Loading ...

Loading ...

Search in: Silcocks Category

M4138.jpg#11 Replacement Oval Handle
Locke Part #: M0594MFG Part #: PK1290 Compare
Integral vacuum breaker & self draining features.
M0313.jpg#14, #17 Handle
Locke Part #: M0313MFG Part #: 30099 Compare
Combination 1/2" Male Pipe Thread & 1/2" Female Copper Water Tube Inlet. Metal Handle. 1/2" MIP x 1/2" FIP.
M4249.jpg#3 Handle Packing
Locke Part #: M4151MFG Part #: 3 Compare
1/2" FIP / 3/4" MIP frost proof lawn faucet.
646.jpg1/2" Brass Hose Bibb
Locke Part #: M0491MFG Part #: M491 LF Compare
Lead Free Forged Brass, 125 WOG , Hose Bibb-Male, Ball Valve Type, Hose x MIP 1/2" and 3/4", 1/2" MIP x 1/2" Solder Inlet
All-In-One Hydrant and Vacuum Breaker, Thread-On Vacuum Breaker NOT REQUIRED, Bright Orange ID Tag for Easy Identification by Inspectors (Removal Only by End User), Frost-Proof Anti-Siphon Protection, If Backflow Occurs, Contaminated Water Evacuates Out the Weep Hole, No Noise During Operation, Large Flange for Easy Installation, No Leak O-Ring Bonnet (No Packing Nut to Tighten, No More Leaks!), Eliminates Damaging Water Hammer, Comfortable Rubberized Coated Handle, Code Approved, Replaces Arrowhead 420 Series
All-In-One Hydrant and Vacuum Breaker, Thread-On Vacuum Breaker NOT REQUIRED, Bright Orange ID Tag for Easy Identification by Inspectors (Removal Only by End User), Frost-Proof Anti-Siphon Protection, If Backflow Occurs, Contaminated Water Evacuates Out the Weep Hole, No Noise During Operation, Large Flange for Easy Installation, No Leak O-Ring Bonnet (No Packing Nut to Tighten, No More Leaks!), Eliminates Damaging Water Hammer, Comfortable Rubberized Coated Handle, Code Approved, Replaces Arrowhead 420 Series
Length: 10” Insertion, Inlet Size: 1/2" Crimp PEX, Catalog Sequence: 11, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 10” Insertion, Inlet Size: 1/2" Crimp PEX, Catalog Sequence: 8 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
Length: 12" Insertion, Inlet Size: 1/2" Crimp PEX, Catalog Sequence: 9 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
Length: 8" Insertion, Inlet Size: 1/2" Crimp PEX, Catalog Sequence: 7 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
M4138.jpg1/2" F.I.P or 3/4" M.I.P. x 10"
Locke Part #: M0591MFG Part #: 485-10LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" F.I.P or 3/4" M.I.P. x 12"
Locke Part #: M0592MFG Part #: 485-12LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" F.I.P or 3/4" M.I.P. x 14"
Locke Part #: M0593MFG Part #: 485-14LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" F.I.P or 3/4" M.I.P. x 8"
Locke Part #: M0590MFG Part #: 485-08LF Compare
Integral vacuum breaker & self draining features.
M0559.jpg1/2" FIP Brass Angle Sillcock
Locke Part #: M0559MFG Part #: M559 LF Compare
Pipe threads. Brass construction with flange.
M4249.jpg1/2" FIP or 3/4" MIP x 10" F.P.
Locke Part #: M4153MFG Part #: 455-10LF Compare
1/2" FIP / 3/4" MIP frost proof lawn faucet.
M4129.jpg1/2" FIP or 3/4" MIP x 10" F.P.
Locke Part #: M4120MFG Part #: 425-10LF Compare
With integral vacuum breaker and vandal-resistant vented cap.
M4129.jpg1/2" FIP or 3/4" MIP x 12" F.P.
Locke Part #: M4121MFG Part #: 425-12LF Compare
With integral vacuum breaker and vandal-resistant vented cap.
M4249.jpg1/2" FIP or 3/4" MIP x 12" F.P.
Locke Part #: M4154MFG Part #: 455-12LF Compare
1/2" FIP / 3/4" MIP frost proof lawn faucet.
M4249.jpg1/2" FIP or 3/4" MIP x 14" F.P.
Locke Part #: M4155MFG Part #: 455-14LF Compare
1/2" FIP / 3/4" MIP frost proof lawn faucet.
M4249.jpg1/2" FIP or 3/4" MIP x 8" F.P.
Locke Part #: M4152MFG Part #: 455-08LF Compare
1/2" FIP / 3/4" MIP frost proof lawn faucet.
M0525.jpg1/2" MIP x 1/2" C
Locke Part #: M0525MFG Part #: M525 Compare
Size: 4" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
M0525.jpg1/2" MIP x 1/2" C
Locke Part #: M0526MFG Part #: M526 Compare
Size: 6" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
M0525.jpg1/2" MIP x 1/2" C
Locke Part #: M0527MFG Part #: M527 Compare
Size: 8" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
M0525.jpg1/2" MIP x 1/2" C
Locke Part #: M0528MFG Part #: M528 Compare
Size: 10" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
M0525.jpg1/2" MIP x 1/2" C
Locke Part #: M0529MFG Part #: M529 Compare
Size: 12" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
M0525.jpg1/2" MIP x 1/2" C
Locke Part #: M0530MFG Part #: M530 Compare
Size: 14" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
WOG: 125 Lead Free Forged Brass, 125 WOG , Hose Bibb-Male, Ball Valve Type, Hose x MIP 1/2" and 3/4", 1/2" MIP x 1/2" Solder Inlet
Length: 10” Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 4, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 10” Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 4, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 10” Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 2 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
Length: 10" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 2 Gray Handle, Integral Cast Back flange, Wide screw holes easily secure mounting screws, Solid Brass Body and Seat, Machined Spout Aligning Mark, Stainless Steel Handle Screw, Satin Nickel Plated Body maintains attractive finish, Easy grip polycarbonate operating handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Spacer Wedge, Standard OO Size Seat Washer, Field repairable with no special tools, Option of Grey or Beige Handle
Length: 12" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 5, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 12" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 5, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 12" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 3 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
Length: 12" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 3 Gray Handle, Integral Cast Back flange, Wide screw holes easily secure mounting screws, Solid Brass Body and Seat, Machined Spout Aligning Mark, Stainless Steel Handle Screw, Satin Nickel Plated Body maintains attractive finish, Easy grip polycarbonate operating handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Spacer Wedge, Standard OO Size Seat Washer, Field repairable with no special tools, Option of Grey or Beige Handle
Length: 14" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 6, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 14" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 6, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 4" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 1, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 4" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 1, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 6" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 2, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 6" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 2, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 8" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 3, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 8" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 3, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 8" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 1 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
Length: 8" Insertion, Inlet Size: 1/2" MPT x 1/2" SWT, Catalog Sequence: 1 Gray Handle, Integral Cast Back flange, Wide screw holes easily secure mounting screws, Solid Brass Body and Seat, Machined Spout Aligning Mark, Stainless Steel Handle Screw, Satin Nickel Plated Body maintains attractive finish, Easy grip polycarbonate operating handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Spacer Wedge, Standard OO Size Seat Washer, Field repairable with no special tools, Option of Grey or Beige Handle
M0938.jpg1/2" Rough Brass Hose Bibb
Locke Part #: M0938MFG Part #: 24P-RB-WH Compare
M0938.jpg1/2" Rough Chrome Hose Bibb
Locke Part #: M0939MFG Part #: 24P 1/2 R CHR WH Compare
Literature_HeaderImage-1-2000x550_c.jpg1/2" SILL COCK USA
Locke Part #: M0579MFG Part #: 108-053HC Compare
Female IP, regular pattern.
M4129.jpg1/2" Sweat or 1/2" MIP x 10" F.P
Locke Part #: M4132MFG Part #: 426-0BLF Compare
With integral vacuum breaker and vandal-resistant vented cap.
M4129.jpg1/2" Sweat or 1/2" MIP x 12" F.P.
Locke Part #: M4133MFG Part #: 426-12LF Compare
With integral vacuum breaker and vandal-resistant vented cap.
M4129.jpg1/2" Sweat or 1/2" MIP x 14" F.P.
Locke Part #: M4134MFG Part #: 426-14LF Compare
With integral vacuum breaker and vandal-resistant vented cap.
M4129.jpg1/2" Sweat or 1/2" MIP x 4" F.P.
Locke Part #: M4129MFG Part #: 426-04LF Compare
With integral vacuum breaker and vandal-resistant vented cap.
M4129.jpg1/2" Sweat or 1/2" MIP x 6" F.P.
Locke Part #: M4130MFG Part #: 426-06LF Compare
With integral vacuum breaker and vandal-resistant vented cap.
M4138.jpg1/2" SWT or 1/2" M.I.P. x 10"
Locke Part #: M4142MFG Part #: 486-10LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" SWT or 1/2" M.I.P. x 12"
Locke Part #: M4143MFG Part #: 486-12LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" SWT or 1/2" M.I.P. x 14"
Locke Part #: M4144MFG Part #: 486-14LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" SWT or 1/2" M.I.P. x 2"
Locke Part #: M4138MFG Part #: 486-02LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" SWT or 1/2" M.I.P. x 4"
Locke Part #: M4139MFG Part #: 486-04LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" SWT or 1/2" M.I.P. x 6"
Locke Part #: M4140MFG Part #: 486-06LF Compare
Integral vacuum breaker & self draining features.
M4138.jpg1/2" SWT or 1/2" M.I.P. x 8"
Locke Part #: M4141MFG Part #: 486-08LF Compare
Integral vacuum breaker & self draining features.
M0790.jpg1/2" x 10" F.P. Sillcock
Locke Part #: M0790MFG Part #: SILLCOCK Compare
Provides the same non-freezing quality of our standard model, while assuring protection against back siphoning.
M0790.jpg1/2" x 12" F.P. Sillcock
Locke Part #: M0791MFG Part #: M791 Compare
Provides the same non-freezing quality of our standard model, while assuring protection against back siphoning.
M0790.jpg1/2" x 14" F.P. Sillcock
Locke Part #: M0792MFG Part #: M792 Compare
Provides the same non-freezing quality of our standard model, while assuring protection against back siphoning.
M4129.jpg1/2"Sweat or 1/2" MIP x 8" F.P.
Locke Part #: M4131MFG Part #: 426-08LF Compare
With integral vacuum breaker and vandal-resistant vented cap.
Length: 10” Insertion, Inlet Size: 1” MPT x 3/4” FPT, Catalog Sequence: 1, Hose Thread Outlet: 3/4” Garden Hose High flow rate, independent 3rd party tested to flow 19 gallons per minute at 25 PSI differential., Heavy pattern cast brass hydrant for use with or without brass or satin nickel box, Simple, solderless design and solid non-ferrous operating rod for long wear life., Satin nickel plated body retains original finish for years., Heavy duty brass piping, significantly stronger than ordinary copper tubing, with threaded and sealed joints., Patented PRIER Triple Seal positive shutoff system offers triple redundancy to assure shutoff., Both, 3/4 and 1 hose threads meet ASSE 1019 or ASSE 1052 & CSA B64.2 standards, listed at ASSE, CSA and IAPMO, Patented PRIER quick opening and modulating design require less force and fewer turns to operate., Vacuum breaker operates at lower differential and features self-cleaning design to prevent clogging., Design enables valve to be easily secured to any type of inner wall, utilizing the provided clamping ring., Single hole design assists in installation, the product is ideal for tilt-up construction, stone fronts or metal buildings, Multiple vent holes ensure proper draining and reduce problems associated with insect nesting.
Length: 12" Insertion, Inlet Size: 1” MPT x 3/4” FPT, Catalog Sequence: 2, Hose Thread Outlet: 3/4” Garden Hose High flow rate, independent 3rd party tested to flow 19 gallons per minute at 25 PSI differential., Heavy pattern cast brass hydrant for use with or without brass or satin nickel box, Simple, solderless design and solid non-ferrous operating rod for long wear life., Satin nickel plated body retains original finish for years., Heavy duty brass piping, significantly stronger than ordinary copper tubing, with threaded and sealed joints., Patented PRIER Triple Seal positive shutoff system offers triple redundancy to assure shutoff., Both, 3/4 and 1 hose threads meet ASSE 1019 or ASSE 1052 & CSA B64.2 standards, listed at ASSE, CSA and IAPMO, Patented PRIER quick opening and modulating design require less force and fewer turns to operate., Vacuum breaker operates at lower differential and features self-cleaning design to prevent clogging., Design enables valve to be easily secured to any type of inner wall, utilizing the provided clamping ring., Single hole design assists in installation, the product is ideal for tilt-up construction, stone fronts or metal buildings, Multiple vent holes ensure proper draining and reduce problems associated with insect nesting.
Length: 14" Insertion, Inlet Size: 1” MPT x 3/4” FPT, Catalog Sequence: 3, Hose Thread Outlet: 3/4” Garden Hose High flow rate, independent 3rd party tested to flow 19 gallons per minute at 25 PSI differential., Heavy pattern cast brass hydrant for use with or without brass or satin nickel box, Simple, solderless design and solid non-ferrous operating rod for long wear life., Satin nickel plated body retains original finish for years., Heavy duty brass piping, significantly stronger than ordinary copper tubing, with threaded and sealed joints., Patented PRIER Triple Seal positive shutoff system offers triple redundancy to assure shutoff., Both, 3/4 and 1 hose threads meet ASSE 1019 or ASSE 1052 & CSA B64.2 standards, listed at ASSE, CSA and IAPMO, Patented PRIER quick opening and modulating design require less force and fewer turns to operate., Vacuum breaker operates at lower differential and features self-cleaning design to prevent clogging., Design enables valve to be easily secured to any type of inner wall, utilizing the provided clamping ring., Single hole design assists in installation, the product is ideal for tilt-up construction, stone fronts or metal buildings, Multiple vent holes ensure proper draining and reduce problems associated with insect nesting.
M0677.jpg10" Comm. Hydrant, Key T0044
Locke Part #: M0680MFG Part #: 65-P 10" Compare
M0313.jpg10" Copper Wall Hydrant
Locke Part #: M0646MFG Part #: 17C-10-MH Compare
Combination 1/2" Male Pipe Thread & 1/2" Female Copper Water Tube Inlet. Metal Handle. 1/2" MIP x 1/2" FIP.
M0541.jpg10" Freezeless Wall Faucet
Locke Part #: M0541MFG Part #: 25CP-10" Compare
M0313.jpg10" Wall Hydrant
Locke Part #: M0540MFG Part #: 17CP-10-MH Compare
Combination 1/2" Male Pipe Thread & 1/2" Female Copper Water Tube Inlet. Metal Handle. 1/2" MIP x 1/2" FIP.
M0313.jpg10" Wall Hydrant 1/2" Pex Tube insert
Locke Part #: M4213MFG Part #: 17PX-10 Compare
Combination 1/2" Male Pipe Thread & 1/2" Female Copper Water Tube Inlet. Metal Handle. 1/2" MIP x 1/2" FIP.
Combination 1/2" Male Pipe Thread & 1/2" Female Copper Water Tube Inlet. Metal Handle. 1/2" MIP x 1/2" FIP.
M4249.jpg12" 1/2"SWT or 1/2"MIP
Locke Part #: M4258MFG Part #: 476-12LF Compare
WILL NOT BURST, the water may freeze but they will not burst.
M0677.jpg12" Comm. Hydrant, Key T0044
Locke Part #: M0681MFG Part #: 65-P 12" Compare
M0541.jpg12" Freezeless Wall Faucet
Locke Part #: M0542MFG Part #: 25CP-12" Compare
Push & Turn hot water handle for safety. Faucet drains automatically when hose is removed.
Push & Turn hot water handle for safety. Faucet drains automatically when hose is removed.
M0313.jpg12" Wall Hydrant
Locke Part #: M0545MFG Part #: 17CP-12-MH Compare
Combination 1/2" Male Pipe Thread & 1/2" Female Copper Water Tube Inlet. Metal Handle. 1/2" MIP x 1/2" FIP.
M4249.jpg14" 1/2"FIP or 3/4"MIP
Locke Part #: M4253MFG Part #: 475-14LF Compare
WILL NOT BURST, the water may freeze but they will not burst.
M4249.jpg14" 1/2"SWT or 1/2"MIP
Locke Part #: M4259MFG Part #: 476-14LF Compare
WILL NOT BURST, the water may freeze but they will not burst.
M0677.jpg14" Comm. Hydrant, Key T0044
Locke Part #: M0682MFG Part #: 65-P-14" Compare
Size: 3", MFG#: PFC2 Insulates outdoor faucets and protects from wind chill, Installs with no tools or drilling, Includes all mounting hardware and instructions, Helps deter tampering with outside faucets, Improves aesthetics of any building, even in warm climates
646.jpg3/4" Brass Hose Bibb
Locke Part #: M0492MFG Part #: M492 LF Compare
Lead Free Forged Brass, 125 WOG , Hose Bibb-Male, Ball Valve Type, Hose x MIP 1/2" and 3/4", 1/2" MIP x 1/2" Solder Inlet
M0525.jpg3/4" MIP x 1/2" FIP
Locke Part #: M0535MFG Part #: M535LF Compare
Size: 8" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
M0525.jpg3/4" MIP x 1/2" FIP
Locke Part #: M0536MFG Part #: M536LF Compare
Size: 10" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
M0525.jpg3/4" MIP x 1/2" FIP
Locke Part #: M0537MFG Part #: M537 Compare
Size: 12" Bronze and copper. Satin nickel exterior with chrome barrel. Lock shield cap. Brass operating rod. Cast bronze raised seat.
Length: 10” Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 10, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 10” Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 10, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 10" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 1, Operator: Handle Operated Horizontal or Vertical installation with same product, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Internal checks to prevent thermal migration, 3-1/2 Centre-to-Centre-installation template provided, Enclosed Screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, Lock Shield Cap for stronger valve design, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machine Spout Aligning Mark
Length: 12" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 12, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 12" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 11, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 12" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 2, Operator: Handle Operated Horizontal or Vertical installation with same product, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Internal checks to prevent thermal migration, 3-1/2 Centre-to-Centre-installation template provided, Enclosed Screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, Lock Shield Cap for stronger valve design, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machine Spout Aligning Mark
Length: 14" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 13, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 14" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 12, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 4" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 7, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 4" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 7, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 6" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 8, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 6" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 8, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
Length: 8" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 9, Operator: Handle Operated Anti-Siphon Vacuum Breaker with Backflow Check Valve, Integral Cast Flange with built-in drainage pitch, Enclosed screw holes easily secure mounting screws, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Powder Coated Cast Aluminium Handle, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, Slim seat inlet designed for easier installation, ASSE 1019-C Approved, IAPMO/UPC Approved, File Number 4326,, Lock Shield Cap for stronger valve design
Length: 8" Insertion, Inlet Size: 3/4" MIP x 1/2" FIP, Catalog Sequence: 9, Operator: Handle Operated Quarter-Turn Easy Operation, Soft-Grip Coated Cast Aluminum Handle, Integral Cast Flange with built-in drainage pitch, Lock Shield Cap for stronger valve design, Anti-Siphon Vacuum Breaker with Backflow Check Valve, Enclosed screw holes easily secure mounting screws,, Solid Brass Body, Valve Stem Cap, Seat and Stem Ends, Satin Nickel Plated Body maintains attractive finish, Stainless Steel Seat Washer Screw & Handle Screw, Durable ACME Threads secure Stem at Seat End, AFG Teflon with Graphite Packing for easy maintenance, Standard OO Size Seat Washer, Machined Spout Aligning Mark, Cycle Tested to 250,000 Cycles, ASSE/IAPMO/C-UPC Approved
M0938.jpg3/4" Polished Chrome Hose Bib
Locke Part #: M0984MFG Part #: 24P 3/4 POL CHROME Compare
M0938.jpg3/4" R Chrome Plated Hose Bib
Locke Part #: M0983MFG Part #: 24P 3/4 R CHROME PLTD Compare
Literature_HeaderImage-1-2000x550_c.jpg3/4" SILL COCK B & K
Locke Part #: M0580MFG Part #: 108-054HN Compare
Female IP, regular pattern.
Connection: 3/4" FHT x 1/2" FPT LEAD FREE
Dimensions: 3/4" x 1/2" LEAD FREE
Connection: 3/4" MHT x 3/4" MHT (1/2" FIP tap) LEAD FREE
Connection: 3/4" FHT x 3/4" FHT LEAD FREE
Length: 12" Insertion, Inlet Size: 3/4” MPT x 1/2” FPT, Catalog Sequence: 6 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
Length: 8" Insertion, Inlet Size: 3/4” MPT x 1/2” FPT, Catalog Sequence: 4 ASSE 1019 & UPC Listed & Labelled., Internal Vacuum Breaker & Backflow Preventor., Integral Cast Back flange., Wide screw holes easily secure mounting screws., Siding Wedge included with each valve., Satin Nickel Plated Body maintains finish indefinitely., Easy Grip polycarbonate operating Handle., Stainless Steel Handle Screw, Easy Half-Turn Operation, Full Circle Seat Threads secure Stem to Seat End., AFG Teflon & Graphite Packing for easy maintenance., Each Valve air-tested at Factory for leak free quality., Machined Spout Aligning Mark Solid Brass Body and Seat.
Product Image Not Available3/4 Female Hose Adaptors (FIP End)
Locke Part #: H0652MFG Part #: HU11-12-12X Compare
Size: 3/4” F.I.P x 3/4” Female Hose Thread, Finish: Rough, Operating Temperature: -35°- 100° F, Working Pressure: 75 psi maximum, intermittent to 150 psi
Product Image Not Available3/4 Female Swivel Hose Adaptors (FIP End)
Locke Part #: H0645MFG Part #: HUS11-12-12X Compare
Size: 3/4” Female Hose Thread (swivel) x 3/4" F.I.P, Finish: Rough, Operating Temperature: -35°- 100° F, Working Pressure: 75 psi maximum, intermittent to 150 psi For use with residential and commercial grade garden hose., All female hose thread connections require a rubber washer (sold separately) inserted prior to installation
Product Image Not Available3/4 Male Hose Adaptors (MIP End)
Locke Part #: H0651MFG Part #: HU22-12-12TPX Compare
Size: 3/4” Male Hose Thread x 3/4" M.I.P, Finish: Rough, Operating Temperature: -35°- 100° F, Working Pressure: 75 psi maximum, intermittent to 150 psi For use with residential and commercial grade garden hose., All female hose thread connections require a rubber washer (sold separately) inserted prior to installation
M0541.jpg34HA Brass Vacuum Breaker for #25 Wall Hydrant
Locke Part #: M0317MFG Part #: 34HA-BR Compare
M0938.jpg34HF Brass Vacuum Breaker for M0938-M0939
Locke Part #: M0937MFG Part #: 34-HF BRASS Compare
M4249.jpg4" 1/2"SWT or 1/2"MIP
Locke Part #: M4254MFG Part #: 476-04LF Compare
WILL NOT BURST, the water may freeze but they will not burst.
M0677.jpg4" Comm. Hydrant, Key T0044
Locke Part #: M0677MFG Part #: 65-P X 4" Compare
M4222.jpg464-10" 1/2" Shark Bite
Locke Part #: M4263MFG Part #: 464-10 Compare
M4222.jpg464-12" 1/2" Shark Bite
Locke Part #: M4264MFG Part #: 464-12 Compare
M4222.jpg464-8" 1/2" Shark Bite
Locke Part #: M4262MFG Part #: 464-08 Compare
M4222.jpg465-10" 1/2" FIP or 3/4" MIP
Locke Part #: M4223MFG Part #: 465-10QTLF Compare
M4222.jpg465-12" 1/2" FIP or 3/4" MIP
Locke Part #: M4224MFG Part #: 465-12QTLF Compare
M4222.jpg465-14" 1/2" FIP or 3/4" MIP
Locke Part #: M4225MFG Part #: 465-14QTLF Compare
M4222.jpg465-8" 1/2" FIP or 3/4" MIP
Locke Part #: M4222MFG Part #: 465-08QTLF Compare
M4222.jpg466-12" 1/2" Sweat or 1/2" MIP
Locke Part #: M4230MFG Part #: 466-12QTLF Compare
M4222.jpg466-14" 1/2" Sweat or 1/2" MIP
Locke Part #: M4231MFG Part #: 466-14QTLF Compare
M4222.jpg466-2" 1/2" Sweat or 1/2" MIP
Locke Part #: M4232MFG Part #: 466-02QTLF Compare
M4222.jpg466-4" 1/2" Sweat or 1/2" MIP
Locke Part #: M4226MFG Part #: 466-04QTLF Compare
M4222.jpg466-8" 1/2" Sweat or 1/2" MIP
Locke Part #: M4228MFG Part #: 466-08QTLF Compare
a222.jpg5/8 x 50’ Vinyl Garden Hose
Locke Part #: M2900MFG Part #: A222 Compare
Length: 50’, Inside Diameter: 5/8"
M4138.jpg59BFPC Vac Breaker
Locke Part #: M0589MFG Part #: 59BFPCHR Compare
Integral vacuum breaker & self draining features.
M4249.jpg6" 1/2"FIP or 3/4"MIP
Locke Part #: M4249MFG Part #: 475-06LF Compare
WILL NOT BURST, the water may freeze but they will not burst.
M0677.jpg6" Comm. Hydrant, Key T0044
Locke Part #: M0678MFG Part #: 65-P 6" Compare
M0677.jpg8" Comm. Hydrant, Key T0044
Locke Part #: M0679MFG Part #: 65-P 8" Compare
M0313.jpg8" Wall Hydrant
Locke Part #: M0538MFG Part #: 17CP-8-MH Compare
Combination 1/2" Male Pipe Thread & 1/2" Female Copper Water Tube Inlet. Metal Handle. 1/2" MIP x 1/2" FIP.
Catalog Sequence: 17
Weight: 1.12 lbs, Width: 2.75", Depth: 2", Model Length: 10, Full Length: 15", Inlet Connection: 1/2” Sweat or 1/2” MIP
Weight: 0.9 lbs, Width: 2.75", Depth: 2", Model Length: 4, Full Length: 9", Inlet Connection: 1/2” Sweat or 1/2” MIP
Weight: 1.05 lbs, Width: 2.75", Depth: 2", Model Length: 8, Full Length: 13', Inlet Connection: 1/2” Sweat or 1/2” MIP
M4249.jpgBackflow assembly for 455BFP
Locke Part #: M4166MFG Part #: PK1370 Compare
1/2" FIP / 3/4" MIP frost proof lawn faucet.
M4169.jpgBackflow Check Valve For Quarter-Turn Wall Hydrant
Locke Part #: M4169MFG Part #: 336-0002 Compare
Catalog Sequence: 14
Chrome plated brass, LEAD FREE
g20051.jpgGarden Hose Shut-Off, Dual Shut-Off, Green ABS
Locke Part #: M4023MFG Part #: G20051 Compare
Cast brass, Buna-N seals
g20053.jpgGarden Hose Shut-Off, Shut-Off Y, Brass Hose
Locke Part #: M4024MFG Part #: G20 053 Compare
Green ABS plastic body and ball, Buna-N seals
Finish: Satin Nickel Plated, Catalog Sequence: 4
M4188.jpgLoose Key Conversion Kit
Locke Part #: M4188MFG Part #: C-134KT-804 Compare
Catalog Sequence: 16
M0541.jpgMetal Handle, Model 25
Locke Part #: M0314MFG Part #: 30239 Compare
Length: Up to 18-1/16”, Catalog Sequence: 2
M4197.jpgOval Handle & Screw Kit For C-144 Anti-Siphon Hydrants
Locke Part #: M4197MFG Part #: C-134KT-805 Compare
Catalog Sequence: 18
M4168.jpgOval Handle & Screw Kit For Quarter-Turn Wall Hydrant
Locke Part #: M4168MFG Part #: P-164KT-805 Compare
Catalog Sequence: 13
Catalog Sequence: 15
Catalog Sequence: 1
Product Image Not AvailablePK-2008 8" Stem For M4152
Locke Part #: M4162MFG Part #: PK2008 Compare
Product Image Not AvailablePK-2010 10" Stem For M4153
Locke Part #: M4163MFG Part #: PK2010 Compare
Product Image Not AvailablePK-2012 12" Stem For M4154
Locke Part #: M4164MFG Part #: PK2012 Compare
Product Image Not AvailablePK-2014 14" Stem For M4155
Locke Part #: M4165MFG Part #: PK2014 Compare
Product Image Not AvailablePK2004 4" Stem For M4129
Locke Part #: M4160MFG Part #: PK2004 Compare
Product Image Not AvailablePK2006 6" Stem For M4130
Locke Part #: M4161MFG Part #: PK2006 Compare
Product Image Not AvailablePK6002 2" Stem For M4232
Locke Part #: M4266MFG Part #: PK6002 Compare
Product Image Not AvailablePK6004 4" Stem For M4226,M4260
Locke Part #: M4267MFG Part #: PK6004 Compare
Product Image Not AvailablePK6006 6" Stem For M4227,M4261
Locke Part #: M4268MFG Part #: PK6006 Compare
Product Image Not AvailablePK6008 8" Stem For M4222. M4228.M4262
Locke Part #: M4269MFG Part #: PK6008 Compare
Product Image Not AvailablePK6010 10" Stem For M4223, M4229, M4263
Locke Part #: M4270MFG Part #: PK6010 Compare
Product Image Not AvailablePK6014 14" Stem For M4225, M4231, M4265
Locke Part #: M4272MFG Part #: PK6014 Compare
Product Image Not AvailablePK8002 2" Stem For M4138
Locke Part #: M4276MFG Part #: PK8002 Compare
Product Image Not AvailablePK8004 4" Stem For M4139
Locke Part #: M4277MFG Part #: PK8004 Compare
Product Image Not AvailablePK8006 6" Stem For M4140
Locke Part #: M4278MFG Part #: PK8006 Compare
Product Image Not AvailablePK8008 8" Stem For M0590, M4141, M4152
Locke Part #: M4279MFG Part #: PK8008 Compare
Product Image Not AvailablePK8010 10" Stem For M0591, M4142, M4153
Locke Part #: M4280MFG Part #: PK8010 Compare
Product Image Not AvailablePK8012 12" Stem For M0592, M4143, M4154
Locke Part #: M4281MFG Part #: PK8012 Compare
Product Image Not AvailablePK8014 14" Stem For M0593, M4144, M4155
Locke Part #: M4282MFG Part #: PK8014 Compare
Catalog Sequence: 4
Color: Green
M4189.jpgSeat Washer Replacement Kit- 00 Beveled
Locke Part #: M4189MFG Part #: C-134KT-802 Compare
Catalog Sequence: 17
M1951.jpgSill Faucet 1/2" FIP x 3/4"
Locke Part #: M1951MFG Part #: 255LF Compare
M1950.jpgSill Faucet Anti-Syphon 1/2" FIP x 3/4"
Locke Part #: M1950MFG Part #: 255BFPLF Compare
With integral vacuum breaker and vandal-resistant vented cap.
Catalog Sequence: 1, Remark: Part is existing in 2 categories in binder
Length: Up to 16-7/8" OAL, Catalog Sequence: 14
M0938.jpgTan Wheel Handle For M0938-M0939
Locke Part #: M0940MFG Part #: 30233 Compare
M0938.jpgTee Key Handle for M0938-M0939
Locke Part #: M0669MFG Part #: 50009 RK-STK Compare
M0790.jpgVacuum Breaker For M0790, M0791, & M0792
Locke Part #: M1790MFG Part #: VAC BRKR F/ SILLCOCK LF Compare
Provides the same non-freezing quality of our standard model, while assuring protection against back siphoning.
With integral vacuum breaker and vandal-resistant vented cap.
Catalog Sequence: 1, Remark: Part is existing in 2 categories in binder