|
|
|
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy |
MCDONALD, A.Y. |
|
|
|
|
230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy |
MCDONALD, A.Y. |
|
|
|
|
1-1/2 HP 230V 3 WIRE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1-1/2 HP, PSI, 50, 100, 150, 200, 250, 300, 400, 500, 550, 600, 650, 700, 750, 800, 850., 900, 37.2, 32.7, 27.8, 20.6, 10.8, 30, 30.8, 25.1, 16.9, 50, 25.6, 17.7, 7.0 |
MCDONALD, A.Y. |
|
|
|
|
230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy |
MCDONALD, A.Y. |
|
|
|
|
A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
|
|
|
A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 |
MCDONALD, A.Y. |
|
Plumbing, Electrical & HVAC Distributor
