Loading ...

Loading ...

Search in: Water Heaters Category

E0022.jpg#1- Bubbler Assembly With Lock Nut
Locke Part #: E0022MFG Part #: 92715C Compare
Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong, abrasion-resistant, anti-sweat. Keyed in location to prevent rotation.
E0021.jpg(#4) Regulator Cartridge
Locke Part #: E0021MFG Part #: 61313C Compare
E0021.jpg(#4A) Regulator Cart. For E0005 & E0012
Locke Part #: E0031MFG Part #: 61314C Compare
E0021.jpg(#6) Regulator Holder
Locke Part #: E0023MFG Part #: 92450C Compare
Size: 0.57” ID X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 18” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 24” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 24” connector with 3/4” M.I.P x 7/8” OD Compression end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braining, significantly increasing the flexibility of the connector, No kinking, No crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Won t work harden even with repeated bending, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, 100% compliant to California and Vermont low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply., Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
E0599.jpg1" 150lb. 3" Long Shank Relief Valve
Locke Part #: E0599MFG Part #: FVMX-3LS 150# Compare
1" 150lb. Long shank. AGA certified 500,000 btu/hr, ASME rated 2,155,000 btu/hr@150lb. For commercial hot water storage tanks.
E1134.jpg1" Sweat
Locke Part #: E1135MFG Part #: 50614W Compare
Eliminating leak paths in the system, Shortening installation times, Fight the increasing costs of raw materials with step and time saving innovation methods
Size: 1", Capacity: 750000 BTU/hr, Temperature: 210°F, Pressure Set Point: 150 psi, Stem: 4-3/4", Thread Type: Female
Pressure-Temperature, Maximum Temperature: 212 degrees F (100 degrees C), Maximum Working Pressure: 100 psi (6.9 bars), Adjustment, Range, : 10-25 psi (68.7 - 172.4 kPa) set at 15 psi (103.4 kPa)
E0048.jpg1/2" FIP Anti-Scald
Locke Part #: E0048MFG Part #: 0559116 Compare
E0320.jpg1/2" Pressure Reducing Backflow Preventer
Locke Part #: E0320MFG Part #: BFAC 1/2/ 23029-0014 Compare
E0050.jpg1/2" Tempering Valve
Locke Part #: E0050MFG Part #: 0559132 Compare
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
E0378.jpg1/4" Pilot Assembly Lighter
Locke Part #: E0423MFG Part #: 233-40248-08 Compare
E0378.jpg1/8" Natural Gas Pilot Assembly
Locke Part #: E0435MFG Part #: 233-40248-05 Compare
Length: 18", Inside Diameter: 1", End Connection Size: 1" FIP x 1" FIP, Temperature Rating: 40 - 250°F 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Round Gasket.jpg1-1/4" - 1-1/2" Flange Replacement Gasket
Locke Part #: E1173MFG Part #: 91130185 Compare
E1134.jpg1-1/4" Sweat
Locke Part #: E1136MFG Part #: 50615W Compare
Eliminating leak paths in the system, Shortening installation times, Fight the increasing costs of raw materials with step and time saving innovation methods
E1130.jpg1-1/4" Sweat
Locke Part #: E1132MFG Part #: 50415W Compare
Eliminating leak paths in the system, Shortening installation times, Exclusive purge & drain feature, 600 WOG 150 WSP, Prevents electrolysis and eliminates galvanic corrosion, Includes mounting bolts, nuts and an additional wing style T handle, Allows virtually no air into the system upon pump replacement, Fits most circulator pumps, Adjustable packing gland for lifetime protection, Threaded ends comply with ANSI B1.20.1, Solder ends comply with ANSI B16.18, Hose threads comply with B1.20.7, Quick quarter turn ball valve
Transformer.jpg120V Transformer for CC & CR Series
Locke Part #: E1403MFG Part #: BH1205006A Compare
E0113.jpg1500W 120V
Locke Part #: E0113MFG Part #: 265-42541-02 Compare
Sand and Lime Fighter Element For Flanged Elements:
E0114.jpg1500W 120V
Locke Part #: E0114MFG Part #: 265-42540-03 Compare
For Flanged Elements:
E0105.jpg1500W 120V
Locke Part #: E0105MFG Part #: 265-42540-02 Compare
For Flanged Elements:
Type: Ultra LWD, Qty: 12, Watts @ 120v: 1500w, Nominal Voltage: 120v, Min Tank Diameter: 9" Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
E0113.jpg1500W 240V
Locke Part #: E0055MFG Part #: 265-42545-13 Compare
Sand and Lime Fighter Element For Flanged Elements:
E0044.jpg2-1/2" Brass Valve
Locke Part #: E0042MFG Part #: 265-42351-04 Compare
243-45787-00.jpg3" Draft Hood
Locke Part #: E0535MFG Part #: 243-45787-00 Compare
Size: 3"
E0048.jpg3/4" FIP Anti-Scald
Locke Part #: E0049MFG Part #: 0559119 Compare
Brass FIP swivel nut includes EPDM gasket
Size: 3/4" FIP x 3/4" Uponor PEX-Barb x 18", Connections: FIP x PEX Barb, Inside Diameter: 3/4"
Size: 3/4" FIP x 3/4" Uponor PEX-Barb x 24", Connections: FIP x PEX Barb, Inside Diameter: 3/4"
E0375.jpg3/4" PEX x 3/4" FIP Swivel. 18"
Locke Part #: E1699MFG Part #: 633x18 Compare
Brass FIP swivel nut includes EPDM gasket
E1168.jpg3/4" Pex x Pex Ball Valve / Relief Valve
Locke Part #: E1168MFG Part #: 78RV996125 / N55601 Compare
Pressure Rated: 400psi. Relief Valve, Pressure Settings: 75, 80, 100 or 125psi.
E0579.jpg3/4" Relief valve,150 lb.
Locke Part #: E0579MFG Part #: 14737-0150 Compare
Can be used on Rinnai & other tankless water heaters. ASME rated, design certified by AGA; CGA listed. NPT male inlet x NPT female (drain) outlet. Pressure range: 150 psi. Standard setting.
E0102.jpg3/4" Shank T&P Valve
Locke Part #: E0102MFG Part #: 19783-0150 Compare
Thermostat has a thermobonded protective coating. This feature retards the accumulation of mineral deposits. A.S.M.E. rated, self-closing T&P relief valves for water heaters up to 100,000 BTU/hr.
E0047.jpg3/4" Sweat
Locke Part #: E0047MFG Part #: 24502-000 Compare
E1130.jpg3/4" Sweat
Locke Part #: E1130MFG Part #: 50413W Compare
Eliminating leak paths in the system, Shortening installation times, Exclusive purge & drain feature, 600 WOG 150 WSP, Prevents electrolysis and eliminates galvanic corrosion, Includes mounting bolts, nuts and an additional wing style T handle, Allows virtually no air into the system upon pump replacement, Fits most circulator pumps, Adjustable packing gland for lifetime protection, Threaded ends comply with ANSI B1.20.1, Solder ends comply with ANSI B16.18, Hose threads comply with B1.20.7, Quick quarter turn ball valve
E0096.jpg3/4" T&P Valve
Locke Part #: E0096MFG Part #: 16935-0150 Compare
E0100.jpg3/4" T&P Valve With 3" Probe,125 psi; Schools & Gov.
Locke Part #: E0101MFG Part #: 15914-0125 Compare
E0100.jpg3/4" T&P Valve With 3/4" Probe, 150 psi
Locke Part #: E0103MFG Part #: 16372-0150 Compare
E0100.jpg3/4" T&P Valve With 4" Probe, 150 psi Resident.
Locke Part #: E0100MFG Part #: 15836-0150 Compare
Product Image Not Available3/4" T & P Nipple Extender, 2" Total Long
Locke Part #: E0485MFG Part #: 229-19100-00 Compare
Size: 3/4", Length: 2"
Size: 3/4", Capacity: 105000 BTU/hr, Temperature: 210°F, Pressure Set Point: 150 psi, Stem: 4", Thread Type: Female
E0050.jpg3/4" Tempering Valve
Locke Part #: E0051MFG Part #: 0559136 Compare
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
E0047.jpg3/4" Threaded
Locke Part #: E0097MFG Part #: 24511-0000 Compare
E0083.jpg3/4" Vacuum relief
Locke Part #: E0083MFG Part #: 0556031 Compare
F0580.jpg3/4" x 3" Dielectric Nipple
Locke Part #: F0580MFG Part #: 1995C Compare
Length (in): 12, Item: E0371, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 15, Item: E0372, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 18, Item: E0373, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 24, Item: E0374, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 18, Item: E0376, End Connection Size: 3/4” FIP x 7/8” Copper Sweat, Temperature Rating: 35° - 250° F, ID (in): 3/4, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 24, Item: E0377, End Connection Size: 3/4” FIP x 7/8” Copper Sweat, Temperature Rating: 35° - 250° F, ID (in): 3/4, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length: 18", Connections: 1″ FIP x 7/8″ O.D
WB00-12N.jpg3/4FIP X 3/4FIP X12 COPPER WHC
Locke Part #: L0958MFG Part #: WB00-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
WB07-18.jpg3/4FIP X 3/4PEX X18 COPPER WHC
Locke Part #: L0008MFG Part #: WB07-18 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 18, Quantity: 25, Weight (LBS): 20.1 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection
WB07-24_STD.jpg3/4FIP X 3/4PEX X24 COPPER WHC
Locke Part #: L0006MFG Part #: WB07-24 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 24, Quantity: 25, Weight (LBS): 16.5 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection
WB034-12N.jpg3/4FIP X3/4NOM M/FSWT X12 CPR
Locke Part #: L0009MFG Part #: WB034-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
WB034-18N.jpg3/4FIP X3/4NOM M/FSWT X18 CPR
Locke Part #: L0011MFG Part #: WB034-18N Compare
Size: 7/8” OD X 18” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
WB034-24N.jpg3/4FIP X3/4NOM M/FSWT X24 CPR
Locke Part #: L0012MFG Part #: WB034-24N Compare
Size: 7/8” OD X 24” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
E0105.jpg3500W 240V
Locke Part #: E0112MFG Part #: 265-42545-12 Compare
For Flanged Elements:
E0807.jpg37C72U-706 LPG 1-3/8"
Locke Part #: E0809MFG Part #: 265-46182-01 Compare
E0807.jpg37C73U-704 NG 1-3/8"
Locke Part #: E0807MFG Part #: 265-46181-01 Compare
229-39625-25.jpg43-1/2" Dip Tube with 3" Nipple, Polypropylene
Locke Part #: E0874MFG Part #: 229-51230-21 Compare
Length: 43-1/2", Nipple Size: 3"
224-47776-06.jpg44" Magnesium Anode Rod with 2" Nipple
Locke Part #: E0409MFG Part #: 224-47776-06 Compare
Material: Magnesium, Length: 44"
E0114.jpg4500W 240V
Locke Part #: E0115MFG Part #: 265-51333-09 Compare
For Flanged Elements:
E0113.jpg4500W 240V
Locke Part #: E0056MFG Part #: 265-51328-07 Compare
Sand and Lime Fighter Element For Flanged Elements:
Type: Ultra LWD, Qty: 6, Nominal Voltage: 240v, Min Tank Diameter: 15", Watts @ 240v: 4500w, Watts @ 208v: 3500w Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
Features, :, 1-3/8" thread screw-in style, For the State Industries manufactured Duron tank water heaters, Also used in Sears Duron tank water heaters
WaterFlowMeter.jpg5/8" x 3/4" Water Meter Lead Free
Locke Part #: M4545MFG Part #: WM-75 5/8" X 3/4" Compare
Dimension: 5/8"x3/4", Weight (lbs): 4.25, Flow Rating (gpm): 20, Continuous Flow (gpm): 10, Normal Flow Range (gpm): 1-20, Low Flow (gpm @ > 97%): 1/4, Extended Low Flow (gpm @ > 95%): 1/8, Maximum Working Pressure (psi): 150, Maximum Working Temperature (°F): 105, Specific Displacement (revs/gallon): 56.4/1, Headloss at Maximum Flow Rate (psi): 6.5, Length (A ): 7.5", Width (B ): 3-13/16", Height Standard Register with lid (C ): 5-3/8", Height Bottom to Center Line (D): 1-5/8", Packed To Carton: 6, Carton Weight (lbs): 30 Hermetically sealed dry dial protected from the elements, won't discolor or fade, Proven multi-jet water meter design, Connections are external non-tapered meter threading (comes with Male NPT thread adapters), Integral strainer in measuring chamber protects measuring components from foreign debris., Tempered glass lens for continued readability., Hinged lens cover to protect lens and register from damage. Magnetic drive to eliminate potential leak point., Easy to read register display with large clear digits., Odometer measures in gallons up to 9,999,999(99,999,999 for WM150/200).
229-39625-25.jpg55" Diptube with Heat Trap, 2" Nipple, Polypropylene
Locke Part #: E0886MFG Part #: 229-45031-01 Compare
Size: 1", Length: 55", Nipple Size: 2-1/2"
E0105.jpg5500W 240V
Locke Part #: E0107MFG Part #: 265-42544-11 Compare
For Flanged Elements:
E0113.jpg5500W 240V
Locke Part #: E0108MFG Part #: 265-42545-09 Compare
Sand and Lime Fighter Element For Flanged Elements:
Type: Ultra LWD, Qty: 12, Nominal Voltage: 240v, Min Tank Diameter: 15", Watts @ 240v: 5500w, Watts @ 208v: 4125w Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
Size: 6", Use With: D100T199-3N
E0113.jpg6000W 208V No Gasket Included Order E0706
Locke Part #: E0173MFG Part #: 220-42543-03 Compare
Sand and Lime Fighter Element For Flanged Elements:
Length: 14.81", Volts: 208, Watts: 6000W
Size: 7/8” OD X 18” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
Size: 7/8” OD X 24” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
Product Image Not Available8" Flue Damper Assembly
Locke Part #: E0399MFG Part #: 265-42974-00 Compare
Size: 8"
E1521.jpgAccessory Module Package
Locke Part #: E1521MFG Part #: 239-47872-00 Compare
Air Pressure Sensor.jpgAir Pressure Sensor (APS) for NPE Models
Locke Part #: E1434MFG Part #: 30010238A Compare
Air Pressure Sensor.jpgAir Pressure Sensor (APS) KDN-APS-02-D
Locke Part #: E1428MFG Part #: NASS9EX00009 Compare
224-47776-06.jpgAnode Rod with 3" x 3/4" Nipple, 39" Length
Locke Part #: E0864MFG Part #: 224-49560-08 Compare
Length: 39", Nipple Size: 3" x 3/4"
Style: WH9, Qty: 6, Application Voltage: 240/208/120 Features, :, Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed
Style: WH9, Qty: 6, Application Voltage: 240/208/120 Features, :, Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed
Style: WH10A, Qty: 6, Application Voltage: 240/208/120 Features, :, Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed
Product Image Not AvailableASME Commercial Electric Element Gasket
Locke Part #: E1128MFG Part #: 223-42016-00 Compare
233-41347-00.jpgAssembly Thermostat Board, for Use with D80, D100 Models
Locke Part #: E0402MFG Part #: 233-41347-00 Compare
Use With: D80, D100
E0044.jpgBrass Valve
Locke Part #: E0044MFG Part #: 265-42351-02 Compare
E0027.jpgCold Control
Locke Part #: E0027MFG Part #: 31513C Compare
This item will fit any, ELKAY, model water cooler stocked by Locke Supply Co.
E1518.jpgCommercial Water Heater Temp Display
Locke Part #: E1518MFG Part #: 233-46557-00 Compare
WRJ.jpgDIELECTRIC WASHER
Locke Part #: L0013MFG Part #: WRJ Compare
External pump wire.jpgExternal Pump Wire GXXX001319 for NP/NP240/NP-240E
Locke Part #: E1443MFG Part #: GXXX001319 Compare
30012226A.jpgFlame Rod NCB-180/210/240, Ø 2.3 for NCB Models
Locke Part #: E1436MFG Part #: 30012226A Compare
265-43232-00.jpgFlame Sensor with Gasket
Locke Part #: E0844MFG Part #: 265-43232-00 Compare
Flow Sensor.jpgFlow Sensor for CC, CR, NP, NR Series
Locke Part #: E1414MFG Part #: 30010537A Compare
Product Image Not AvailableFlow Sensor for NP/NP240/NP-240E
Locke Part #: E1446MFG Part #: 30011534A Compare
30008571A Sensor.jpgFlow Sensor for NPE, PPS Series
Locke Part #: E1435MFG Part #: 30008571A Compare
Gas Pressure Sensor.jpgGPS (Gas Pressure Sensor) KDN-GPS-01-A All Models
Locke Part #: E1404MFG Part #: NASS9EXGPs01 Compare
265-45543-00.jpgHot Surface Igniter with Gasket for eF Series
Locke Part #: E0845MFG Part #: 265-45543-00 Compare
Use With: eF Series
E1504.jpgIcon Commercial Gas Valve
Locke Part #: E1525MFG Part #: 239-47464-02 Compare
E1500.jpgIcon Gas Valve Control Cover Only L.P. Gas
Locke Part #: E1520MFG Part #: 239-47861-00 Compare
E1500.jpgIcon Gas Valve Control Cover Only Natural Gas
Locke Part #: E1519MFG Part #: 239-47852-00 Compare
Ignition Transformer.jpgIgnition Transformer for NPE-Series, IPG-307
Locke Part #: E1437MFG Part #: 3001045A Compare
E1524.jpgIntegrated Mixing Device
Locke Part #: E1524MFG Part #: 239-47881-00 Compare
E1309.jpgKit-Replace Cap Screen O-Ring 4 E1309
Locke Part #: E1312MFG Part #: 98169C Compare
E1500.jpgL.P. Gas Icon Valve Fits 30Gal 40Gal 50Gal L.P. Only
Locke Part #: E1502MFG Part #: 239-47465-01 LP ICON Compare
E1500.jpgL.P. Gas Icon Valve Fits 65 Gal 75 Gal L.P. Only
Locke Part #: E1503MFG Part #: 239-47465-02 LP ICON 2'' Compare
E1513.jpgL.P. Gas Pilot And Pilot Generator Only
Locke Part #: E1514MFG Part #: 233-47846-05 Compare
E1511.jpgL.P. Gas Valve Only
Locke Part #: E1512MFG Part #: 239-47859-00 Compare
E1522.jpgLeak Detection Sensor With Rubber Dam
Locke Part #: E1522MFG Part #: 239-47874-00 Compare
233-46278-03.jpgLiquid Propane FVIR Pilot Assembly
Locke Part #: E0764MFG Part #: 233-46278-03 Compare
Fuel Type: Propane
239-82034-00.jpgLower Temperature Sensor
Locke Part #: E0436MFG Part #: 239-82034-00 Compare
265-46182-03.jpgLP Gas Valve Kit, FVIR (SVC), 160°F
Locke Part #: E0543MFG Part #: 265-46182-03 Compare
Temperature: 160°F, Use With: MI75S6CX12, Fuel Type: Propane
265-45712-05.jpgLP to Natural Gas Conversion Kit for MI5036FSX
Locke Part #: E1527MFG Part #: 265-45712-05 Compare
Use With: MI5036FSX
E0268.jpgMixing Valve Kit
Locke Part #: E0268MFG Part #: 24644 Compare
E0378.jpgNAT Gas Pilot Assembly Replaces 233-46277-04
Locke Part #: E0757MFG Part #: 233-46277-05 Compare
239-45613-01.jpgNatural Gas Control Kit with Service Tool, 160°F
Locke Part #: E0990MFG Part #: 239-45613-01 Compare
Temperature: 160°F, Fuel Type: Natural Gas
239-46990-02.jpgNatural Gas Control Kit with Service Tool, 180°F
Locke Part #: E1531MFG Part #: 239-46990-02 Compare
Temperature: 180°, Fuel Type: Natural Gas
233-46277-03.jpgNatural Gas FVIR Pilot Assembly
Locke Part #: E0760MFG Part #: 233-46277-03 Compare
E1500.jpgNatural Gas Icon Valve Fits 30 Gal 40 Gal 50 Gal
Locke Part #: E1500MFG Part #: 239-47463-01 ICON VALVE Compare
E1500.jpgNatural Gas Icon Valve Fits 65 Gal 75 Gal
Locke Part #: E1501MFG Part #: 239-47463-02 VALVE Compare
E1513.jpgNatural Gas Pilot And Pilot Generator Only
Locke Part #: E1513MFG Part #: 233-47845-05 Compare
233-46988-04.jpgNatural Gas Pilot Assembly
Locke Part #: E1530MFG Part #: 233-46988-04 Compare
222-80830-02.jpgNatural Gas Valve
Locke Part #: E0386MFG Part #: 222-80830-02 Compare
265-46181-03.jpgNatural Gas Valve, 2.38" Shank, 160 Degree
Locke Part #: E0712MFG Part #: 265-46181-03 Compare
Temperature: 160°F, Shank: 2.38"
265-40251-07.jpgNatural Gas Valve, Use with MI100T6CN10 Model
Locke Part #: E0714MFG Part #: 265-40251-07 Compare
Use With: MI100T6CN10
Fuel Type: Natural Gas, Cavity (SVC): 2"
E1511.jpgNatural Gas Valve Only
Locke Part #: E1511MFG Part #: 239-47853-00 Compare
Manifold Kit.jpgNCB Series Quick Install Manifold Kit
Locke Part #: E1397MFG Part #: GFFM-MCOZUS-001 Compare
Pre-assembled complete primary heating loop, Ideal for hydronic and radiant space heating applications, Compatible with all NCB Series units on the Heating side, The SUPPLY and RETURN connections on the manifold kit fit directly onto fittings located at the bottom of the boiler unit.
E1516.jpgNew Models Low Senor
Locke Part #: E1516MFG Part #: 239-46553-02 Compare
E1516.jpgNew Models Low Senor For E0205 Heaters Only
Locke Part #: E1517MFG Part #: 239-46553-01 Compare
E0378.jpgNt. Gas Pilot Assembly Comm.
Locke Part #: E0378MFG Part #: 239-41323-01 Compare
On-Demand.jpgOn-Demand Switch for NPE-A Series
Locke Part #: E1445MFG Part #: PZZ-00046 Compare
Allows the NPE-A series pump to be activated by a remote switch, Designed to allow on demand recirculation, Requires an existing recirculation line, Title 24 recirculation compliant
243-43962-00.jpgOuter Door for FVIR Models
Locke Part #: E0798MFG Part #: 243-43962-00 Compare
Use With: FVIR Models
265-48641-00.jpgPackaged Upper & Lower Thermostat Kit
Locke Part #: E1127MFG Part #: 265-51046-00 Compare
PCB Board KDC-330.jpgPCB Board, KDC-330 for NPE-Series
Locke Part #: E1438MFG Part #: 30008300A Compare
233-46616-00.jpgPCB Dual Sensor Damper
Locke Part #: E1526MFG Part #: 233-46616-00 Compare
E1513.jpgPiezo Igniter
Locke Part #: E1515MFG Part #: 239-47954-00 Compare
243-43450-00.jpgPiezo Igniter for FVIR Models
Locke Part #: E0797MFG Part #: 243-43450-00 Compare
Use With: FVIR Models
Pipe Cover.jpgPipe Cover for NPE-210/240
Locke Part #: E1442MFG Part #: 30012634A Compare
Designed to work with all Navien tankless water heaters, To work with isolation valves use 30012581A.
Plumb Easy ValveSet.jpgPlumb Easy Valve Set, 1" Standard
Locke Part #: E1391MFG Part #: 30010950A Compare
07023.jpgPlumber’s Pack with Apcom Style Thermostats
Locke Part #: E1051MFG Part #: 07023 Compare
Contains:, (2) High Watt Density Elements #02342 4500w 240v (1) Apcom style lower thermostat w/protector #07722 (1) Apcom style upper thermostat w/protector #07862
BWB20-18.jpgPOLYMER BRD WTRHTCON3/4FIPX7/8ODCMPX18
Locke Part #: E0066MFG Part #: BWB20-18 Compare
Size: 0.57” ID X 18” connector with 3/4” M.I.P x 3/4" F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products,, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Won t work harden even with repeated bending, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, Available for PEX connections, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
233-82054-00.jpgPotentiometer
Locke Part #: E0434MFG Part #: 233-82054-00 Compare
WaterHeaterSocket.jpgProfessional Water Heater Element Socket
Locke Part #: E1043MFG Part #: 09953 Compare
Qty: 6 Features, :, For easy replacement of screw-in electric water heater elements, Chrome plated, Fits standard 1/2" socket drive
BH2505314A.jpgPump Plug Appropriate for Use with All Navien units
Locke Part #: E1407MFG Part #: BH2505314A Compare
E1309.jpgRegulator For E1309 Solenoid 4 EZS New
Locke Part #: E1310MFG Part #: 66654C Compare
Material: Brass, Valox, Rubber, Celcon, Steel, Length: 2", Connections: 1/4", Use With: EDFP214FPK
Touch activated backlight function, Easy-to-Use button type control, Built-in recirculation timer for water and energy savings, Key-pad lock button prevents inadvertent temperature changes, Advanced water heater diagnosis capability and error feedback
NR-20DU Remote.jpgRemote Controller of Water Heater for NPE Series
Locke Part #: E1441MFG Part #: 30009757A Compare
LCD Display: Indicates functions and current status., Timer button: Access the timer settings., Up button: Increase the temperature or value., Down button: Decrease the temperature or value., LED Indicator: Indicates the status of water heater., Green: Normal Mode., Red: Error occurred., Lock button: Locks the other button operations., Power button: Turns the remote controller on or off., OK button: Confirms the selection.
E0113.jpgReplacement gasket for elements
Locke Part #: E0706MFG Part #: 223-34019-00 Compare
Sand and Lime Fighter Element For Flanged Elements:
239-43676-01.jpgResettable Thermal Switch, 240°, Blue
Locke Part #: E0780MFG Part #: 239-43676-01 Compare
Color: Blue, Temperature: 240°F
239-43676-01.jpgResettable Thermal Switch, 270°, Yellow
Locke Part #: E0781MFG Part #: 239-43676-02 Compare
Color: Yellow, Temperature: 270°F
239-43676-01.jpgResettable Thermal Switch, 290°, Red
Locke Part #: E0782MFG Part #: 239-43676-03 Compare
Color: Red, Temperature: 290°F
Residential Neutralizer.jpgResidential Neutralizer Kit with Tubing
Locke Part #: E1380MFG Part #: GXXX001322 Compare
Designed to neutralize condensate for 1 unit, Refill media available.
Product Image Not AvailableResidential Warranty Upgrade Kit
Locke Part #: E0247MFG Part #: 238-44332-00 Compare
Finish: Rough brass, Material: Brass, Inlet Dimensions: 3/4", Primary Outlet Dimensions: 3/4" Electronic water leak detection and automatic water shut-off system for washing machines, Can quickly detect water leaks from a leaking washing machine or burst washing machine water supply hoses, Automatically shuts off water supply when a leak is detected, Mute button to silence audible alarm, Sounds an audible alarm when a leak has been detected to notify you of a problem, System can be easily opened , closed, tested and reset with the touch of a button, Electronic LED control panel with easy-to-read and easy-to-use function buttons, AC power with battery backup, 3/4 in FHT x 3/4 in MHT lead-free compliant, full-port motorized brass water ball valves
Finish: Rough brass, Material: Brass, Inlet Dimensions: 3/4", Primary Outlet Dimensions: 3/4" Electronic water leak detection and automatic water shut-off system for washing machines, Can quickly detect water leaks from a leaking water heater, Mute button to silence audible alarm, Automatically shuts off water supply when a leak is detected, System can be easily opened , closed, tested and reset with the touch of a button, Sounds an audible alarm when a leak has been detected to notify you of a problem, Electronic LED control panel with easy-to-read and easy-to-use function buttons, AC power with battery backup, 3/4 in MIP x 3/4 in FIP lead-free compliant, full-port motorized brass water ball valve
E0043.jpgScrew Type Element Wrench
Locke Part #: E0043MFG Part #: 265-35897-12 Compare
T0007.jpgScrew-In Element Wrench
Locke Part #: T0007MFG Part #: T7 Compare
E0008.jpgSealed-Cartridge Regulator
Locke Part #: E0008MFG Part #: 2195 Compare
This cartridge enables delivery of an almost unvarying outlet stream trajectory through upstream pressure variations in a range from 17.5 to 150 psi
TWV3SRX.jpgSERVICE VALVE KIT 3/4" IPS
Locke Part #: E1138MFG Part #: TWV30RX Compare
Size: 3/4” IPS x 3/4” IPS Hot/Cold Service Valve Kit w/ 200K Pressure Relief Valve, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Compact design ideal for recessed and cover box installations, Captive coupling nut & washer reduces opportunity for component loss making installation easier, Captive washer won t kink or tear during installation, Forged, one-piece construction reduces the potential for pinhole leaks, 100% Compliant, Integrated drain valve with independent, turn operation allows quick system diagnostic testing and maintenance, Built-in side port for the pressure relief valve reduces the number of connections & simplifies the installation, Right-sized handles, color-coded for immediate system identification. Perfect for tight installations, For use in potable water distribution systems for water flow control. Valves connect directly to cold water inlet and hot water outlet of the tankless water heater. Use for appliance maintenance and emergency shut-off.
Product Image Not AvailableSERVICE VALVE KIT 3/4" SWT INL
Locke Part #: E1139MFG Part #: TWV3SRX Compare
Size: 3/4” Sweat x 3/4” IPS Hot/Cold Service Valve Kit w/ 200K Pressure Relief Valve, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Compact design ideal for recessed and cover box installations, Captive coupling nut & washer reduces opportunity for component loss making installation easier, Captive washer won t kink or tear during installation, Forged, one-piece construction reduces the potential for pinhole leaks, 100% Compliant, Integrated drain valve with independent, turn operation allows quick system diagnostic testing and maintenance, Built-in side port for the pressure relief valve reduces the number of connections & simplifies the installation, Right-sized handles, color-coded for immediate system identification. Perfect for tight installations, For use in potable water distribution systems for water flow control. Valves connect directly to cold water inlet and hot water outlet of the tankless water heater. Use for appliance maintenance and emergency shut-off.
E0052.jpgSolenoid Valve for New E0053 & E0054
Locke Part #: E0052MFG Part #: 35981C Compare
E0009.jpgSteady-Stream Bubbler
Locke Part #: E0009MFG Part #: 2194 Compare
Unique construction incorporates projector, flow control and on/off push button valve in one unit.
E0030.jpgSupply Strainer, 3/8" O.D. Tube Connect
Locke Part #: E0030MFG Part #: 55996C Compare
Used when the wire between the upper and lower thermostats is too short., Includes one upper and lower thermostat (Therm-O-Disc style 59T/66T)., Includes one 6" long 10 gauge jumper wire and one push wire connector., Includes 2 thermostat protectors., Most often used with Bradford White water heaters.
265-42034-00.jpgThermostat, 140 Degree
Locke Part #: E0433MFG Part #: 265-42034-00 Compare
Temperature: 140°F
E0121.jpgThermostat (Single Element Heater)
Locke Part #: E0121MFG Part #: 265-50691-00 Compare
239-82033-00.jpgUpper Thermostat Sensor, 2 Wires
Locke Part #: E0392MFG Part #: 239-82033-00 Compare
Vent Cap.jpgVent Door Cap for NPE-210/240
Locke Part #: E1433MFG Part #: 30010604A Compare
Feature:, Allows for outdoor installation of NPE-A and NPE-S models.
Voltage: 120VAC, Shipping Weight: 5, Connection Size: 3/4", Connection Type: NPT, Pipe Size: 3/4", Leadtime: 1 week, Units: 1, Shipping Length: 14, Shipping Width: 8, Shipping Height: 8, Psi: 80, Number of Sensors: 1, Power Cod Length: 12’, Sensor Cord Length: 8’, Temperature Range: Up to 140 Degrees F Automatic Water Shut-Off, Optional Signal Wire, 8 Sensor Range, Transformer is CUL listed; actuator is CE listed, Brass Globe Valve with Stainless Steel Braided Hose Construction, Audible Alarm, Reset Button, For Residential & Commercial Washing Machines, Includes:, Sensor, Receiver w/Audible Alarm &, SPDT Relay Output, Valve
E1137.jpgWater Heater Drain Valve
Locke Part #: E1137MFG Part #: 11711-T Compare
Hot water heater drain valves are designed for use in residential and commercial hydronic heating systems. They feature brass body construction with a 3/4" hose connection on the outlet side.
Voltage: 120VAC, Shipping Weight: 8, Connection Size: 1", Connection Type: NPT, Pipe Size: 1", Leadtime: 1 week, Units: 1, Shipping Length: 13, Shipping Width: 9, Shipping Height: 6, Psi: 80, Number of Sensors: 1, Power Cod Length: 12’, Sensor Cord Length: 100’ Wirelss Range, Temperature Range: Up to 140 Degrees F, Alarm Control L x W x H: 4" x 1.5" x 5.25", Sensor L x H: 3" x 1", Wall Plug L x W x H: 2.25" x 2" x 3" Blow out proof stem, chrome plated brass ball, Leak detection on multiple floors and living levels, Audible alarm and alarm silence button; easy reset button, Rigid and reliable automatic valves, Valves meet ANSI 61 / Annex G potable water standard, 100% electronically tested in the open and closed position at 80 psi, P.T.F.E. seats with O-RING backing for low operating torque, P.T.F.E. seats and double O-RING stem packing, Full Port NPT Lead Free Brass Ball Valve Construction, For Residential, Commercial and Industrial Water Mains Applications, Includes:, (2) Wireless Sensors, Full Port Lead Free Valve, Receiver w/Audible Alarm & SPDT Relay Output, Sensor Low Battery Indication
Voltage: 120VAC, Shipping Weight: 7, Connection Size: 3/4", Connection Type: NPT, Pipe Size: 3/4", Leadtime: 1 week, Units: 1, Shipping Length: 13, Shipping Width: 9, Shipping Height: 6, Psi: 80, Number of Sensors: 1, Power Cod Length: 12’, Sensor Cord Length: 100’ Wirelss Range, Temperature Range: Up to 140 Degrees F, Alarm Control L x W x H: 4" x 1.5" x 5.25", Sensor L x H: 3" x 1", Wall Plug L x W x H: 2.25" x 2" x 3" Blow out proof stem, chrome plated brass ball, Leak detection on multiple floors and living levels, Audible alarm and alarm silence button; easy reset button, Rigid and reliable automatic valves, Valves meet ANSI 61 / Annex G potable water standard, 100% electronically tested in the open and closed position at 80 psi, P.T.F.E. seats with O-RING backing for low operating torque, P.T.F.E. seats and double O-RING stem packing, Full Port NPT Lead Free Brass Ball Valve Construction, For Residential, Commercial and Industrial Water Mains Applications, Includes:, (2) Wireless Sensors, Full Port Lead Free Valve, Receiver w/Audible Alarm & SPDT Relay Output, Sensor Low Battery Indication