Loading ...

Loading ...

Search in: Relief Valve, Balance Valves & Hammer Arrestors Category

tempera-pressure-balancing-valve.jpg1/2" FIP Inlet & Discharge
Locke Part #: M0565MFG Part #: TRB-2 Compare
Automatic pressure compensating, preventing thermal shock, Can be used with single or tow handle mixing valve assemblies, Meets A.S.S.E. STANDARD 1066 individual in-line pressure balancing valves, Holds a selected water temperature to within +- 3 F degree regardless of pressure change, Fully ported valve with minimal pressure drop, Safe and positive because it is a pressure balancing valve, not a thermostatic mixing valve, Construction Details:, External:, Red-Bronze cast body containing over 85% ingot copper. ASTM # B584 Alloy# C84400., Internal:, Stainless steel (# 303) is used in the piston and sleeve.
M1730.jpg1/2" PEX Crimp Tee ASTM F 1807
Locke Part #: M1930MFG Part #: 660-GTX2B Compare
ANSI/ ASSE 1010-2004, Factory tested to withstand 500,000 cycles (654-C tested), Allows for installation in 2 4 wall cavity,, Installs at any angle, ASSE 1010 certified as a water hammer arrester that is designed to provide Continuous protection, without aintenance allowing the Hydra-Rester to be installed without access panels
E0305.jpg3/4" C x C Expansion Relief Valve
Locke Part #: E0305MFG Part #: 78RV226125 Compare
3/4" Brass water heater ball valves with 125 Lb. P.S.I. Thermo expansion Relief Valve. Combination 1/2" Copper, sweat & 1/2" threaded outlet fitting on relief valve.
E0305.jpg3/4" FIP x FIP Expansion Relief Valve
Locke Part #: E0306MFG Part #: 78RV116125 Compare
3/4" Brass water heater ball valves with 125 Lb. P.S.I. Thermo expansion Relief Valve. Combination 1/2" Copper, sweat & 1/2" threaded outlet fitting on relief valve.
Overall Length: 6-7/8, Temperature Range: -40°F to +212°F(-4.4°C to +100°C), Size (NPT): 3/4" Male X Female Swivel Hose, Normal Operating Pressure: 35 to 125 PSIG, Max Spike Pressure: 250 PSIG 3/4" Male x Female Swivel Hose, Only One Moving Part, Maintenance FREE, Construction:, Cap:, Machined of free turning brass, attached to barrel with 95-5 solder, Piston:, Machined of C 96300 Low Lead Brass, Seals:, EPDM, Seal Lubricant:, Dow-Corning Silicone Compound #111, FDA listed for use in potable water systems, Nickel Plated:, For Salt Water Application
M1730.jpg3/8 OD Female Comp Tee Lead Free
Locke Part #: M1731MFG Part #: 660-GTR1B Compare
Case Qty: 16, Width: 1-3/8", Length: 8-3/4", Connection Size: 3/4", Pipe Size: 653-B, Pack: Bulk, Min Qty: 1, Volume (cu in): 7, Fixture Unit Value: 12–32, Country of Origin: US, Weight: 0.791, Volume: 0.251, Mfg Standards/Approvals: ANSI/ASSE 1010 2004, Body Material: Copper, Dimensions: 8-3/4 x 1-3/8 in, Domestic/Import: Domestic, End Style: MNPT Thread, Nominal Size: 3/4 in, Pressure Rating: 350 psi, Series: 650, Softgoods Material: EPDM O-Ring, Temperature Rating: 250 deg F
Case Qty: 50, Overall Height: 5-1/4", Connection Size: 1/2", Pack: Bulk, Min Qty: 50, Volume (cu in): 1.4, Fixture Unit Value: 1–4, Max Working Temperature: 250°F, Arrester size: AA, Chamber Width: 7/8", Max Working Pressure: 350 PSIG, Burst Tested: to 1,500 PSIG
M1131.jpgThermostatic Mixing Valve
Locke Part #: M1131MFG Part #: 0204143 Compare
Maximum Pressure:, 150psi, Accurate within +/-3 F, Temperature Range:, 80 F to 120 F. ASSE 1016 listed.
Case Qty: 16, Width: 1-3/8", Length: 10", Connection Size: 3/4", Pipe Size: 653-BS, Pack: Bulk, Min Qty: 1, Volume (cu in): 7, Fixture Unit Value: 12–32
Case Qty: 16, Width: 1-3/8", Length: 8-1/4", Connection Size: 1/2", Pipe Size: 652-AS, Pack: Bulk, Min Qty: 1, Volume (cu in): 5, Fixture Unit Value: 1–11
Case Qty: 16, Width: 1-3/8", Length: 6-1/2", Connection Size: 1/2", Pipe Size: 652-A, Pack: Bulk, Min Qty: 1, Volume (cu in): 5, Fixture Unit Value: 1–11
Case Qty: 16, Width: 1-3/8", Length: 8-3/4", Connection Size: 3/4", Pipe Size: 653-BX, Pack: Bulk, Min Qty: 1, Volume (cu in): 7, Fixture Unit Value: 12–32