Loading ...

Search in: Hole Saws Category

1-1/2" Carbide Grit Hole Saw
Locke Part #: T1139 MFG Part #: 625.2416
MAG-BIT
1-1/2" Carbide Tipped Hole Cutter
Locke Part #: T1127 MFG Part #: 626.2416
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1-1/2" Hole Saw
Locke Part #: T0989 MFG Part #: 24L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
1-1/4" Carbide Tipped Hole Cutter
Locke Part #: T1125 MFG Part #: 626.2016
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1-1/8" Carbide Grit Hole Saws 1-3/8" Depth
Locke Part #: T1137 MFG Part #: 625-1816
Diameters 3/4" through 4-1/8", Works in rotary and SDS Hammer mode, Works forward and reverse, Use standard or SDS shank arbors, Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster., Concrete pavers., Drill a hole through cement takes less than 7 seconds. MAG-BIT
1-1/8" Carbide Tipped Hole Cutter
Locke Part #: T1124 MFG Part #: 626-1816
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1-1/8" Hole Saw
Locke Part #: T0982 MFG Part #: 18L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
1-3/16" - 6-3/8" Hole Saw
Locke Part #: T3113 MFG Part #: EL5000
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
1-3/4" Carbide Grit Hole Saw
Locke Part #: T1140 MFG Part #: 625.2816
MAG-BIT
1-3/4" Carbide Tipped Hole Cutter
Locke Part #: T1128 MFG Part #: 626.2816
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1-3/4" Hole Saw
Locke Part #: T0987 MFG Part #: 28L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
1-3/8" Carbide Grit Hole Saw
Locke Part #: T1138 MFG Part #: 625.2216
MAG-BIT
1-3/8" Carbide Tipped Hole Cutter
Locke Part #: T1126 MFG Part #: 626-2216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1-3/8" Hole Saw
Locke Part #: T0984 MFG Part #: 22L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
1/2" Arbor for 20L-96L
Locke Part #: T0972 MFG Part #: 1779802
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
1/2" Arbor for 9L-19L
Locke Part #: T0971 MFG Part #: 1779774
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
1/4" Carbide Tipped Pilot Bit
Locke Part #: T0929 MFG Part #: 626.9015B
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
2" - 8-1/4" Hole Saw
Locke Part #: T3115 MFG Part #: EL6000
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
2" Carbide Grit Hole Saw
Locke Part #: T1141 MFG Part #: 625.3216
MAG-BIT
2" Carbide Tipped Hole Cutter
Locke Part #: T1129 MFG Part #: 626.3216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
2" Hole Saw
Locke Part #: T0988 MFG Part #: 32L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
2-1/2" Carbide Grit Hole Saw
Locke Part #: T1143 MFG Part #: 625.4016
MAG-BIT
2-1/2" Carbide Tipped Hole Cutter
Locke Part #: T1131 MFG Part #: 626.4016
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
2-1/2" Hole Saw
Locke Part #: T0991 MFG Part #: 40L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
2-1/4" Carbide Grit Hole Saws 1-3/8" Depth
Locke Part #: T1142 MFG Part #: 625.3616
Diameters 3/4" through 4-1/8", Works in rotary and SDS Hammer mode, Works forward and reverse, Use standard or SDS shank arbors, Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster., Concrete pavers., Drill a hole through cement takes less than 7 seconds. MAG-BIT
2-1/4",1-1/2" Pipe & Co.
Locke Part #: T0916 MFG Part #: 25436-36HC
3 times faster than hole saws, Safer and less torque than self-feed bits, easy plug ejection, cuts more than 300 holes before resharpening. LENOX
2-3/4",2" Pipe & Coup.
Locke Part #: T0917 MFG Part #: 25444-44HC
3 times faster than hole saws, Safer and less torque than self-feed bits, easy plug ejection, cuts more than 300 holes before resharpening. LENOX
2-5/8" Carbide Tipped Hole Cutter
Locke Part #: T1132 MFG Part #: 626.4216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
Quick Change, :, Faster and easier to engage / disengage hole saw, Prevents Threads From Stripping, :, Drives off pins, not threads, No Tools Needed, :, Prevents hole saw from locking on arbor, No Adaptor Required, :, Arbor threads directly into all hole saws, Easier Plug Removal LENOX
3" Carbide Grit Hole Saw
Locke Part #: T1144 MFG Part #: 625.4816
MAG-BIT
3" Carbide Tipped Hole Cutter
Locke Part #: T1133 MFG Part #: 626.4816
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
3" Hole Saw
Locke Part #: T0992 MFG Part #: 48L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
3-5/8" Carbide Grit Hole Saw
Locke Part #: T1145 MFG Part #: 625.5816
MAG-BIT
3-5/8" Hole Saw
Locke Part #: T0993 MFG Part #: 58L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
Long Lasting: High speed steel tooth provides long tool life, Cuts Fast / Low Torque: Designed to run at high speeds with very little torque, Durable Wood Cutting Tool: Cuts wet, frozen, pressure treated and hard wood without binding, Easy Plug Removal: Patented design allows easy plug removal, Cuts At An Angle: Unique design provides the ability to cut at an angle LENOX
3/4" Carbide Grit Hole Saws 1-3/8" Depth
Locke Part #: T1135 MFG Part #: 625.1216
Diameters 3/4" through 4-1/8", Works in rotary and SDS Hammer mode, Works forward and reverse, Use standard or SDS shank arbors, Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster., Concrete pavers., Drill a hole through cement takes less than 7 seconds. MAG-BIT
3/4" Carbide Tipped Hole Cutter
Locke Part #: T1122 MFG Part #: 626.1216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
3/8" Arbor for 20L-96L
Locke Part #: T0976 MFG Part #: 1779805
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
4",3" Pipe & Coupling
Locke Part #: T0919 MFG Part #: 2546464HC
3 times faster than hole saws, Safer and less torque than self-feed bits, easy plug ejection, cuts more than 300 holes before resharpening. LENOX
4-1/2" Speed Slot Hole Saw
Locke Part #: T1999 MFG Part #: 3007272L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
4-1/8" Hole Saw
Locke Part #: T0995 MFG Part #: 66L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
4-3/8" Hole Saw
Locke Part #: T0996 MFG Part #: 70L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
4-5/8" Hole Saw
Locke Part #: T2000 MFG Part #: 74L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
4-5/8", 4" Pipe
Locke Part #: T0920 MFG Part #: 25474-74HC
3 times faster than hole saws, Safer and less torque than self-feed bits, easy plug ejection, cuts more than 300 holes before resharpening. LENOX
Bi-Metal,Tough 3/16" Thick Back Plate, 1-3/4" Depth cuts through 2" x 4" in one easy pass, For improved chip removal., 4/6 Variable Pitch Tooth combination, reduces vibration, Increases productivity Deep Gullet design MAG-BIT
5-1/4" Bi-Metal Hole Saw
Locke Part #: T1148 MFG Part #: 624.8416
MAG-BIT
Quick Change, :, Faster and easier to engage / disengage hole saw, Prevents Threads From Stripping, :, Drives off pins, not threads, No Tools Needed, :, Prevents hole saw from locking on arbor, No Adaptor Required, :, Arbor threads directly into all hole saws, Easier Plug Removal LENOX
6 Blade Hole Saw Kit
Locke Part #: T0970 MFG Part #: 600L
Blades, arbors, pilot drills & a plastic case. Blade sizes: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2". Arbors: 2L, 5L. One 4321 pilot drill. 1 arbor adapter. LENOX
625 Carbide Grit Hole Saws Plumber's Kit
Locke Part #: T1147 MFG Part #: 625.9308
Contains, 1 each: 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4", Arbors:, 1/4" hex, 7/16" quick change, 1/4" pilot bit MAG-BIT
Quick Change, :, Faster and easier to engage / disengage hole saw, Prevents Threads From Stripping, :, Drives off pins, not threads, No Tools Needed, :, Prevents hole saw from locking on arbor, No Adaptor Required, :, Arbor threads directly into all hole saws, Easier Plug Removal LENOX
7 Piece Contractors Hole Saw Kit
Locke Part #: T2241 MFG Part #: 1815140
Includes:, 7/8", 1-1/8", 1-3/8", 1-1/2", 2", Snap-Back Arbors: 2L, 5L LENOX
7 Piece Plumbers Hole Saw Kit
Locke Part #: T2242 MFG Part #: 1815195
Includes:, 1-1/4", 1-3/8", 1-1/2", 2", 2-1/2", Snap-Back Arbors: 2L, 5L LENOX
7/8" Carbide Tipped Hole Cutter
Locke Part #: T1123 MFG Part #: 626-1416
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
7/8" Hole Saw
Locke Part #: T0980 MFG Part #: 14L
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
High carbide tipped steel, Fish eye hole for pulling wire, Packaged / Bulk program available Carbide tipped masonry drills., Drills for boring masonry fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling MAG-BIT
High carbide tipped steel, Fish eye hole for pulling wire, Packaged / Bulk program available Carbide tipped masonry drills., Drills for boring masonry fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling MAG-BIT
8 Piece Electricians Hole Saw Kit
Locke Part #: T2240 MFG Part #: 1815139
Includes:, 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", Snap-Back Arbors: 2L, 5L LENOX
Plug Removal As Easy As 1-2-3, :, SPEED SLOT, features a staircase design for easy plug removal, Up To 2x Life In Metal Cutting, :, Enhanced tooth geometry, a thin kerf design, and an advanced coating contribute to the efficiency of the cutting process LENOX
Plug Removal As Easy As 1-2-3, :, SPEED SLOT, features a staircase design for easy plug removal, Up To 2x Life In Metal Cutting, :, Enhanced tooth geometry, a thin kerf design, and an advanced coating contribute to the efficiency of the cutting process LENOX
Carbide Tipped Hole Cutter Kit
Locke Part #: T1134 MFG Part #: 626.KIT1
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. Contains 1 each: 7/8",, 1-1/8", 1-3/8", TCT hole cutter spare pilot bit, ejector spring and hex wrench. Cutters in the kit provide conduit entry for 1/2", 3/4" and 1" conduit. MAG-BIT
Long Lasting: Continuous, brazed edge lasts longer in tile and stone., Fast Easy Cutting: Low torque little pressure required., Easier Plug Removal: Over sized slot in hole saw for easy plug removal. LENOX
Electricians Carbide Grit Hole Saw Kit
Locke Part #: T1146 MFG Part #: 625.9108
Contains 1 each: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2". Arbors: 7/16" hex, 7/16" quick change, 1/4" pilot bit. MAG-BIT
Electricians Hole Saw Kit
Locke Part #: T0994 MFG Part #: 1200L
Blade sizes: 3/4",7/8", 1-1/8", 1-3/8",, 1-3/4", 2", 2-1/2", 2-11/16 , 3", 3-5/8",, 4-1/8", 4-3/4". Arbors: 2L, 5L. Two 4321 and one 56PD pilot drills. Includes: plastic case, 12 sizes, 2 arbors and 3 pilot drills LENOX
Pilot Bit fits 1L,2L,4L
Locke Part #: T0975 MFG Part #: 4321/1779771
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
Pilot Bit fits 3L,5L,6L,7L
Locke Part #: T0978 MFG Part #: 56PD
Features: Bi-metal construction, M-2 high speed steel cutting edge, tooth hardness Rc 63-65, Vari-tooth design, positive rake tooth, 1-1/2" cutting depth & 3/16" thick heavy-duty backing plate. LENOX
Pilot Drill Bit
Locke Part #: T3126 MFG Part #: EL5001
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
Plumbers Hole Saw Kit.
Locke Part #: T0977 MFG Part #: 1200P
Blade sizes: 3/4", 7/8", 1-1/8", 1-1/2",, 1-3/4", 2-1/4", 2-9/16, 3", 3-1/2", 4",, 4-1/4", 4-1/2". Arbors: 2L, 5L. Two 4321 and one 56PD pilot drills. Includes: plastic case, 12 sizes, 2 arbors and 3 pilot drills LENOX
Plumbers Kit
Locke Part #: T1370 MFG Part #: D180001 V
Includes:, 3/4", 7/8", 1-1/8", 1-1/2",, 1-3/4", 2-1/4", Optimized tooth design for superior performance while cutting metal, M3 steel provides longer life than the M2 steel of the industry standard product, Hardened backing plates prevent warping thus allowing for easier removal from the mandrel, Versatility of Deep Cut style allows users to cut either wood or metal DEWALT
Ruler Axle for T3113
Locke Part #: T3114 MFG Part #: EL5003
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
Ruler Axle for T3115
Locke Part #: T3119 MFG Part #: EL6003
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING