Loading ...

Loading ...

Search in: Residential Category

Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), HUD Certified, NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 or 10 Years Limited Tank and Component Parts, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 20 in D x 59-1/8 in H, Domestic/Import: Domestic Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow, Piezo igniter - Easy and quick lighting of the pilot burner by push button, Pedestal base - Rugged and durable base allows easy transport and positioning, while providing corrosion-resistant contact with floor, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Housing and urban development - This water heater is designed in accordance with H.U.D. and is certified for installation in a manufactured home (mobile home) only, Must order roof jack kit for new installations, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Fully automatic controls - Automatic temperature selection at your fingertips, Built-in energy cut-off switch prevents abnormally high water temperature for extra safety, built-in gas pressure regulation, Convertible gas control - Easily convertible control for use with either propane or natural gas, Insulation system - 2 in Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity, Water connections -3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Heat traps - Installed on hot water outlet to minimize heat loss through piping, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble-free service, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, Flue baffle - Maximizes the amount of heat absorbed by the tank and reduces heat loss during standby periods, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632794690
Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Side Temperature and Pressure Relief Valve, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0064, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803125
Country of Origin: US, Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), HUD Certified, NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Pressure Rating: 10 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 22 in D x 59-3/8 in H, Domestic/Import: Domestic Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Pedestal base, Maintenance free, Sight window, Roof jack kit, Vitraglas lining, Fully automatic controls, Convertible gas control, 2 in non-CFC foam insulation, Water connections, Heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Flue baffle, Low restriction brass drain valve, Home atmospheric vent gas water heater Bradford White 671632794706
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), Energy Saver Certified, NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 or 10 Years Limited Tank Warranties/6 Years Limited on Component Parts, Heating Capacity: 85000, Gas Connection: 1/2, Tank Capacity: 100, Vent Size: 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Atmospheric, Recovery Rate: 92 gph at 90 deg F, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 28-1/4 in Dia x 68-11/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Factory installed Hydrojet 2 total performance system - Cold water inlet sediment reducing device helps prevent sediment build up in tank and increases first hour delivery of hot water, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Side connections - 3/4 in NPT tapping's that allow easy connections for space heating applications (potable water only), Non-CFC foam insulation - Covers the sides and top of tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity [M-I-75 has 1-1 /4 in and M-I-100T has 2 in, 75 gal pedestal base, Water connections - Factory installed true dielectric fittings extend water heater life and ease installation (M-I-75S has 1 in NPT and M-I-100T has 1-1/4" in NPT), Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Protective magnesium anode rod, 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White
Package Length: 16.375, Package Height: 57.125, Package Width: 20.875, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 27000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 29 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 19-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632824748
Package Length: 16.375, Package Height: 57.125, Package Width: 20.875, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 27000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 29 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 19-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, WR controls Bradford White 671632854202
Package Length: 20.75, Package Height: 59.0, Package Width: 18.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 61-1/2 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632819010
Package Length: 20.75, Package Height: 59.0, Package Width: 18.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 61-1/2 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632824489
Package Length: 20.75, Package Height: 59.0, Package Width: 18.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 61-1/2 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, WR controls Bradford White 671632854219
Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632818907
Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632824496
Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, WR controls Bradford White 671632850143
Package Length: 25.4375, Package Height: 57.25, Package Width: 20.625, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Pressure Rating: 150, Series: TTW, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0066, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 49 in D x 57-5/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632791897
Package Length: 25.4375, Package Height: 57.25, Package Width: 20.625, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 38000, Gas Connection: 1/2, Tank Capacity: 40, Pressure Rating: 150, Series: TTW, Fuel Type: Liquid Propane, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 41 gph at 90 deg F, Energy Efficiency: 0.0066, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 24-3/4 in D x 57-5/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632796182
Package Length: 27.0, Package Height: 58.0, Package Width: 22.125, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 50, Pressure Rating: 150, Series: TTW, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0065, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-3/4 in D x 58-1/4 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632794836
Package Length: 27.0, Package Height: 58.0, Package Width: 22.125, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 38000, Gas Connection: 1/2, Tank Capacity: 50, Pressure Rating: 150, Series: TTW, Fuel Type: Liquid Propane, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 41 gph at 90 deg F, Energy Efficiency: 0.0065, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-3/4 in D x 58-1/4 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632796199
Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0064, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803125
Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 33 gph at 90 deg F, Energy Efficiency: 0.0064, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632794621
Country of Origin: US, Package Length: 23.9375, Package Height: 49.25, Package Width: 22.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 25-1/2 in D x 51-3/4 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803149
Country of Origin: US, Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803163
Country of Origin: US, Package Length: 22.875, Package Height: 58.875, Package Width: 24.4375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 25-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803248
Country of Origin: US, Package Length: 22.625, Package Height: 57.25, Package Width: 27.5, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 38000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Atmospheric, Recovery Rate: 41 gph at 90 deg F, Energy Efficiency: 0.0067, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-1/8 in D x 54-1/2 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Automatic flue damper - Reduces stand-by heat loss, resulting in less gas consumption, higher energy factor ratings, and improved overall efficiency, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter, Low restrictive brass drain valve - Durable tamper proof design Bradford White 671632790258
Country of Origin: US, Package Length: 27.0, Package Height: 66.8125, Package Width: 22.0125, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Top Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 4, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0067, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-1/8 in D x 63-1/2 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Automatic flue damper - Reduces stand-by heat loss, resulting in less gas consumption, higher energy factor ratings, and improved overall efficiency, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter, Low restrictive brass drain valve - Durable tamper proof design Bradford White 671632790272
Country of Origin: US, Package Length: 27.0, Package Height: 66.8125, Package Width: 22.0125, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Heating Capacity: 65000, Gas Connection: 1/2, Tank Capacity: 48, Pressure Rating: 150, Series: TTW, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Power, Vent Size: 3 in, 4 in, Recovery Rate: 70 gph at 90 deg F, Energy Efficiency: 0.007, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-3/4 in D x 66-1/8 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632792573
Country of Origin: US, Mfg Standards/Approvals: AHRI Certified, cULus Listed, ENERGY STAR Certified, NAECA, NSF/ANSI 372, UL Listed, Application: Residential Indoor Basement, Garage, Closet, Utility Room, Attic, Warranty: 10 Years Limited Tank and Component Parts, Tank Capacity: 50, Voltage Rating: 208/240, Amperage Rating: 30, Phase: 1, Water Connection: 3/4, Pressure Rating: 150, Temperature Rating: 35 to 120, Type: Electric Mode, Series: AeroTherm, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Mounting Type: Floor, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 21-3/4 in Dia x 60-3/4 in H, Domestic/Import: Domestic The AeroTherm series control panel - Provides detailed diagnostic information including water heater fault codes, tank codes, need-to-assess codes and heat pump codes, Additional functions allow you to monitor the status of temperature sensing thermistors and heating components, User-friendly, easy to read display, LEDs clearly indicate the current operating mode, Display communicates current status, mode and set point and displays error messages when applicable, Electric mode - Operates like a standard electric water heater and eliminates the air flow and sound from the heat pump system when preferred (fastest recovery time, but least energy efficient), Quiet operation - Operating sound level of approximately 55 dBA, Can be laid down for easier transportation - Easy-to-open, protective packaging, Easily accessible top mounted washable air filter - User is automatically alerted when the air filter needs to be cleaned, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water screw-in style, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, This results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Installed temperature and pressure relief valve, Low restrictive brass drain valve - Durable tamper proof design Bradford White 671632797233
Package Length: 10.875, Package Height: 15.625, Package Width: 12.25, Mfg Standards/Approvals: ASHRAE 90.1b, cETLus Listed, CSA Certified, NSF 372, UL 174 Certified, Application: Residential, Includes: Temperature and Pressure Relief Valve and 4 ft Cord with 3-Prong Grounded Plug, Warranty: 6 Years, Tank Capacity: 2, Voltage Rating: 120, Power Rating: 1500, Phase: 1, Pressure Rating: 150, Type: Utility, Series: RE1-2U6, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 7 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 9-7/8 in Dia x 12-1/4 in H Compact design - Can be mounted almost anywhere - under a sink, inside cabinets or hung on a wall and is perfect for wash station applications, Fully automatic thermostat control - Fast acting surface-mount thermostat for automatic temperature control, Factory installed sensitive manual reset energy cut-off for safety to prevent overheating, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas formula is fused to the steel surface by firing at a temperature of over 1600 deg F, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and ease installation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Steel jacket -With special coating that inhibits rust and corrosion, Non-simultaneous operation Bradford White 671632806515
Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 12, Voltage Rating: 120, Power Rating: 1500, Phase: 1, Pressure Rating: 150, Type: Utility, Series: RE112T6, Water Connection: 3/4 in NPT, Recovery Rate: 7 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 14 in Dia x 27-3/4 in H Fully automatic thermostat control - Fast acting surface-mount thermostat for automatic temperature control, Factory installed sensitive manual reset energy cut-off for safety to prevent overheating, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, 1 in non-CFC foam insulation - covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory-supplied true dielectric fittings extend water heater life, Located on the side for easier installation (Fittings packaged separately inside carton), Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with Part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White 671632798766
Country of Origin: US, Package Length: 19.875, Package Height: 28.625, Package Width: 18.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 19, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Lowboy, Series: RE120L6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 18 in Dia x 24-7/8 in H, Domestic/Import: Domestic Low restriction brass drain valve - Durable tamper proof design, Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation - Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory Bradford White 671632798797
Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 19, Voltage Rating: 120, Power Rating: 1500, Phase: 1, Pressure Rating: 150, Type: Utility, Series: RE120U6, Water Connection: 3/4 in NPT, Heating Element: (1) Incoloy Stainless Steel, Recovery Rate: 7 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 464 mm H Fully automatic thermostat control - Fast acting surface-mount thermostat for automatic temperature control, Factory installed sensitive manual reset energy cut-off for safety to prevent overheating, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, 1 in non-CFC foam insulation - covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory-supplied true dielectric fittings extend water heater life, Located on the side for easier installation (Fittings packaged separately inside carton), Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with Part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White 671632798780
Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 6, Voltage Rating: 120, Power Rating: 1500, Phase: 1, Pressure Rating: 150, Type: Utility, Series: RE16U6, Water Connection: 3/4 in NPT, Recovery Rate: 7 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 257 mm H Fully automatic thermostat control - Fast acting surface-mount thermostat for automatic temperature control, Factory installed sensitive manual reset energy cut-off for safety to prevent overheating, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, 1 in non-CFC foam insulation - covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory-supplied true dielectric fittings extend water heater life, Located on the side for easier installation (Fittings packaged separately inside carton), Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with Part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Alternate top water connections - Models have alternate 3/4 in water connection tappings on top, Non-simultaneous operation Bradford White 671632798735
Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 28, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Lowboy, Series: RE230L6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 778 mm H Low restriction brass drain valve - Durable tamper proof design, Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation - Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory Bradford White 671632794393
Country of Origin: US, Package Length: 33.8125, Package Height: 34.0, Package Width: 22.75, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: 2 in THK Insulation Blanket, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 28, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Lowboy, Series: RE230L6, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Incoloy, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 29-7/8 in H, Domestic/Import: Domestic Low restriction brass drain valve - Durable tamper proof design, Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation - Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory, Incoloy copper screw type immersion element Bradford White 671632825455
Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 38, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Lowboy, Series: RE240L6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 854 mm H Low restriction brass drain valve - Durable tamper proof design, Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation - Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory Bradford White 671632794409
Country of Origin: US, Package Length: 30.625, Package Height: 36.5, Package Width: 24.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: 2 in THK Insulation Blanket, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 38, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Lowboy, Series: RE240L6, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 24 in Dia x 32-5/8 in, Domestic/Import: Domestic Low restriction brass drain valve - Durable tamper proof design, Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation - Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory Bradford White 671632806447
Country of Origin: US, Package Length: 32.375, Package Height: 49.0, Package Width: 20.5, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: 2 in THK Insulation Blanket and Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 40, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE240S6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Incoloy, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, Tall or Short: Short, ASME Yes/No: No, Material: Steel, Dimensions: 20 in Dia x 48 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White 671632851515
Country of Origin: US, Package Length: 32.625, Package Height: 36.875, Package Width: 26.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: 2 in THK Insulation Blanket, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 47, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Lowboy, Series: RE250L6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Incoloy, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 26 in Dia x 33-5/8 in H, Domestic/Import: Domestic Low restriction brass drain valve - Durable tamper proof design, Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation - Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory, Incoloy copper screw type immersion element Bradford White 671632851508
Country of Origin: US, Package Length: 33.1875, Package Height: 48.0, Package Width: 22.75, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: 2 in THK Insulation Blanket and Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 50, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE250S6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Incoloy, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, Tall or Short: Short, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 47 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White 671632851522
Mfg Standards/Approvals: AHRI Certified, cWater Qualityus Certified, ENERGY STAR Qualified, UL Listed, Application: Residential, Warranty: 10 Years Limited Tank and Component Parts, Tank Capacity: 80, Voltage Rating: 208/240, Amperage Rating: 30, Phase: 1, Pressure Rating: 150, Temperature Rating: 35 to 120, Series: AeroTherm, Power Rating: 3500/3000 W at 208 VAC/4500/4000 W at 240 VAC, Water Connection: 3/4 in NPT, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 71-1/8 in H The AeroTherm series control panel - Provides detailed diagnostic information including water heater fault codes, tank codes, need-to-assess codes and heat pump codes monitor the status of temperature sensing thermistors and heating components, User-Friendly, easy to read display, LEDs clearly indicate the current operating mode, Display communicates current status, mode and set point and displays error messages when applicable, Operating modes offer flexibility, Heat pump (only) mode - Maximizes consumer savings, the most energy efficient mode as it only utilizes the heat pump, Hybrid mode - Saves while experiencing fast recovery, hybrid mode is the factory setting combining heat pump efficiency and savings with recovery rates of standard electric when needed, Electric (only) mode - Operates like a standard electric water heater and eliminates the air flow and sound from the heat pump system when preferred (fastest recovery time, but least energy efficient), Vacation mode - Adjusts the temperature set point down to 50 deg F for extended periods of time, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Quiet operation - Operating sound level of approximately 55 DBA, Can be laid down for easier transportation - Easy-to-open, protective packaging, Easily accessible top mounted washable air filter - User is automatically alerted when the air filter needs to be cleaned, Operating air temperature range of 35 to 120 deg F for the heat pump, Backup electric heating elements, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water Bradford White 671632797240
Country of Origin: US, Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 30, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE330S6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 1213 mm H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat for automatic temperature control, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed Hydrojet total performance system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and ease installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Non-simultaneous operation indicates when one element is being heated at a time, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency Bradford White 671632790937
Mfg Standards/Approvals: AHRI Certified, CEC Listed, CSA Certified, ETL and HUD Listed, ETLus Intertek and cETLus Intertek, Application: Residential, Includes: 2 in THK Insulation Blanket and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 30, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE330S6, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.92, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 20 in Dia Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Heaters are wired inter-locking, Non-simultaneous operation Bradford White
Country of Origin: US, Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 40, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE340S6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 1235 mm H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat for automatic temperature control, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed Hydrojet total performance system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and ease installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Non-simultaneous operation indicates when one element is being heated at a time, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency Bradford White 671632790913
Country of Origin: US, Package Length: 22.375, Package Height: 51.5, Package Width: 22.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 40, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE340S6, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Incoloy, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, Tall or Short: Short, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 47-7/8 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White 671632815852
Country of Origin: US, Mfg Standards/Approvals: AHRI Certified, CSA Certified, ETL Listed, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 40, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE340T6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 1559 mm H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat for automatic temperature control, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed Hydrojet total performance system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and ease installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Non-simultaneous operation indicates when one element is being heated at a time, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency Bradford White 671632790951
Mfg Standards/Approvals: AHRI Certified, CEC Listed, CSA Certified, ETL and HUD Listed, ETLus Intertek and cETLus Intertek, Application: Residential, Includes: 2 in THK Insulation Blanket and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 40, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE340T6, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.93, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 20 in Dia Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Heaters are wired inter-locking, Non-simultaneous operation Bradford White 671632790951
Country of Origin: US, Package Length: 24.375, Package Height: 51.5, Package Width: 24.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 50, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE350S6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Incoloy, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, Tall or Short: Short, ASME Yes/No: No, Material: Steel, Dimensions: 24 in Dia x 47 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White
Country of Origin: US, Package Length: 22.375, Package Height: 62.75, Package Width: 22.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 50, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE350T6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Incoloy, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 58-5/8 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White
Country of Origin: US, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified, Application: Residential, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Tank Capacity: 50, Voltage Rating: 208/240, Phase: 1, Pressure Rating: 150, Type: Upright, Series: RE350T6, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Energy Efficiency: 0.95, Recovery Rate: 21 gph at 90 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 58-5/8 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Low restrictive brass drain valve - Durable tamper proof design, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Screw-in style element, Factory installed hydrojet total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency, Non-simultaneous operation Bradford White 671632790968
Country of Origin: US, Package Length: 35.5, Package Height: 71.0, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASSE Approved, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 85000, Gas Connection: 1/2, Tank Capacity: 100, Vent Size: 4, Energy Efficiency: 80, Pressure Rating: 150, Type: High Input, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 92 gph at 90 deg F, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 31-1/2 in D x 69 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas ) is fused to the steel surface by firing at a temperature of over 1600 deg F, Side connect model - 3/4 in NPT tapping's that allow easy connections for space heating applications, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - Factory installed true dielectric fittings extend water heater life and simplify water line connections, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble-free service, Low restriction brass drain valve - Durable tamper proof design, NOx emission - Less than 40 ng/J Bradford White 671632790173
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0064, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 59-15/16 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632791644
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 25-1/2 in D x 51-3/4 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632791675
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632791682
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 36000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632794638
Country of Origin: US, Package Length: 22.875, Package Height: 58.875, Package Width: 24.4375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASSE Approved, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 65000, Gas Connection: 1/2, Tank Capacity: 48, Vent Size: 4, Pressure Rating: 150, Type: High Input, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 70 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26 in D x 60 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas ) is fused to the steel surface by firing at a temperature of over 1600 deg F, Side connect model - 3/4 in NPT tapping's that allow easy connections for space heating applications, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - Factory installed true dielectric fittings extend water heater life and simplify water line connections, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble-free service, Low restriction brass drain valve - Durable tamper proof design, NOx emission - Less than 40 ng/J Bradford White 671632790159
Country of Origin: US, Package Length: 22.875, Package Height: 58.875, Package Width: 24.4375, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 61000, Gas Connection: 1/2, Tank Capacity: 48, Vent Size: 4, Pressure Rating: 10, Type: High Input, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 66 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26 in D x 60 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Factory installed Hydrojet sediment reduction system and FVIR Defender Safety System, Vitraglas lining, Side connect model, Non-CFC foam insulation, Pedestal base, Water connections, Protective magnesium anode rod, 4 in snap lock draft diverter, Low restriction brass drain valve, Hydronic and Space Heating, Atmospheric vent high input gas water heater Bradford White 671632792825
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 25-1/2 in D x 60-5/16 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632791699
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 35000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 41 gph at 90 deg F, Energy Efficiency: 0.0062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 25-1/2 in D x 60-5/16 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632794645
Warranty: 6 years parts Bradford White ICON System—Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, No need for external electricity, Factory-Installed Hydrojet 2 ™ Total Performance System—Cold water inlet sediment reducing device helps prevent sediment build-up in tank, Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Side Connections—3/4" (19mm) NPT tappings that allow easy connections for space heating applications (potable water only), Insulation System—Non-CFC foam covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity, Water Connections—Factory-installed true dielectric fittings extend water heater life and simplify water line connections, Hand Hole Cleanout—Allows inspection of tank interior and facilitates the removal of sediment deposits (RG2100H6N models only), Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service, 4" (107mm) “Snap Lock” Draft Diverter, T&P Relief Valve—Installed, Thermostatic Mixing Valve (ASSE Approved)—Included with RG155H6N only, NOx Emissions – Less than 40 ng/J Bradford White 671632790203 
Bradford White ICON System—Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, No need for external electricity, Factory-Installed Hydrojet 2 ™ Total Performance System—Cold water inlet sediment reducing device helps prevent sediment build-up in tank, Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Side Connections—3/4" (19mm) NPT tappings that allow easy connections for space heating applications (potable water only), Insulation System—Non-CFC foam covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity, Water Connections—Factory-installed true dielectric fittings extend water heater life and simplify water line connections, Protective Magnesium Anode Rod—Provides added protection against corrosion for long-term, trouble-free service, 4" (107mm) “Snap Lock” Draft Diverter, T&P Relief Valve—Installed, Thermostatic Mixing Valve (ASSE Approved)—Included with RG155H6N only, NOx Emissions – Less than 40 ng/J Bradford White 671632792863
Mfg Standards/Approvals: AHRI Certified, CSA LLC - Low Lead Compliant Certified, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 76000, Gas Connection: 1/2, Tank Capacity: 75, Vent Size: 4, Energy Efficiency: 80, Pressure Rating: 150, Type: High Input, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 82 gph at 90 deg F, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 27-1/4 in D x 62-5/8 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas ) is fused to the steel surface by firing at a temperature of over 1600 deg F, Side connect model - 3/4 in NPT tapping's that allow easy connections for space heating applications, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - Factory installed true dielectric fittings extend water heater life and simplify water line connections, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble-free service, Low restriction brass drain valve - Durable tamper proof design, NOx emission - Less than 40 ng/J Bradford White 671632790166
Country of Origin: US, Package Length: 29.5, Package Height: 60.3125, Package Width: 26.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 76000, Gas Connection: 1/2, Tank Capacity: 75, Vent Size: 4, Energy Efficiency: 80, Pressure Rating: 4, Type: High Input, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 82 gph at 90 deg F, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 27-1/4 in D x 66-5/8 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Side connect model, Non-CFC foam insulation, Pedestal base, Water connections, Protective magnesium anode rod, 4 in snap lock draft diverter, Low restriction brass drain valve, WR controls, Atmospheric vent high input short gas water heater Bradford White 671632806843
Mfg Standards/Approvals: AHRI Certified, CSA LLC - Low Lead Compliant Certified, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 76000, Gas Connection: 1/2, Tank Capacity: 75, Vent Size: 4, Pressure Rating: 150, Type: High Input, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 82 gph at 90 deg F, Energy Efficiency: 0.0062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 27-1/4 in D x 62-5/8 in H Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas ) is fused to the steel surface by firing at a temperature of over 1600 deg F, Side connect model - 3/4 in NPT tapping's that allow easy connections for space heating applications, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - Factory installed true dielectric fittings extend water heater life and simplify water line connections, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble-free service, Low restriction brass drain valve - Durable tamper proof design, NOx emission - Less than 40 ng/J Bradford White 671632792856
Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 76000, Gas Connection: 1/2, Tank Capacity: 75, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Power, Vent Size: 3 in, 4 in, Recovery Rate: 82 gph at 90 deg F, Energy Efficiency: 0.8, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 30-3/4 in D x 69-7/16 in H Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Atmospheric vent gas water heater Bradford White 671632792986
Mfg Standards/Approvals: ANSI Z21.10.3, AHRI certified, ASME, CSA 4.3-2015, Energy Star Qualified, NSF 5, Type: Condensing, Series: NPE, Heating Capacity: 15000 to 150000 Btu/hr, Fuel Type: Natural/Propane Gas, Gas Connection: 3/4 in NPT, Ignition Type: Electronic, Vent Type: Forced Draft Direct, Vent Size: 2 or 3 in, Flow Rate: 8.4 gpm, Energy Efficiency: 97%, Mounting Type: Wall, Water Connection: 3/4 in NPT, Pressure Rating: 15 to 150 psi, Ultra Low NOx: Yes, Material: Carbon Steel, Dimensions: 27.4 in H x 17.3 in W x 13.2 in D Ultra condensing efficiency, Navien condensing technology offers the high efficiency, Money and energy savings over tank type water heaters and traditional water heaters, Two stainless steel heat exchangers, Provides longer life expectancy as they are highly resistant and corrosion and erosion compared to copper heat exchangers, Reduces minerals deposits, Low NOx emissions (= 20ppm), New metal fiber burner is designed to deliver a consistent air/gas mixture improving combustion efficiency, Result in less acid rain and less green house effect, Comply with SCAQMD 1146.2 strict NOx emissions standard, 2 in PVC, CPVC, polypropylene venting up to 60 ft, 3 in vents can be used up to 150 ft with standard 2 x 3 in adapters, Utilizes existing 1/2 in gas line, The negative pressure gas valve and fan with dual venturi operation allows for better adaptability to low gas pressure applications, Makes it possible for the NPE to be installed in gas lines up to 24 in, Field convertible, NPE models allow for easy convertibility from NG to LP, Less water pressure drop, Simple modular for water path minimizes water pressure drop, Modular design for water path make maintenance easier and service can be performed easily in the field KD Navien 884954974194
Mfg Standards/Approvals: ANSI Z21.10.3, AHRI certified, ASME, CSA 4.3-2015, Energy Star Qualified, NSF 5, Type: Condensing, Series: NPE, Heating Capacity: 19900 to 180000 Btu/hr, Fuel Type: Natural/Propane Gas, Gas Connection: 3/4 in NPT, Ignition Type: Electronic, Vent Type: Forced Draft Direct, Vent Size: 2 or 3 in, Flow Rate: 10.1 gpm, Energy Efficiency: 97%, Mounting Type: Wall, Water Connection: 3/4 in NPT, Pressure Rating: 15 to 150 psi, Ultra Low NOx: Yes, Material: Carbon Steel, Dimensions: 27.4 in H x 17.3 in W x 13.2 in D Ultra condensing efficiency, Navien condensing technology offers the high efficiency, Money and energy savings over tank type water heaters and traditional water heaters, Two stainless steel heat exchangers, Provides longer life expectancy as they are highly resistant and corrosion and erosion compared to copper heat exchangers, Reduces minerals deposits, Low NOx emissions (= 20ppm), New metal fiber burner is designed to deliver a consistent air/gas mixture improving combustion efficiency, Result in less acid rain and less green house effect, Comply with SCAQMD 1146.2 strict NOx emissions standard, 2 in PVC, CPVC, polypropylene venting up to 60 ft, 3 in vents can be used up to 150 ft with standard 2 x 3 in adapters, Utilizes existing 1/2 in gas line, The negative pressure gas valve and fan with dual venturi operation allows for better adaptability to low gas pressure applications, Makes it possible for the NPE to be installed in gas lines up to 24 in, Field convertible, NPE models allow for easy convertibility from NG to LP, Less water pressure drop, Simple modular for water path minimizes water pressure drop, Modular design for water path make maintenance easier and service can be performed easily in the field KD Navien 884954974187
Mfg Standards/Approvals: ANSI Z21.10.3, AHRI certified, ASME, CSA 4.3-2015, Energy Star Qualified, NSF 5, Type: Condensing, Series: NPE, Heating Capacity: 19900 to 199900 Btu/hr, Fuel Type: Natural/Propane Gas, Gas Connection: 3/4 in NPT, Ignition Type: Electronic, Vent Type: Forced Draft Direct, Vent Size: 2 or 3 in, Flow Rate: 11.2 gpm, Energy Efficiency: 97%, Mounting Type: Wall, Water Connection: 3/4 in NPT, Pressure Rating: 15 to 150 psi, Ultra Low NOx: Yes, Material: Carbon Steel, Dimensions: 27.4 in H x 17.3 in W x 13.2 in D Ultra condensing efficiency, Navien condensing technology offers the high efficiency, Money and energy savings over tank type water heaters and traditional water heaters, Two stainless steel heat exchangers, Provides longer life expectancy as they are highly resistant and corrosion and erosion compared to copper heat exchangers, Reduces minerals deposits, Low NOx emissions (= 20ppm), New metal fiber burner is designed to deliver a consistent air/gas mixture improving combustion efficiency, Result in less acid rain and less green house effect, Comply with SCAQMD 1146.2 strict NOx emissions standard, 2 in PVC, CPVC, polypropylene venting up to 60 ft, 3 in vents can be used up to 150 ft with standard 2 x 3 in adapters, Utilizes existing 1/2 in gas line, The negative pressure gas valve and fan with dual venturi operation allows for better adaptability to low gas pressure applications, Makes it possible for the NPE to be installed in gas lines up to 24 in, Field convertible, NPE models allow for easy convertibility from NG to LP, Less water pressure drop, Simple modular for water path minimizes water pressure drop, Modular design for water path make maintenance easier and service can be performed easily in the field KD Navien 884954974170
Package Weight: 82, Mfg Standards/Approvals: AHPRI Certified, CSA Certified, Energy Stear Approved, LowNox Emission Certified, NSF Approved, Type: Premium Condensing, Series: NPE-A, Heating Capacity: 19900 to 180000 Btu/hr, Fuel Type: Natural/Propane Gas, Gas Connection: 3/4 in NPT, Ignition Type: Electronic, Vent Type: Forced Draft Direct, Vent Size: 2 or 3 in, Flow Rate: 0.5 gpm, Energy Efficiency: 96%, Heating Element: Stainless Steel, Water Connection: 3/4 in NPT, Pressure Rating: 15 to 150 psi, Ultra Low NOx: Yes, Dimensions: 17.3 in W x 27.4 in H x 13.2 in D Ultra condensing efficiency, Low NOx emissions, New metal fiber burner is designed to deliver a consistent air/gas mixture improving combustion efficiency, NPE models allow for easy convertibility from NG to LP, Utilizes existing 1/2 in gas line, Less water pressure drop, Navien and rsquos units have built in controls for multi-unit system allowing easy setting, No extra control boards are required, reducing installation costs, Small and compact wall-hung design allows multi-unit system even in a confined area, Cold rolled carbon steel case, SCH 40, 2 in venting up to 60 ft, ComfortFlow technology, Recognizes hot water usage patterns to intelligently provide hot water when needed, Forced draft direct Venting KD Navien 884954974125
Package Weight: 55, Mfg Standards/Approvals: AHPRI Certified, CSA Certified, Energy Stear Approved, LowNox Emission Certified, NSF Approved, Type: Premium Condensing, Series: NPE-S, Heating Capacity: 18000 to 120000 Btu/hr, Fuel Type: Natural/Propane Gas, Gas Connection: 3/4 in NPT, Ignition Type: Electronic, Vent Type: Forced Draft Direct, Vent Size: 2 or 3 in, Flow Rate: 0.5 gpm, Energy Efficiency: 96%, Heating Element: Stainless Steel, Water Connection: 3/4 in NPT, Pressure Rating: 15 to 150 psi, Ultra Low NOx: Yes, Dimensions: 17.3 in W x 27.4 in H x 13.2 in D Ultra condensing efficiency, Low NOx emissions, New metal fiber burner is designed to deliver a consistent air/gas mixture improving combustion efficiency, NPE models allow for easy convertibility from NG to LP, Utilizes existing 1/2 in gas line, Less water pressure drop, Front panel command center, Navien and rsquos units have built in controls for multi-unit system allowing easy setting, No extra control boards are required, reducing installation costs, Small and compact wall-hung design allows multi-unit system even in a confined area, Cold rolled carbon steel case, SCH 40, 2 in venting up to 60 ft, Forced draft direct Venting KD Navien