Loading ...

Search in: Well Pumps Category

S140.jpg1/2 HP SUB PUMP 115V 3WIRE PLA
Locke Part #: S0143MFG Part #: 22050K3A
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
S140.jpg1/2 HP SUB PUMP THERMOPLASTIC
Locke Part #: S0140MFG Part #: 22050K3
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available1/2 HP SUB PUMP W/CONTROL BX
Locke Part #: S0175MFG Part #: 21050K3
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available1/2 HP SUBMERSIBLE PUMP 2 WIRE
Locke Part #: S0159MFG Part #: 21050K2
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
S140.jpg1 HP SUB PUMP THERMOPLASTIC
Locke Part #: S0142MFG Part #: 22100K3
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available1 HP SUB PUMP W/CONTROL BX
Locke Part #: S0184MFG Part #: 21100K3
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available1 HP SUBMERSIBLE PUMP 2 WIRE
Locke Part #: S0161MFG Part #: 21100K2
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available21050V3 1/2 HP 230V 3 WIRE 7 GPM SUB PUMP
Locke Part #: S0200MFG Part #: 21050V3
230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy MCDONALD, A.Y.
Product Image Not Available21100V3 1 HP 230V 3 WIRE 7 GPM SUB PUMP
Locke Part #: S0201MFG Part #: 21100V3
230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy MCDONALD, A.Y.
Product Image Not Available21150M3 1 1/2 HP 230V SUB PUMP
Locke Part #: S0185MFG Part #: 21150M3
1-1/2 HP 230V 3 WIRE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1-1/2 HP, PSI, 50, 100, 150, 200, 250, 300, 400, 500, 550, 600, 650, 700, 750, 800, 850., 900, 37.2, 32.7, 27.8, 20.6, 10.8, 30, 30.8, 25.1, 16.9, 50, 25.6, 17.7, 7.0 MCDONALD, A.Y.
Product Image Not Available21150V3 1 1/2 HP 230V 3 WIRE 7GPM SUB PUMP
Locke Part #: S0202MFG Part #: 21150V3
230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy MCDONALD, A.Y.
S140.jpg3/4 HP SUB PUMP THERMOPLASTIC
Locke Part #: S0141MFG Part #: 22075K3
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available3/4 HP SUB PUMP W/CONTROL BX
Locke Part #: S0176MFG Part #: 21075K3
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available3/4 HP SUBMERSIBLE PUMP 2 WIRE
Locke Part #: S0160MFG Part #: 21075K2
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.