Products | Sewer & Drain Fittings

Loading ...

Search in: Sewer & Drain Fittings Category


1-1/2" DWV End Cap, Glue On Locke Part #: R0814MFG Part #: 33468 Compare			Oatey SCS
12" 3/4 Plastic Grate For 3" Floor Sink with Aluminum Beehive Strainer Locke Part #: R1205MFG Part #: PDSG75 Compare	Size: 12", MFG#: PDSG75	12 diameter full grate, 54 square inch flow, 1 thick, Will fit any size deep sump floor sink, Available in plastic and cast metal, Plastic also available in half, and three-quarter grate patterns, Screws included	DIVERSE CORPORATE TECH
12" Full Plastic Grate For 3" Floor Sink with Aluminum Beehive Strainer Locke Part #: R1204MFG Part #: PDSG100 Compare	Size: 12", MFG#: PDSG100	12 diameter full grate, 54 square inch flow, 1 thick, Will fit any size deep sump floor sink, Available in plastic and cast metal, Plastic also available in half, and three-quarter grate patterns, Screws included	DIVERSE CORPORATE TECH
12 x 4 Saddle Tee SCH 40 Solvent Weld Branch Gasket Skirts with Strap Locke Part #: R0841MFG Part #: 736-0124 Compare	Size: 12 x 4		GPK PRODUCTS
2" Backwater Valve Locke Part #: R0960MFG Part #: 869-2P Compare			Sioux Chief Mfg
2" DWV End Cap, Glue On Locke Part #: R0815MFG Part #: 33470 Compare			Oatey SCS
2" Insert Plug Locke Part #: R0809MFG Part #: 85005 Compare		DWV plastic insert plugs used to close off drains for pressure test.	IPS Corporation
2" PVC floor drain Locke Part #: R1203MFG Part #: 832-2PNR Compare		6-1/2" Round nickel Ring & Strainer. 2" Connection Size. Adjustable AFTER the pour. ABS/PVC Base Adapter, ABS Coring Sleeve and Head Adapter.	Sioux Chief Mfg
2" PVC Floor Drain With C.O. Locke Part #: R0972MFG Part #: 800-P Compare		One piece. Only one glue joint needed to install. Full 3" evaporation seal built-in trap. Unbreakable strainer with 2 screws.	Sioux Chief Mfg
2" PVC Tom-Kap Flush-Fit Cleanout Adapter & Plug Locke Part #: R1027MFG Part #: 97481 Compare	Size: 2" PVC, Quantity: 24, Interleaved: 10021449974810, Dimensions (in): 7 x 8 x 6, Cubic Feet: 0.17	Threaded cleanout adapter fitting that cements inside pipe providing a flush-finished cleanout for drain, waste, and vent systems, It reduces installation cost, simplifies rough-in and is available in PVC or ABS, Tom-Kap is available as an adapter and plug unit in 2 , 3 , and 4 sizes and is recommended for use on schedule 40, SDR-35 and foam core., Reduces installation cost, Simplifies rough-in	Rectorseal	021449974813
2" Snap-In Drain Locke Part #: R1030MFG Part #: 845-2PPK Compare		All plastic, May be solvent welded or simply inserted in pipe, Allows cutting pipe flush with floor, May be used as a strainer for vent stack or air inlet, Fits Schedule 40 PVC DWV pipe	Sioux Chief Mfg
2x3x3 DOWNSPOUT ADPTR SDR-35 Locke Part #: R0233MFG Part #: P1903 Compare			STAN ROBERTS
2x3x4 DOWNSPOUT ADPTR SDR-35 Locke Part #: R0234MFG Part #: P1904 Compare			STAN ROBERTS
3" 1/16 BEND SDR-35 S/W Locke Part #: R0232MFG Part #: P1703 Compare		22-1/2 (1/16) bend	STAN ROBERTS
3" 1/4 BEND LONG SDR-35 S/W Locke Part #: R0215MFG Part #: P255 Compare			STAN ROBERTS
3" 1/8 BEND SDR-35 S/W Locke Part #: R0214MFG Part #: P502 Compare		45 (1/8) bend	STAN ROBERTS
3" Bottom Alum. Dome Strainer Locke Part #: R1216MFG Part #: 42755 Compare		Fits 3" PVC couplings / fitting hubs.	Oatey SCS
3" CAP SDR-35 S/W Locke Part #: R0231MFG Part #: P1603 Compare			STAN ROBERTS
3" COUPLING SDR-35 S/W Locke Part #: R0218MFG Part #: P602 Compare			STAN ROBERTS
3" Drain With Cover Locke Part #: R1199MFG Part #: 842-36PNR Compare		Highly polished cast metal top provides a fantastic finished look., Standard threads on drain throat for easy adaptability to any standard FIP adapter., Brass female thread inserts for strainer screws.	Sioux Chief Mfg
3" DWV End Cap, Glue On Locke Part #: R0816MFG Part #: 33472 Compare			Oatey SCS
3" DWV x 3" S & D Locke Part #: R0946MFG Part #: 05970 Compare		3" DWV. 4" S&D Pipe Adapter.	Mueller Industries
3" DWV x 4" S & D Locke Part #: R0949MFG Part #: 4800-SD 3 X 4" Compare		3" DWV. 4" S&D Pipe Adapter.	Mueller Industries
3" FITTING CLEANOUT SDR-35 Locke Part #: R0230MFG Part #: P1503 Compare		Less Plug	STAN ROBERTS
3" Floor Sink with Aluminum Beehive Strainer without Grate Locke Part #: R1202MFG Part #: PBH300 Compare	Size: 3", Strainer: SPB1A, MFG#: PBH300	14 x 14 square top, 54 square flow area., 12 diameter grate available in full plastic, aluminium, brass or nickel, and 1/2 and 3/4 plastic., Aluminium beehive secondary strainer., 5.5 deep sump area, Made of corrosive resistant plastic, Fits over 3 Schedule 40 DWV pipe., Interior surfaces are smooth and sloped for maximum flow (no corners or flat areas)., Threaded metal inserts for attaching grate.	DIVERSE CORPORATE TECH
3" PVC Clean Check Extendable Backwater Valve Kit Locke Part #: R1970MFG Part #: 96921 Compare	Size: 3" PVC, Quantity: 6, Interleaved: 10021449969236	Prevents sewage backup into a residence or commercial building as a result of a plugged sewer system, excess volume in the system or groundwater flooding, Designed to be installed easily outside a home, business or other structure, without using a costly manhole, and are readily accessible for maintenance or cleaning., The extendable valves consist of a tee-shaped valve body, a top collar and a bottom collar with a replaceable PVC flapper attached. In the event of back-pressure, the flapper blocks the reverse flow and prevents a sewage backup, No manhole required, Installs up to 12 ft. below ground level, Verticle offset from upstream to downstream side is: 3 in. & 4 in. valves 0.4 in., 6 in. valve 0.5 in., Clean Check valves are available in ABS and PVC and in multiple sizes, to meet the needs of most residential and commercial construction, New heavy duty flapper that withstands pressure of 75 psi at 100 ft. of head.	Rectorseal	021449969239
3" PVC floor drain Locke Part #: R1206MFG Part #: 832-36PNR Compare		6-1/2" Round nickel Ring & Strainer. 2" Connection Size. Adjustable AFTER the pour. ABS/PVC Base Adapter, ABS Coring Sleeve and Head Adapter.	Sioux Chief Mfg
3" PVC Floor Sink,12x12 Flange Locke Part #: R1212MFG Part #: 42721 Compare		Fits 3" PVC couplings / fitting hubs.	Oatey SCS
3" PVC Tom-Kap Flush-Fit Cleanout Adapter & Plug Locke Part #: R1025MFG Part #: 97483 Compare	Size: 3" PVC, Quantity: 23, Interleaved: 10021449974834, Dimensions (in): 9 x 11 x 8, Cubic Feet: 0.4	Threaded cleanout adapter fitting that cements inside pipe providing a flush-finished cleanout for drain, waste, and vent systems, It reduces installation cost, simplifies rough-in and is available in PVC or ABS, Tom-Kap is available as an adapter and plug unit in 2 , 3 , and 4 sizes and is recommended for use on schedule 40, SDR-35 and foam core., Reduces installation cost, Simplifies rough-in	Rectorseal	021449974837
3" SAN TEE SDR-35 S/W Locke Part #: R0216MFG Part #: P155 Compare			STAN ROBERTS
3" Sch. 40 Hub PVC Backwater Valve With 16" Shallow Access Sleeve Kit Locke Part #: R1976MFG Part #: 869-S3PS Compare	Case Qty: 1, Pack: Bulk, Individually Bar-Coded, Min Qty: 1		Sioux Chief Mfg
3" Snap-In Drain Locke Part #: R1031MFG Part #: 845-3PPK Compare		All plastic, May be solvent welded or simply inserted in pipe, Allows cutting pipe flush with floor, May be used as a strainer for vent stack or air inlet, Fits Schedule 40 PVC DWV pipe	Sioux Chief Mfg
3" TEE SDR-35 S/W Locke Part #: R0828MFG Part #: P102 Compare			STAN ROBERTS
3" WYE SDR-35 S/W Locke Part #: R0217MFG Part #: P302 Compare		45 High PVC	STAN ROBERTS
3" x 2" Saddle Tee Kit Less Gasket Locke Part #: R1021MFG Part #: S26004 Compare	Size: 3" x 2" Saddle Tee Less Gasket	Solvent branch, Use bushing to reduce 2" unit to 1-1/2", Kits include V-bolts, nuts and washers, Conversion kit also contains gasket mat for use with cast iron pipe	Jones Stephen Cor
3" x 4" Sewer Popper Cleanout And Relief Valve Locke Part #: G0100MFG Part #: S62304 Compare	Dimensions: 3" x 4"	Automatic pop-up releases sewage overflow outside the house, Prevents thousands of dollars in property damages, Eliminates health hazards associated with sewage overflow, Vandal- and tamper-resistant center, Threaded for 3" or 4" pipe or tapped together, Threaded unit can be used with PVC or ABS tapped together, Constructed of white PVC, For cast iron pipe, use standard no hub clamp, Meets Southern Building Code Section 301.10, Principle No.10, Patent No. 5,209,257	Jones Stephen Cor
3/4" Grate Only for R1212 Drain Locke Part #: R1215MFG Part #: 42752 Compare		Fits 3" PVC couplings / fitting hubs.	Oatey SCS
3x4x4 DOWNSPOUT ADPTR SDR-35 Locke Part #: R0249MFG Part #: P1906 Compare			STAN ROBERTS
4" 1/16 BEND SDR-35 S/W Locke Part #: R0213MFG Part #: P1704 Compare		22-1/2 (1/16) bend	STAN ROBERTS
4" 1/4 BEND LONG SDR-35 S/W Locke Part #: R0202MFG Part #: P256 Compare			STAN ROBERTS
4" 1/8 BEND SDR-35 S/W Locke Part #: R0201MFG Part #: P504 Compare		45 (1/8) bend	STAN ROBERTS
4" 2-WAY CLEANOUT SDR-35 SW Locke Part #: R0205MFG Part #: P1004 Compare			STAN ROBERTS
4" CAP SDR-35 S/W Locke Part #: R0197MFG Part #: P1604 Compare			STAN ROBERTS
4" COUPLING SDR-35 S/W Locke Part #: R0200MFG Part #: P604 Compare			STAN ROBERTS
4" DRAIN GRATE SDR-35 Locke Part #: R0640MFG Part #: P911 Compare			STAN ROBERTS
4" DWV End Cap, Glue On Locke Part #: R0817MFG Part #: 33474 Compare			Oatey SCS
4" on 10" Gasketed Saddle Tee Locke Part #: R0806MFG Part #: L2110-4 Compare		Gasketed inlet, gasketed skirt. Includes 2 stainless steel clamps	STAN ROBERTS
4" on 6" Gasketed Saddle Tee Locke Part #: R0804MFG Part #: L2106-4 Compare		Gasketed inlet, gasketed skirt. Includes 2 stainless steel clamps	STAN ROBERTS
4" on 8" Gasketed Saddle Tee Locke Part #: R0805MFG Part #: L2108-4 Compare		Gasketed inlet, gasketed skirt. Includes 2 stainless steel clamps	STAN ROBERTS
4" on 8" Saddle Wye Locke Part #: R0821MFG Part #: P2308-4 Compare		Solvent weld, with clamps	STAN ROBERTS
4" On 8" Solvent Weld Saddle Tee Locke Part #: R0820MFG Part #: P2108-4 Compare		With 2 stainless steel clamps	STAN ROBERTS
4" On 8" Tee With Locating Ring Locke Part #: R0819MFG Part #: P4108-04 Compare		With locating ring	STAN ROBERTS
4" PVC Clean Check Extendable Backwater Valve Kit Locke Part #: R1971MFG Part #: 96922 Compare	Size: 4" PVC, Quantity: 6, Interleaved: 10021449969243	Prevents sewage backup into a residence or commercial building as a result of a plugged sewer system, excess volume in the system or groundwater flooding, Designed to be installed easily outside a home, business or other structure, without using a costly manhole, and are readily accessible for maintenance or cleaning., The extendable valves consist of a tee-shaped valve body, a top collar and a bottom collar with a replaceable PVC flapper attached. In the event of back-pressure, the flapper blocks the reverse flow and prevents a sewage backup, No manhole required, Installs up to 12 ft. below ground level, Verticle offset from upstream to downstream side is: 3 in. & 4 in. valves 0.4 in., 6 in. valve 0.5 in., Clean Check valves are available in ABS and PVC and in multiple sizes, to meet the needs of most residential and commercial construction, New heavy duty flapper that withstands pressure of 75 psi at 100 ft. of head.	Rectorseal	021449969246
4" PVC Tom-Kap Flush-Fit Cleanout Adapter & Plug Locke Part #: R1026MFG Part #: 97485 Compare	Size: 4" PVC, Quantity: 24, Interleaved: 10021449974858, Dimensions (in): 10x10x14, Cubic Feet: .73	Threaded cleanout adapter fitting that cements inside pipe providing a flush-finished cleanout for drain, waste, and vent systems, It reduces installation cost, simplifies rough-in and is available in PVC or ABS, Tom-Kap is available as an adapter and plug unit in 2 , 3 , and 4 sizes and is recommended for use on schedule 40, SDR-35 and foam core., Reduces installation cost, Simplifies rough-in	Rectorseal	021449974851
4" SAN TEE SDR-35 S/W Locke Part #: R0204MFG Part #: P156 Compare			STAN ROBERTS
4" Sch. 40 Hub PVC Backwater Valve With 16" Shallow Access Sleeve Kit Locke Part #: R1978MFG Part #: 869-S4PS Compare	Case Qty: 1, Pack: Bulk, Individually Bar-Coded, Min Qty: 1		Sioux Chief Mfg
4" SDR X 4" DWV BUSHING Locke Part #: R0194MFG Part #: P1208 Compare		4" S&D x 4" PVC DWV. Connects PVC sewer spigot to DWV hub.	STAN ROBERTS
4" Snap-In Drain Locke Part #: R1032MFG Part #: 845-4PPK Compare		All plastic, May be solvent welded or simply inserted in pipe, Allows cutting pipe flush with floor, May be used as a strainer for vent stack or air inlet, Fits Schedule 40 PVC DWV pipe	Sioux Chief Mfg
4" STREET 1/8 BEND SDR-35 S/W Locke Part #: R0219MFG Part #: P404 Compare			STAN ROBERTS
4" Tapping Saddle With Epoxy Kit (Tulsa Code) Locke Part #: G0241MFG Part #: HTS4/E Compare	Size: 4"		PREDCO
4" TEE SDR-35 S/W Locke Part #: R0829MFG Part #: P104 Compare			STAN ROBERTS
4" THREADED PLUG SDR-35 Locke Part #: R0195MFG Part #: P1154 Compare			STAN ROBERTS
4" WYE SDR-35 S/W Locke Part #: R0203MFG Part #: P304 Compare			STAN ROBERTS
4" x 2" Saddle Tee Kit Less Gasket Locke Part #: R1022MFG Part #: S26005 Compare	Size: 4" x 2" Saddle Tee Less Gasket	Solvent branch, Use bushing to reduce 2" unit to 1-1/2", Kits include V-bolts, nuts and washers, Conversion kit also contains gasket mat for use with cast iron pipe	Jones Stephen Cor
4" x 3" Saddle Tee Kit Less Gasket Locke Part #: R1023MFG Part #: S26-006 Compare	Size: 4" x 3" Less Gasket	Solvent branch, Use bushing to reduce 2" unit to 1-1/2", Kits include V-bolts, nuts and washers, Conversion kit also contains gasket mat for use with cast iron pipe	Jones Stephen Cor
4" x 4" Saddle Tee Kit Less Gasket Locke Part #: R1024MFG Part #: S26007 Compare	Size: 4" x 4" Less Gasket	Solvent branch, Use bushing to reduce 2" unit to 1-1/2", Kits include V-bolts, nuts and washers, Conversion kit also contains gasket mat for use with cast iron pipe	Jones Stephen Cor
4"ST 1/4 BEND SHORT SDR-35 S/W Locke Part #: R0207MFG Part #: P224 Compare			STAN ROBERTS
4 CROSS SDR-35 S/W Locke Part #: R0198MFG Part #: P179 Compare			STAN ROBERTS
4 FEMALE ADAPTER SDR-35 Locke Part #: R0235MFG Part #: P1404 Compare			STAN ROBERTS
4 FITTING CLEANOUT SDR-35 Locke Part #: R0196MFG Part #: P1504 Compare		Less Plug	STAN ROBERTS
4x3 RED COUPLING SDR-35 S/W Locke Part #: R0199MFG Part #: P654 Compare			STAN ROBERTS
6" 1/4 BEND LONG SDR-35 S/W Locke Part #: R0209MFG Part #: P257 Compare			STAN ROBERTS
6" 1/8 BEND SDR-35 S/W Locke Part #: R0212MFG Part #: P506 Compare		45 (1/8) bend	STAN ROBERTS
6" CAP SDR-35 S/W Locke Part #: R0229MFG Part #: P1606 Compare			STAN ROBERTS
6" COUPLING SDR-35 S/W Locke Part #: R0193MFG Part #: P606 Compare			STAN ROBERTS
6" On 8" Solvent Weld Saddle Tee Locke Part #: R0831MFG Part #: P2108-6 Compare		With 2 stainless steel clamps	STAN ROBERTS
6" PVC Clean Check Extendable Backwater Valve Kit Locke Part #: R1972MFG Part #: 96926 Compare	Size: 6" PVC, Quantity: 3, Interleaved: 10021449969267	Prevents sewage backup into a residence or commercial building as a result of a plugged sewer system, excess volume in the system or groundwater flooding, Designed to be installed easily outside a home, business or other structure, without using a costly manhole, and are readily accessible for maintenance or cleaning., The extendable valves consist of a tee-shaped valve body, a top collar and a bottom collar with a replaceable PVC flapper attached. In the event of back-pressure, the flapper blocks the reverse flow and prevents a sewage backup, No manhole required, Installs up to 12 ft. below ground level, Verticle offset from upstream to downstream side is: 3 in. & 4 in. valves 0.4 in., 6 in. valve 0.5 in., Clean Check valves are available in ABS and PVC and in multiple sizes, to meet the needs of most residential and commercial construction, New heavy duty flapper that withstands pressure of 75 psi at 100 ft. of head.	Rectorseal	021449969260
6" SAN TEE SDR-35 S/W Locke Part #: R0830MFG Part #: P-157 Compare			STAN ROBERTS
6" TEE SDR-35 S/W Locke Part #: R0211MFG Part #: P106 Compare			STAN ROBERTS
6" THREADED PLUG SDR-35 Locke Part #: R0228MFG Part #: P1156 Compare			STAN ROBERTS
6" WYE SDR-35 S/W Locke Part #: R0208MFG Part #: P306 Compare		45 High PVC	STAN ROBERTS
6 FITTING CLEANOUT SDR-35 Locke Part #: R0227MFG Part #: P1506 Compare		Less Plug	STAN ROBERTS
6X4 BUSHING SWR X SWR SDR-35 Locke Part #: R0210MFG Part #: P1216 Compare			STAN ROBERTS
6X6 SEWER X DWV SDR-35 Locke Part #: R1042MFG Part #: P659 Compare		3" DWV. 4" S&D Pipe Adapter.	STAN ROBERTS
8 x 4 Saddle Tee SCH 40 Solvent Weld Branch Gasket Skirts with Strap Locke Part #: R0837MFG Part #: 736-0084CR Compare	Size: 8x4		GPK PRODUCTS
AB&A Commercial Roof Drain with Cast Iron Dome for 4 PVC Pipe. Locke Part #: R1020MFG Part #: 86105 Compare	Model: 4864	PVC roof drain with cast iron dome	IPS Corporation	12181861059
AB&A Complete Cleanout, 6 Nickel Bronze CO Tapped & Plugged w/Crown-3 x 4 Bushing - PVC. Locke Part #: R1201MFG Part #: 65301 Compare	Model: ABA8255	Fits over 3" & inside 4" schedule 40 pipe & 6" diameter access cover, PVC. 3" IPS tailpiece adjusts to desired finish level.	IPS Corporation	767580026751
AB&A Nickel Bronze Drain Strainer Locke Part #: R1196MFG Part #: 69208 Compare	Model: ABA8600		IPS Corporation	767580029448
Epoxy Kit Only For G2041 Predco Tapping Saddle Locke Part #: G0200MFG Part #: PE44 Compare			PREDCO
Flapper & Carrier For 3" Backwater Valve Locke Part #: R1987MFG Part #: 869-SF3 Compare	Case Qty: 10, Pack: Bulk, Individually Bar-Coded, Min Qty: 10	Available for 3" or 4" Sch. 40 DWV lines., Valves can be adapted for standard, shallow-depth or deep-bury installations, Modular valve design allows for interchangeable accessories less inventory, Structurally rugged and molded from engineered resins to stand up to job site abuse, The unique flapper creates a tighter seal than other backwater valves	Sioux Chief Mfg
Flexible Saddle Tees with Clamps, 4" Locke Part #: G0451MFG Part #: 4T/C Compare	Color: Black, Size: 4"	One saddle fits pipe 4" to 12" diameters. Has stainless steel clamps.	NDS, INC	52063048970
Flexible Saddle Tees with Clamps, 6" Locke Part #: G0452MFG Part #: 6T/C Compare	Color: White, Size: 6"	One saddle fits pipe 4" to 12" diameters. Has stainless steel clamps.	NDS, INC	52063049700
Full Grate Only for R1212 Drain Locke Part #: R1214MFG Part #: 42753 Compare		Fits 3" PVC couplings / fitting hubs.	Oatey SCS
Gravity Backwater Valve 3" PVC Locke Part #: R0970MFG Part #: 375P Compare	Color: White		NDS, INC	52063333755
Gravity Backwater Valve 3" PVC with Riser and Cover Locke Part #: R0962MFG Part #: 375PR W/RISER Compare	Color: White		NDS, INC	52063343754
Gravity Backwater Valve 4" PVC Locke Part #: R0971MFG Part #: 475P Compare	Color: White		NDS, INC	52063447537
Gravity Backwater Valve 4" PVC with Riser and Cover Locke Part #: R0963MFG Part #: 475PR W/RISER Compare	Color: White		NDS, INC	52063447544
Gravity Backwater Valve 6" PVC Locke Part #: R1974MFG Part #: 675P Compare	Color: White		NDS, INC	52063666754
PVC Backwater Valve 3" Flapper Locke Part #: R1975MFG Part #: 1530303 Compare	Color: White		NDS, INC	52063028798
PVC Backwater Valve 4" Flapper Locke Part #: R1977MFG Part #: 1530403 Compare	Color: White		NDS, INC	52063028859
Replacement Aluminum Beehive Strainer For 2”, 3”, and 4” Floor Sinks Locke Part #: R1207MFG Part #: SPB1A Compare	MFG#: SPB1A	Aluminium beehive strainer for 2 , 3 , and 4 floor sinks and deep sump utility drains.	DIVERSE CORPORATE TECH
Saddle Band Up To 15" Locke Part #: G0201MFG Part #: 5B/F Compare		For pipe up to 15"	PREDCO
Saddle Wye Gasket Branch, Solvent Skirt with Straps, Size-10 x 4" Locke Part #: R0839MFG Part #: 736-0104 Compare	Size: 10 x 4", Dimension L1: 9.37, Dimension H: 7.80, LB/100: 181, Dimension SD: 1.80		GPK PRODUCTS
Saddle Wye Gasket Branch, Solvent Skirt with Straps, Size-6 x 4" Locke Part #: R0836MFG Part #: 736-0064 Compare	Size: 6 x 4", Dimension L1: 13.75, Dimension H: 6.12, LB/100: 185, Dimension SD: 1.80		GPK PRODUCTS
Test-Tite Combination Kap-On Test Caps: Tests 1-1/2 & 2 DWV Pipe (100/Bag) Locke Part #: R0812MFG Part #: 86615 Compare	Model: KO12		IPS Corporation	12181866153
Test-Tite Combination Kap-On Test Caps: Tests 3 & 4 DWV Pipe (50/Bag) Locke Part #: R0813MFG Part #: 86620 Compare	Model: KO34		IPS Corporation	12181866207
Test-Tite Plug-On Test Caps, Test 1-1/2 DWV Pipe (100/Bag) Locke Part #: R0808MFG Part #: 85000 Compare	Model: 5817P11/2	DWV plastic insert plugs used to close off drains for pressure test.	IPS Corporation	12181850008
Test-Tite Plug-On Test Caps, Test 3 DWV Pipe (25/Bag) Locke Part #: R0810MFG Part #: 85010 Compare	Model: 5817P3	DWV plastic insert plugs used to close off drains for pressure test.	IPS Corporation	12181850107
Test-Tite Plug-On Test Caps, Test 4 DWV Pipe (20/Bag) Locke Part #: R0811MFG Part #: 85015 Compare	Model: 5817P4	DWV plastic insert plugs used to close off drains for pressure test.	IPS Corporation	12181850152
Upper & Lower Deep-Bury Adapters PVC, For Use with 3" or 4" Backwater Valves Purchased Separately Locke Part #: R1979MFG Part #: 869-S4PDB Compare	Case Qty: 1, Pack: Bulk, Individually Bar-Coded, Min Qty: 1	Available for 3" or 4" Sch. 40 DWV lines., Valves can be adapted for standard, shallow-depth or deep-bury installations, Modular valve design allows for interchangeable accessories less inventory, Structurally rugged and molded from engineered resins to stand up to job site abuse, The unique flapper creates a tighter seal than other backwater valves	Sioux Chief Mfg