damper, which closes off tightly against gasket for minimal leakage, Designated as power closed or spring return open damper for use with Honeywell zoning systems, Can be field-converted when used as an independent zone or for fresh air intake, Rated to operate up to 1 in WC, Available in 5 to 10 in, 12, 14, 16 and 18 in Dia, Adjustable close position range stops, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, Motor or actuators mounting - side or top, Fail-safe, normally open operation, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, 30 sec power closed/10 sec spring return Honeywell 085267644846
Country of Origin: MX, Type: Single Blade, Series: ARD, Size: 6, Shape: Round, Voltage Rating: 24, Amperage Rating: 6, Rotation Angle: 90 deg, Timing: 30, Motor Type: Power Closed, Spring Open, Electrical Connection: M1-Power/M6-Common/M4 Terminal, Temperature Rating: 40 to 140, Material: Steel, Finish: Galvanized, Domestic/Import: Import Features galvanized steel with single blade damper, which closes off tightly against gasket for minimal leakage, Designated as power closed or spring return open damper for use with Honeywell zoning systems, Can be field-converted when used as an independent zone or for fresh air intake, Rated to operate up to 1 in WC, Available in 5 to 10 in, 12, 14, 16 and 18 in Dia, Adjustable close position range stops, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, Motor or actuators mounting - side or top, Fail-safe, normally open operation, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, 30 sec power closed/10 sec spring return Honeywell 085267919333
Country of Origin: MX, Type: Single Blade, Series: ARD, Size: 8, Shape: Round, Voltage Rating: 24, Amperage Rating: 6, Rotation Angle: 90 deg, Timing: 30, Motor Type: Power Closed, Spring Open, Electrical Connection: M1-Power/M6-Common/M4 Terminal, Temperature Rating: 40 to 140, Material: Steel, Finish: Galvanized, Domestic/Import: Import Features galvanized steel with single blade damper, which closes off tightly against gasket for minimal leakage, Designated as power closed or spring return open damper for use with Honeywell zoning systems, Can be field-converted when used as an independent zone or for fresh air intake, Rated to operate up to 1 in WC, Available in 5 to 10 in, 12, 14, 16 and 18 in Dia, Adjustable close position range stops, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, Motor or actuators mounting - side or top, Fail-safe, normally open operation, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, 30 sec power closed/10 sec spring return Honeywell 085267968621
Country of Origin: MX, Type: Constant Pressure, Series: CPRD, Size: 10, Shape: Round, Motor Type: Calibrated Spring Tension Regulator, Temperature Rating: 0 to 165, Material: Steel, Finish: Galvanized, Domestic/Import: Import Quick installation and setup, No weight to adjusts, Can be installed in any orientation, Engineered to provide constant system pressure regardless of changes in zones celling or blower speed, Bypass up to 1000 cfm, Motor or actuators mounting - quick connect regulator Honeywell 085267992169
Country of Origin: MX, Type: Constant Pressure, Series: CPRD, Size: 12, Shape: Round, Motor Type: Calibrated Spring Tension Regulator, Temperature Rating: 0 to 165, Material: Steel, Finish: Galvanized, Domestic/Import: Import Quick installation and setup, No weight to adjusts, Can be installed in any orientation, Engineered to provide constant system pressure regardless of changes in zones celling or blower speed, Bypass up to 1400 cfm, Motor or actuators mounting - quick connect regulator Honeywell 085267138819
Country of Origin: MX, Type: Constant Pressure, Series: CPRD, Size: 14, Shape: Round, Motor Type: Calibrated Spring Tension Regulator, Temperature Rating: 0 to 165, Material: Steel, Finish: Galvanized, Domestic/Import: Import Quick installation and setup, No weight to adjusts, Can be installed in any orientation, Engineered to provide constant system pressure regardless of changes in zones celling or blower speed, Bypass up to 1400 cfm, Motor or actuators mounting - quick connect regulator Honeywell 085267173865
Country of Origin: MX, Type: Constant Pressure, Series: CPRD, Size: 8, Shape: Round, Motor Type: Calibrated Spring Tension Regulator, Temperature Rating: 0 to 165, Material: Steel, Finish: Galvanized, Domestic/Import: Import Quick installation and setup, No weight to adjusts, Can be installed in any orientation, Engineered to provide constant system pressure regardless of changes in zones celling or blower speed, Bypass up to 600 cfm, Motor or actuators mounting - quick connect regulator Honeywell 085267106733
Type: Single Blade, Series: EARD, Size: 6, Shape: Round, Voltage Rating: 24, Timing: 30, Motor Type: Power Open, Spring Closed, Electrical Connection: M1-Power/M6-Common Terminal, Temperature Rating: 0 to 165, Material: Steel, Finish: Galvanized Adjustable damper position range stops, Single blade damper, Shipped as power open or spring return closed damper, Quiet operation, Can be field-converted to power closed or spring return open damper, Blade closes off tightly against gasket for minimal leakage, Male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct, Motor or actuators mounting - side or top, 30 sec power closed/10 sec spring return Honeywell 085267690423
Pack Quantity: 1, Country of Origin: MX, Package Weight: 4.745, Voltage Rating: 24, Package Height: 11-1/2, Package Width: 8, Depth: 1.86, Stages: 2-Heat/Cool, Display: Digital, Number of Zones: 3, Suitable For Use With: Heat Pump, Domestic/Import: Import Intuitive installer set up easy-to-follow, digital display uses real language to guide installer through four easy steps, Standard checkout procedure, Robust push terminals, Common-sense LEDS, Clean, professional installation, Variable speed fan control, Discharge air temperature staging, RedLINK enabled for wireless operation when used with THM4000R1000 wireless adapter, Controls up to 2 heat or 2 cool conventional or 2 heat or 1 cool heat pump Honeywell 085267314367
Pack Quantity: 1, Country of Origin: MX, Package Weight: 5.05, Voltage Rating: 24, Package Height: 13.42, Package Width: 8, Depth: 1.86, Stages: 2-Cool/3-Heat, Display: Digital, Number of Zones: 4, Suitable For Use With: Heat Pump, Domestic/Import: Import Intuitive installer setup, Easy-to-follow, digital display uses real language to guide installer through four easy steps, Standard checkout procedure, Robust push terminals, Common-sense LEDS, Clean, professional installation, Variable speed fan control, Discharge air temperature staging, RedLINK enabled for wireless operation when used with THM4000R1000 wireless adapter, Controls up to 2 heat or 2 cool conventional or 2 heat or 1 cool heat pump, Controls up to two stages compressor and two stages fossil fuel in dual fuel mode Honeywell 085267314374
Country of Origin: MX, Series: ZD Series, Size: 20 x 10, Shape: Rectangular, Voltage Rating: 24, Amperage Rating: 0.32, Rotation Angle: 90 deg, Timing: 30, Blade Action: Parallel, Motor Type: Power Closed, Spring Open, Electrical Connection: M1-Power/M6-Common/M4-LED Indication Terminal, Temperature Rating: 32 to 120, Material: Aluminum, Domestic/Import: Import Mechanical visual position indicator for damper status, Solid construction using extruded aluminum frame and blades, Parallel blade design for low leakage performance, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, Reliable, strong, 24 V spring return motor, Fail-safe, normally open operation, Ordering Instructions: Order ZD (dimensions 1) x (dimensions 2), (motor is always mounted on dimensions 2 side) for example, ZD10x8 is a 10 in x 8 in damper with the motor on the 8 in side, but a ZD8x10 is an 8 in x 10 in damper, Damper can be installed in any orientation (mounting side can be on either the bottom or the side of the duct), Motor or actuators mounting - side or top, 30 sec power closed/10 sec spring return Honeywell 085267569828
Country of Origin: MX, Series: ZD Series, Size: 20 x 12, Shape: Rectangular, Voltage Rating: 24, Amperage Rating: 0.32, Rotation Angle: 90 deg, Timing: 30, Blade Action: Parallel, Motor Type: Power Closed, Spring Open, Electrical Connection: M1-Power/M6-Common/M4-LED Indication Terminal, Temperature Rating: 32 to 120, Material: Aluminum, Domestic/Import: Import Mechanical visual position indicator for damper status, Solid construction using extruded aluminum frame and blades, Parallel blade design for low leakage performance, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, Reliable, strong, 24 V spring return motor, Fail-safe, normally open operation, Ordering Instructions: Order ZD (dimensions 1) x (dimensions 2), (motor is always mounted on dimensions 2 side) for example, ZD10x8 is a 10 in x 8 in damper with the motor on the 8 in side, but a ZD8x10 is an 8 in x 10 in damper that h, Damper can be installed in any orientation (mounting side can be on either the bottom or the side of the duct), Motor or actuators mounting - side or top, 30 sec power closed/10 sec spring return Honeywell 085267467698
Pack Quantity: 1, Country of Origin: MX, Package Weight: 7, Series: ZD Series, Size: 16 x 10, Shape: Rectangular, Voltage Rating: 24, Amperage Rating: 0.32, Rotation Angle: 90 deg, Timing: 30, Blade Action: Parallel, Motor Type: Power Closed, Spring Open, Electrical Connection: 2-Wire, Temperature Rating: 32 to 120, Material: Aluminum, Domestic/Import: Import Mechanical visual position indicator for damper status, Solid construction using extruded aluminum frame and blades, Parallel blade design for low leakage performance, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, Reliable, strong, 24 V spring return motor, Fail-safe, normally open operation, Ordering Instructions: Order ZD (dimensions 1) x (dimensions 2), (motor is always mounted on dimensions 2 side) for example, ZD10x8 is a 10 in x 8 in damper with the motor on the 8 in side, but a ZD8x10 is an 8 in x 10 in damper that h, Damper can be installed in any orientation (mounting side can be on either the bottom or the side of the duct), Motor or actuators mounting - side or top, 30 sec power closed/10 sec spring return Honeywell 085267226530
Pack Quantity: 1, Country of Origin: MX, Package Weight: 6.45, Series: ZD Series, Size: 16 x 8, Shape: Rectangular, Voltage Rating: 24, Amperage Rating: 0.32, Rotation Angle: 90 deg, Timing: 30, Blade Action: Parallel, Motor Type: Power Closed, Spring Open, Electrical Connection: 2-Wire, Temperature Rating: 32 to 120, Material: Aluminum, Domestic/Import: Import Mechanical visual position indicator for damper status, Solid construction using extruded aluminum frame and blades, Parallel blade design for low leakage performance, Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light, Reliable, strong, 24 V spring return motor, Fail-safe, normally open operation, Ordering Instructions: Order ZD (dimensions 1) x (dimensions 2), (motor is always mounted on dimensions 2 side) for example, ZD10x8 is a 10 in x 8 in damper with the motor on the 8 in side, but a ZD8x10 is an 8 in x 10 in damper that h, Damper can be installed in any orientation (mounting side can be on either the bottom or the side of the duct), Motor or actuators mounting - side or top, 30 sec power closed/10 sec spring return Honeywell 085267226523
Product Image Not Available PRESSURE SWITCH 550PSI COMFORT SYNC
Locke Part #: L3971 MFG Part #: 27W13
Allied Air
Country of Origin: US, Includes: Model SAS Supply Air Sensor, Model OAS Outdoor Air Sensor, Model CPLS Coil Protection Lockout Switch, Height: 9-7/8, Width: 10, Depth: 1.7, Number of Zones: 3, Domestic/Import: Domestic BMPlus3000 3 zone model, 40 to 75 VA max 18 to 30 VAC 50/60 Hz NEC class 2 transformer, Max 15 VA at 24 VAC, 4 A over-current protection, 18 ga solid copper wire, do not use standard or shield cable wiring, -20 to 160 deg F, 0 to 90% RH non-condensing humidity, 3 zones, expandable to 5 or 7 zones with the addition of 1 or 2 model XM-2 expansion modules, Gas electric/hydro - up to 2 stages heating and 2 stages cooling, heat pump conventional or dual fuel - up to 3 stages heating and 2 stages cooling compatible equipment, Any single stage heat/cool thermostat or 2 stage heat, 1 stage cool heat pump thermostat, EWC models URD, ND, RSD and SID, any 24 VAC 3 wire or 2 wire damper, Staging via adjustable on board timer or OAS (7 to 42 minutes or 7 to 42 deg F), 50% rule to limit staging if less than half the total zones are demanding heating or cooling, 100% dual fuel compatible, On board LED's indicate system operation EWC Controls 845484008780
Country of Origin: US, Includes: Model SAS Supply Air Sensor, Model OAS Outdoor Air Sensor, Model CPLS Coil Protection Lockout Switch, Height: 9-7/8, Width: 10, Depth: 1.7, Number of Zones: 5, Domestic/Import: Domestic BMPlu5000 5 zone model, 40 to 75 VA max 18 to 30 VAC 50/60 Hz NEC class 2 transformer, Max 15 VA at 24 VAC, 4 A over-current protection, 18 ga solid copper wire, do not use standard or shield cable wiring, -20 to 160 deg F, 0 to 90% RH non-condensing humidity, 5 zones, expandable to 7 zones with the addition of 1 or 2 model XM-2 expansion modules, Gas electric/hydro - up to 2 stages heating and 2 stages cooling, heat pump conventional or dual fuel - up to 3 stages heating and 2 stages cooling compatible equipment, Any single stage heat/cool thermostat or 2 stage heat, 1 stage cool heat pump thermostat, EWC models URD, ND, RSD and SID, any 24 VAC 3 wire or 2 wire damper, Staging via adjustable on board timer or OAS (7 to 42 minutes or 7 to 42 deg F), 50% rule to limit staging if less than half the total zones are demanding heating or cooling, 100% dual fuel compatible, On board LED's indicate system operation EWC Controls
Mfg Standards/Approvals: NEC Class 2, Includes: Supply Air Sensor, Type: Non-Expandable, Voltage Rating: 19 to 30, Height: 9-7/8, Width: 10, Depth: 1.7, Stages: 1-Cool/2-Heat, Display: LED, Number of Zones: 2 to 3, Suitable For Use With: EWC Models URD, ND, RSD and SID Damper and Two-Stage Heat Pump and Dual Fuel Thermostat 2 to 3 zones, non-expandable, Compatible Equipment: Gas/electric/hydro up to 2 stages heating and 1 stage cooling and heat pump conventional up to 2 stages heating and 1 stage cooling, Compatible thermostat: Any single stage heat/cool thermostat or 2 stage heat, 1 stage cool heat pump thermostat, Compatible Damper: EWC models URD, ND, RSD and SID, any 24vac 3 wire or 2 wire damper, Staging via adjustable on-board timer (7 to 42 min), Enhanced hydro-air capabilities, can delay fan activation on Heating demand, Supply air temperature monitoring to help protect HVAC equipment, Adjustable purge time (90 or 120 sec), On board LED's indicate system operation EWC Controls
Includes: (2) Pilot Tubes, (2) 1/4 in x 8 ft Pressure Tubing, Size: 10, Shape: Round, Voltage Rating: 24, Material: Steel, Finish: Galvanized, Domestic/Import: Domestic 1 to 2.4 in W.C operating, Belimo D3 dynamic response pressure sensor, (2) 1/4 in OD barbs integrated air pressure connector, 24 VAC at 4 V/A 2 W power, 18 AWG copper wiring, NEMA 3S, IP54 case, Manual gear release, Non-volatile memory, no maintenance required, The SBD can be mounted horizontally, vertically or any other position required in the field EWC Controls 845484013357
Domestic/Import: Domestic, Finish: Galvanized, Includes: (2) Pilot Tubes, (2) 1/4 in x 8 ft Pressure Tubing, Material: Steel, Shape: Round, Size: 12, Voltage Rating: 24 1 to 2.4 in W.C operating, Belimo D3 dynamic response pressure sensor, (2) 1/4 in OD barbs integrated air pressure connector, 24 VAC at 4 V/A 2 W power, 18 AWG copper wiring, NEMA 3S, IP54 case, Manual gear release, Non-volatile memory, no maintenance required, The SBD can be mounted horizontally, vertically or any other position required in the field EWC Controls
Domestic/Import: Domestic, Finish: Galvanized, Includes: (2) Pilot Tubes, (2) 1/4 in x 8 ft Pressure Tubing, Material: Steel, Shape: Round, Size: 14, Voltage Rating: 24 1 to 2.4 in W.C operating, Belimo D3 dynamic response pressure sensor, (2) 1/4 in OD barbs integrated air pressure connector, 24 VAC at 4 V/A 2 W power, 18 AWG copper wiring, NEMA 3S, IP54 case, Manual gear release, Non-volatile memory, no maintenance required, The SBD can be mounted horizontally, vertically or any other position required in the field EWC Controls
Domestic/Import: Domestic, Finish: Galvanized, Includes: (2) Pilot Tubes, (2) 1/4 in x 8 ft Pressure Tubing, Material: Steel, Shape: Round, Size: 8, Voltage Rating: 24 1 to 2.4 in W.C operating, Belimo D3 dynamic response pressure sensor, (2) 1/4 in OD barbs integrated air pressure connector, 24 VAC at 4 V/A 2 W power, 18 AWG copper wiring, NEMA 3S, IP54 case, Manual gear release, Non-volatile memory, no maintenance required, The SBD can be mounted horizontally, vertically or any other position required in the field EWC Controls
Feedback