Loading ...

Loading ...

Search in: Cements & Primers Category

R0020.jpg1/2 Pint CPVC Cement 1 Step
Locke Part #: R0021MFG Part #: 31911
Oatey SCS
R0020.jpg1/4 Pint CPVC Cement 1 Step
Locke Part #: R0020MFG Part #: 31910
Oatey SCS
M736.jpg1 Gallon Roofing Cement
Locke Part #: M0736MFG Part #: 04045
Expands and contracts with weather, forms a tight strong seal, stays soft and pliable, and repairs flashings. BLACK SWAN MFG. CO
R0020.jpg1 Pint CPVC Cement 1 Step
Locke Part #: R0022MFG Part #: 31912
Oatey SCS
R0003.jpg1 Quart Purple Primer 8700
Locke Part #: R0003MFG Part #: 30758
For cleaning & softening pipe for best joint. Oatey SCS
M736.jpg1 Quart Roofing Cement
Locke Part #: M0735MFG Part #: 04040
Expands and contracts with weather, forms a tight strong seal, stays soft and pliable, and repairs flashings. BLACK SWAN MFG. CO
M1202.jpg10 oz. Neoprene Cement
Locke Part #: M1202MFG Part #: 04039
Prof. elastomeric cement, 50X stronger than asphalt cement. Great for sealing screw heads, laps on metal, 250% elongation. Flexible & watertight for up to 20 years. BLACK SWAN MFG. CO
Capacity: 11 Oz., Shelf Life: 2 Years No Mess - No Waste, Spray at any angle, Goes twice as far as brush and can method, Work in a wider range of temperatures, One-step primer/cleaner and solvent weld cement all delivered in a sealed aerosol system., Recommended for solvent welding PVC pipe and fittings up to 6 diameter Schedule 20, 30, 40, 80 & other PVC pipe., Can be used for potable water, sewer and drain, waste and vent systems., Maximum VOC per SCAQMD1168, Meets ASTM-D2564 PVC (certified by IAPMO & Columbus Testing Labs), Meets ANSI/NSF-61 drinking water (certified by IAPMO), Meets ASTM-D 3138 transition (certified by Columbus Testing Labs), Meets ASTM-D 2235 ABS (certified by Columbus Testing Labs), Meets ASTM-F 656 primer (certified by Columbus Testing Labs) Jones Stephen Cor
R2606.jpg16 OZ. ABS to PVC
Locke Part #: R2608MFG Part #: 30925
Medium-bodied green colored cement for use in joining ABS to PVC in non-pressure transition joints. All schedules up to 6" diameter pipe and fittings. Recommended application temperature 40 F to 100 F. Meets ASTM D-3138. Oatey SCS
R2600.jpg16 OZ. PVC Heavy Duty Gray
Locke Part #: R2600MFG Part #: 31095
For solvent welding all schedules and classes of PVC pipe and fittings up to 12" diameter, and non-pressure applications up to 18". Can be used for potable water, sewer and drain, waste and vent systems., Thick formula fills gaps in large diameter pipe and fittings., Meets ASTM D-2564. Oatey SCS
R2595.jpg16oz. PVC R-R-S Blue
Locke Part #: R2597MFG Part #: 30893
D-2564. Oatey SCS
R2606.jpg32 OZ. ABS to PVC
Locke Part #: R2609MFG Part #: 30926
Medium-bodied green colored cement for use in joining ABS to PVC in non-pressure transition joints. All schedules up to 6" diameter pipe and fittings. Recommended application temperature 40 F to 100 F. Meets ASTM D-3138. Oatey SCS
R0017.jpg32 OZ. CPVC Cement
Locke Part #: R0017MFG Part #: 31131
Medium-bodied orange colored cement for use on CPVC pipe and fittings. Up to 6" diameter. For C.T.S. (copper tube size) and Sch. 80, potable water pressure pipe. Recommended application temperature 40 F to 100 F. Meets ASTM F-493. Oatey SCS
R2607.jpg32 OZ. CPVC Heavy Duty Gray Cement
Locke Part #: R2607MFG Part #: 31037
For solvent welding CPVC pipe and fittings up to 12" diameter. For sewer and drain, waste and vent systems. Meets ASTM F-493 Oatey SCS
R2600.jpg32 OZ. PVC Heavy Duty Gray
Locke Part #: R2601MFG Part #: 31105
For solvent welding all schedules and classes of PVC pipe and fittings up to 12" diameter, and non-pressure applications up to 18". Can be used for potable water, sewer and drain, waste and vent systems., Thick formula fills gaps in large diameter pipe and fittings., Meets ASTM D-2564. Oatey SCS
R2595.jpg32oz. PVC R-R-S Blue
Locke Part #: R2598MFG Part #: 30894
D-2564. Oatey SCS
R2606.jpg4 OZ. ABS to PVC
Locke Part #: R2606MFG Part #: 30900
Medium-bodied green colored cement for use in joining ABS to PVC in non-pressure transition joints. All schedules up to 6" diameter pipe and fittings. Recommended application temperature 40 F to 100 F. Meets ASTM D-3138. Oatey SCS
Capacity: 4.5 Oz., Shelf Life: 2 Years No Mess - No Waste, Spray at any angle, Goes twice as far as brush and can method, Work in a wider range of temperatures, One-step primer/cleaner and solvent weld cement all delivered in a sealed aerosol system., Recommended for solvent welding PVC pipe and fittings up to 6 diameter Schedule 20, 30, 40, 80 & other PVC pipe., Can be used for potable water, sewer and drain, waste and vent systems., Maximum VOC per SCAQMD1168, Meets ASTM-D2564 PVC (certified by IAPMO & Columbus Testing Labs), Meets ANSI/NSF-61 drinking water (certified by IAPMO), Meets ASTM-D 3138 transition (certified by Columbus Testing Labs), Meets ASTM-D 2235 ABS (certified by Columbus Testing Labs), Meets ASTM-F 656 primer (certified by Columbus Testing Labs) Jones Stephen Cor
Capacity: 4.5 Oz., Shelf Life: 2 Years No Mess - No Waste, Spray at any angle, Goes twice as far as brush and can method, Work in a wider range of temperatures, One-step primer/cleaner and solvent weld cement all delivered in a sealed aerosol system., Recommended for solvent welding PVC pipe and fittings up to 6 diameter Schedule 20, 30, 40, 80 & other PVC pipe., Can be used for potable water, sewer and drain, waste and vent systems., Maximum VOC per SCAQMD1168, Meets ASTM-D2564 PVC (certified by IAPMO & Columbus Testing Labs), Meets ANSI/NSF-61 drinking water (certified by IAPMO), Meets ASTM-D 3138 transition (certified by Columbus Testing Labs), Meets ASTM-D 2235 ABS (certified by Columbus Testing Labs), Meets ASTM-F 656 primer (certified by Columbus Testing Labs) Jones Stephen Cor
R2595.jpg4oz. PVC R-R-S Blue
Locke Part #: R2595MFG Part #: 30890
D-2564. Oatey SCS
R2595.jpg8oz. PVC R-R-S Blue
Locke Part #: R2596MFG Part #: 30891
D-2564. Oatey SCS
0636.jpgBlacktop & Roof Repair
Locke Part #: M1200MFG Part #: 0636
Warranty: Limited, Color: Black Use on dry/damp surfaces, apply with a stand. caulking gun. Forms a strong seal. RED DEVIL, INC 75339006368
R0086.jpgCement Cartridge
Locke Part #: R0086MFG Part #: SB190
SB-190 & produce an outer filter.) GENERAL PLASTICS
R2595.jpgGallon PVC R-R-S Blue
Locke Part #: R2599MFG Part #: 30895
D-2564. Oatey SCS
Size: Gallon, Appearance: Clear, Physical State: Liquid, Pack: 6, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 52 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 16 fl. oz., Appearance: Clear, Physical State: Liquid, Pack: 24, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 27 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 4 fl. oz., Appearance: Clear, Physical State: Liquid, Pack: 24, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 9 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 8 fl. oz, Appearance: Clear, Physical State: Liquid, Pack: 24, Viscosity: minimum 90 cps @ 73° F ± 2° F, Vapor Density: 7.47 ± 0.2 lbs/gallon, Carton Weight (Lbs): 16 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
2066S.jpgPlumb-Tite Blue Cement, 16 fl. oz.
Locke Part #: R0041MFG Part #: 2046S
Size: 16 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 27, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564. OATEY SCS dba/UNITED ELCHEM
2066S.jpgPlumb-Tite Blue Cement, 32 fl. oz.
Locke Part #: R0042MFG Part #: 2036S
Size: 32 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564. OATEY SCS dba/UNITED ELCHEM
2066S.jpgPlumb-Tite Blue Cement, 4 fl. oz.
Locke Part #: R0043MFG Part #: 2066S
Size: 4 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 9, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564. OATEY SCS dba/UNITED ELCHEM
2066S.jpgPlumb-Tite Blue Cement, 8 fl. oz.
Locke Part #: R0040MFG Part #: 2056S
Size: 8 fl. oz., Appearance: Blue, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.92 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 80-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 For use on all schedules and, classes of flexible and rigid PVC, pipe and fittings up to 6" diameter, with interference fit., Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various, environmental requirements., Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation., Recommended for potable water, pressure pipe and DWV, applications; Recommended, application temperature 40 F to, 110 F / 4 C to 43 C., No primer needed on non-pressure DWV, where local codes permit., Meets ASTM D2564. OATEY SCS dba/UNITED ELCHEM
Model: 14006 IPS Corporation 12181140062
Model: 14025 P-70 is the most aggressive PVC and CPVC primer commercially available. Excellent product for cold weather applications. If used properly P-70 will soften pipe and fitting surfaces which is necessary for the proper solvent welding of the materials. IPS Corporation 12182140253
Size: 32 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.95 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 81-85%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6 with interference fit., Polar-Weld PVC Solvent Cement will remain free flowing and maintain fast set-up times at temperatures down to -15 F., Can be used for potable water, sewer and drain, waste and vent systems, Compliant with California South Coast Air Quality Management District Rule 1168 and Ozone Transport Commission regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 8 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.95 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 81-85%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6 with interference fit., Polar-Weld PVC Solvent Cement will remain free flowing and maintain fast set-up times at temperatures down to -15 F., Can be used for potable water, sewer and drain, waste and vent systems, Compliant with California South Coast Air Quality Management District Rule 1168 and Ozone Transport Commission regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
R0014.jpgPVC Clear Cement
Locke Part #: R0014MFG Part #: 31020
Oatey SCS
QUIKRETE Hydraulic Water-Stop Cement is a rapid setting, high strength repair material designed to plug leaks instantly in concrete and masonry., Sets in 3-5 minutes and can be used above and below grade. Designed to block running water or leaks in cracked masonry or concrete surfaces., Foundation and retaining walls. Chimneys., Swimming pools, fountains and cisterns., Sealing around concrete pipe., ASTM C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM C191 Standard Test Method for Time of Setting of Hydraulic. Cement by Vicat Needle., Use QUIKRETE Hydraulic Water-Stop Cement for sealing around concrete pipes and for plugging leaks in:, Foundation and retaining walls, Chimneys, Swimming pools, fountains and cisterns QUIKRETE COMPANIES
7356S.jpgUni-Weld Clear Primer, 1 Gallon
Locke Part #: R0027MFG Part #: 7324
Size: Gallon, Appearance: Clear, Odor: Acetone, Flash Point: 0-4°F (based on acetone), Specific Gravity: 0.82 +/- 0.03 @ 20°C, Vapor Pressure: 400 mmHg @ 20°C, Boiling Point: 133°F (56°C), Evaporation Rate: (BUAC = 1) = 7-11, VOC: 510 g/L, Physical State: Liquid, Pack: 6, Vapor Density: 2.0 -2.5, Carton Weight (Lbs): 45, Solubility (H2O): 50-75%, Lower Flammability Limit: 2.0, Upper Flammability Limit: 13.0 Recommended for use with ABS, PVC and CPVC pipe and fittings., Clear Cleaner is formulated to remove dirt and oil from the surface of the piping in preparation for solvent welding., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or, being tested by compressed air or, gases. OATEY SCS dba/UNITED ELCHEM
7356S.jpgUni-Weld Clear Primer, 16 fl. oz.
Locke Part #: R0005MFG Part #: 7346S
Size: 16 fl. oz., Appearance: Clear, Odor: Acetone, Flash Point: 0-4°F (based on acetone), Specific Gravity: 0.82 +/- 0.03 @ 20°C, Vapor Pressure: 400 mmHg @ 20°C, Boiling Point: 133°F (56°C), Evaporation Rate: (BUAC = 1) = 7-11, VOC: 510 g/L, Physical State: Liquid, Pack: 24, Vapor Density: 2.0 -2.5, Carton Weight (Lbs): 27, Solubility (H2O): 50-75%, Lower Flammability Limit: 2.0, Upper Flammability Limit: 13.0 Recommended for use with ABS, PVC and CPVC pipe and fittings., Clear Cleaner is formulated to remove dirt and oil from the surface of the piping in preparation for solvent welding., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or, being tested by compressed air or, gases. OATEY SCS dba/UNITED ELCHEM
7356S.jpgUni-Weld Clear Primer, 8 fl. oz.
Locke Part #: R0004MFG Part #: 7356S
Size: 8 fl. oz., Appearance: Clear, Odor: Acetone, Flash Point: 0-4°F (based on acetone), Specific Gravity: 0.82 +/- 0.03 @ 20°C, Vapor Pressure: 400 mmHg @ 20°C, Boiling Point: 133°F (56°C), Evaporation Rate: (BUAC = 1) = 7-11, VOC: 510 g/L, Physical State: Liquid, Pack: 24, Vapor Density: 2.0 -2.5, Carton Weight (Lbs): 16, Solubility (H2O): 50-75%, Lower Flammability Limit: 2.0, Upper Flammability Limit: 13.0 Recommended for use with ABS, PVC and CPVC pipe and fittings., Clear Cleaner is formulated to remove dirt and oil from the surface of the piping in preparation for solvent welding., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or, being tested by compressed air or, gases. OATEY SCS dba/UNITED ELCHEM
Size: 32 fl. oz., Appearance: Gray, Physical State: Liquid, Pack: 12, Viscosity: minimum 500 cps @ 73° F ± 2° F, Vapor Density: 7.74 ± 0.2 lbs/gallon, Carton Weight (Lbs): 26 Recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 16 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 27, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 32 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 4 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 9, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 8 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 2 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels., Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
R0003.jpgUni-Weld Purple Primer 1 Gallon
Locke Part #: R0028MFG Part #: 8724
Size: Gallon, Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 6, Vapor Density: 2.5, Carton Weight (Lbs): 46, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 OATEY SCS dba/UNITED ELCHEM
R0003.jpgUni-Weld Purple Primer 16 fl. oz.
Locke Part #: R0002MFG Part #: 8746S
Size: 16 fl. oz., Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 25, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 OATEY SCS dba/UNITED ELCHEM
R0003.jpgUni-Weld Purple Primer 4 fl. oz.
Locke Part #: R0015MFG Part #: 8766S
Size: 4 fl. oz., Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 8, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 OATEY SCS dba/UNITED ELCHEM
R0003.jpgUni-Weld Purple Primer 8 fl. oz.
Locke Part #: R0001MFG Part #: 8756S
Size: 8 fl. oz., Appearance: Purple, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.84 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 99.96%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 14, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 OATEY SCS dba/UNITED ELCHEM
Size: Gallon, Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 6, Vapor Density: 2.5, Carton Weight (Lbs): 52, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 16 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 27, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 32 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 4 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 9, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 8 fl. oz., Appearance: Clear, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 84-88%, Physical State: Liquid, Pack: 24, Vapor Density: 2.5, Carton Weight (Lbs): 16, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 Recommended for solvent welding use on all grades and types of PVC pipe and fittings up to 4 for Sch. 40 and up to 2 for Sch. 80 with interference fit., Can be used for potable water, sewer and drain, waste and vent systems., Compliant with California South Coast, Air Quality Management District, (SCAQMD) Rule 1168 and Ozone, Transport Commission (OTC), regulations for Volatile Organic, Compound emission levels, Not for use in a system using or being tested by compressed air or gases. OATEY SCS dba/UNITED ELCHEM
Size: 32 fl. oz., Appearance: Gray, Odor: Ether-like, Flash Point: 14-23°F (-10 to -5°C), Specific Gravity: 0.90 +/- 0.02 @ 20°C, Vapor Pressure: 145 mmHg @ 20°C, Boiling Point: 151°F (66°C), Evaporation Rate: (BUAC = 1) = 5.5 - 8.0, VOC: 75-79%, Physical State: Liquid, Pack: 12, Vapor Density: 2.5, Carton Weight (Lbs): 26, Solubility (H2O): Negligible, Lower Flammability Limit: 1.8, Upper Flammability Limit: 11.8 A heavy duty cement for all PVC pipes & fittings 2" & under. Fast setting. Designed for use in any climate. 2 hour average curing. Brush inside 1/2 pint, pint and quart cans. OATEY SCS dba/UNITED ELCHEM
Model: 106000021 A heavy duty cement for all PVC pipes & fittings 2" & under. Fast setting. Designed for use in any climate. 2 hour average curing. Brush inside 1/2 pint, pint and quart cans. IPS Corporation 12181100769
Model: 107190212 For large diameter pipe and fittings up to 30" diameter. Extra heavy bodied, slow setting, PVC cement for all classes and schedules. 3 Year Shelf Life Meets ASTM D-2564 IPS Corporation 12181101551
Model: 107210931 IPS Corporation 12181101629
Model: 107210921, Color: Blue, Size: Quart, Appearance: Blue, medium syrupy liquid, Odor: Ketone, Flash Point: -20°C (-4°F) TCC based on Acetone, Specific Gravity: 0.955 @23°C ( 73°F), Vapor Pressure: 190 mm Hg @ 20°C (68°F) Acetone, Boiling Point: 56°C (133°F) Based on first boiling component: Acetone, Evaporation Rate: > 1.0 (BUAC = 1), Solubility: Solvent portion soluble in water, Viscosity: Medium bodied, Vapor Density: >2.0 (Air = 1), Auto-Ignition Temperature: 321°C (610°F) based on THF, Melting/Freezing Point: -108.5°C (-163.3°F) Based on first melting component: THF, Flammability: Category 2, Boiling Range: 56°C (133°F) to 156°C (313°F), Cubic ft/Case: 0.78, Lbs/Case: 28, Odor Threshold: 0.88 ppm (Cyclohexanone), Units/Case: 12 Medium-bodied, fast-setting, high-strength, low-VOC PVC solvent cement. Suitable for use on rigid PVC with interference fit Sch. 40 through 6" and Sch. 80 through 4", Premium, high-strength formulation for irrigation, DWV, pool & spa, plumbing and non-pressure application, Suitable for use as a one-step cement without primer on PVC Sch. 40 and SDR pressure water piping systems through 4" unless primer is required by local code IPS Corporation 012181-101612
Model: 1870000 IPS Corporation 12181128916