Loading ...

Loading ...

Search in: Sheet Metal Tools Category

3087935PD.jpg1/4" Split Point Stubby Pilot Bit
Locke Part #: T2238MFG Part #: 3087935PD Compare
2009314CHC.jpg1-1/8" Carbide Hole Cutter
Locke Part #: T2236MFG Part #: 2009618CHC Compare
Diameter: 1-1/8", Conduit Size: 3/4", Use Arbor (Snap Back): 5L, Use Arbor (Standard): 5L Accurate, Burr-Free Holes, Precision ground carbide teeth for fast cutting of clean, round holes, Will Not Damage Work, Over-drill stopper prevents the tool from penetrating beyond the hole, Starts On Contact, Split point pilot bit for faster penetration and less walking
2009314CHC.jpg1-3/8" Carbide Hole Cutter
Locke Part #: T2237MFG Part #: 2010022CHC Compare
Diameter: 1-3/8", Use Arbor (Standard): 3L, 6L Accurate, Burr-Free Holes, Precision ground carbide teeth for fast cutting of clean, round holes, Will Not Damage Work, Over-drill stopper prevents the tool from penetrating beyond the hole, Starts On Contact, Split point pilot bit for faster penetration and less walking
T0072_P6716A.jpg11-1/2" Long Cut AV Snips
Locke Part #: T0072MFG Part #: MWT-6716A Compare
Ideal for cutting 20 ga. sheet metal.
Accurate, Burr-Free Holes, :, Precision ground carbide teeth for fast cutting of clean, round holes, Will Not Damage Work, :, Over-drill stopper prevents the tool from penetrating beyond the hole, Starts On Contact, :, Split point pilot bit for faster penetration and less walking, 12 Piece Hole Saw Kit, :, 7/8", 1-1/8", 1-3/8", Included:, Standard 3L (3/8" Shank), Standard 5L (3/8" Shank), 1/4" split point pilot bit, Plug Ejection springs, 1/8" hex wrench
T93.jpg3" Hand Seamer
Locke Part #: T0093MFG Part #: MWT-S2 Compare
Jaws are hot drop-forged of carbon steel. Bends and flattens soft sheet metal up to 22 gauge. Straight handle model and higher leverage offset handle model. Heavy duty plastic grips for user comfort.
T97.jpg3" Hand Seamer
Locke Part #: T0097MFG Part #: MWT-S1 Compare
3" Straight Handle Seamer. Jaws are hot drop-forged of carbon steel. Bends and flattens soft sheet metal up to 22 gauge. Straight handle model and higher leverage offset handle model. Heavy duty plastic grips for user comfort.
2009314CHC.jpg7/8" Carbide Hole Cutter
Locke Part #: T2235MFG Part #: 2009314CHC Compare
Diameter: 7/8", Conduit Size: 1/2", Use Arbor (Snap Back): 5L, Use Arbor (Standard): 5L Accurate, Burr-Free Holes, Precision ground carbide teeth for fast cutting of clean, round holes, Will Not Damage Work, Over-drill stopper prevents the tool from penetrating beyond the hole, Starts On Contact, Split point pilot bit for faster penetration and less walking
Weight: 14.4 oz (408.23 g), Overall Length: 9-7/8’’ (251 mm), Handle Color: Red/Black, Cutting Length: 1-3/8’’ (35 mm), Cutting Pattern: Left/Straight, Snip Type: Aviation, Cutting Capacity Cold Rolled / Stainless Steel: 18 Gauge/22 Gauge Forged steel cutting blades for superior strength and durability. Replacement spring (Cat. No. P406) available., Replacement spring (Cat. No. P406) available., Soft touch grips for maximum control and comfort., J1100L, J1101R, J1102S Journeyman snips cut 18 gauge cold rolled steel and 22 gauge stainless steel.
Weight: 14.7 oz (416.74 g), Overall Length: 9-7/8’’ (251 mm), Handle Color: Green/Black, Cutting Length: 1-3/8’’ (35 mm), Cutting Pattern: Right/Straight, Snip Type: Aviation, Cutting Capacity Cold Rolled / Stainless Steel: 18 Gauge/22 Gauge Forged steel cutting blades for superior strength and durability. Replacement spring (Cat. No. P407) available., Replacement spring (Cat. No. P407) available., Soft touch grips for maximum control and comfort., J1100L, J1101R, J1102S Journeyman snips cut 18 gauge cold rolled steel and 22 gauge stainless steel.
Product Image Not AvailableAdjustment Sleeve with Screw
Locke Part #: T0296MFG Part #: 50408 HC1E Compare
Item: T0296
Product Image Not AvailableALUMINUM SNIP, STRAIGHT, 12"
Locke Part #: T0101MFG Part #: 52988 M12A Compare
Warranty: Limited Lifetime, Item: T0101, Length of Cut in (mm): 3 (76.2), Length in (cm): 12 (31), Net Weight oz (g): 17 (482) Larger Handle Loops, Sleek Head Design Improves Maneuverability, Full 3" (76.2 mm) Cutting Length - 12", Pressure-fit Inset Blades (M12N, M12NG, MC12N, MC12NG), Optional Snip Holster
Product Image Not AvailableALUMINUM SNIP, STRAIGHT, 14"
Locke Part #: T0064MFG Part #: 53041 M14A Compare
Warranty: Limited Lifetime, Item: T0064, Length of Cut in (mm): 3-1/4 (82.6), Length in (cm): 14 (36), Net Weight oz (g): 22 (624), Repl Blade: M14ARB Larger Handle Loops, Optional Snip Holster, Sleek Head Design Improves Maneuverability, Full 3-1/4" (82.6 mm) Cutting Length - 14", Pressure-fit Inset Blades (M14N, MC14N), Capacities:, Vinyl: 0.055 inches, Aluminum: 0.035 inches, Copper: 0.023 inches, Stainless Steel 26 Gauge: 0.018 inches, Galvanized Steel 24 Gauge: 0.028 inches, Mild Steel 22 Gauge: 0.030 inches
Product Image Not AvailableBottom Bearing For HC1 and HC2 Hole Cutters
Locke Part #: T1201MFG Part #: HC1K Compare
Item: T1201
Product Image Not AvailableBottom Bearing For T100
Locke Part #: T0297MFG Part #: HC1F Compare
Item: T0297
T71.jpgBulldog AV Snips
Locke Part #: T0071MFG Part #: MWT-6716B Compare
c5r_catalog.jpgCRIMPER, PIPE, 5-BLADE
Locke Part #: T0211MFG Part #: 53439 C5R Compare
Warranty: Limited Lifetime, Item: T0211, Net Weight oz (g): 17 (482), Length in (mm): 9-5/8 (244), Jaws: Carbon Steel, Throat Depth in (mm): 1-5/8 (41.3) Uniqure One-Hand Operation Latch, Soft-Touch, Non-Slip Handle Insert, Ergonomically Contoured Handles, Opening Maximizes Handle Leverage
T2001.jpgCuts left & Straight
Locke Part #: T2001MFG Part #: 22101 Compare
T2001.jpgCuts Right & Straight
Locke Part #: T2002MFG Part #: 22102 Compare
Product Image Not AvailableCUTTER BIT FOR HC1 OR HC2
Locke Part #: T0109MFG Part #: 50072 CB Compare
Warranty: Limited Lifetime, Item: T0109
dividers-18.jpgDIVIDER, 18" RADIUS
Locke Part #: T0068MFG Part #: 50845 18 Compare
Warranty: Limited Lifetime, Item: T0068, Length in (cm): 11 (28), Net Weight oz (g): 7 (199) Accurate and fast adjusting., Two sizes for circles up to 32 (81 cm) and 42 (107 cm)., Points are easily resharpened or replaced., Nickel plated steel body
1660.jpgDIVIDER, 24" RADIUS
Locke Part #: T0069MFG Part #: 50916 24 Compare
Warranty: Limited Lifetime, Item: T0069, Length in (cm): 13-1/2 (34), Net Weight oz (g): 9 (255) Accurate and fast adjusting., Two sizes for circles up to 32 (81 cm) and 42 (107 cm)., Points are easily resharpened or replaced., Nickel plated steel body
Product Image Not AvailableDUCT STRETCHER
Locke Part #: T1202MFG Part #: 50122 DS1 Compare
Warranty: Limited Lifetime, Item: T1202, Net Weight oz (g): 12 (340), Length in (mm): 16 (406) Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand., Low profile, straight body is designed to go anywhere, even in the tightest quarters. Additional spacing holes allow wheels to be adjusted to span greater distances., Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole.
Product Image Not AvailableDUCT STRETCHER, OFFSET
Locke Part #: T1203MFG Part #: 50124 DS2 Compare
Warranty: Limited Lifetime, Item: T1203, Net Weight oz (g): 12 (340), Length in (mm): 16 (406) Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand., Low profile, straight body is designed to go anywhere, even in the tightest quarters. Additional spacing holes allow wheels to be adjusted to span greater distances., Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole., Offset handle to eliminate knuckle contact.
Product Image Not AvailableFOLDING TOOL, 12" (3/8", 1")
Locke Part #: T1233MFG Part #: 52246 12F Compare
Warranty: Limited Lifetime, Item: T1233, Net Weight oz (g): 20 (425), Folding Depths in (mm): 3/8 (9.5), 1(25.4), Width in (cm): 12 (31) Folding seams are formed from two steel halves, permanently joined together, Handy sight holes assure proper depth alignment, Longer folding tool assures a more uniform fold., Extra long folding tool may also be used as a mini-brake by roofing and siding applications
18-000.jpgFOLDING TOOL, 18" (3/8", 1")
Locke Part #: T1234MFG Part #: 52247 18F Compare
Warranty: Limited Lifetime, Item: T1234, Net Weight oz (g): 31 (879), Folding Depths in (mm): 3/8 (9.5), 1 (25.4), Width in (cm): 18 (46) Folding seams are formed from two steel halves, permanently joined together, Handy sight holes assure proper depth alignment, Longer folding tool assures a more uniform fold., Extra long folding tool may also be used as a mini-brake by roofing and siding applications
24f.jpgFOLDING TOOL, 24" (3/8", 1")
Locke Part #: T1231MFG Part #: 52615 24F Compare
Warranty: Limited Lifetime, Item: T1231, Net Weight oz (g): 42 (1191), Folding Depths in (mm): 3/8 (9.5), 1 (25.4), Width in (cm): 24 (61) Folding seams are formed from two steel halves, permanently joined together, Handy sight holes assure proper depth alignment, Longer folding tool assures a more uniform fold., Extra long folding tool may also be used as a mini-brake by roofing and siding applications
sh3v.jpgHAMMER, SETTING, 18 OZ
Locke Part #: T0065MFG Part #: 50628 SH3 Compare
Warranty: Limited Lifetime, Item: T0065, Overall Length in (cm): 12-3/4 (298), Net Weight oz (g): 18 (510), Head Length in (mm): 5-3/4 (140), Face Size in (mm): 1 (22.2) One-piece forged, I-beam construction, Full-polished heads with beveled face and pein are corrosion resistant, Hammer sections are individually hardened and tempered for strength and resiliency
T99.jpgHand Notcher
Locke Part #: T0099MFG Part #: MWT-N1 Compare
Blade is hot drop-forged of carbon steel. Cuts 31 "V" notch. Cuts clean without slippage. Compound leverage action. Heavy duty plastic grips for user comfort.
Product Image Not AvailableHOLE CUTTER, METAL
Locke Part #: T0100MFG Part #: 50406 HC1 Compare
Warranty: Limited Lifetime, Capacity: 20 ga., Item: T0100, Net Weight oz (g): 16 ( 454 ), Hole Diameter in (mm): 2-12 (51-305) Versatile for a variety of metal work., Longest lasting cutter bit., Precision-fit sealed bearings., Easy-adjusting pivot pin.
hc2.jpgHOLE CUTTER, METAL, LARGE
Locke Part #: T0103MFG Part #: 52477 HC2 Compare
Warranty: Limited Lifetime, Capacity: 20 ga., Item: T0103, Net Weight oz (g): 22 (624), Hole Diameter in (mm): 2-20 (51-508 Versatile for a variety of metal work., Longest lasting cutter bit., Precision-fit sealed bearings., Easy-adjusting pivot pin.
T0073_P-6716L.jpgLeft Cut AV Snips
Locke Part #: T0073MFG Part #: MWT-6716L Compare
Ideal for cutting 18 gauge or lighter cold rolled sheet steel.
T0221_P6900Lap3.jpgLeft Cut Upright Snips
Locke Part #: T0221MFG Part #: MWT-6900L Compare
Right angle blades make cutting easier in tight spaces and overhead. Capacity to cut 24 ga. cold-rolled sheet metal and 28 ga. stainless steel sheet metal.
T0095_P-6510R.jpgLeft Offset Cutting Tool
Locke Part #: T0096MFG Part #: MWT-6510L Compare
1 lever snip takes the place of 3 old fashioned snips. Compounded action increases cutting power at blade tips.
Item: T1207
Item: T1205
n1r_catalog.jpgNOTCHER, HAND, 13/16"
Locke Part #: T1214MFG Part #: 53449 N1R Compare
Warranty: Limited Lifetime, Item: T1214, Throat Depth in (mm): 13/16 (20.6) Unique One-Hand Operation Latch, Soft-Touch, Non-Slip Handle Insert, Ergonomically Contoured Handles, Opening Maximizes Handle Leverage, Alloy steel forging with carbon steel shell, Notcher makes a clean 30 " V" shaped cut in sheet metal 13/16" maximum throat depth, Fast and easy cutting, Rust resistant nickel plate and black oxide finishes
T2001.jpgNotching & Trimming Bulldog Aviation Red Snips
Locke Part #: T2004MFG Part #: 22105 Compare
T2006.jpgOffset Aviation Snips: Cuts left and straight
Locke Part #: T2006MFG Part #: 22206 Compare
T2210_M2210.jpgOffset Tinner Snips R
Locke Part #: T2210MFG Part #: MT-2210 Compare
Easy to use, versatile, and designed for cutting aluminum, under-siding, roofing materials, metal flashing, linoleum, vinyl, cardboard, screen., Weighing only 14.4 oz. makes them easier to use, more conventional than traditional forged blade tinners.
T214.jpgPipe Crimper
Locke Part #: T0214MFG Part #: MWT-C5 Compare
Blades are 13 gauge cold-rolled steel heat treated to a hardness of 45-50Rc. Crimps round and square duct, down spouts, etc. Compound leverage action. Heavy duty plastic grips for user comfort.
HC1B.jpgPivot Pin Set For HC1 and HC2 Hole Cutters
Locke Part #: T0104MFG Part #: 50407 HC1B Compare
Item: T0104
308803CHCAS.jpgPlug Ejection Springs
Locke Part #: T2233MFG Part #: 308803CHCAS Compare
ts1-000.jpgREPLACEMENT BLADES, TS1
Locke Part #: T2503MFG Part #: 53034 TS1RB Compare
Warranty: Limited Lifetime, Item: T2503
tshd1a-000.jpgREPLACEMENT BLADES, TSHD
Locke Part #: T2508MFG Part #: 53061 TSHDRB Compare
Warranty: Limited Lifetime, Item: T2508
18-000.jpgREPLACEMENT DIVIDER POINTS
Locke Part #: T2009MFG Part #: 50589 RP 2 Compare
Warranty: Limited Lifetime, Item: T2009
T0073_P-6716L.jpgRight Cut AV Snips
Locke Part #: T0074MFG Part #: MWT-6716R Compare
Ideal for cutting 18 gauge or lighter cold rolled sheet steel.
T0221_P6900Lap3.jpgRight Cut Upright Snips
Locke Part #: T0222MFG Part #: MWT-6900R Compare
Right angle blades make cutting easier in tight spaces and overhead. Capacity to cut 24 ga. cold-rolled sheet metal and 28 ga. stainless steel sheet metal.
T0095_P-6510R.jpgRight Offset Cutting Tool
Locke Part #: T0095MFG Part #: MWT-6510R Compare
1 lever snip takes the place of 3 old fashioned snips. Compounded action increases cutting power at blade tips.
a60-000.jpgSCRIBER, SHEET METAL
Locke Part #: T1281MFG Part #: 50009 A60 Compare
Warranty: Limited Lifetime, Item: T1281, Net Weight oz (g): 10 (284), Minimum & Maximum Adjustments in (mm): 1/4” to 12-1/2” (6.4 to 318) Compact design, Infinite depth to 12-1/2" (318 mm), Use replaceable common fastener, Durable construction, The stop at the end of the scriber sleeve glides along edge of work as a 6 x 3/8" sheet metal screw point scribes a clean, hard line., Adjustable from 1/4" to 12-1/2" (6.4 to 318mm) depths in 1/8" (3.2mm) graduations, Rotate the scriber extension and knob end to end for depths larger than 6-1/2" (165mm), The use of a Zip-In sheet metal screw makes point replacement practical and economical, Screw point is protected when tool is closed, Pocket size tool is constructed of rust resistant nickel plated steel, Knob assembly with hardened steel bolt insert will not strip out
a40-000.jpgSCRIBER, SHEET METAL
Locke Part #: T1282MFG Part #: 52608 A40 Compare
Warranty: Limited Lifetime, Item: T1282, Scribing Depths (in): 1/8”, 3/16”, 1/4”, 5/16”, 3/8”,1/2, 5/8”, 3/4”, 7/8”, 1” Scribe trim lines on galvanized sheet metal quickly and accurately, Ten preset scribing depths from 1/8" to 1", Each scribing depth size features a dual edged point to create clean, readable and accurate score lines parallel to the edge of the metal sheet., Corrosion resistant finish and etched-in dimensions are readable for life of tool, Packaged in a clear vinyl, reusable pouch for storage in pocket, pouch or tool box, Five teeth product 10 scribing depths, Compact scribe stores in pocket, pouch or tool box, Hang Hole
s2r_catalog.jpgSEAMER, HAND, 3"
Locke Part #: T1298MFG Part #: 53442 S2R Compare
Warranty: Limited Lifetime, Item: T1298, Net Weight oz (g): 24 (680), Length in (mm): 8 (203), Jaw Depth in (mm): 1-1/4 (31.8), Jaw Width in (mm): 3-1/4 (83), Variable Leverage Ratio (High / Low) throughout stroke: 4.7 to 1.0 - 7.1 to 1.0, Jaws: High Carbon Steel Forgings Jaws are drop forged, high impact steel. Hardened steel handles resist abuse, Precise vee-notched depth graduations on jaws are in 1/4" (6.4 mm) increment
s3r_catalog.jpgSEAMER, HAND, 3", OFFSET
Locke Part #: T2008MFG Part #: 53443 S3R Compare
Warranty: Limited Lifetime, Item: T2008, Net Weight oz (g): 24 (680), Length in (mm): 8 (203), Jaw Depth in (mm): 1-1/4 (31.8), Jaw Width in (mm): 3-1/4 (83), Variable Leverage Ratio (High / Low) throughout stroke: 4.7 to 1.0 - 7.1 to 1.0, Jaws: High Carbon Steel Forgings Offer the powerful leverage of head to handle linkage, providing a more usable operation range for handNon-slip vinyl grips with hand stops provide added comfort and control., Jaws are drop forged, high impact steel Tool also features rust resistant nickel plating, Hardened steel handles resist abuse, Powerful compound leverage design, Non-slip vinyl grips with hand stops provide added comfort and control, Precise vee-notched depth graduations on jaws are in 1/4" (6.4 mm) increments, Offset design helps to work on hard to reach angles
s6r_catalog.jpgSEAMER, HAND, 6"
Locke Part #: T0094MFG Part #: 53445 S6R Compare
Warranty: Limited Lifetime, Item: T0094, Net Weight oz (g): 30 (851), Length in (mm): 8 (203), Jaw Depth in (mm): 1-1/4 (31.8), Jaw Width in (mm): 6 (152), Variable Leverage Ratio (High / Low) throughout stroke: 4.7 to 1.0 - 7.1 to 1.0, Jaws: High Carbon Steel Forgings Offer the powerful leverage of head to handle linkage, providing a more usable operation range for handNon-slip vinyl grips with hand stops provide added comfort and control, Powerful compound leverage design, Tool also features rust resistant nickel plating, Jaws are drop forged, high impact steel. Hardened steel handles resist abuse, Precise vee-notched depth graduations on jaws are in 1/4" (6.4 mm) increment
SC1.jpgSingle Pipe Crimper
Locke Part #: T0213MFG Part #: 50620 SC1 Compare
Item: T0213, Net Weight oz (g): 8 (227), Length in (mm): 8 (203), Jaws: Carbon Steel, Throat Depth in (mm): 1-1/4 (31.8) Carbon Steel Blades, Superior compound leverage mechanism, Comfortable opening, spring-actuated handles, and vinyl cushioned grips, Nickel plating resists elements
sl1r_catalog.jpgSNAP LOCK PUNCH, METAL
Locke Part #: T1297MFG Part #: 53451 SL 1 R Compare
Warranty: Limited Lifetime, Item: T1297, Length in (cm): 8", Throat Depth in (mm): 3/8 (9.5) Unique One-Hand Operation Latch, Soft-Touch, Non-Slip Handle Insert, Ergonomically Contoured Handles, Opening Maximizes Handle Leverage
T0073_P-6716L.jpgStraight Cut AV Snips
Locke Part #: T0075MFG Part #: MWT-6716S Compare
Ideal for cutting 18 gauge or lighter cold rolled sheet steel.
13903.2.jpgSwivel Head Shear & Case
Locke Part #: T2500MFG Part #: 13903 Compare
Warranty: 1 year warranty from the date of purchase. Authorized returns due to defective workmanship or materials will be repaired, replaced, or credit issued as determined by Shook., Type: Steel, Capacity: 14 Gauge Sheet Metal, 16 Gauge Stainless Steel, Power Rating: 120V, 4 A All aluminum cutting head swivels 360 , Cuts 14 gauge sheet metal & 16 gauge stainless steel, 0-2500 RPM; 8' cord, 2 year warranty, High speed steel cutting blades, 120V, 4.0 Amp double insulated power with a variable speed switch
All aluminum cutting head swivels 360 , 0-2500 RPM; 8' Cord, 1 Year Limited warranty, High Speed steel cutting blades, Cuts 16 gauge sheet metal & 18 gauge stainless at 150" per min, 20V 4.0 Amp double insulated power with a variable speed switch
ts1_catalog-000.jpgTURBO SHEAR, METAL
Locke Part #: T2502MFG Part #: 53020 TS1 Compare
Warranty: Limited Lifetime, Item: T2502, Net Weight oz (g): 26 (737) Inserts into chuck of A/C or cordless drill, Offset design saves hands, Navigates tight patterns and square cuts, Cuts a variety of building materials, 20 gauge capacity in galvanized steel, Cut-away view, TSDC Drill Clamp (optional)
turboshear-hd-tshd.jpgTURBOSHEAR, HEAVY DUTY
Locke Part #: T2507MFG Part #: 53056 TSHD Compare
Warranty: Limited Lifetime, Item: T2507, Net Weight lbs (kg): 2.61 (1.18) Heavy-duty TurboShear HD cuts 18-gauge galvanized, building and roofing panels, stone coated metal shingles, layered metal seams including spiral duct metal seams down to 20-gauge and most other common metal building materials., Drill clamping devise is standard., Fits most 14.4-volt or larger A/C or cordless drills., Cuts straight and to left., Navigates tight curved patterns and square cuts., Blind cuts require a 1-inch starting hole
Product Image Not AvailableWHEEL SET, DS1/DS2/DS3
Locke Part #: T1204MFG Part #: 50123 DS1C Compare
Warranty: Limited Lifetime, Item: T1204